That was a perfect review. Exactly what I was looking for. Thank you.

Great vid Chris, bit disappointed in the lower loadcell as I WAS waiting for these to arrive before getting the CSL DD. Then a friend got the T-LCM and started raving about loadcells so I got a set of V3's going reasonably cheap on Ebay, was NOT disappointed one bit... Same friend just got his CSL DD and is singing it's praises (Both of us have T300's). Glad you got the scoop (form my subbed channels at least) for the pedal as well as the wheelbase, cause I voted for you in the Fanatec Poll :)

Great review and good to see a Chris Haye vid, hope you’re doing well

It takes multiple hours / weeks to get used to. I first switched from G29 to CSL DD, which helped me to get a bit faster or at least more accurate 😂 after LC Kit was available, I ordered it and have been using it for couple of weeks and again I've gained some time, but I still need some practice to master it properly. Don't care about the travel at all, as I know that it's all about preasure. I'm also using racing boots with these as I feel it's more comfortable than with socks 😎

Really good video I’m waiting on mine to come this week to replace my g920 pedals

Great video ! Thank you . Showing the wiring hookup would have been helpful but it’s all good . Thanks

I'd strongly recommend having a rig with a firm seat and pedal mount. Even my sturdy seat stand with wheel/chair cradle isn't sturdy enough. Thanks for the video.

Just got mine this week and my LC brake pedal travel is nowhere near like the ones shown here. I can barely push it past 2cm and it makes it very hard for me to heel-toe. Definitely gonna change some out to get more pedal travel.

@marcelvierthaler8987

2 жыл бұрын

I have the same problem. It is so hard and you can do a maximum push from 1-2cm Do you change it or do you get a new one?

@greggschaftler1394

2 жыл бұрын

are u using it on a rig? it seems that without being mounted to something completely solid, these pedals are really hard to push in with the stock 65 shore elastomers (im having the same issue, im using a desk and the pedals are just on the floor.)

@coastalboat5700

2 жыл бұрын

I’d recommend using the foam insert from the standard CSL brake pedal and replace one disc of the rubber with the foam. Travel is better and less stiff.

@pieflies

2 жыл бұрын

Mine is like that also. I’m not very happy with the feel.

@Daz555Daz

2 жыл бұрын

Chris clearly does not skip leg day.

Great summary, and I'm right in the target market too. As someone who's used more advanced pedals, do you think they would benefit from a future performance kit with harder disk replacements? Or with the (relative to hardcore) light maximum load would it not quite work right? Just got to mash F5 on Friday now! That will be my last bit of gear this year, then it's time to save for a csl DD to replace the ancient Logitech DFGT.

@wakosfliptable

2 жыл бұрын

tbh it's already way too hard as it is, it's harder than the clubsport v3

Why is the travel in your load cell 2-3x longer than in mine? Was it like that from the start or did it wear in?

@Russxm

10 ай бұрын

That's wtf I'm saying..... genuinely bummed rn. It's unfuckingusable. No travel at all. How'd yours go after 1 year?

@just_perk

4 ай бұрын

I thought I was the only one, who has this problem. I just bought it and this thing doesn’t move

"Braking-zone kung-fu" *Kazuya Mishimas a Logitech pedal set* Love the humor you're injecting into your recent videos.

@ChrisHaye

2 жыл бұрын

Thanks man. I'm just trying to keep it interesting. There's only so much you can say about sim racing hardware before you could get to a stage that AI could replicate it :D

@bluesrike

2 жыл бұрын

@@ChrisHaye No worries, I get it. Now I'm just holding out for a PlayStation-compatible CSL DD. There's already leaks of it even though the picture on the box looks like a CSL DD with a Thrustmaster T-GT steering wheel photoshopped onto it.

@SRS13Rastus

2 жыл бұрын

@@ChrisHaye SHOCK HORROR! Wot no Robo-Chris hidden in a box in back of the studio??? It's true though the humour and tongue in cheek wiv a wee grin keeps me coming back :D

Looks like a candidate for an upgrade kit of elastomers! :)

I’m not fussed about the loss of resolution of the LC as I’ll be using GT7 any way but I’d need much stronger poly bungs. My current pedal CSL LC is solid and is set to to almost full. I also boxed the throttle and used the clutch as a throttle as the spring is firmer. It looks like the new CSL pedals cannot do this so I’d need to fabricate a firmer throttle using RC suspension struts.

