I like three brass compensated saddles. Seems to work great.

Vintage 3 sandal all day

Looks wise, I'm fine with either, and brass does look better on a tele, but I prefer 6 saddles, the easier it is to intonate the better!

I prefer Glendale compensated 3 brass saddles on a vintage bridge plate. Not cheap, but very good tone & intonation.

I have three teles with the 6 saddle bridges and 4 teles with the vintage. The vintage bridged teles have a feel to them, I don’t have the words to properly describe it. These teles also have vintage tuners. Lucky to finish a song or two without checking the tuning. I guess “personality” would be how I would describe them. They definitely have that

@ManotickGuitarTech

2 күн бұрын

you can't discount "personality" when choosing a guitar

I have a 2020 Tele with the 3 brass saddles and a 1974 Tele Custom with the 3 stainless steel saddles. I luv em both. The Telecaster is the best electric guitar ever made, I think! 😎👍🏻🎸

If you want the traditional 3 brass saddle look, the Gotoh In-Tune bridge is the best out there. I can't stand the raised edges on the traditional bridge, so I vote for a modern bridge with 6 brass saddles.

@JohnAdams-xc5yk

6 сағат бұрын

Joe barden the best I have found and in 2 1/16 and 2 1/8 string spacing

Is Squier” spelled wrong on the wall? 😂

@ManotickGuitarTech

5 күн бұрын

LOL -good catch... I put the dot in the wrong spot!

@K_e_n_

5 күн бұрын

@@ManotickGuitarTech very tiny error, not quite sure how my eye caught it! 😊

@ManotickGuitarTech

5 күн бұрын

@@K_e_n_ I just made a short moving the dot...thanks!

I have both bridges and I prefer the 6 saddle. The brass does sound great and have great sustain.

I have two fender Teles one MIA 1975 custom ans a MIM. The MIA has a fender ash tray brass plate with 6 individual barrel shape brass saddles that fender sold at the time that I replaced the original bridge with in the early 1980s. The MIM Tele has a Wilkinson similar as shown this clip but I also have a Wilkinson 6 individual saddle bridge as well which I may replace on the MIA Tele. I have always liked the look and feel of the ask tray bridge plate never particularly found the non ash tray bridge plates that appealing. I would suggest if wanting a more authentic Std Tele look of older models go for the compromise of the Wilkinson 6 brass saddle ash tray bridge or if you can find one a 2nd hand a brass fender brass one which were manufactured in the 1980s either way you get the best of both worlds of the look, but also the better intonation accuracy.

Oh wow....a local channel in the Ottawa area! Congratulations Steve! 🎸👍

@ManotickGuitarTech

4 күн бұрын

Thanks - been on KZread for almost 4 years... glad you found me.

I’m a tech who prefers the sound of three brass saddles. I feel it has to do with the amount of string pressure on each saddle. I’ve done a fair amount of comparison on my own Teles and always go with vintage style three brass saddles. With proper filing you can intonate them quite accurately.

@ManotickGuitarTech

3 күн бұрын

@@TwangThang57 compensating them definitely helps

I use Graph Tech String Saver saddles on my six saddle Tele. Not only do I never break strings, but the black looks really nice against the chrome. If they alter the tone at all I can't tell the difference. I'm an aging guitarist, my ears are shot.

I buy the vintage six-post bridges with barrel saddles. These bridges have long machine screws and springs. I have been able to secure brass saddles separately which I use to replace the chrome and also drem-cut each of the long machine screws down so they do not extend far beyond the saddle after intonation. While I appreciate the traditional three-post saddles, my goal is to be as precise as possible with intonation, and you aren't going to get as close with the traditional 3-post--even with compensated saddles--no matter how much you want to.

@ManotickGuitarTech

2 күн бұрын

I always suggest cutting the intonation screws down to my customers but they never want to... go figure.

I have a lot of experience with both bridge types, and I notice a clearer, more sustaining tone with the larger mass, and more tention per saddle, vintage bridge.

I find the modern bridge better in several respects. The most obvious, of course, is easy and accurate intonation adjustment. I would never want a "true traditional" saddle that is straight, but the compensated ones are OK. I find the raised lip on the old "ashtray" bridge plate interferes with my playing. There are some "modern" ones that leave this out on the high E side, which is better. Finally, I find the saddle height adjustment screws often stick up too much on traditional. Easy enough to buy new screws or cut them, but most people don't. I must say that the aesthetics of the brass saddles appeal to me more, but from a purely functional point of view, I think the modern bridge is best. Especially if it supports top loading.

9:12 I totally agree with your opinion Steve. At the end of the day, I would choose a 6 saddle just for playing consistency and stability.🎸👍

@ManotickGuitarTech

4 күн бұрын

@@ckelly5141 the 6 saddle G&L bridge is probably the best option blending looks and functionality

Six saddles made of brass, 😊

@ManotickGuitarTech

5 күн бұрын

@@stewy4158 I like that option

It's a tele and tele's need 3 saddles and the vintage raised sides. As far as type of saddles, either brass or threaded steel.

I bought six brass saddles to replace the six steel saddles. The Korean made saddles had tighter thread tolerance for the intonation screws, very solid and tight.

