Face ID Dot Projector Repair Tools Review - I2C/JC/LUBAN
Ғылым және технология
Today, REWA LAB will walk you through a detailed explanation of three dot projector repair solutions and show you the three most popular dot projector repair tools in the industry. Which one is the best choice for repair shops? Check out the video now and you will get the answer you want.
Products recommended in this video:
I2C Dot Projector Repair Programmer: bit.ly/3dAHOsm
Dot Projector Flex Cable: bit.ly/3416OFW
JC Pro1000s Pcie Nand Read & Write Programmer: bit.ly/3j4ySwm
Face ID Dot Matrix Detection Module: bit.ly/3j5ug9l
00:00 Intro
00:12 Face ID Dot Projector Repair Tools Review - I2C/JC/LUBAN
00:54 Comparison Of Repair Process
01:36 Inspection
01:54 Burn Data
02:55 Dot Projector Flex Cable
03:51 Dot Projector Repair
04:49 Test
Any questions and demands please feel free to contact us at: sales@rewatechnology.com
Subscribe us for more latest information.
-----------------------------------------------------------------------------------------
Official Website: rewa.tech/
Blog: blog.rewatechnology.com/
Facebook: / rewatechnology
Instagram: / rewatechnology
-----------------------------------------------------------------------------------------
Пікірлер: 84
Products recommended in this video: I2C Dot Projector Repair Programmer: bit.ly/3dAHOsm Dot Projector Flex Cable: bit.ly/3416OFW JC Pro1000s Pcie Nand Read & Write Programmer: bit.ly/3j4ySwm Face ID Dot Matrix Detection Module: bit.ly/3j5ug9l For more product, please check: shop.rewa.tech/
Nice review. Keep em coming :)
Very good, I liked it.
Amazing!
Oooooo it's magic of rewa
you guys are about to take alot of my money
Super video sir
Very hard work
Big like for you ❤️
Thanks!
Nice 👍
Very good
you always the best 💜
Congratulations mr rewa technology 🥰👍🍎🍏
Hi Rewa thanks for this amazing video! I was wondering if you possibly have the link for the tools used for this repair, such as the grinding tool and the solder wire to short the chip. Thanks!
@Framiga57
3 жыл бұрын
they sell everything you see in their videos.
@rami7229
3 жыл бұрын
@@Framiga57 do you possibly know the wire thickness used when shorting pin 2 and pin 3?
@Framiga57
3 жыл бұрын
@@rami7229 i use a 0.02 mm. enameled/isolated one like this one shop.rewa.tech/detail/0-02mm-varnished-wire-for-mobile-phone-repair-ss-007-oem-new.html
@rami7229
3 жыл бұрын
@@Framiga57 appreciate the help! Thank you
Thank you Rewa technology sharing this amazing video 😍 and I have one question 🙋♂️ JC and i2c replaced dot matrix cable and luban replaced only chip inside dot matrix I can’t understand that dot matrix flex cable damaged or dot matrix chip🤔?
@rewatechnology2008
3 жыл бұрын
Hi, thanks for watching. The dot projector repair tool solutions aim to repair dot matrix chip, damaged flex cable could be repaired by jumping wire or replacing cable.
good 👍
Hey, great video! Thanks for sharing your knowledge
@Abdelali82141
2 жыл бұрын
No every programmer needs the cables that come with it. I2C programmer supports i2c cables and so do JC and Luban.
Dear, thaks a lot for yours videos. Do you have information about Qianli ID Face Dot Matrix Projector? If is possible I need you to help me with the support for the Dot Projector tool. The "QLCX Repair" program is having problems in its last update, and it updated my DotProjector, corrupting the program and leaving the machine inoperative. A hug
Do any flex cable work with any programmer? Or does it have to be specially i2c cable?
I’m confused, so the flex cable is what goes bad on the dot projector? It’s not the encryption chip itself?
