I got in trouble for keeping my boat in the fridge

@sethbigboy324

3 жыл бұрын

n00b

@gojira6759

3 жыл бұрын

I did a thing rip lol

@Aidanbessellfs4

3 жыл бұрын

I’m a big fan of your channel

@404vods5

3 жыл бұрын

Does any body know who that man is?!?!?

@wsedwsedwsed5384

3 жыл бұрын

Imagine getting caught

Idea: aircraft carrier and land A RC plane on it

@YukariAkiyama

4 жыл бұрын

Yos

@deltavgaming3447

3 жыл бұрын

for your enjoyment kzread.info

@theamericanemu674

3 жыл бұрын

Yes

@Alex-gg8rt

3 жыл бұрын

@@deltavgaming3447 I was just about to suggest that

That RC boat turned into an airboat real quick. 😂

@MrDownRater

5 жыл бұрын

Nice boat, but I like yours so much more! ;)

@tannerfamily80

4 жыл бұрын

Hello

@nilsYOLO96

4 жыл бұрын

im building the jetboat that you make tho

3D printed submarine with gopro underwater camera inside ;)

@xureality

5 жыл бұрын

The problem is getting radio to work underwater (hint: you can't) so it would have to either be tethered or just have a long pole/periscope tower for the antennas.

@cloudserph

5 жыл бұрын

FPV sub with floating receiver/cloverleaf trailing pod?

@Erichder5te

5 жыл бұрын

@@xureality you can! You have to use another Radio, use an old one with 35Mhz or 40Mhz!

@xureality

5 жыл бұрын

@@Erichder5te only to a few inches, which is basically nothing in terms of diving depths, though i suspect that you could get better signal in fresh water since the limiting factor of seawater is conductivity and not absorption so your mileage (or should i say max depth?) may vary. Doesn't help that i had been thinking in terms of actual submarines (where khz range signals are used, and even then only to a few meters, ELF signals excluded) which for many reasons doesn't operate in freshwater.

@Erichder5te

5 жыл бұрын

​@@xureality You´re right so either just dive some inches or we want to see a 3d printed AUV :) That can autonomously follows a diving Person with Propellers in his Fists :o

Sweet. Love the quad motors with cut down props. That makes a custom boat really simple to accomplish.

@aserta

5 жыл бұрын

Go buy two surfer RC "boats", gut them, and make a single shell out of a few pieces of balsa, total will come just under 60USD, fast boat, cheap, fun to make.

@localfiend

5 жыл бұрын

@@aserta With the quad motor trick, I don't need to buy anything. Got a 3d printer, so designing and printing a boat would be trivial.

@aarong.4691

5 жыл бұрын

@@localfiend hey localfeind I'm from the forums (I'm beta testing the 27inch pike). I guess we both like Peter's videos!

@wojciechsosna9230

2 жыл бұрын

man, its one of least efficient ways to make water prop. its better to buy some of them, or even 3d print them for free

Next up a 3D printed submarine???

@rst6590

5 жыл бұрын

No an part 2 with solar drive

@miketech2

5 жыл бұрын

rst, solar doesn’t produce nearly enough to run something like this.

@rst6590

5 жыл бұрын

@@miketech2 look at rctstflights "solar plane"

@timk9727

5 жыл бұрын

Yes. With some sort of fpv cameras

@cooter3690

5 жыл бұрын

That beach has a big rock that people jump off of. Few people know that there’s actually an underwater tunnel through the rock. I’d love to see him make a submarine to go through it.

Nothing like eating a nice ham sandwich at 12 in the afternoon and then seeing Peter upload. Love your videos man, keep up the good work!

@ABID5

5 жыл бұрын

nothing like watching before exam

@vjhansen7280

5 жыл бұрын

Nothing like watching at 3:30 am

@xmanruiz

5 жыл бұрын

Same

@xmanruiz

5 жыл бұрын

hansHansen it nevermind

@daggius

5 жыл бұрын

12 is the noon not the afternoon

Peter doesn't keep heads in his fridge like most people, he keeps boats.

@wesman4real1

4 жыл бұрын

@@parttimecripple poot u ded

@areyousureyouenteredyourna85

3 жыл бұрын

I keep severed heads all around the house. The freezer is for hacked up legs and torsos. That's the tasty part.

@theformer1337agent

2 жыл бұрын

@@areyousureyouenteredyourna85 your sentence is perfectly normal totally nothing wrong with it

I have always loved the editing on this channel. For me this puts your content above the rest.

Hydrofoil design next time!

@Leon-gt8gm

5 жыл бұрын

That would be great

@martindinner3621

5 жыл бұрын

Pegasus-class PHM!

@modelnutty6503

5 жыл бұрын

full size jet ski style he can drive, 2.5 to 3 kw could ZOOM.

@sawyerheslep8493

5 жыл бұрын

That's what I thought.

I really like your editing style. It shows the process without wasting time. "Oh look, that other guy is cutting that piece of metal for another 20 seconds, so interesting."

I've been saving for a 3D printer for a while. I've taken many classes in blue print and art, and have always drawn neat contraptions, but always been poor (family life) or unable to build anything. Soon enough all the toys dreamed up as a kid will be made for my kids to play with and tell me they suck - I know back in the 80's they would've been great and that is what counts!