Just be careful if you're a large guy like me. I split one of the 65s quite easily on my CSL Elite LC pedal. Luckily they came with 85 and 95 options to switch up to, and I could use one of the 65s as a replacement for the foam. I think a lack if options on this new set, might cause problems for heavy brakers like me.

Finally, a good pedal set is only complete with a LC brake and for 200€ for the whole LC pedal set I don't think that there is a better bargain around.

@ChrisHaye

2 жыл бұрын

Yeah, it's definitely great value for money. I'll be testing it out against the Thrustmaster T-LCM pedals shortly to see how they stack up!

@divinasi0n

2 жыл бұрын

@@ChrisHaye there are multiple 3D printed plastics and rubbers available to purchase on eBay for the T-LCM now that essentially move those pedals up a price point. I hope you'll consider ordering some bits to test out the brake pedal without the included metal springs. Along with a bit of kit from 3DRap to improve brake feel, I'm running my T-LCMs at around 75% loadcell capacity, so I just can't imagine how running far less than that would provide adequate pressure. I cant help but feel this move by Fanatec is a step backwards. With things continually progressing; from gear driven bases to DDs, I don't understand why they've done this.

@LupusAries

2 жыл бұрын

@@ChrisHaye Oh yeah that's a test I would love to see. Since I got on TM ecosystem by buying a used T500 that I got for less than a T300. Those pedals do sound interesting, especially if one compares them to the TC-LM or fitting the T3PA-Pro/T500 Pedals with a Loadcell. I mean the base is good, they are invertible and I'd second @divinasion's Idea, it would be nice to see the mods available for the TC-LM as well as the fanatec Pedals, as IIRC there were some for the old Clubsport elite, like the BBJ Dampers mod. Overall it looks like a nice pedal set, though the only thing I miss is the ability to invert them to a more road car style like with the old T3PA-Pro/T500 Pedals, which with the 3drap Elastomer brake mod are quite nice....although I'd still love to have my gas and clutch spring from the GTEYE's for the G27, as those are a bit weak on the T3PA-Pro/T500 Pedals.

do these make any sense next to Thrustmaster T-LCM? Whick also work no problem with Fanatec wheel bases, as they connect over usbv to pc. (I use them with CSL DD)

Fanatec: Lifts embargo My youtube feed: L O A D C E L L

@ChrisHaye

2 жыл бұрын

Yeah, not much we can do about that. ;)

I live in California and I haven't seen this product pop up on fanatecs website. is it only being sold in Europe? is it just not on their website yet?

Thanks for the review, interested on your opinion on something... I see when you use it there's quite a bit of travel but I use it on a Playseat Challenge so I've had to adjust to about 85% to avoid the Playseat from lifting up. Does one need to travel in the foot as well as the pressure when racing for more accurate muscle memory?

@braveheart4603

6 ай бұрын

The more travel overall then the more distance you have to play with in the trail braking phase, it could possibly translate to a fraction more control and consistency but i think would be very marginal and depending the type of pedal you like might even be detrimental. I just noticed your comment is a year old so you likely have it well figured out lol.

Considering uprading my pedals tbh. I only drive GT3 & the f1 games anyway, so my g29 wheel is fine and i normally have the shifter set up as an ebrake anyway

Always look forward to a CH vid. So well framed and such care taken in every shot. Digging the humour too! Excellent review and i think these pedals will sell well. A friend of mine had a set of tlcms and after about 3 months of use, he braked hard and cracked the whole base almost in 2. He then moved to the fanatec csl elites with load cell and says the difference is night and day

@terrylu4894

2 жыл бұрын

Your friend is Hulk, right? :D

@robertcarr4172

2 жыл бұрын

@@terrylu4894 hahahaha maybe 🤣

Thx for the video. I have a question.. I play only f1 so can I just use the throttle pedal and that loadcell pedal? Because without the loadcell I see 2 pedal sets and with the loadcell I see 3 pedal sets but I want a 2 pedal set with the load cell. Thank youuu

Thank you for video Chris! It seems like a legit value proposition from fanatec.

Great review! When is the release date for the load cell pedal? I see the Black Friday pre-order sale but doesn't say when it ships.

