Transforming a doll into a monster! That was a joy to see :)

@darcyhemeon4309

2 жыл бұрын

Thanks man .. appreciate the compliment

@adamsicotte1151

2 жыл бұрын

Yea that was pretty epic. So satisfying😊

@Singh_1989

2 жыл бұрын

I don't think that is the fastest, if it were it would be red, we all know red makes anything faster... LOL, great job btw

@jasonbourne1596

2 жыл бұрын

@@Singh_1989 It never even got off the table, so fast.

@DylanSchmidt-gu2sx

Жыл бұрын

I see this lunatic commenting on mostly every motorized bicycle video acting like he’s the #1 person. There’s people that DONT waist their lives recording to get attention and have absolutely way more knowledge than people building on KZread.

Great video DLH!!! I can’t wait to put my Minarelli jug on top!!! Really like how clean and straight forward all you videos and work are. Keep ‘em coming!

@darcyhemeon4309

2 жыл бұрын

Thank you Sir ! I'm Glad you enjoyed.

I start with the ZEDA engine. The cylinder has the 6 little dots on the side, this has bigger bypass ports. I match all the openings, intake and exhaust plus the gaskets so there is NO gasket in the way. Intake port is raised 2 thousands and the exhaust is lowered by the same. All edges around the ports are smoothed .The piston skirt on the intake side is trimmed so when at TDC there is no skirt blocking the port. The Big Block reed. Stock ZEDA carb with a #65 main jet. I drill a few large holes in the black plastic breather cover. Tuned pipe and Hi Compression Head. Head is torqued to 15lbs. One of the really important things is to simply warm these engines up completely before going out for a ride and asking the engine to perform. When first started it will run in 4 stroke then as it warms it will run in 2 stroke as it should. Bike is a 26in Aluminum Beach Cruiser, running 2.25 Kevlar tires with street tread @ 50lbs. First of the season wheels are removed so the bearings are greased and bearings checked and set. 44 toothed rear sprocket., thinking about changing it to a 36 tooth. Screaming top end 39-40 mph, backed off to 70% power it will comfortably run @ 30mph. 71.68 mpg. For some reason I just can't leave nothin' Stock, I'm just a Tinker er. LOL

@digitalventuremovement7680

2 жыл бұрын

Same!!! I just got into this stuff…, and absolutely love everything you can do to these. Those billet heads sure do pull a lot of heat out of the engine lol makes staring again after sitting for 30 minutes like a cold start all over again.

@thomasleclair7418

Жыл бұрын

,,,,great work,,,,,,,,,give yourself credit as a gearhead,,,,,,not a tinkerer.....................tinker's don't know about port timing and machine work...........

Where do get your g2 reed valves? I keep getting crappy ones with leaky gaskets and bolts that strip

@dlhperformance7169

2 жыл бұрын

i upgrade them too 6m bolts a i set the reeds , ive never had a issue

We'll done on video 🚴‍♂️💨💨💨 hands down👏👏👏 like how you put the video together and for that 2-stroke build man you got busy ,turns it out looking top-of-the-line💨💨💯👍

@darcyhemeon4309

2 жыл бұрын

Glad you enjoyed watching as much as I did building it

@motorizedbicyclerider5296

2 жыл бұрын

@@darcyhemeon4309 yes sir 🚲💨💨 quick question I looked at your website and I don't have Facebook by any chance do you sale a motor built like that on this video for sale ?💨💨💨💯

@darcyhemeon4309

2 жыл бұрын

@@motorizedbicyclerider5296 Yes I will build them for people, it's easy to get Facebook, look me up

@motorizedbicyclerider5296

2 жыл бұрын

@@darcyhemeon4309 k thanks

@m.kasper7646

2 жыл бұрын

@@motorizedbicyclerider5296 Darcy is a trustworthy guy, if you have anyone build you an engine you can't go wrong with Darcy. 🏁💪👍

Great job man might soon order some parts.

@dlhperformance7169

2 жыл бұрын

thank you Sir

Late to the party, but damn, i wanted to see it run.

@dlhperformance7169

7 ай бұрын

kzread.info/dash/bejne/aauIqraNiNevYZM.htmlsi=HQ0M6sj7T1h1aiZSrd 3rd time ... first place win !!!!

Id love an in depth on the clutch to see how that works

@dlhperformance7169

Жыл бұрын

kzread.info/dash/bejne/eYOdmtGzopOYY8Y.html

This was fun to watch..

