Thank you for sharing! I especially liked the way you talked through your process and decisionmaking as you were soldering. Definitely inspired me to try a solder pick.
@annjessup16702 ай бұрын
That framework is genius!
@customcraft16 ай бұрын
Thank you for another great lesson Melanie. I enjoy your videos more every time I watch them. This one was fantastic.
@melaniekline4895
6 ай бұрын
Thanks Bob! I really appreciate your feedback. What have you tried now that you didn't know before?
@jose_FitzG3 ай бұрын
thanks for sharing your technique for placing and soldering pieces. This is something I’m still learning and have many failures. I’m working to reducing these, and appreciate your lessons in helping me in that direction. Fantastic effort for a first video.
@melaniekline4895
3 ай бұрын
Glad it was helpful! Check out the video about the silver feather. There are lots of good soldering tips and info in it. Thanks for writing.
@annjessup16702 ай бұрын
Thank you so much for this tutorial! You really are the best at soldering techniques that I’ve seen. And you are great at instructing.
@tammisloan60432 жыл бұрын
This was my favorite video I have watched in your series. Your framework technique is so simple, yet ingenious! Once you learn the basics of soldering, the truly hard part is figuring out how to hold together complex designs. You made it look so easy. I look forward to trying this technique out! It would be wonderful to see other ways to hold things together...
@NehpetsRellek6 ай бұрын
For those, ( like me ) that don't have such a steady hand, find a small bird feather, sharpen with scissors to a sharp point dip the point of the feather into flux, touch the solder with the point of the fluxed feather until the solder attaches to the feather, transfer the solder to the place you want to solder. Place the feather in a safe place away from the flame. A tiny paint brush also works well.
@EM-cg4iy4 ай бұрын
How extremely cool that you shared this technique with us. ❤
@EIIjot9 ай бұрын
These are really pretty. I appreciate you explaining your workflow and showing it. I’ll try this out soon!
@Silverandstoneworkshops4 ай бұрын
Amazing tutorial thank you for sharing. I love my green lion saw too☺️
@meowsaidthecat53383 ай бұрын
Thank you! I was also baffled at how some creators appeared so uneconomic with their sheet metal. I'm returning to goldsmithing after 20 years, and I can learn a lot from you. I use alum in water for "pickling", a healthier alternative if you have no ventilation.
@zachary4225
2 ай бұрын
Interesting, the aluminum and water method. I’m new to smithing. Will try it out.
@PaulBletzer
Ай бұрын
@zachary4225 Alum, not Aluminum it’s a sulfate salt of aluminum. Aluminum won’t do what you need it to do.
@zachary4225
Ай бұрын
@@PaulBletzer thank you Appreciate it
@tywhitmire8602 жыл бұрын
Wow, I love your problem solving skills! This is one of the aspects of silversmithing that I love. I've been learning since 2016 and you are inspirational and very kind to share your talent with us all. I really enjoy watching the master's at work. Your botanicals are very lovely and a treat to see. Thank you oh so much!!
@melaniekline4895
2 жыл бұрын
Hi, thank you!! So glad you watched my videos. I'm anxious to do more in the next few months and appreciate all of your feedback. Good luck on your journey in metalsmithing- it's thrilling!
@pattimessenger62142 жыл бұрын
Beautiful! You’re an artist, and your medium is silver! Thank you for sharing!
@allanthompson9695 Жыл бұрын
Good work Craig Mr Cameraman.
@AlysianaHunter2 жыл бұрын
That was thoroughly enjoyable, thank you for showing everyone! Gosh, I can't wait to get back in a workshop.
@budg52572 жыл бұрын
You make the best videos, thank you for taking your time to do them. Learned many things. Hope you do some more.
@Nrscathy60 Жыл бұрын
Unbelievable. They are so tiny and beautiful. For your first video, you did a great job. Thanks for showing your trick with the support circle of copper.
@constancebrown6711Ай бұрын
You are a great narrator too.