Good to see you back at it. And hope you enjoyed our nations birthday long weekend. I currently have a standard 3 saddle brass bridge on my barncaster, but to be honest I would much prefer to have 3 compensated saddles. That is a saddle where you can adjust both strings individually. I know Solo sells them.

I’m a 3 saddle kind of guy on my 2 Teles. I really think it does sound better. Especially with stainless saddles. The ones I use are Calahan compensated. I also use a top load bridge instead of string through the body. Oh, it does look better.

I have the "Anything but the vintage bridge with brass saddles just looks WRONG." problem. I also feel like it's part of what makes a tele, A Tele.

@ManotickGuitarTech

4 күн бұрын

so true

For what it's worth i was looking at the bridge on a guitar played by a pretty famous player, it had stock saddles that had been bent with vice grips

@ManotickGuitarTech

5 сағат бұрын

@@JohnAdams-xc5yk yeah, that is to help with intonation...seen that before. Not the best solution.

I immediately removed that Standard Bridge and installed a compensated brass three saddle. Mine stays in tune just fine and has no intonation issues up the neck.

I have 5 telecasters and i have compensated brass on 2 and steal on 2 and 6individual on 1 , to be honest the compensated brass sound pretty good but so does the tele with the 6 saddles but that guitar is a custom made for me by a very good luthier in Adelaide South Australia by the name of Brian West of Fretco Guitars so the set up is exceptional .

I like the six saddles. Mine is fab.

Well since this just popped up on my cell phone youtube.....I can just say...I always liked the idea of that triple barrel set up. Mostly because I've had the independent saddles in a couple guitars and they seem to be glitchy in one way or another, I just think simplicity with the others is better.....

Gotoh six-saddle bridge plates on both my Tele and my G&L ASAT. No perceivable loss of "twang" vs. the traditional flanged "ash tray" AFAICT -- e.g. Brent Mason.

@ManotickGuitarTech

2 күн бұрын

Nice!

So much that I swap out (or don't buy guitar) modern for 3 vintage brass saddles.... Sometimes I drop in a Righty bridge in place of the Lefty...not sure it makes much diff. Got 10 Tele's....none have intonation problems.

Not getting off the subject but I save 4 inches off of some strings for cleaning carburetor jets. I like both Bridges by the way . Just finished my walnut Tele project which wasn't a kit with the individual Bridge set up.. It took 3 weeks and turned out nice. It was my 3rd project. Nice video by the way. I used a satin bridge and tuners because I love the look.

@ManotickGuitarTech

2 күн бұрын

satin finish does look sharp

I like Leo's G&L individual brass cylinder saddles. Best of both.

@ManotickGuitarTech

4 күн бұрын

Probably the best solution of them all

Babicz FCH Guitar Bridge

I prefer three brass compensated saddles. I also prefer the bridge to be able to go "both ways", although I always string mine, string through.

I like the modern style in sack give me a roller bridge with through the body stringing

You know that the stainless saddle screws can also vibrate and change your actions settings. It happed to me. The oil-coated screws have better grip. Replace your Stainless ones if you want your action settings to stay put.

@ManotickGuitarTech

3 күн бұрын

@@GCKelloch interesting point, tks

I prefer the brass compensated or graphtec compensated three saddle bridges.

My tele has brass sadle I do like them will stay vintage

Modern. I have both but prefer ability to fine tune intonation AND not rip up my hands. The antique type is authentic and retro and nostalgic and was fixed when the more technical modern bridge was developed. Leo would agree. Do you?

I like the RSD bridge the most ❤

I've got a 2009 MiM Tele and I have attempted to convert from the stock bridge to the vintage. But where I had an issue was the bridge pick up route is wider than the vintage bridge by just enough that you can see a gap. The vintage bridge I have might not be an authentic one as I got it from ebay many years ago, it's got Fender stamped on it but that doesn't make it a fender product! So I just kept the original bridge because as you mentioned, you have more adjustable option than on the vintage style. I keep toying with the idea of a Bigsby, but again you need to address the bridge because the modern style is not compatible, but the vintage style can slots cut to allow the strings to pass over the saddles...

I like the six saddle yes the original is always great but why are you gonna make your job harder and should be easier with the saddle?

I expect the body is poplar, with thin maple veneers. My 1996 Mexican Tele has this combination. It was sunburst until I belt-sanded contours and sprayed it red. I also fitted a six-saddle Gotoh bridge (all brass, chrome plated). The string spacing is 54mm, which suits the neck perfectly. When I played a new Nashville Player Plus model recently, the strings splayed out too wide the further up the neck they went, so I would be interested to know what its string spacing measures (I suspect it's 56mm). If I had that guitar, I'd fit a narrower bridge, and if I had a three-saddle bridge, I'd fit compensated saddles.

@ManotickGuitarTech

13 сағат бұрын

That would explain it...

One works better, one looks better. I also use the G&L bridges a lot. Individual brass saddles, cheap, always have LH available and a decent compromise. I still struggle with that darn low E on Teles tho.