I like how the gasket is still prioritized on the clutch cover despite the fact that it has a huge hole with gaps on it. XD

@darcyhemeon4309

2 жыл бұрын

Metal on metal is never a good idea with out some sort of gasket , the cover still bolts on , I suppose a substitute would be to use locktite on bolts so they don't loosen off

@aaronsprojects9022

5 ай бұрын

I've run my stock china doll for years and never had issues with those bolts backing off. My gasket broke in the first month and it hasn't had one since

Good video look fun I want to build a painted minarelli next lol

@darcyhemeon4309

2 жыл бұрын

Definitely fun to build , even more fun to ride !!!

@mozezcen-valley7555

2 жыл бұрын

@@darcyhemeon4309 minarellis are if u go 50 or over 60 there a blast

I have built a couple engines myself and watched a lot of videos and people building up these little engines but I still don't understand the spacer plate between the cylinder and block? Is this to make up quince gap for a upgrade longer stroke connecting rod? Can you please explain?

@dlhperformance7169

Жыл бұрын

The china case was designed for a longer cylinder with a 40mm stroke then the minarelli cylinder with same stroke , the spacer is just making up what is missing

Hi, I hope I'm not asking the same questions so. You took quite a bit out of the flywheels near the B/E. Did you drill them or are they AM ones. And why did you do it and is the rotating assembly balanced? and to what degree. Did you do anything to the barrel were the reed valve setup goes. Very trick and well thought out if I can say. Nice. Did you polish inside the reed block housing itself. You can polish the top of the slug to if you want. Likewise with the combustion chamber as you didn't show it. And what's the capacity. Did you stroke and poke it. It looks a beast. Cheers.

@dlhperformance7169

2 жыл бұрын

Hi Mike i have several videos on cylinder porting , case porting, 70cc complete build up . you will find your answers in these videos thank you Sir kzread.info/dash/bejne/g6WItrynlc6edNI.html

@dlhperformance7169

2 жыл бұрын

kzread.info/dash/bejne/oqBtw7Nyj7bdnrg.html

@dlhperformance7169

2 жыл бұрын

kzread.info/dash/bejne/ZauIl6OEedXUp8Y.html

hello I would like to mount your cylinder but I do not know how often I have to make the plate from the aluminum and then if the connecting rod is okay at af 80? Could you help me?

@dlhperformance7169

Жыл бұрын

dlh-performance.myshopify.com , go to my site and email me thank you

Where do you buy that thin you put on the clutch. Not the cover but the thing with the blue color

@darcyhemeon4309

2 жыл бұрын

I sell the SAF Super Clutch, if your interested, you can find my contact info in descriptions of this video Thank you

Good lookn setup, gg🚴💨💨💨👽z

@Op1zilla

Жыл бұрын

Watch this chinadoll u built win the ultimate Race, lol great job D.H. ggz-👽👍

could you make a detailed video of how to balance and true the crank

@dlhperformance7169

Жыл бұрын

kzread.info/dash/bejne/gKNk0c2LYM-_gpc.html

Name of second song?

Love this channel for how informative it is and the great things it does for our community!

@darcyhemeon4309

2 жыл бұрын

Thank you Sir

👏👏👏🔥🔥🔥

Are you guys gonna have any in stock

@dlhperformance7169

Жыл бұрын

email my website and request one

Can I get a link for this complete kit

@dlhperformance7169

8 ай бұрын

dlh-performance.myshopify.com/collections/engines

What Was the point of The holes in the Crank? ( momentum?)

@dlhperformance7169

2 жыл бұрын

balanced and trued crank

You should look up minareli horizontal full stage6 rt drag racing 😉

@dlhperformance7169

7 ай бұрын

yes i have , very fast engines in that specific class . this is a 2hp engine originally stock that's is now 12hp that fits on a bicycle with only one drive gear. a totally different class of engine we are talking

Hey what size hole saw is that btw?

@darcyhemeon4309

2 жыл бұрын

Sorry for late response its 3 inches 5/8 hole saw

How fast can one of these go and how many miles gallon is this thing pull

@dlhperformance7169

2 жыл бұрын

55 -60mph depending on carb, pipe, gearing

I did the same steps and nothing happened!!

Where can I order the cylinder from with the components?

@dlhperformance7169

Жыл бұрын

dlh-performance.myshopify.com/

Has anyone tried a standard minarelli vertical intake and a 19mm PHBG?