@nmore69

2 жыл бұрын

Feb 9th

Do you also need the USB cable on the pedal when it's connected to the CSL DD?

I’m just thinking if I should buy the csl with LC or the V3. I’m not sure if the LC from the CSL is too hard for me. Can you adjust the V3 more easily?

Well, I just put together my CSL pedals with the load cell kit and my experience is quite the opposite of Chris'. The elastomer for my brake is much harder than Chris'. I can't get anywhere the travel which Chris displays. It appears totally unusable unless bolted to a sim rig. Even then it could still be too hard.

@zunyan2294

2 жыл бұрын

Same here, making me suspect if my legs are too weak.

@neivamotorsport386

2 жыл бұрын

I have the same problem..you know if we can change that??

@MarcLCT

2 жыл бұрын

I just set up mine and I get almost no travel. The 30% sensitivity setting is enough to make it usable but it's nothing like what I'm seeing here

@stuboyle666

2 жыл бұрын

I ended up buying a wheel stand. I ran across some "rubber spacers standoff washers" on Amazon that look similar to the elastomers the come with the pedal. If I can find some that are softer then that might work. The pedal comes with "65" hardness. I think the next softer might be a "45". I think it going to involve some trial and error.

@MarcLCT

2 жыл бұрын

@@stuboyle666 That is a pretty good idea, hopefully it works for you! I bought some elastomers from BBJ Racing on recommendation from a forum. Not the cheapest solution, but hopefully these work when they come in.

wonder if this will replace the CSL elite pedals or if they will make new CSL elites

Do you have to do something to set this up? The pedal I just received doesn't move at all.

Great reviw! I have a particular situation. I recently bought a second hand TLCM pedal a week ago. Than just two days ago, I bought a CSL DD kit that came with the CSL Pedals including the clutch. I left them in their box in case I decide to keep the TLCM and sell them. However, now that the load cell upgrade is released, I wonder if I should get it and sell the TLCM instead. What would be your thoughts? The TLCM have 90kg of force and these ones have 60. However everything else seems to favor the Fanatec. Am I mistaken.

@jgagnier

2 жыл бұрын

I'm in a similar situation. I have a DD and basic pedals, but also TLCMs. The load cell kit would've been an instabuy a few months ago, but it very much seems a lateral move rather than an up/downgrade vs. the TLCM. In the end, I'll probably buy this piece of kit if it allows sims to better recognize multiple devices - a CSL base/wheel and TLCM pedals aren't something sims are always fans of. Can anyone with Fanatec experience confirm that they are seen as one or two devices?

Hey, what would you recommend? CSL Elite pedals without loadcell or these new CSL LC pedals? I'm about to complete my set and this is my only question mark.

@Infigo96

2 жыл бұрын

Boosted media said the Csl LC compared to the elite LC is a side step in performance bit the Csl pedals at least don't have the potentiometers to break. Non LC elites vs Csl pedals LC should be a no brainer...LC all the way

Great review! How do you re-assemble the elastomer stack? I cant figure out where the 2 smallest pieces fit in. Thanks

@makitakanashi7905

2 жыл бұрын

you ever worked out how to put it back together?

230 total price with all the upgrades (assuming you buy with the discount) probably worth spending the extra 130 for the clubsports

@ChrisHaye

2 жыл бұрын

Maybe. I maintain that the clubsports are the best bang for buck pedals you can buy, and I’m a massive fan. But you get a lot of performance/ control for your money with these. But yeah, if you can afford the extra, clubsport v3s with the performance brake kit would definitely be my choice.

@laos85

2 жыл бұрын

I have Clubsport v3 and I like it

@escalator9734

2 жыл бұрын

Yeah, it's 230 buck for some folded sheet metal, 150 for a 2$ load cell. Disappointing as usual from fanatec and their huge margins on add ons

Will this kit fit the old csl elite pedals (the all black ones)? Or will it only fit the new csl pedals?

These look like great value for money. But a TM TLCM can be had for a lot cheaper locally, even without seasonal/clearance sales. I guess these are catered towards those that buy the CSL DD package.

@alpha007org

2 жыл бұрын

T-LCM are great with 3drap brake elastomer. Check it out, its price is fairly low and transforms T-LCM 2x red springs to a real "pressure sensing" pedals.