With Luban method, it is possible to restore the dot projector, also if I lost the original one? It is right?
This method works only for xs max or for all apple phones with face id issues?
if you have detailed reviews on i2C i6 / Luban L3 mini / JC V1SE / Qianli iCopy , please? Can you share info. thanks!
Hi thanks for this amazing video! What if the Face ID works but I need to change the camera module (frontcam doesn’t) ... can I directly read from the old flex and write to the new module or Will I need to swap the dot projectors?
@nexulp7887
3 жыл бұрын
Do you want to Change Frontkamera?
@dantelangone7761
3 жыл бұрын
@@nexulp7887 yes I’d like
@nexulp7887
3 жыл бұрын
@@dantelangone7761 i Changed iPhone 11pro Frontkamera its very difficult du Not destroy dir Projektor after that repair my face ID functions but Not AS good aß before i Had die restart offen the cellphone to Setup face id.
Hi! I have lost 11pro max dot projector data information chip and eeprom is gone, there is a way to get it somehow? Thanks!
What is meant by "Requires official authorization"?
Wow
was wondering if i can get some help I have the i2c kit and i did the procedure, after i solder the chip on the new flex and tested it on the programmer all 4 lights showed up and passed but when i plug the dot projector into the phone I get "try setting up face ID later" I read and write the data so I'm not sure what's going on
@BeyondWoWJunkies
3 жыл бұрын
Might not be dot projector issue
need to understand, why the mosfet need to be removed? whats the function of mosfet?
👍👍👍👍👍
👍
After doing the repair my NTC is in error, what can be!!??
Could you please provide a link for the small grinding tool?
@BeyondWoWJunkies
3 жыл бұрын
It's a dremel
@ponakka
2 жыл бұрын
@@BeyondWoWJunkies But what is the tip on the video. it looks like some diamond disc cutter or something..
My old iPhone X has Move a little higher/lower, (dot projector) where can I take it to get it fixed?
@thephonedoctors4140
3 жыл бұрын
Im not sure where u are located. But im in Oklahoma and we do these repairs at our shops. We also do Mil in repairs as well if required. So just get back to me if interested
@matthewtrainsandlifts
3 жыл бұрын
@@thephonedoctors4140 I am not in the United States.
@Abdelali82141
3 жыл бұрын
@@matthewtrainsandlifts if in Europe, this is your man kzread.info/dron/LrS7einmzTbMO8s9LGekVA.html
Rewa starts there , where rossman ends :)
temperature n air plz show
I hope that there would be a machine like that to restore the Touch ID function.
@s_car.
3 жыл бұрын
I think there is bro
@caelari1722
3 жыл бұрын
@@s_car. Apple has only the power to do it...
@s_car.
3 жыл бұрын
@@caelari1722 oh ok, cool then
@superiorelectric8295
2 жыл бұрын
@@caelari1722 But Face ID is better than Touch ID
What's the difference between i2c V8,M12,and i6s
Can we send my mobile to fix face id issue ???
wow
And what about JC V1S?
How much money need for repairing my iphone x face id? big fan of u from bangladesh!!
@rewatechnology2008
3 жыл бұрын
hi, for individual repair enqiriy, pls refer to academy.rewa.tech/just-ask
What’s mean “authorization required”?
@alexlino2059
2 жыл бұрын
I have the JC, but I have no authorization, and works very well. Many thet you have to use the signed flex only from them!
How much
@rewatechnology2008
3 жыл бұрын
Hi, for the price of the product, pls check bit.ly/3dAHOsm
選萬隆😘
Take that apple
too expensive as well
I want to repair my smasung mobile. Plz give me contact
Honestly I lost my phone giving me Face ID face #wietechie#
Apple enginer is defeated
Or just send it to apple for a repair
@Malvinmeven
2 жыл бұрын
Noob
jc v1s?????? 🤣
and this is why i never buy Apple products.
340 doller?o Gott!🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️🤦♂️