@FridayFrida Жыл бұрын
This is amazing. Thank you so much for showing us. The outer framework is an excellent idea! You are extremely talented and knowledgable, you truly sculpt in silver.
@melaniekline4895
Жыл бұрын
Thanks for writing! Happy new year. Hope you try it!
@saxon12qa Жыл бұрын
Your very talented. Love the detail in your fabrication.
@consueloyoung44842 жыл бұрын
My goodness!!!, you are so amazingly talented. You make this craft look like you are having a lot of fun!!!, I certainly had fun watching you. Thank you so much for sharing your incredible talent and you do the tutorial so well.🙏🏼💗🍀
@melaniekline4895
2 жыл бұрын
Thanks so much for taking the time to write and for watching. Glad you enjoyed it!
@WireWrapJewellerybyDiane2 жыл бұрын
🥰BRAVO! Omg, I was completely glued to the screen, you have incredible skill and lots of patience. I was absolutely blown away by that image at the end where show your pieces next to the penny, at just how small and detailed these pieces are. I have been learning to solder thru lockdown(s) here in the UK by watching YT videos just like yours, thank you so much for sharing your valuable time and teachings with us. I for one am very grateful. Many hugs and happy holdidays. Diane x😍❤🧡💛💜💙💚
@vanny416 Жыл бұрын
Beautiful work and so enjoyable to watch it all come together!
@tishsmiddy712 жыл бұрын
Thank you ☺️ I love your videos, just learning to make headpins ougg try of my wire and only been enjoying bending wire since 2020 !
@shaunandrews6313 Жыл бұрын
Your videos have been so informative and you explain things perfectly , so happy I found your channel Melanie .
@melaniekline4895
Жыл бұрын
Thanks, Shaun! Glad that you feel you learned something helpful!
@sarahjane9517 Жыл бұрын
You are an incredible jeweler! It so fascinating to watch you working. The finesse! Wow!
@mariavfranco45382 жыл бұрын
Wowwww tiny work !!! Thank you for the video , beautiful art!!!!
@jewelator Жыл бұрын
This is an incredible tutorial on fabricating a miniature sterling silver flower! The presenter's attention to detail and skilled craftsmanship were truly impressive. I loved watching the process of transforming raw silver into a beautiful and intricate flower.
@melaniekline4895
Жыл бұрын
You are so welcome! Thanks for watching and for writing. Glad to hear you learned something new!
@Juezma52 Жыл бұрын
What beautiful work! I enjoyed your video immensely. Thank you.
@texasgigi36842 жыл бұрын
Wow! You are so talented! I love your videos. I want to see a video showing the entire process!!
@johndeluca2302 жыл бұрын
I never thought to make a 'fixture' like that. Thanks. Wonderful video.
@melaniekline4895
2 жыл бұрын
Thanks for writing John! Do glad you learned something new.
@irenecase19332 жыл бұрын
Wow, what a terrific demo. So easy to follow you narrative!
@melaniekline4895
2 жыл бұрын
Hi thanks for writing! Many other videos are on my list to create... keep posted!
@annemalone46742 жыл бұрын
Seriously wonderful work, thank you and your camera person! The frame is brilliant. Hard solder all the way is the only way and best, ty
@melaniekline4895
2 жыл бұрын
Thanks for writing! Appreciate you taking the time
@arnedalbakk6315 Жыл бұрын
Hello. Arne from Norway here. What a artist you are🌹. Stunning to se. Thank you, and god bless you.🌹 Arne
@melaniekline4895
Жыл бұрын
Thanks for watching and for writing! So glad you feel like you learned something new!
@cristianebregge8004 Жыл бұрын
Wowowowow❤❤❤❤ the way you work the silver is incredibly beautiful. Thank you for sharing your video❤
@ceciliam714410 ай бұрын
Lovely! Thanks for sharing your skills ❤You are a great teacher!
@melaniekline4895
9 ай бұрын
Thank you so much!