@s_n9210

2 жыл бұрын

@@alpha007org. I will install a elastomer damper (or two) and a DIY rumble kit soon. :)

@alpha007org

2 жыл бұрын

@@s_n9210 Which rumble kit?

@terrylu4894

2 жыл бұрын

The price is almost the same, but the problem is that there is no official licensed dealer of FANATEC here in China, so I have to import the product abroad and pay extra shipping and tax, which is a lot. FANATEC should expand selling network.

@s_n9210

2 жыл бұрын

@@terrylu4894 I faced a similar predicament with there being no sales network in my country. Hopeful Fanatec will cover more regions in the future.

Anyone know if these will install in the CSL Elite pedal set? I got the 2 pedal set and missed out on the CSL Elite load cell.

Chris can you check if the retail load cell breaks are different than the review ones? many people in your comments and myself as well have really hard ones I have max brake force and reach it after like 2 cm of travel and not even close to your video. and I have a proper rig and mounted then solid.

@ChrisHaye

2 жыл бұрын

I'll reach out to Fanatec and check. I definitely get more than 2cm of travel. Now, the Heusinkvelds, they're about 2cm at a guess, very stiff.

@Sinistic6

2 жыл бұрын

Any word on this yet?

@benniphx

2 жыл бұрын

@@ChrisHaye thx, But I decided an sent them back and went with the V3 Padals with BPK and I love them! they are so much better !!!

@MrTone71

2 жыл бұрын

Same here, would love to hear how retail compares with review. Mine are very stiff. Slowly getting used to them, as I know it's about pressure not travel but a bit more travel wouldn't go amiss!

@stevena2895

2 жыл бұрын

@@MrTone71 I just got a set of Elite with load cell and the LC is stiff too but I'd rather it be the way it is. When I saw the one in this review moving so far I was confused.

Having the stock pedal base against the wall is okay without needing a proper pedal base?

Could I add this new load cell to the CSL elite pedals?

Is it possible to use the csl load cell with csl ELITE pedals? I know they are different but I’m wondering if I have to buy a whole new set up pedals to get a load cell since they don’t sell the csl elite lc anymore

@momorious

2 жыл бұрын

No

Does the new lc work on the old elite pedals?

Your break looks a lot softer then mines … why ?

@christiancyr4073

2 жыл бұрын

Yeah man I think we got fucked by fanatec on this one mine has no travel feels like im just trying to push up against a solid wall and im seeing lots of complains this last month of the same thing

@christiancyr4073

2 жыл бұрын

Took the foamy outta the clutch/brake and removed a rubber and 2 plastic rings outta the load cell put the foamy in feels much better kind of a shitty fix but actually usable

Any word if this LC pedal can be used on the standard version of the old CSL Elite pedals?

@momorious

2 жыл бұрын

Yes there are many words on this. No that's not possible.

I have it and they work nice, but whoever has it should do the spring mod to the load cell like I did. Out of the box the load cell is very stiff and not much travel... I installed a yellow die spring and it makes quite a difference, it's not as stiff anymore and has more peddle travel. Use either a blue or yellow spring to help it not be stiff and supply more travel. And it's a great cheap mod.

@TJLeaver-ef1pc

Жыл бұрын

Hey bro, what are the specs of the spring you used?

@CamaroWarrior

Жыл бұрын

@@TJLeaver-ef1pc 20mm OD, 11mm ID, 25mm length

How does the performance compare with the T-LCM? I don't go anywhere near the 100kg the T-LCM so 60kg is plenty for me. My only gripe with the T-LCM is the pedal distance between the Throttle and Brake is a little too close for comfort even after adjusting the the pedal plates. I'm gonna assume I can actually leave one pedal out to maximise the space?

@ChrisHaye

2 жыл бұрын

Good question. I've used T-LCMs a few times, but don't have a set to do proper testing with. I do have a set winging their way to me though, since I think doing a proper back to back comparison is important!

@ArianrhodTalon

2 жыл бұрын

@@ChrisHaye 👍🏻 will look forward to it. At the price point the T-LCM looks to be the closest competitor

@domb_fanatec2826

2 жыл бұрын

The kg value is misleading. It doesn't account for pedal geometry and is not a measurement of the actual foot pressure required. If you compared these products in actual use, this would quickly become apparent.