@drewnelson3149

5 күн бұрын

Prices have gone way up. These were under $30 just last year. Still a good bridge, maybe they have improved it.

Modern with brass saddles.

Vintage style with 3 brass saddles for ones in standard (well Eb) tuning, Modern style with FIVE saddles for Open G.

I don't have a Tele. 😢 I love the look of the compensated brass saddles. As for intonation, it wouldn't matter anyway; I'm a rubbish player 😂

I just bought a Squier Tele baritone, which has a vintage style bridge that is not compensated. Being a baritone the intonation was horrible out of the box. Is there a drop in single string adjustable bridge for this? I think this might be a specialized bridge for baritone, but I am not readily finding what I'm looking for anywhere. Thanks for any info...

@ManotickGuitarTech

19 сағат бұрын

@@MatthewSwasta I haven't seen one...maybe you should design it?

3Brass Sadles give a better sound

I have a NEAR Custom shop pelham Blue Tele custom parts built...w/12 radius Fender neck, w/VTG saddles it was literally UN playable, put a modern one in n its my #1 now, besides a 71 strat, 98 PRS, n even a 2016 SwitchBack Country boy Tele..

A lot of the top Tele players still use the old style brass saddles, intonation on those saddles doesn't really seem to be a factor for them, they get around it. A question I would like to ask is, does it really make any difference to the sound or tone if the strings don't go through the body?

Does the vintage bridge ‘drop-in’ in place of the modern or is some drilling required? Be interested to see the swapping process 🙏🎸👌

@ManotickGuitarTech

4 күн бұрын

They are all different - some do, some don't. Check the specs before buying.

@bethoveen3

3 күн бұрын

@@ManotickGuitarTech my modern bridge has 3 srews to the body and the other has 4, i didn't change mine cause it would require reallign everything and drilling new holes so i kept the modern, but i like the vintage look better and i checked this wilkinson bridge too, propably why your video was recommended couple days later hehe

Babicz make a great quality bridge for all model guitars and basses.

Vintage all the way.

Individual saddles of course

Fender 3 saddle “Hotrod” bridge…

Not all Tele bridges interchange, the screw holes don’t always line up… you’ve got to match bridge and bodies. To my knowledge an American Professional bridge won’t directly fit on a MIM…

@editorjuno

2 күн бұрын

That is correct. The old "American Standard," "American Series," and similar short chromed brass ones won't fit either. That said, both the excellent Gotoh chromed brass bridge plate -- and pretty much any of the flanged "ashtray" types -- will fit perfectly.

Vintage bridge all the way. I use a lefty vintage bridge even though I am right handed. I think a bridge pickup sounds better slanted the other way. Snappier lows and smoother highs. Takes the ice pick high end out.

@ManotickGuitarTech

5 күн бұрын

@@UncleDanBand64 That is interesting- I haven't worked on guitar like that yet.

@UncleDanBand64

5 күн бұрын

@ManotickGuitarTech If you like Teles or Strats give it a try. It seems with Fenders we are always fighting to get the tone we want without being to shrill on the high notes. I build my own guitars. Esquire single Rio Grande in the bridge. So, all I have is a volume and tone. I have been doing that far several years. If I am not mistaken Fender or Squier had a model like that a couple of years back. I am a fan of single pickup guitars Esquires and LP Jr's. 2 pickup guitars are made for someone that can't makeup their mind😀

@joecooper7803

4 күн бұрын

Me too, agreed!!

@UncleDanBand64

4 күн бұрын

@@joecooper7803 there you go

You misspelled Squier on the wall.

@ManotickGuitarTech

4 күн бұрын

Well, the dot over the i is in wrong spot... watch the short where I changed it

modern all day

6 saddles.

The screw placement on those bridge screws (which secure to the body) are unbelievably bad. They stand tall, and when you put the saddle adjustment screws over them to adjust intonation, they change in height as they crest the screw below. Fender knows it's a bad design because the ultra tele doesn't suffer from the design flaw.

I'm gonna pet the cat backwards....modern!!!!! Why not one tuner for every 2 strings?

@ManotickGuitarTech

3 күн бұрын

@@jeffrowlette lol

How do like super slinky’s Steve, and anyone else?

@ManotickGuitarTech

4 күн бұрын

@@ckelly5141 after D'Addarios, they are the strings used the most in my shop...owners preferences

6

You spelled squire wrong

To get your intonation dead on, single is the better way. common mechanical sense. They look cool .I would never use those buddy saddles not good plain and simple.

You spelled Squier wrong.

Vintage but not that one in the picture.

Sqiuer ?

@ManotickGuitarTech

19 сағат бұрын

@@xjmaki new spelling LOL

Telecaster?

I’ve had both on all the Teles I’ve owned over the decades. Whether brass or steel, I think it makes no difference. I much prefer the modern bridge. Advancements are for a reason. People have the illusion that retro is the best. It’s a selling feature by Fender to make $$. It’s about marketing. Nothing more.

Squire not sqiure

@ManotickGuitarTech

4 күн бұрын

@@andrewtait6197 check out my short on the subject LOL

Sqiuer

No interest in anything made in mexico or Chi Nah. Why even bother?