Another awesomely nerdy video. Great job. My wife still can't understand why I watch these, but they're really nice. Good tests and good explanations. :) I finally got myself an SCX24 this week, and it's nice to see that the Surpass servos I already have several of is a good choice. Bought a four pack of those for like 15 bucks this summer, to have as spares and upgrades for some of my other small crawlers. I have only ran the SCX24 on some obstacles on my bench so far, and yeah, it's fast, but not very strong. It stalls ouy way too soon, compared to most of my other mini trucks with stock, JX or Surpass servos.

We need a part 2 for all the new servos that are out now!

@donaldsneffe

Жыл бұрын

LOL - endless story ;-) (as in the 1/10 servotests I did some years ago).

Absolutely love the reviews ypu do! Very in depth, and clearly spoken. Thanks for uploading. 👍

Super helpful and detailed. High quality content!

Thank you Donald! Amazing display and great information!!

Thank you so much for going into such detail this video was so informative. I appreciate the time and effort you put into your videos.

And I didn't realize it when I went to the store to get my first rig it was the Bronco and I seen that fmsi Mike well I'll go ahead and get it too making that always might be okay also but that wasn't the reason I went there I went there for the scx24 or was I mistaken I put that fms-2 the side and started messing with that scx then I bought the four-wheel steer ax 24 I just now started really messing with the FMS and my goodness is it better I stretched it out and I put some heavy rims on it and it will go anywhere

@donaldsneffe

Жыл бұрын

More options to tune (and spend money ;-) ) in the SCX24... but out of the box the FCX24 is really better. However, also check the new Hobby Plus CR-18P (Rock Van, Trail Hunter), they are (and perform) awesome. Do not waste money on a TRX-4M, if you do not want to spend a ton in upgrades to make it perform.

@keldonator

11 ай бұрын

I making a combination of the two, scx metal transmission and fcx driveline and axles. 4ws furitek stuffs. It's awesome.

Man this is great, I hope next time you can include the ogrc servo

can you tell me a servo that have a 4mm Shaft diameter

Great test as usual!!! For my FCX24, I just replaced the flexible bendy stock steering links with my own 3D printed one, considering replace the servo horn with a metal one, do you reckon any 15T metal horn will fit?

@donaldsneffe

Жыл бұрын

No, I do not think so. The FCX24 servo has a very special, unusal "crown". For the tests I had to heat up a servo-arm (plastic) and press it with a lot of force onto the metal. I could not find any servoarm fitting to the FCX24 servo (and I do have a ton of different micro servos and -arms).

@Mikupigeon

Жыл бұрын

@@donaldsneffe thanks for your confirmation. I will stick with the stock one for the time being then.

@TheAlxzHouz

Жыл бұрын

@@donaldsneffe awesome channel my friend just subd! After the lights issued this is the second problem with my fcx24 can’t find a proper horn for it plastic horn has stripped and now it’s superglued on the pinion no one knows if there is a metal horn for it. I suppose a 25T horn won’t fit. So I was thinking for an alternative servo since there is no horn ,which one do you suggest as a proper upgrade for it? Can I use a DuPont servo with an adapter on the stock fcx or do I have to swap plugs? Or just wait for a metal horn for stock servo ?

@donaldsneffe

Жыл бұрын

@@TheAlxzHouz I have dozens of different micro servo arms (from different servos), none of those fit the FCX24 servo. So I had to heat up a servoarm and press it on for my servo tests. Actually there is no metal servo arm available (AFAIK). Of course you can use a DuPont servoplug servo with adapter.

Vielen Dank für diesen ausführlichen Test der möglichen Ersatzmotoren.Mehr oder weniger sind die Motoren Leistungssgleich gravierende Aussreisser nach oben oder unten konnte ich in der Tabelle nicht wirklich ausmachen ,da stellt sich Mir nur die Frage welcher hat sich als langlebigster herraus gestellt? Denn die Langlebigkeit des Serienmotors ist nicht gerade üppig.

@donaldsneffe

Жыл бұрын

... ich fahr nicht sooo viel und außer Stock SCX24 Motor ist mir noch keiner eingegangen.

Can you please compare the Reefs 99 to the new servo from OGRC?

@donaldsneffe

Жыл бұрын

It is not available here (in EU), would be (with shipping and customs) super, super expensive... I would love to buy and test those servos, and if I would live in the US, I probably would (still expensive). But here in EU I will not order. And I highly doubt, that those servos are better than the cheap metal HV servos I tested in this video (still would like to test).

Hi, awesome video. Do you have a video on how to power the SCX24 servo(the one that can take 8.4 volts) using 2s lipo battery. I know I can buy a external BEC but your video seems like it's going to save me some money by using 2s lipo to power the servo...

