This is just one of the guideline to make armor from EVA foam, try it, have fun.
Жүктеу.....
Пікірлер: 23
@ilovecreativitymaking82674 жыл бұрын
I think this is the best tutorial
@fatihklc44386 жыл бұрын
ıt is awesome thanks a lot , I learnt a lot from this
@allfather33856 жыл бұрын
Where do you get your eva foam from?
@chastityknite70296 жыл бұрын
I've seen this done by a few other KZreadrs. Method tends to be the same, but yours was the first I've seen that used Aluminum Foil.
@megalodoniacosplay
5 жыл бұрын
Thats what i think too...this with the aluminium foil its useless at all... just take clear foil and then tape its the same at all
@hendrokejar34246 жыл бұрын
Need part two
@nixland7 жыл бұрын
Cool, thanks. What do you use to fill the gap between part if any? I use kwik seal latex but its hard to sand. Thanks
@ministryofsillysuitscospla4181
6 жыл бұрын
Sand down the seams a little to make them even then add thin layers of the kiwk seal
@nixland
6 жыл бұрын
Ministry of Silly Suits Cosplay thanks. Do you use white or clear kwik seal ?
@ministryofsillysuitscospla4181
6 жыл бұрын
Shouldn't matter in the end since you'll be painting over it.
@nixland
6 жыл бұрын
Ministry of Silly Suits Cosplay thanks. I mean which one is better or more recommended.
@raset17865 жыл бұрын
what happen with the part 2 ??
@karlfimm6 жыл бұрын
Good video. Helpful info. Had to mute it as music drove me nuts.
@drjakt7 жыл бұрын
I would loovvvee if you could upload or sell this pattern! Pretty please!
@mediumbelly6 жыл бұрын
is it okay to do this on a real body? or is there a different technique to making molds off real people?
@megalodoniacosplay
5 жыл бұрын
No i make this on my body too but its really hot inside of the clear foil🤣 i make it only with clear foil and tape i dont take aluninium foil after the clear one
@marccasey1230
5 жыл бұрын
You can do it. It's a bit different. You'll use just a t-shirt and duct tape. The shirt is the base, instead of the plastic wrap.
@Kkkaren14126 жыл бұрын
Where do you get that kind of eva foam??
@jessicamurray9592
6 жыл бұрын
Karen Hernandez I buy mind at harbor freight... it's usually black or dark grey. Amazon has it as well if you prefer POCO DIVO 36-SQFT Giant Play Mat 9-tile Excise Mat Easy Setup Solid EVA Foam Mat Multi-color Interlocking Floor with 18-border www.amazon.com/dp/B01IJ4RUKG/ref=cm_sw_r_cp_apa_i_Fy5bBbQZG0JKE
@rikkufinalfantasyx2934 жыл бұрын
I like the detail, is it better to have someone measure your during the breast plate, assembly in the beginning. I am bigger person. I sew my costumes do you sell custom breast plates?
@trans_my_way6 жыл бұрын
Find better music to loop every ten seconds.
@jessicamurray9592
6 жыл бұрын
Eric Ramey or... turn off the sound... Self Reliance ... maybe look into it
Пікірлер: 23
I think this is the best tutorial
ıt is awesome thanks a lot , I learnt a lot from this
Where do you get your eva foam from?
I've seen this done by a few other KZreadrs. Method tends to be the same, but yours was the first I've seen that used Aluminum Foil.
@megalodoniacosplay
5 жыл бұрын
Thats what i think too...this with the aluminium foil its useless at all... just take clear foil and then tape its the same at all
Need part two
Cool, thanks. What do you use to fill the gap between part if any? I use kwik seal latex but its hard to sand. Thanks
@ministryofsillysuitscospla4181
6 жыл бұрын
Sand down the seams a little to make them even then add thin layers of the kiwk seal
@nixland
6 жыл бұрын
Ministry of Silly Suits Cosplay thanks. Do you use white or clear kwik seal ?
@ministryofsillysuitscospla4181
6 жыл бұрын
Shouldn't matter in the end since you'll be painting over it.
@nixland
6 жыл бұрын
Ministry of Silly Suits Cosplay thanks. I mean which one is better or more recommended.
what happen with the part 2 ??
Good video. Helpful info. Had to mute it as music drove me nuts.
I would loovvvee if you could upload or sell this pattern! Pretty please!
is it okay to do this on a real body? or is there a different technique to making molds off real people?
@megalodoniacosplay
5 жыл бұрын
No i make this on my body too but its really hot inside of the clear foil🤣 i make it only with clear foil and tape i dont take aluninium foil after the clear one
@marccasey1230
5 жыл бұрын
You can do it. It's a bit different. You'll use just a t-shirt and duct tape. The shirt is the base, instead of the plastic wrap.
Where do you get that kind of eva foam??
@jessicamurray9592
6 жыл бұрын
Karen Hernandez I buy mind at harbor freight... it's usually black or dark grey. Amazon has it as well if you prefer POCO DIVO 36-SQFT Giant Play Mat 9-tile Excise Mat Easy Setup Solid EVA Foam Mat Multi-color Interlocking Floor with 18-border www.amazon.com/dp/B01IJ4RUKG/ref=cm_sw_r_cp_apa_i_Fy5bBbQZG0JKE
I like the detail, is it better to have someone measure your during the breast plate, assembly in the beginning. I am bigger person. I sew my costumes do you sell custom breast plates?
Find better music to loop every ten seconds.
@jessicamurray9592
6 жыл бұрын
Eric Ramey or... turn off the sound... Self Reliance ... maybe look into it