@denisereynolds642 жыл бұрын
really enjoy this video. i am so happy to learn how-to's and you are a natural! you and craig make an great team, thank you both for such a great tutorial!
@melaniekline4895
2 жыл бұрын
Thanks Denise!
@HarmonicEnigma2 жыл бұрын
This was fascinating to watch. I will learn how to solder for the first time next month and I am so excited to make my first piece! Videos like these are so inspirational. Thank you for sharing! :)
@DiamondMounter
2 жыл бұрын
How did the first solder go?
@thupergirl Жыл бұрын
Wow! I learned so much on this video! Thank you ❤️
@melaniekline4895
Жыл бұрын
Thanks for watching and writing! Hope you learned something new and useful.
@TasioPawa2 жыл бұрын
They are so cute! love them! congratulations!!
@melaniekline4895
Жыл бұрын
Thanks for watching and writing!
@TasioPawa
Жыл бұрын
@@melaniekline4895 thank you for sharing, I've recently tried making these and they're so cute
@johanantorre14 күн бұрын
wow, amazing work! thanks for share.
@dondoyle52523 жыл бұрын
New to all this - very informative - thank you so much!
@melaniekline4895
3 жыл бұрын
Thanks for writing! If you really are new to this, it would be good to start here kzread.info/dash/bejne/dIZ70K6Gm9G7ZKg.html
@colettegallagher80062 жыл бұрын
Beautiful. Thank you.
@adia47898 ай бұрын
Thank you so much for this video! Such a beautiful display of skill and experience.
@melaniekline4895
8 ай бұрын
Thanks for telling me!
@sp91234 Жыл бұрын
This was an amazing 1st video; much better than see after years. Kudos to Craig as well. I'd love to see more videos, even online me paid videos. Your instructions are great, very much thoughtful and explained as to make a someone comfortable to try the project. Please consider doing more, maybe other of your flower series.
@melaniekline4895
Жыл бұрын
Thank you Sherri! I'm so glad to hear that you liked it. I hope to create more in the series when I can get back to the bench. Did you find the others I've posted?
@sp91234
Жыл бұрын
@@melaniekline4895 Yes, I've watched 2. They are also wonderful. You are a fantastic metalsmith and teacher.
@madeinkonada2 жыл бұрын
I can't wait to follow along!
@jimkennedy39952 жыл бұрын
I have learnt a lot . Many thanks.
@paulkline91222 жыл бұрын
Amazing work! I'm just getting started in the silversmithing hobby and came across your video. You have a great last name too! 🙂
@jorgeaugustocuro63622 жыл бұрын
Excelente Sra melanie que hermosura gracias por su conocimiento y paciencia bendiciones .PERFECTO .HERMOSO
@KayGasnerKGDESIGNS Жыл бұрын
Very cool, lots of work ❤
@stuartnorth24792 жыл бұрын
thank you for this, ive learnt a lot , great work
@xxxxx9xxxxx92 жыл бұрын
came across to your video. just wanna thank you for being informative and the magnificent work!
@melaniekline4895
2 жыл бұрын
Thanks for taking the time to write!
@Gazz_R Жыл бұрын
Fantastic workmanship!
@melaniekline4895
Жыл бұрын
Glad you like it! Thanks for watching
@Gazz_R
Жыл бұрын
@@melaniekline4895 Loved it!
@user-zx6xj9yb8v4 ай бұрын
Thank you for such a nice lesson!
@heretheredownunder21 Жыл бұрын
Thank you so much for sharing your skils😍
@melaniekline4895
Жыл бұрын
Thanks for watching!
@mariagloriagentilegmsjewer55652 жыл бұрын
Wow this is such an awesome piece technique everything..
@AlanLumsden Жыл бұрын
Mesmerising to watch. You are a very talented lady.
@melaniekline4895
Жыл бұрын
Thanks for watching and writing! Hope you learned something new and useful.