@donaldsneffe

Жыл бұрын

No vídeo. You will have to make adapters, red and black from servo directly to battery (y-cable from battery to receiver and servo) and signal (white/orange) plus black from servo to receiver channel 1.

Ich hätte da auch noch ein Servo den ich selbst in beiden SCX24 benutze und sehr zufrieden bin... Und zwar ist das der Injora INSO12G 12g Digital Servo. Haben Sie den auch mal getestet?

@donaldsneffe

Жыл бұрын

kzread.info/dash/bejne/ZKmDyMWvet25mZs.html

So the FCX24 is the winner, i wish you had commented the dimensions on this one, does it fit the SCX24 mount, stock or emax mount ?

@donaldsneffe

Жыл бұрын

It hast standard micro servo size, so no, it will not fit into SCX24 mount (as I mentioned in the video ;-) - there is only one servo in the test that will fit). Same size as Emax... but wires do not come out of the case at the bottom, but on the side of the case... so depending on Emax servo mount, probably you'll have to cut a slit for wires. Would you ever use this servo in an SCX24, if it has 1.25 mm plug and a servo arm with ca. 40 teeth, where you cannot find any spare arm anywhere? I would not use it. You'll have to change plugs (even micro receivers such as the Flysky GMR do have different plugs, JST ZH with 1.5 mm vs. JST GH with 1.25 mm in the FCX24). It is a top servo for RtR, but I would never buy it as an upgrade servo for SCX24.

My fcx24 servo just went out what do y’all suggest without needing any other upgrades

@donaldsneffe

Жыл бұрын

You need a new servo. So you can buy the FCX24 servo as spare part, or buy any servo that fits. Since the FCX24 does come with an adapter from JSG GH plug (board) to "normal" servo plug, you can use most micro servos (that are also used for SCX24) without any mods. However, "normal" servos will have longer wires than the FCX24 servo.

hey is there any chance you know the spline count for the fms servo as i just recently stripped mine and dont want to downgrade servos it would be much appreciated thankyou

@donaldsneffe

Жыл бұрын

You stripped your servoarm? Well, I could take the arm off and count, but if you do have it? I only know that I did not find any servoarm that fit to the FMS FCX24 servo, and I do have tons of different micro servos and countless "Micro/Medi" servoarms. I had to heat up a plastic servo-arm which "nearly fitted" and press it with a lot of force to the FCX24 servo. Honestly I doubt that there are actually (3rd party) servoarms out which fit. But probably there will show up metal servoarms especially for the FCX24 servo soon... Yes, if you cannot for any reason count the teeth, I can do it ;-)

@lincolnditchburn737

Жыл бұрын

@@donaldsneffe no worries just asking as i saw you had a different servo horn thank you though.

@donaldsneffe

Жыл бұрын

@@lincolnditchburn737 Would be interested in an upgrade servo horn, too. Hope this will come... I hate the "crowns" of the micro-servos. Nearly every servo has a different size and spine count, horrible. Much easier in standard servos (for 1/10), where most servos share the same types of servo arms.

@johnswann6508

Жыл бұрын

The Emax crown gear is a direct swap for that in the FMS servo. If you have a couple of burnt Emax, you have parts!

is there a place available where we can get the fcx24 servo?

@donaldsneffe

Жыл бұрын

www.fairrc.com/products/1-24-power-wagon-steering-servo

@kondrez

Жыл бұрын

Thanks

@TheAlxzHouz

Жыл бұрын

Aliexpress RTR hobby store

Welches Metall Servohorn würde denn auf den Emax Servo passen?

@donaldsneffe

Жыл бұрын

Eins für Emax Servo ;-) (gibt es überall, Ali, Injora, Amazon - hat keinen bestimmten Namen)

@hansnsnananna3933

Жыл бұрын

@@donaldsneffe Hab einen bei Tamico gefunden. Danke:)

sorry i dont agree, i use myself over years the tower pro, and they have ~1 KG, they are 1000 times reviewd so its true, same from me. but the S00009M from surpass reach in my lift test ~1,5 KG in real use not 4 or 5 KG like here shown. i think the here shown elektronik device have any type of defekt thats why all servos are far beyond there specs.... i am 100% shure that all my surpass hobby , 5 of them have all 1,5 Kg +-/- 10% differences. and for anyone who relly looking for or good servo for ~ 5€ you get the VOTIK 7455 MG-D, it is much stronger then the surpass hobby for same price but also not reach 4 Kg

I think everything about the fms fcx24 is better

@keldonator

10 ай бұрын

Scx24 has a good transmission. I think that's it's best quality whereas fcx24 has many, even it's transmission is good but for more competitive stuff you would use the scx24 transmission in an fcx24