@LiamDrives

2 жыл бұрын

I’m sure you could get aftermarket elastomers adjust the stiffness. Either way I’m excited to order mine!

Hello, does anyone knows if you can still do the 2 pedal configuration with just the LC and a throttle?

@ChrisHaye

2 жыл бұрын

Yep, you don't need to connect up the third pedal. The LC brake acts as the 'brain' for the setup, and everything connects to it.

Great video in terms of quality camera work, sound and presentation Chris. In my opinion, the CSL Elite Pedals that I have just sold were probably the last fanatec product I will buy. I understand they were the elite however I just think fanatec are in for the profit above quality and customer experience currently. Take their CSL DD, the proper power pack is extra. Take the pedals in your video, they are cheap but probably same price as their predecessors. They look cheap though, the plastic pedal faces urghhh! Taking away the extra elastomers but then charging extra for a tuning kit when in reality its not a tuning kit but better pedal faces that should have been included already. Nonetheless good video Chris. But fanatec, no thanks.

@DouglasThompson

2 жыл бұрын

I agree with what you said mostly. It's this approach that makes you feel trapped in their ecosystem because you are so heavily invested. The booster kit is a slap to the face, this load cell upgrade costing more than the base pedal set is insulting and there have been other examples similar to this as well. You can't argue that they aren't making among the best quality stuff in this lower/middle price range though... I was invested deep into Fanatec when I first started sim racing more seriously. I have owned the PS4 bundle DD1, csl DD, CSL elite wheelbase, csl elite pedals, V3 pedals, magnetic paddle shifter, hydraulic brake kit, podium hub, bmw gt2 wheel, v1.5 handbrake, and V1.5 shifter. I sold everything except for my CSL DD and V3 pedals and the V3's might be on the chopping block. They really lock you in mentally especially on console. They have a great marketing dept. and design team but customer service and transparency are not top on their list.

@stingingbee

Жыл бұрын

I haven’t had my fanatec stuff for long but I found the csl pedals to be very good and definitely higher quality than my past g29 pedals, I have also had less problems as my g29 ones would get dirt in them and glitch however I have not had the problem with the csl ones. Also about the power pack I think it is definitely overpriced but actually quite clever because what I think they are doing is charging a low price for the wheelbase with 5 nm and a high price for the 8 nm meaning the product is more accessible for those with a smaller budget and while making up for the lost profit from the 8nm power pack

Nice review! Question: Would it be possible to use the clutch as throttle? To get a stiffer throttle pedal.

@domb_fanatec2826

2 жыл бұрын

Yes this is possible.

@slimracer1553

2 жыл бұрын

@@domb_fanatec2826 Thanks!

@slimracer1553

2 жыл бұрын

@@domb_fanatec2826 By the way, are there any differences between the pedals except the spring?

@1027hristo

2 жыл бұрын

@@domb_fanatec2826 How?

@domb_fanatec2826

2 жыл бұрын

@@slimracer1553 Essentially no. The clutch has a wider pedal face, but but you can exchange that for the thinner throttle version.

My LC seems very stiff out of the box and I don't get nearly the travel that they do in this video. Strange that mine seems so different.

@5x22

2 жыл бұрын

you are not alone, my LC has very little travel too haha

@craigjackson9063

Жыл бұрын

Did your pedals bed in? I’ve just got one today and not impressed… I have less than a cm travel at hard press

Hi guys, just to confirm this CSL load cell brake pedal can replace the brake pedal on the CSL Elite ?

How the hell does your pedal travel so far? I feel like mine BARELY moves. Did you modify it?

@n3rdstrength

2 жыл бұрын

In case people are curious in the future. Mine actually loosened up quite a bit over time. It doesn't travel as far as the video but it's much better now.

@MikaTuukkanen

2 жыл бұрын

@@n3rdstrength How long did it take to get it to loosen up?

@n3rdstrength

2 жыл бұрын

@@MikaTuukkanen 2-3 weeks

@Bexal

Жыл бұрын

@@n3rdstrength happy to hear it

my load cell pedal fried my throttle pedal... it also has about 1/4 the travel compared to the one reviewed here. Still waiting on a response from fanatec 5 days later. apparently lots of people are having the same issue. Im now stuck with no pedals and no answer from fanatec.