That was super fun to make!

@willasproth

5 жыл бұрын

Sam Foskuhl cool cool

Man Stephans been there for 3 years? Long stay!

@yes7420

3 жыл бұрын

Bronco

4:50 I like that you just throw a random chair in the water 🤣

The cavitation bubbles from the propellers look amazing

You should try and make a brick fly. Like a simple red brick

@skinnyflea2628

5 жыл бұрын

vj hansen I feel that would better suit flight test

@HobkinBoi

5 жыл бұрын

Flite Test already made a cinder block fly I believe.

@xureality

5 жыл бұрын

Bonus points if he uses a red brick esc?

@vjhansen7280

5 жыл бұрын

Of course

@wesman4real1

4 жыл бұрын

bricks are too heavy they cant fly

Now, THIS is what I’m TALKIN’ a’boat!! Fun stuff!!

@wesman4real1

4 жыл бұрын

ha ha verry punny

The shirt is awesome!!

Good job guys! I've almost finished 3d printing your boat design with some modification (67% scale, smaller motors) and I can't wait to make it run! Your video quality is always so good! Congratulation!

That was the best advertisement I've watched in my life. The "do you go to questionable websites" made me laugh out loud on the metro 😂😂 good work man.

Who all come just to see the dope montages Peter and whoever else behind them put together... Montage KING! Big props on pun intended to all that help into making your videos. Mad Respect Bro keep it up!

Been out of rc boats for a while, but I had lots of different ones from twin hull race boats to sail boats. It was cool to see how you guys made these from scratch.

Imagine how fast it could really go with the right type of props. Some actual surface props. That would be cool to see the difference in speed

That red one quite a fast boat. Even faster if runs 4s. And good looking too.

Make this a kit for people too make. I'd buy one! I'm sure others would enjoy making and playing with this toy.

Holy cavitation. Those propellers are going to be your biggest area of improvement.

Peter taking out the boat from the fridge. 'Thats cool' i see what you did there ;)

thank you to your brother for his service. i really appreciate it.

1:18 that soldering tip is so grody. And yet my connections don't look any better. I call H4X.

@danielstark8258

5 жыл бұрын

It’s not the tip that matters it’s how you use it

@skinnyflea2628

5 жыл бұрын

HatfieldCW lol I understand 😂

@aaccount7616

5 жыл бұрын

@@danielstark8258 thats what she said

@IoriTatsuguchi

5 жыл бұрын

Alexander Manno The first time since forever that I laughed on that joke. Nice catch lol

We can easily find such rc boats in market.... But the effort u put into to making ur own products is definitely above all...it have definitely inspired me to get in to RC world and built things like u do...

Nice video as always, keep it up!

Wow the boat is very fast

You should make a 3D printed hydrofoil boat!!!

I love the underwater spirals from the fans

10:05 Pew News with Gloria Borger

I love the vapor wave going on here

I saw you and Sam at Maker Faire. It was great to meet you guys.

That was fun Peter!!!

Awesome!! A hydrofoil would be awesome to see next!

Hi Peter, With injection moulding you need to machine a steel die which is predictably extremely expensive. It's only really economical if you intend to produce tens or hundreds of thousands of units. It costs tens of thousands of dollars per die. You might want to look at vacuform (vacuum form) moulding which I believe is how most rc shells are created. You might be able to find a strong, flexible resin in which case a rtv silicone mould could also be an option, but for creating rc boat hulls I think the vacumform is your best bet, unless you have the money to burn for a steel die. Obviously researching what other people have done in the hobby would be prudent. Especially as this a little outside my area of expertise.

I love your montages❤️❤️

So when are you guys making a full scale boat?

5:40 now thats an epic t-shirt!

I have tried to do a boat myself but it wasn't that successful! I really liked how the boat was jumping on a water at 2:00 its mad! I have to say I am glad that you find your sponsor! Nordvpn is a strong and respectful product indeed! I use it myself!

Man I've never been this early for a Peter sripol video.

The answer for long print time is making it smaller, as the square-cube law means at half size, it actually has 4 times less surface area and 8 times less volume/mass (obviously not linear as 3D printing uses shells and infill, but it's close). You could try testing what sized motor/prop combo would be the best for a 75% or 50% scaled boat, for example.

I am gonna try to put one of these boats together but with a proper shaft, prop and rudder. I am gonna try to use a traxxas 12t Titan motor and ESC with 7.2v 3000mAh NiMH packs to power it. I upgraded a truck to brushless and have a whole electronics and hardware system for a boat extra. I was gonna try to make a boat from scratch using foam board or thin plywood but this looks like the way to go. Thanks for posting the .stl files!!!

You guys should build a boat that can retrieve any other rc boat! This way, when you go to a lake and your boat gets stuck you can go get it. Plus, I'd like to see what crazy mechanisms you can come up with to grab and hold onto boats!

I am so glad I have discovered this channel it is so awesome and entertaining and good luck to your brother

Peter please make more videos weekly 🥇

Awesome project, I might give it a go. Was also super cool to meet you at World Maker Faire!