@dlhperformance7169

7 ай бұрын

sure they have , a standard reed for the minarelli is a stock 2 peddle reed this is a 6 peddle performance reed setup exclusively sold by DLH Performance

@jb314stl

7 ай бұрын

Do the bicycle engines run better with more of a restriction at the intake compared to the scooter engines?

@dlhperformance7169

4 ай бұрын

@@jb314stl I've won 1st place 3 consecutive times with this design their is no restriction at all , actually the stock setup is not for racing or performance a single flat reed doesn't compare

@jb314stl

4 ай бұрын

@@dlhperformance7169My original comment was aimed at the community. I wasn't taking a shot at you or your design. I was refering to an intake like the MXS Racing for minarelli vertical or one off a MBK Booster.

Please build me one next build me one next I'm happy now

Where are u located can I grab a bike or built engine im currently in dc n will be driving back to ma Friday

@darcyhemeon4309

2 жыл бұрын

My website is in description Thank you for watching

What about oils for the motor 🤔 what oil you can use for motor ???? and how much oil to put in the motor 🤔

@osmoz1179

2 жыл бұрын

It's a 2 stroke

@dlhperformance7169

2 жыл бұрын

mixed fuel 40:1 ratio 2 stroke

What was total cost?? Max rpm?? Only numbers that matter for speed

@dlhperformance7169

7 ай бұрын

i sell the engines for 850.00 , 12k rpm 70cc 39mm stroke, 47mm piston, this engine has won 3 executive 1st place wins .

@dlhperformance7169

7 ай бұрын

but the point of this video is..... how fast in the vid the engine was assembled , not how fast the engine is ! even though its won 3, 1st place wins in a row. thanks for watching

How many cc’s how fast is it compared to phantom 85?? Cheers

@dlhperformance7169

2 жыл бұрын

70cc minarelli it would easily out race a phantom on a track dew to acceleration

@anthonydickenson6605

2 жыл бұрын

Lol. That's bull shit. I have a phantom 85, it does 60mph+ and it's not even fully broken in. The problem with the phantom is the piston cylinder set up. Burns out quit if you ride too hard , too long

@theoldmanreed8818

2 жыл бұрын

@@anthonydickenson6605 Are you sure?

@anthonydickenson6605

2 жыл бұрын

@@theoldmanreed8818 oh yeah. I was on some back roads keeping with cars doing 75mph. Shit is crazy fast

That look like yamaha jog cylinder

@dlhperformance7169

Жыл бұрын

It is

Nice

@dlhperformance7169

2 жыл бұрын

Thanks

Where can I buy this motor

@darcyhemeon4309

2 жыл бұрын

Look in descriptions and you can contact me

That’s a BOLD statement

@darcyhemeon4309

2 жыл бұрын

It is a fast built engine .. only took me 7min and no tools

@tyronep5611

2 жыл бұрын

@@darcyhemeon4309 in that case, brilliant!

Do you sell everything to build this engine?

@darcyhemeon4309

2 жыл бұрын

Click on this video title it take you into descriptions , a link to my website is on thier Thank you Sir

Nope, you're incorrect. Ohh, wait, this is an year old video. Maybe back then...

@darcyhemeon4309

9 ай бұрын

Same engine bought off my website kzread.info/dash/bejne/aauIqraNiNevYZM.htmlsi=1DoATEkWrd9cHi5g

@dlhperformance7169

7 ай бұрын

this engine has won 1st place 3 events in a row

I'm too poor for a Minarelli, so I slapped on an MS660 and called it a day. #tooghetto

Hey Darcey not being a smart as but asking sincerely cause Maybe I don't know y but why do you still put a gasket on the clutch cover? You know cause it's not sealing the cover anymore. Jw thanks

@darcyhemeon4309

2 жыл бұрын

All it does is give the clutch disk more space in the cover .. now if I cut a bigger hole . Your would not need the gasket . Also I feel it helps with metal on metal vibration causing bolts to loosen . Goog question tho , I guess it's up to personal preference

@JMB676

2 жыл бұрын

@@darcyhemeon4309 ok no doubt jw I was thinkin about metal on metal but personally didn’t think it mattered for that but it definitely could. Either way thanks for sharing. Hey I know u do a lot with the minerallis but the vertical is the one everyone uses from what I can tell but the other ones I see on eBay don’t have the built in Reed block but if enough work was put into them I could just add a Reed block into it and have it go in at bottom kinda like the vertical. I’m assuming they are case reeds