@iandonkin3759

Жыл бұрын

Did you have an outcome to this as I'm thinking of buying them and I see a few people with this issue?

I'm 6' and weigh over 200 lbs and ride mountain bikes regularly and I can't compress this pedal at all. I mean seriously, it literally moves millimeters. leaning on it with my entire body weight moves it maybe 1 cm. I was so excited to get this as I have the TLCM pedals and I love them, but this Load Cell is like cement. Anyone know if it can be returned for a full refund?

hello! i can see that your load cell brake pedal its fluffier than mine... my brake pedals is extremely hard! how can i fix that? thank you

I dont understand how you can press that load kit so hard? Mine is barely moving, so stiff .. I feel like am missing something, it doesn't feel good. Do I need to unlock something?

@sheik_yerbouti

2 жыл бұрын

I have the same problem. The pedal can't move more than 1-2 cm(1inch) and I'm pressing it really hard

@coastalboat5700

2 жыл бұрын

Try replacing one rubber elastomer with the foam insert in the standard CSL brake. Worked better for me.

Have you heard when the csl elite loadcell will come out ?

@momorious

2 жыл бұрын

Never, it's discontinued.

@niklasbengtsson5721

2 жыл бұрын

@@momorious yes, has figured that out now

I am not saying 12 bits is not enough but you need to account for the losses. That include deadzones and the configration when you use less than 60kg. That makes the usefull resolution around 9 and not 12 bits. For this reason, 16 gives a high safety margin.

Great video as always Chris. Must say im minorly dissapointed here by the load cell offering when compared with the csl elite lc that was just discontinued. Would you recommend someone getting this loadcell option if they already have the base version of the csl pedals or do you think its worth the cost to jump to either csw 3.0s or heusinkwelds?

@ChrisHaye

2 жыл бұрын

Something I hadn’t really considered is that the load cell placement in the old pedal was on the pedal side, so given the mechanical advantage at work in that configuration I have no idea whether those two load cell values are comparable. The CSw 3.0 is still my favourite mid range pedal set, but I think these are priced about right for the value proposition. In fact all three pedal sets you mentioned are. I’m using the Heusinkveld sprints on my main rig, and they’re fantastic. In short, I think you get what you pay for with each set mentioned!

@korsarrokhan1

2 жыл бұрын

@@ChrisHaye brilliant response thanks. Going to need to spend the week figuring things out in my head before the black friday sales haha. Appreciate you taking the time 👍

@domb_fanatec2826

2 жыл бұрын

hi CJ, if you are disappointed because of the kg value, bear in mind that this is pretty misleading. It doesn't account for pedal geometry and is not a measurement of the actual foot pressure required. If you compared the performance of the CSL Pedals Load Cell Kit with the discontinued CSL Elite Load Cell Kit, you might be surprised by the results. But also bear in mind that the CSL Pedals range was not intended to be a direct replacement for the CSL Elite Pedals.

@korsarrokhan1

2 жыл бұрын

@@domb_fanatec2826 the key factors for me were kg value and customization of the pedals in that order so thankyou massively for pointing out that the foot pressure wont relate on a 1 to 1 basic. I wonder do you guys have some stats internally at fanatec reporting the actual nm comparison on the footplate between different pedal sets available? If you do is there a possibility for these stats to be made public? If not to either question then purely anecdotally how would you compare the pressure difference between models? And as always thanks for reading through the publics comments and replying to questions. These interactions really helps develop my perception of the brand and im sure it does for many others.

@domb_fanatec2826

2 жыл бұрын

@@korsarrokhan1 You're welcome! We are considering presenting something along those lines yes.

Hi guys. I find my LoadCell pedal way too sensitive. Is it because is it only 60kg and i should upload to a 90kg? I like to break hard and despite i try settings on my games it's still too sensitive and break too quickly

@Russxm

10 ай бұрын

How'd you fix this? I've got the same issue

My pedal is extremely stiff. Your video makes it look like there is a larger range of travel

Seems like a good set! But considering I use the old CSL Elites with the 90kg, it wouldn't make sense for me to move to the new ones, I think.

@Octavious230

2 жыл бұрын

I have zero interest in upgrading from my old CSL Elites. I honestly think the old set looks nicer and you can adjust the strength.

I don't know how you guys use left foot for braking

Lol you definitely got something different than I did because mine barely moves a cm.