@allanthompson9695 Жыл бұрын
Beautiful and very very creative. Love watching you work. Nice to have your assistant there. I don't like the look of that saw. I know people speak highly of them, but it seems to really get in the way.
@user-tc3ew6cm5i Жыл бұрын
I follow you all the time I am a goldsmith myself, 😍😍Bangladesh
@leslieorth3602 Жыл бұрын
That was awesome
@tishsmiddy716 ай бұрын
Great video ❤
@lelasart2 жыл бұрын
WOW just WOW!
@davidackerman5303 Жыл бұрын
I create a lot of floral stuff in my studio as well. Very good vidio and your work is top notch.
@mariagloriagentilegmsjewer55652 жыл бұрын
These are amazing!"
@njcaveexplorer2 жыл бұрын
The math! I feel your pain!
@seamuspurcell50652 жыл бұрын
beautiful work
@1171 Жыл бұрын
I have a pair of sterling silver calla Lilly set of screw on earrings and a a matching broach I received it from a friend and she said it was her mother’s and I don’t know 🤷♀️ how old it is but your work reminds me of the set . Very beautiful work I’m a gardener and I don’t see it now days and I will be checking your s out. Just beautiful!
@elizabethpullan846 Жыл бұрын
That was absolutely incredible, thank you for sharing. Would you be able to show how you put in into the frames?
@bandilla7317 Жыл бұрын
Wow nice it is beautiful very interesting.
@janiemachiz5756 Жыл бұрын
Amazing !
@Devin.S4Ай бұрын
this is amazing
@lauriesbella1252 Жыл бұрын
Wow very beautiful..
@louonUT2 жыл бұрын
It was disappointing not to see more of the finished flower,. First video I have seen and will be watching more for pure enjoyment to watch someone create.
@cyclone23 Жыл бұрын
Great videos! Could you maybe do a video on what basic tools that you would want to start with? Also could one start practicing these techniques with something cheaper like copper?
@melaniekline48952 жыл бұрын
Thanks for writing and for watching!
@mariagloriagentilegmsjewer55652 жыл бұрын
Thank you
@pamkriner59453 ай бұрын
Very sweet! Will you cast these when they’re completed?
@joti9387 Жыл бұрын
Great work, great video, great explanation and great magic trick. Just a question. Why not make the copper circle from silver, so you can melt all the soldered wires including the circle afterwards all together?
@mariacaychoavalos8621 Жыл бұрын
HERMOSO. He quedado fascinada con la técnicas que usas. No entiendo el ingles. Por favor si pudieran colocar subtítulos es español, seria fantástico. Gracias. FELICITACIONES
@angelaszul96622 жыл бұрын
Dear Lord woman! You got the patients of Jesus! I have no idea how you do that without “stroke level” blood pressure!
@dragonshoarddesign30946 ай бұрын
I have been doing this professionally for 7+ years I am still trying to figure out how some of us jewelers can do this job for years and years with as much craning their necks I see other jewelers do. The military put a bunch a wearing I my neck I have titanium plate in my neck to repair c6 c7, I have a bunch of equipment to make sure I don't crane as much as possible, and I still have problems at times with pain.
@flowerabby2 жыл бұрын
This is so beautiful, love to see your process! I love the Krause bur, what size do you use?
@melaniekline4895
2 жыл бұрын
Hi Abigail, thanks for watching and writing! I've never seen a size selection of Krause burrs, have you?
@markgibson8358
2 жыл бұрын
Krause burrs are among my faves to use. I’ve never seen a “size” on them; they’re just Krause burrs. Abigail, if you go to Rio & search on “Kraus” (sp?) you’ll see the options that come up.
@markgibson83582 жыл бұрын
Melanie, this is such an inspiring video. I’m making a gift for a dear friend and I intend to steal this technique lock stock & barrel. I have one small suggestion to make - when I make head pins I dip them in flux before I ball the end. I like the result of fluxed balled ends vs. non-fluxed. But that’s just a suggestion b/c you clearly know what you’re doing!!