@darcyhemeon4309

2 жыл бұрын

@@JMB676 yes I have a few jog cylinders that your referring too they are case Reeds , I have a stage6 coming as we speak

@JMB676

2 жыл бұрын

@@darcyhemeon4309 ok I was lookin at them last night on eBay n seen. They don’t have an intake port and it started me thinkin about makin one into a dio Reed basically so I figured I would ask you since your the only one that seems to post any useful information o these motors

@KenC56mm

2 жыл бұрын

Your definitely a pro! Decent music too. Hey can I fit a horizontal minarelli on a big block case like the YD100 bottom? Beautiful colors on the beast btw!

Happy to Is subscribe

i have one of these clutchs and the set screw stripped out

@darcyhemeon4309

2 жыл бұрын

Pm me then

@darcyhemeon4309

2 жыл бұрын

Contact is in descriptions

Gonna see about making a real 100cc with a ms460 big bore top end

@dlhperformance7169

Жыл бұрын

should be a good runner

@jamess7681

Жыл бұрын

@@dlhperformance7169 yeah I'm not sure if I wanna go case reed tho

@jamess7681

Жыл бұрын

It'll be expensive bit worth it hopefully

How can I get one of those clutches

@darcyhemeon4309

2 жыл бұрын

Look me up on Facebook

@darcyhemeon4309

2 жыл бұрын

My contact is in description on this video Thank you Sir

No need for a clutch cover gasket if you're already going to have a giant hole in the side

@dlhperformance7169

Жыл бұрын

i do it for vibration

bro im talking to a guy thats doing a theoretical 198cc with like a 60 sum mm piston

@Jaybird913

Жыл бұрын

he is building it now

@dlhperformance7169

11 ай бұрын

Your missing the point of this video , it is a very fast engine and won first place at SoCal but ......, The video is actually about how fast the engine is assembled or built

Price

@dlhperformance7169

Жыл бұрын

Go to my website you will find link in descriptions of this video

showing all the tricks without showing how to do anything

@dlhperformance7169

2 ай бұрын

if you watch my other video's i show everything you need too know and more. thanks for subscribing

I recommend buying a Malossi cylinder, then you can feel the right power

@dlhperformance7169

Жыл бұрын

i've tried all kinds of cylinders , i designed this spacer type and now everyone builds these china even copied it

@pvk6665

Жыл бұрын

On Malossi, the portings are done much better and there is a good vortex in the cylinder, it ensures good lubrication and the cylinder compression does not become low. Nothing needs to be done and the cylinder develops 7-8hp@@dlhperformance7169

I mean liquid cooling would be a hell of alot faster

That engine is sexy

What is needed to make these bad boys go over 60 mph I would like to know the information and what to do and what to order thank you sir

@darcyhemeon4309

2 жыл бұрын

My contact information is in the descriptions of this video Thank you Sir

I LEARNED NOTHING

@dlhperformance7169

Жыл бұрын

Thank you for subscribing .

I'd say fastest paint/dry too

@dlhperformance7169

9 ай бұрын

the engine won 3 events 1# first place at SoCal raceway

HP ??????

@darcyhemeon4309

2 жыл бұрын

10 - 12 hp

@iride5725

2 жыл бұрын

It would be real easy for him to back up his clams of 10- 12 hp just get on the internet and look for local dynos... in my area Nashville TN there all over the place 75$ dollars for 3 pulls.

@darcyhemeon4309

2 жыл бұрын

@@iride5725 I didn't make this video too prove anything to anyone .. these engines are fast , the video consists of a fast built engine , a very very nice one at that , too many people in this hobby high on thier horse , I'm this I'm that prove it. prove it , I'm better then you , come too me ill race you , no video no no no no .. lol it sad really Just enjoy the video man

It would never touch a piaggio....think about that

@darcyhemeon4309

2 жыл бұрын

You missed the point of the video I believe , this video is not about the fastest engine Thank you

@dlhperformance7169

Жыл бұрын

kinda funny comment but it did beat a piaggio at Socal F2

@darcyhemeon4309

Жыл бұрын

Drago Smith kzread.info/dash/bejne/c4t6t7yke9q6nM4.html

Would have beem a great video without all the finger snapping...