Great meeting you at the makerfaire last weekend.

it's cool to see your favorite youtuber at your favorite beach Waimea Bay 3:58 play the interstellar docking music

I laughed so hard at 6:12.. idek why 😂

Once again, you build something in 2 days that would take other people (me included) 2 weeks! PS: could you tell me the material your 3D printer uses? I was thinking of trying to build my own little boat. :)

A racing hydroplane boat would be cool with this power setup

more videos with *your* plane I love it!

Sick montoge at the end

Personally running rc powerboats i think the idea is awesome much easier than running props and driveshafts haha especially to have fun would love to see more boat content and maybe try some actual boat props ;) id be very interested to see the results

That was so cool I might have to print one out

i thought your video was great but then i saw the VPN ad. and I liked it even more. thumbs up Peter :)

Home made injection moulding of that boat would be awesome to see!!!! Go for it! People throw away loads of HDPE everyday so it could be a good environment project!!

what are you using to coat the boat before you paint to fill in the gaps the print left?

Man, people have talent

I'm looking at printing this with an Ender 3, what scale should it be printed at? If I go with the 100 percent it's gna take days to print, is this correct? Cheers

Excellent video, when are you updating the boat hull files and uploading the build video?

Nice rooster tails

*Amazing* 😍😍

I am amazed with your intelligence! Honestly I think you can do what ever u set your mind to. I like the way you think. If ever you what free help I would jump at. the chance to help,I want the type of thought you use and problem solving skills. One thing I know that Brain of yours can help the world solving problems ore JUST MAKE YOUR OWN LINE OF BAD ASS RC EVERYTHING!! KEEP UP THE WORK ON THR COOLEST STUFF ON THIS TUBE! RECREAT THR RC WORLD! YOUR THE PERSON TO DO IT.

You must be at Waimea Bay. I recognize the church in the background. That was my favorite beach when I was stationed there.

Hooray for Sam

Awesome build! I'd definitely pick one up if you sold them on the site. Would be a fun project.

Love the concept, been working on rc boats for a while. No luck with electric ($$) so have started making a weed-whacker one instead. I would love to see you guys produce these, would definitely buy. However, I still concerned about running these in salt water and without a traditional stuffing tube.

so you didnt seal the brushless rc motors at all? does this work for the hobbypower a2212 out of curiosity? thanks

You should try to make an RC submarine

Wooow amazing video!!😍😍thank you!!

3D printed hydrofoil RC flying boat plane .... now that would be DOPE to see if you can pull it off !

High speed boat chase 😎

You could vacuum form the top and bottom halfs, that should be pretty cheap to produce both in big and small quantities

@br0k3nilluzion

5 жыл бұрын

thats a good idea.. anyone could 3d print theirs and then vacuum form it to have cheap copies

@modelnutty6503

5 жыл бұрын

there ya go, Peter, scratch build a 12x24 vaccuform table. steal heating coils from a bunch of hair dryers or cheap electric heaters, shopvac to pull. go smaller (about 7x12) for using 2 liter bottle plastic could be good for instant tiny whoov frames, micro boats, 1/16 or smaller car bodies etc.

Try putting long shafts on the motors. Getting the propeller longer back/down will make more water hit the propeller once the boat "flies" across the water.

Sweet. Did you try the outboard outrunner motors with the regular brass screws? How about building an electric jet boat next? Thank you for sharing.

Dude love your video's, next you should design and 3d print a hydrofoil speedboat!!

What esc did you use for the twin motor setup peter?

What size battery did he use or what battery would you use to power it??

those motors are impressive tbh

I don't mind the VPN ad. You have bills to pay. This is free content for me. Thanks.

New video man keep it up👍🏼👌🏼

Both boats will run hilariously with waterjet drive. Waiting for the jet boat of your design

Hit that YEET

Awesome project

Designing a boat like a boattail bullet. Maybe even more boatty-tailed. Go crazy. Do eeet.

Peter should do a Model rocket or something along those lines

I tried doing something similar with an old Traxxas velineon system from a rustler vxl, and it consistently ripped every piece into shreds.

@christopher1666

5 жыл бұрын

Wait a sec, the Beef Stew? The original one? The one dunkey mentioned several times?

Nice boat. I have printed it and had its maiden today. Had a job turning it whilst going slow. Being new to boats, can you tell me what the aluminium part is for screwed to the back.

What glue are you using to put the parts together? I’m new to 3D printing and would like to print and build bigger stuff.

Dude, I would love to get one of those boats. I’ve been wanting an rc boat for a while but haven’t jumped on it yet cause most of them flip easy.

It's ain't Peter without a montage

Hi Peter and Sam, do you have a tutorial on how to post process the hull? I printed and build one, but it seems to do the same your boat was doing Peter. It dips the nose down on higher throttle. Also it will turn itself at higher throttle. Tried different props but I'm going to try some more. I didn't have any two bladed ones anymore. It might be the hull has to much drag maybe? Any help is appreciated :)

Hi peter cant find files on thingyverse as I am into rc boats i would like to print this out and try that motor configuration thanks