@melaniekline4895
2 жыл бұрын
Mark, I'd love to see yours when you finish! Thanks for writing
@markgibson8358
2 жыл бұрын
@@melaniekline4895 Melanie….I had to figure out how to do this using my phone and some pics I made. I promise I make better jewelry than videos, but I’ll figure those out. In the meantime, I can’t thank you enough for teaching me this wonderful technique!! kzread.info/dash/bejne/iqqHyLJme5vLkpM.html The stone is a granite cameo that I bought from Rio. The recipient of the gift is a bit of a nutter when it comes to butterflies, so the theme of my handmade gift was a no-brainer. I made an oval frame using patterned wire; made several flowers, a setting, & Bob’s your Uncle. If this wasn’t my first try at making these miniature flowers I’d have liked to carve some flowers native to my S Florida home. Having seen what you do I know it can be done. If you happen to be searching for an idea for a new video, can I suggest “Carve Flowers By Species Because Not All Flowers Look Alike, Stupid”. Or something like that. Actually that’s probably a harsher title than you’d like. Maybe replace “flowers” with “floral”? 😂
@melaniekline4895
2 жыл бұрын
@@markgibson8358 great job, Mark! Thank you
@HarmonicEnigma2 жыл бұрын
would you mind sharing where you purchased your stencils from? :)
@oculusangelicus89782 жыл бұрын
Beautiful work! just wish your zooming in wasn't so blurry, perhaps try using a 4K camera with macro zoom capabilities so that it doesn't get blurry when zooming in on small objects? Just a suggestion, I'm assuming that you are using silver solder, for all of this I would suggest using silver wire as a framework so that you don't waste silver solder on copper and not be able to get it all off when trying to save the silver wire, left over on the frame. if you use silver wire, then you can throw the whole thing into a crucible and not have to worry about anything, just remelt it for another project. Just a suggestion, I may be missing something but all you're using the wire for is support, then you can have even less waste by residual silver solder on copper wire that cannot be removed. then you can take it to the rolling mill as normal. I really enjoy the fine detail of small pieces like this, your finished work is just beautiful and look very authentic to the original flowers! Fantastic work!!!
@lisajarvis3820 Жыл бұрын
Interesting
@mariagloriagentilegmsjewer55652 жыл бұрын
Thanks for the shortcut on the math it is my worse nightmare
@TaskeenQureshi-qx3tz5 ай бұрын
Hi Melanie 💓 please make a vedio for beginners.all the tools and raw material you are using.can a new beginner make this jewellery ?
@angelaszul96622 жыл бұрын
Someone seriously better pay you a lot of money for that 😳😰
@Mass-jab-death-2025 Жыл бұрын
How did you make those teeny tiny flowers ?
@stephenburton36552 жыл бұрын
5 years ago i decided making jewelry would be my supplemental income so i invested in the tools started making belt buckles with copper then copper n silver then bracelets on and on now 1200 pieces later im making pave eternity bands a 15k London blue with 4 mil halo and wire under gallery with helping hands clay want a pulse welder i think that would be great for your flowers ive always liked handy flux and yes it is sticky i tried the ceramic and cone dont like at all why dont you like handy flux for silver? I use all the time and i to use hard as many times as possible im starting to make smaller n smaller pieces then found you video i really want a pulse welder seems to me it would make life easy to tack pieces then solder do you agree?
@brucefulcher953 Жыл бұрын
Inspirational work. Would like to have a better close up at the end to further enjoy the finished result.
@melaniekline4895
Жыл бұрын
Thanks for your comment. There are lots of things I'd improve in this video! If you just take a good look at the title page, you can get a pretty good look. You could friend me on Facebook and see more there if you are interested. Hope you feel you learned something from watching!
@arhodes2866 Жыл бұрын
Wow
@hamhockshortdock2 жыл бұрын
Maybe better than Bob Ross
@melaniekline4895
2 жыл бұрын
That's a great comment! Thanks for writing and watching
@Mass-jab-death-2025 Жыл бұрын
Is it necessary to ware a shirt with holes in it to make these teeny tiny flowers ? Do you cut your own holes in your shirt or is there somewhere to buy them like that ?
