If the world had your commitment, the better off we would all be

A fine piece of workmanship The linear bearings you show about the 10 minute mark i have not seen before

Exquisite work, Keith. All she needs now is a brass nameplate adorning her top.

Nice work Keith, that drill press sure is an impressive piece. Thanks for sharing another great episode.

always impressed with attention to detail and function brilliant ! that is the largest Vernier calliper I have seen !

That dog bone link between the rod eyes on the vertical travel is super important. Some people may bot understand why .

@pete540Z

Жыл бұрын

Double shear is quite important!

All it needs now is your company logo/name sticker. Beautiful workmanship!

Beautiful machine!! Thats how things should be built..so it can be seeviced and repaired..great job.clean af

Great American ingenuity right there. Nicely done Mr. Fenner!

Just an amazing design and build. Ingeniously distilled and so creative. Keith Fenner, truly an American badass🇺🇸

I have made a lot of one off devices for IBM ! It’s real satisfying when you finish a project and it works the way it should !

Thats a lovely machine you've built there Keith. Very satisfying.

nice, simple and effective design anf fabrication.

Indeed Keith, God Bless America!

Love that intro ! Please don’t ever change it.

Thanks for sharing your thoughts, ideas and videos. Nicely done! Knowing your quest for quality an idea I’ve seen others do is use retired flat fire hose as a wear guard over hydraulic hoses on skid steer implements. I’ve also seen it’s possible to buy new hose in many different colors and sizes. Might make an interesting enhancement for the air lines. Wishing you the best.

Your a magician Keith a pleasure and a privilege to watch your handy work.

Mr Keith, you sure a smooth operator, nice piece of work, fabrication is an art form 🤗👴🏻

I seldom know where you're going but I am always impressed when you get there! Good job Mr Fenner.

Fantastic job! That machine should last for ages

You are the last of your KIND, You know that RIGHT. Love YOU

Excellent job awesome design I'm surprised you didn't build it. Multiple spindle .. Now we just need the visioning system and we're already to automate... tulip anyone

Great design and video! Thanks Keith, & keep on making America better!

Nice build, Keith. Thanks for sharing it.

I always have a tap of each size that I grind a flat onto. This works well with a hand drill chuck, allow the drill to float in your hand and tap or clean threads.

Nice work Keith. Thanks for sharing

Keith loved da song . God Bless!!

Nice job Keith.

Great job Keith.

Premium work as always my friend, outstanding! Thanks Keith.

Sweet, nice job Keith. 👏

Like the new opening.... the work was interesting too!

@KeithFenner

Жыл бұрын

Glad you liked it!

Excellent project, all aspects well thought out. Safety considered along the way.

Great design and assembly!

Nice work Keith.

Nice machine..good job. Enjoyed

As always, nice work. -Built something similar many years ago,- I used air over hydraulics to regulate the speed, & take out any springiness in the air. I Also used two motors, arrang4ed so that the machine would drill up from the bottom about an inch, then drill down from the top, so there was no unsightly breakout in the bottom of the timber. The machine was used to build playground equipment. 🤠

as always ....INCREDIBLE !!!!!!!!!!!!!!!!!

Brilliant Keith

Beautiful Keith, thanks for the content and greetings from the NJ Bayshor

Hi Keith and Lisa 😊, nice machine, built whith alot of thought , and attention to detail. You probably already know this , but when trying to measure two shafts, or holes for centre , if you measure from the left hand edge of one shaft to the left hand edge of the other shaft that gives you the exact centre to centre of the two shafts, same idea for two holes. You could use the right hand sides of both points it would work just the same. If you forgot this trick I forgive ya, so long as you forgive the clumsy passer by who broke your marker, ha, ha. Thanks for another interesting, best wishe's to you and Lisa, Stuart UK.

I have used the Dixon markers and they are great. Thanks for the Menards tip, I ordered 6

Real Nice job Keith

Great build…enjoyed

Really nice work.

Nice piece of engineering.

Really nice design! Thanks for sharing 👍

@jimmyboles3409

Жыл бұрын

Hey Kieth I got a request it shows from you to message you on telegram and I don’t have that

You're very "humble" that wasn't luck that was "skill" ....period!

Great video Keith, I like making one off machines,fantastic job!

Fantastic I love it. I would love to see it in action.

Great job!

Keith that is one very neat design sir! Everything is Bubba proof and it would be pretty hard to break this machine. The only really susceptible parts are the airlines to my mind. If I were in the States, and in the fence business, I certainly would want one of your drill presses Sir! Ten out of Ten!

Good job beautiful machine

Yes, Menards is pretty awesome. Got one down the street that I go to at least once a week.

I am confident in your fabrication abilities 😊

@robertquast9684

Жыл бұрын

High praise from someone who isn’t too shabby himself

Thanks for sharing, thanks for posting

very good job mr fenner

nice work!!!

Thanks for sharing

Very impressive build, Kudos. :o)

37:05 A touch of OCD is valuable, in my own experience. It leads to patient attention to the finer details of the job[s] at hand.

