I've got a Frigidaire Washing Machine, model GLWS1749AS4 and it was leaking around the axle that the agitator is hooked to.
I took the washing machine apart with the intent of replacing the tub seal, which was likely the problem and could not get the trunnion bolt off. If I HAD been able to get things done, the parts listed below were the ones I would have used.
Frigidaire 5303279394 Tub Seal Kit for Washer: amzn.to/3zjBUHP
Frigidaire 3204405 Outer Tub Bearing: amzn.to/3TG5OPS
Frigidaire 137107000 Trunnion Lock Plate: amzn.to/3FKUlbR
Frigidaire 137539500 Frigidare Lock Plate Bolt (need 2, but I'd look for a cheaper one somewhere): amzn.to/3lw8bbl
Video taken on Google Pixel 7 Pro: amzn.to/3K2rsun
After breaking off the nuts for the trunnion bolt I used a hammer and chisel to try to get the trunnion plate off, but it was not budging. Rather than go the extent of using a grinder to cut the plate off and given the rust on the shaft, general amount of dirt/grime hiding in there, and likely condition of other parts, a new machine is likely in order. Maybe something like this Samsung: amzn.to/3J7GvlX
(As an Amazon Associate I earn from qualifying purchases.)