@netcreativedesigns8 ай бұрын
I’m going to make a cosmos flower for a friends wife. Would I also cut the lines from the center or can I hammer a few lines to show the wrinkles in the petals?
@melaniekline4895
8 ай бұрын
Sure you can!
@hephaestushymeryos9322 жыл бұрын
i like
@mariagloriagentilegmsjewer55652 жыл бұрын
The handy Flux how do you get it to be so almost runny..mine from the bottle like that seems like almost paste? Is it just to old?
@melaniekline4895
2 жыл бұрын
Hi Maria! I know what you did last night..... watched my KZread channel! Thank you for watching and for all your comments!! So, you can endlessly water down handy flux with tap water. If it's really dried out, you can even stick it in the microwave with some water on it to soften and thin it. Bastard files are sold everywhere, hardware stores, home depot, Lowe's, harbor freight etc.
@cecechilders62332 жыл бұрын
I’m a babysmith and I’m wondering how you use hard solder all the way through the projects without it coming undone?
@melaniekline4895
2 жыл бұрын
Hi, got your great question and will reply extensively in an upcoming video. Quick answer is that it usually doesn't matter that the hard solder reruns.
@pamkriner59453 ай бұрын
I don’t understand your process for dividing the circle?
Пікірлер: 153
Thank you for sharing! I especially liked the way you talked through your process and decisionmaking as you were soldering. Definitely inspired me to try a solder pick.
That framework is genius!
Thank you for another great lesson Melanie. I enjoy your videos more every time I watch them. This one was fantastic.
@melaniekline4895
6 ай бұрын
Thanks Bob! I really appreciate your feedback. What have you tried now that you didn't know before?
thanks for sharing your technique for placing and soldering pieces. This is something I’m still learning and have many failures. I’m working to reducing these, and appreciate your lessons in helping me in that direction. Fantastic effort for a first video.
@melaniekline4895
3 ай бұрын
Glad it was helpful! Check out the video about the silver feather. There are lots of good soldering tips and info in it. Thanks for writing.
Thank you so much for this tutorial! You really are the best at soldering techniques that I’ve seen. And you are great at instructing.
This was my favorite video I have watched in your series. Your framework technique is so simple, yet ingenious! Once you learn the basics of soldering, the truly hard part is figuring out how to hold together complex designs. You made it look so easy. I look forward to trying this technique out! It would be wonderful to see other ways to hold things together...
For those, ( like me ) that don't have such a steady hand, find a small bird feather, sharpen with scissors to a sharp point dip the point of the feather into flux, touch the solder with the point of the fluxed feather until the solder attaches to the feather, transfer the solder to the place you want to solder. Place the feather in a safe place away from the flame. A tiny paint brush also works well.
How extremely cool that you shared this technique with us. ❤
These are really pretty. I appreciate you explaining your workflow and showing it. I’ll try this out soon!
Amazing tutorial thank you for sharing. I love my green lion saw too☺️
Thank you! I was also baffled at how some creators appeared so uneconomic with their sheet metal. I'm returning to goldsmithing after 20 years, and I can learn a lot from you. I use alum in water for "pickling", a healthier alternative if you have no ventilation.
@zachary4225
2 ай бұрын
Interesting, the aluminum and water method. I’m new to smithing. Will try it out.
@PaulBletzer
Ай бұрын
@zachary4225 Alum, not Aluminum it’s a sulfate salt of aluminum. Aluminum won’t do what you need it to do.
@zachary4225
Ай бұрын
@@PaulBletzer thank you Appreciate it
Wow, I love your problem solving skills! This is one of the aspects of silversmithing that I love. I've been learning since 2016 and you are inspirational and very kind to share your talent with us all. I really enjoy watching the master's at work. Your botanicals are very lovely and a treat to see. Thank you oh so much!!