I barely get 1mm of travel in mine. Genuinely disappointing bit of kit. Why is mine so stiff..

@coastalboat5700

2 жыл бұрын

Yo man, replace one of the rubber discs in the LC with the foam that comes with the standard CSL brake pedal. It feels better.

So not really an upgrade if you already have the older CSL Elite with LC with optional shore rated elastomers ? CS V3 Pedals it is then I guess

My LC pedal barely has 2cm of travel! Wtf?! It’s way too stiff. Mounted on a Playseat challenge

Is this item compatible with new Xbox?

@domb_fanatec2826

2 жыл бұрын

Yes. You need to connect the pedals to a Fanatec wheel base, and use an Xbox-licensed steering wheel to activate Xbox mode on the wheel base. Then it will work :)

Love the videos, but please sync up the audio on your talking head shots! It’s off just a frame or two! I can’t be the only one noticing this on these videos right?

@1:44: 928!!!👍👍👍

Uhm, looks a bit spongy when you come off the brake 5:34 🤔

@ChrisHaye

2 жыл бұрын

I think that's more my hesitation and slight re-application. It feels very linear coming off of the pedal.

Warning! All these KZread videos are great and interesting. The one thing they don’t do is inform you what their products are like to live with over a period of time. If you wish to have a happy and content life please take my advise and look at the FANATEC’s own Forum in regards to all the issues they have and their terrible customer service. I have one word to the question should you purchase FANATEC products? DONT. I would have had the same amount of problems with a real race car.. On a lighter note Im very grateful FANATEC do not build motor vehicles.

They sounded clanky and noisy in the vid, no?

@DjWr00m

2 жыл бұрын

Yeah, I've noticed that too. Wondering if it is that squeaky and clunky in real life.

@ChrisHaye

2 жыл бұрын

That's my Sparco seat. I have R200 seats on both rigs, and the both squeak when you brake. :D

👍👍👍👍👍👍👍👍👍👍👍

Swag

The better loadcell design over the csl elite pedals will make this a much more consistent brake than its predecessor.

your sound is off.....

Lol fanatec are getting worse and worse. My tlcm pedals are 100kg and still cost less. Fanatec needs to get straight, no capping

@domb_fanatec2826

2 жыл бұрын

The load cell max value can be misleading. This does not account for the actual foot pressure required. If you compare these products in use, the story is quite different.

@ChrisHaye

2 жыл бұрын

This is an important point. I've got a set of T-LCMs on the way, so I'll be able to follow this up with somo more direct testing.

@carlwhite3471

2 жыл бұрын

60kg seems too light, I'm now running 88kg on my TLCMs and that's up from 75kg.

@s_n9210

2 жыл бұрын

​@@domb_fanatec2826 Probably not the right place to be saying this, but how about Fanatec make their products available to more countries? Every other manufacturer, even some high end boutique brands, ship to pretty much all countries across the globe. And when shipping is paid for by buyers, and it costs you basically nothing, why gimp your sales by only limiting sales to a only handful of countries outside of the EU? I ended up ordering a TLCM today, just because these weren't available for purchase here in Asia.

@domb_fanatec2826

2 жыл бұрын

@@s_n9210 Hi Sanil, we would of course like to serve more countries and regions. But we want to do it properly, which is to say that we have distribution and service facilities in that region for proper shipping and support. This is how it is for the regions listed on our site. It takes considerable time and investment to expand in this way.

I hate it, its too stiff, wish it was adjustable not with your own modifications

First

@ChrisHaye

2 жыл бұрын

Accurate!

Why are you using a 2 year old and completely outdated Fanalab 1.23 Beta Version?!

@ChrisHaye

2 жыл бұрын

Old footage. I didn't want to connect up the DD1 to that rig just to get a quick shot of Fanalab. And since it wasn't relevant to the video, it didn't seem like it was offering any real benefit to do so.

Old pedals were better. Looked better had better build quality and had much better adjustability. Unfortunate…

@isthernes

2 жыл бұрын

Don't forget those are supposed to be one tier below the old pedals. That's why not "Elite" in the name anymore. Besides that, it's true there is less adjustability in terms of the elastomer, but who knows, maybe a "performance kit" is released later.

The cuts to you awkwardly staring into the camera and talking totally ruined the vibe for this video. Like what