Sorry dude you forgot to say "by me" but yeah you're talented and there are 3 better guys, dude you're 4th best parts maker and 3rd best performance to price ratio congrats and sorry if it sounded like hate, but still it's amazing engine:)

The parts are extremely cheap 174 the cylinder to

@darcyhemeon4309

Жыл бұрын

This one's not 174 .... I can tell you that

@dlhperformance7169

Жыл бұрын

this video shows this cheap parts engine you call running a race getting first place , imagine that , please watch kzread.info/dash/bejne/c4t6t7yke9q6nM4.html

Somebody has not seen two stroke stuffing

@darcyhemeon4309

2 жыл бұрын

Read the title ., again watch how fast the engines built .. maybe you will get it .. Thanks for watching..

@ROBERTHOxDRAGNEA

2 жыл бұрын

@@darcyhemeon4309 price for this engine?

@iride5725

2 жыл бұрын

Two much!

@mikerammelt2420

2 жыл бұрын

I was wondering when someone was going to mention him. It's still not going the way he wants last time I watched. He's thinks it's the crankcase volume. ? Imagine we he gets it going on pop.

Not the fastest by a long shot....seriously and that intake isn't that great a two peddle reed is the right way to go

@darcyhemeon4309

2 жыл бұрын

I think you missed the point of this video, it's not at all about how fast this engine is Thank you

@dlhperformance7169

2 жыл бұрын

a 2 peddle reed is a stock reed for a minarelli , a performance reed similar to a g2 reed

@darcyhemeon4309

Жыл бұрын

Drago Smith Have a good watch kzread.info/dash/bejne/c4t6t7yke9q6nM4.html

How are we meant to see it’s the worlds most powerful ever built if he doesn’t even show us it running

@dlhperformance7169

Жыл бұрын

please watch all this video , has your answer kzread.info/dash/bejne/c4t6t7yke9q6nM4.html

There are a bunch of different much faster cylinders for these motors. How do you find it okay to put that dinged up crank in there? A g2 reed just increases crank volume and minarelli cylinders are already adapted for flat reed set ups. God Darcy, I knew you were a joke but this is unbelievable.

@darcyhemeon4309

2 жыл бұрын

Might I add ... its a Beautifully built Engine , sorry your Jelouse Thanks again for watching

@darcyhemeon4309

2 жыл бұрын

Also people running Dio setups on these are they all a joke too !! Please answer this question because I believe Mark is one of them So let's hear your thoughts

@dlhperformance7169

2 жыл бұрын

blaze Campbell , i can see the concept of this video has totally gone over your head which tells me a lot about your IQ , all you can see is the word Fast Engine in Fact has nothing to do with this video . thanks for watching ! your comments are a joke as you are

@garbizzi6868

2 жыл бұрын

Looks like u got some haters in the comment section buddy! I think these engines are damn nice. I was gonna buy a smolik engine but it seems u have a better clutch setup

@dlhperformance7169

2 жыл бұрын

@@garbizzi6868 oh yes thats the sad part of this hobby all Ryan and Ethan smolick or thier following if your not with the click your stuff is garbage Blaze Campbell is one of thier groupies

I see no evidence of Fastest Motorized Bike Engine Ever Built from this video, Never even ran. Also never want your clutch casing open to outside elements, Very dumb, Pretty but Dumb.

@dlhperformance7169

2 жыл бұрын

I'm sorry you feel that way but obviously you did not understand this video, it is not about how fast the engine is but how fast the engine was built and built in 7 min. however Sir, this engine is a 60+ mph build and in my opinion very good looking minarelli , the SAF Super Clutch is one of the strongest on the market as for the open clutch cover everyone not just me plus other vendor run open cases with absolutely no issues , thanks for watching !!!!

@stephenfhauk

2 жыл бұрын

@@dlhperformance7169 Just giving my advise as a 25 year Fabricator and Mechanic of small engines. Open casing's let in foreign elements to the gear and damage it over time, Just a fact. The video was fine though and the motor build was great.

@mikerammelt2420

2 жыл бұрын

@@stephenfhauk even a Plexy glass cover would look great. When he took the cases off, I thought he was replacing them with clear ones.

@darcyhemeon4309

Жыл бұрын

Have a good watch kzread.info/dash/bejne/c4t6t7yke9q6nM4.html

Please get me on Instagram so we can talk . I like how you work 🤝

Nice

@dlhperformance7169

2 ай бұрын

Thanks