Great video Doug. The looper is a pretty good idea and I didn't know you could add effects while playing back the loop. I normally use the looper before playing live for sound checks etc... Thanks for sharing sir. Best wishes 😊😊🎶🎶👍👍

@DougBsDigitalDen

4 ай бұрын

Glad it was helpful! My wife said the same thing when she watched it, she had no idea that you cluld swap FX while the Looper is playing.

@digital-guitars-uk

4 ай бұрын

@@DougBsDigitalDen Thanks again for keeping us up to date and inspired. 🎶🎶🎶🎶😎😎

Good job on this one. I never thought about using the looper first for rig set up. Thanks.

@DougBsDigitalDen

4 ай бұрын

Glad it was helpful!

Hey Doug, Thanks for your videos man, i always watch them during my lunch breaks at my university and they always hype me up so i can't wait to come home and fire up my fender TMP 😁 Greetings from Germany 🎉

@DougBsDigitalDen

4 ай бұрын

That is awesome! Thank you so much!

Foist again! Been looking forward to this one

@DougBsDigitalDen

4 ай бұрын

Hope you enjoyed it!

@Michael...Jackson

4 ай бұрын

@@DougBsDigitalDen I did! Very easy to understand. I may have missed it, but I think an important point to make is that by having the looper in the pre position, you're looping the dry signal, thereby letting the effects alter the looped audio rather than being "baked in" to the loop. The advantage being (for example) reverb tails will ring out rather than being cut off when you hit stop. The question is, what is the use case for putting the looper post effects 🤔

@DougBsDigitalDen

4 ай бұрын

Thanks! About have the Looper in the POST position, one guy said that he uses it during soundcheck. Jonathan @ Casino Guitars uses the Looper in his solo shows. I think it could use some updating for POST purposes, but PRE works perfectly now 👍

Another invaluable video on the TMP! Thank you!

Thanks for this Doug. I've been using Loopers at the end of a signal chain for ages, but never considered using one at the beginning to tweak my presets. Genius!

@DougBsDigitalDen

4 ай бұрын

Glad it was helpful!

Thanks Doug! Wonderful content!

@DougBsDigitalDen

4 ай бұрын

Much appreciated!

excellent!!! many thanks- and I greatly enjoy your videos !

@DougBsDigitalDen

4 ай бұрын

Many thanks!

@michaelbloch6414

4 ай бұрын

@@DougBsDigitalDen Doug- do you do zoom consultations on gear? If so, I’d like to book some time! Please let me know your rates and how to do it, if you provide this service! Thanks

Thank you for another great instructional video, Doug.

@DougBsDigitalDen

4 ай бұрын

You are very welcome 👍

Isn’t there a way to send/receive midi CC commands to the looper. I believe you said it was listed as one of the features in the firmware update. Thanks for the video! 😊

@DougBsDigitalDen

4 ай бұрын

That is correct, the Release Notes do say that - "Added MIDI CC support for Amp Control jacks, Master Volume and Looper command". I haven't been able to find any more info on this, so I sent a message to Fender about it.

Thanks for the video. I didn't catch how you move the looper possition?

@dougb256

4 ай бұрын

Press down the "Exit/HOLD:POSITION" foot switch. When you hold it down, it will switch from POST to PRE. Good catch!

Another great video Doug. Thank you. One thing I want to be able to do with my TM looper but not sure is possible, is to record a track using one preset, switch to a different preset to overdub without the recorded preset sound taking on the switched preset sound. Am I missing something obvious?

@DougBsDigitalDen

4 ай бұрын

You can do that, as long as the have the Looper in the POST position. Do a long press on the EXIT button while in Looper mode and you should see if you are in PRE or POST. If you're in PRE, click the footswitch to switch to POST. Record a loop, press PLAY, switch presets, press OVERDUB and put down another track. Thanks for watching!

I wish I could load or choose brand name speakers to virtually mix in match in amps. Like for the Princeton I could choose from different Eminence or Jensen speakers and/or put a 12 Inch. Just seems like they need more variety of amps. I would even pay for them for a reasonable price. Or maybe I'm missing this as an IR option.

@DougBsDigitalDen

4 ай бұрын

There is an IR Loader option, located in the Pro Control app. However, right now it uses a generic Speaker Impedance Curve (SIC), so IRs may or may not sound correct. But sure, if you have OwnHammer, York Audio etc, they can be used right now.

Does the metronome click? Is there a tick or a closing hi hat sound? I’m looking all over the manual. I can’t find it in the settings. I don’t hear it on videos. Help?

@DougBsDigitalDen

4 ай бұрын

Danny - no, there is no click. Just the flashing LED, and I hope that Fender can add a click to it.

Thanks for the videos! Is there a video on the new Switch Link feature?

@DougBsDigitalDen

4 ай бұрын

Here you go: kzread.info/dash/bejne/Y5-Cy9Gicc_MeMY.html

Hey Doug how did you actually do it again? Great video!!

@dougb256

4 ай бұрын

Press down the "Exit/HOLD:POSITION" foot switch. When you hold it down, it will switch from POST to PRE.

@shellsjoint

4 ай бұрын

Thank you Doug!!!

When I click FS mode it just pulls up the other effects pedals on the preset and I’m unable to access any of the loop settings…

@DougBsDigitalDen

4 ай бұрын

You have to do a long press, not a short click.

@sanityrules2523

4 ай бұрын

Make sure you have the latest firmware update as well.

Love the videos! I guess there is not a memory save for loops? I like to save drum patterns to start loops.

@DougBsDigitalDen

2 ай бұрын

Sorry, no memory save for the loops. Thanks for watching!

Enjoying the TMP Videos Doug! Anyone know if you can save your loop? Mine disappear when I turn the TMP off.

@DougBsDigitalDen

4 ай бұрын

Currently there is no way to save a loop. Thanks for watching!

Thanks, great video! Does the TMP have a digital capo or something equivalent to drop down a half step? Would be nice to not have to use my DigiTech drop

@DougBsDigitalDen

4 ай бұрын

The Drop is a lot more stable. There are 3 pitch shifters, and they work okay for single note runs but warble with chords.

@LoganAddisMusic

4 ай бұрын

@@DougBsDigitalDen thanks for the quick reply, just ordered one today!

Is there a way to use looper on mic/line input? I can use looper on instrument input but not mic/line.

@DougBsDigitalDen

Ай бұрын

Yes you can use the Looper for the Mic/Line input, if that is the only input on your preset. If you're using 2 signal paths with both the Mic/Line and Instrument inputs being used, the Looper will default to the Instrument input.

@noponder

Ай бұрын

@@DougBsDigitalDen Doesn't work for me. I have the mic/line series only in the signal path, no instrument input in parallel with it. Looper says recording but doesn't play. The tuner doesn't work for mic/line either. If there is another setting I missed let me know. I tried everything I could think of.

@noponder

Ай бұрын

I reached out to Fender. This is what they said. To use the looper with the mic/line input, you'll just need to have your preset setup with one of the Instrument+Mic/Line Mix signal path types. The tuner can be enabled for the mic/line input by pressing the Mic/Line button on the bottom right corner of the tuner display (the font will light up blue when the tuner is enabled for a given input).