Beautifully sung ❤✨🎆🎇🎵🎶

aww ! no drilling demonstration ? good work Keith

Good job ✔️

Over here in the UK we get pens like that made by Tracer and the pen end is double ended so if the tip gets broken or mushroomed out you can pull the chrome nib out and turn it round.

I like it! 🥸👍👀✅❗️

Good job, can you put a video on while it is operational

For smaller holes, foam earplugs work well to keep paint out.

I know that "ring of tools" we call it a "bomb crater" here ....

for the people worrying about the bearings. it's a wear item, as long as the people in the shop are half way paying attention to the product they make and noise in the shop then they will know when it's time to maintenance the tool.

Thumbs up to your patriotism, Keith.

That's a great looking drill press. I wonder if your customers would be interested in a multi-head design capable of drilling a complete post in one go.

@KeithFenner

Жыл бұрын

Maybe one day

Great job. May want wrap or put something around the air hose where they rub against the support corners as I saw them fret just a bit when actuation the air and I could see them fretting and rubbing a hole through the air line. Love the build.

@Hoaxer51

Жыл бұрын

Slit a piece of the correct size of automotive heater hose and wire tie wear it rubs, that makes a quick wear point for air and hydraulic lines.

Awesome :)

The Palisade Press...get yours today

Hey Keith, nice work! Could you machine small grooves on the fence rods at 1" intervals so they could have a rough visual reference for fence setting? Maybe that would be helpful.

Nice Keith, I would have set the vernier and scribed the lines from one end just like a pitch off on the mill lol

@KeithFenner

Жыл бұрын

They are kind of blunt on ends of anvils, That does sound like something I would do! LOL

@theessexhunter1305

Жыл бұрын

@@KeithFenner You are a good trades man Keith.. A bit whacky but good lol ATB from the UK

I think I gave you the Dixon long reach markers in the what’s in your box giveaway!

@KeithFenner

Жыл бұрын

I remember having them in the give a way! My mind ain't what it used to be! LOL I might of still picked up one at the bash. Anyhow, I crushed it 💪 🤣

Menards is the best. In some stores you can buy anything from ammunition to tampons. If I was single and one was close to me they would cover 90% of my shopping needs.

~ I SALUTE YOU FOR THE MORAL * AmericanEagleWON * SOUL YOU ARE !!! ~

You are drilling a wood fence post. If the runout cannot be measured with a ruler that should be close enough those ship augers or self-feed bits have some runout and even variation is size. Plus because of variation within the wood it will cause a bit to move,

Olá amigo Keith!!! Gostei do trabalho de montagem!!! Boa sorte sempre com muita saúde e paz!!!

Impressed you Not use the "guees a meter's" comment.

I sure would like to see it work. How do I see it work?

Very nice work. Do you attach a “Made by Keith Fenner” plate or sticker?

What does it actually do? It looks like it clamps and then drills a hole in one operation?

Great design!! Where do you get those metal adjustable handles?? All I can find are plastic ones.

@KeithFenner

Жыл бұрын

Mc Master Carr

The motor is a bit of a mystery to me. I supposed it had to be bespoke made for thrust loading.

Nice work. How high will the car lift arms go up so that they are out of your way on the floor??

@Hoaxer51

Жыл бұрын

Keith could make a nice variable height table with that if he ever needed to, he may have brought that up when he was moving in. Lots of choices, it would be nice to have.

Too bad we couldn't see the machine in operation.

Лайк.

Hi Keith, how does the USA ohs like the one button clamp setup? Here in Australia, we need two buttons so no hands can get clamped.

@Hoaxer51

Жыл бұрын

Glenn5077, ssshhh! 🤫

nice ......how much is it

This vernier must be a worth of 3.500 US$ , so i presume. Greetings from Germany.

Dixon Long reach @ 6 years each = 36 years You should be all set chief! BTW Keith, do you still have the 944? Any projects on that ?

What industry is this mainly used for?

@KeithFenner

Жыл бұрын

Fence building

I ordered some dixon markers from Menards. It's weird how Amazon became this bastion of phony knock-off things that look like the real deal but aren't. So happy to have Menards as an alternative.

Hi Keith, first off I love your show and watch every one for years. I know you are busy, and don't want to waste your time. I am interested in having you cut out a pies of aluminum 1/2 inch thick. It is a custom carb spacer for my 64 MALIBU SS. I have an STL file that I cant covert into a format that I can send to (SEND CUT SEND) for some reason I cant figure it out. I would like to see if you could help me out, and cut it out on your Plasma or Waser. I know that its a stretch. Have a good one, and keep up the good fight.

@KeithFenner

Жыл бұрын

You need to convert a face view to DFX file to cut with those machines. cheers, Keith

May we ask who the smasher was 😊

@jonanderson5137

Жыл бұрын

Whoever it was is an "idiot" not too stupid though, he bought 6 replacements. 😉

@Hoaxer51

Жыл бұрын

Keith kept saying some idiot, so I’m assuming that Keith had something to do with it. He’s not big on insulting people, other than maybe the big guy! Lol!

Is this for sale?