@melaniekline4895
2 жыл бұрын
Hi, thank you!! So glad you watched my videos. I'm anxious to do more in the next few months and appreciate all of your feedback. Good luck on your journey in metalsmithing- it's thrilling!
Beautiful! You’re an artist, and your medium is silver! Thank you for sharing!
Good work Craig Mr Cameraman.
That was thoroughly enjoyable, thank you for showing everyone! Gosh, I can't wait to get back in a workshop.
You make the best videos, thank you for taking your time to do them. Learned many things. Hope you do some more.
Unbelievable. They are so tiny and beautiful. For your first video, you did a great job. Thanks for showing your trick with the support circle of copper.
You are a great narrator too.
This is amazing. Thank you so much for showing us. The outer framework is an excellent idea! You are extremely talented and knowledgable, you truly sculpt in silver.
@melaniekline4895
Жыл бұрын
Thanks for writing! Happy new year. Hope you try it!
Your very talented. Love the detail in your fabrication.
My goodness!!!, you are so amazingly talented. You make this craft look like you are having a lot of fun!!!, I certainly had fun watching you. Thank you so much for sharing your incredible talent and you do the tutorial so well.🙏🏼💗🍀
@melaniekline4895
2 жыл бұрын
Thanks so much for taking the time to write and for watching. Glad you enjoyed it!
🥰BRAVO! Omg, I was completely glued to the screen, you have incredible skill and lots of patience. I was absolutely blown away by that image at the end where show your pieces next to the penny, at just how small and detailed these pieces are. I have been learning to solder thru lockdown(s) here in the UK by watching YT videos just like yours, thank you so much for sharing your valuable time and teachings with us. I for one am very grateful. Many hugs and happy holdidays. Diane x😍❤🧡💛💜💙💚
Beautiful work and so enjoyable to watch it all come together!
Thank you ☺️ I love your videos, just learning to make headpins ougg try of my wire and only been enjoying bending wire since 2020 !
Your videos have been so informative and you explain things perfectly , so happy I found your channel Melanie .
@melaniekline4895
Жыл бұрын
Thanks, Shaun! Glad that you feel you learned something helpful!
You are an incredible jeweler! It so fascinating to watch you working. The finesse! Wow!
Wowwww tiny work !!! Thank you for the video , beautiful art!!!!
This is an incredible tutorial on fabricating a miniature sterling silver flower! The presenter's attention to detail and skilled craftsmanship were truly impressive. I loved watching the process of transforming raw silver into a beautiful and intricate flower.
@melaniekline4895
Жыл бұрын
You are so welcome! Thanks for watching and for writing. Glad to hear you learned something new!
What beautiful work! I enjoyed your video immensely. Thank you.
Wow! You are so talented! I love your videos. I want to see a video showing the entire process!!
I never thought to make a 'fixture' like that. Thanks. Wonderful video.
@melaniekline4895
2 жыл бұрын
Thanks for writing John! Do glad you learned something new.
Wow, what a terrific demo. So easy to follow you narrative!
@melaniekline4895
2 жыл бұрын
Hi thanks for writing! Many other videos are on my list to create... keep posted!
Seriously wonderful work, thank you and your camera person! The frame is brilliant. Hard solder all the way is the only way and best, ty
@melaniekline4895
2 жыл бұрын
Thanks for writing! Appreciate you taking the time
Hello. Arne from Norway here. What a artist you are🌹. Stunning to se. Thank you, and god bless you.🌹 Arne
@melaniekline4895
Жыл бұрын
Thanks for watching and for writing! So glad you feel like you learned something new!
Wowowowow❤❤❤❤ the way you work the silver is incredibly beautiful. Thank you for sharing your video❤
Lovely! Thanks for sharing your skills ❤You are a great teacher!
@melaniekline4895
9 ай бұрын
Thank you so much!
really enjoy this video. i am so happy to learn how-to's and you are a natural! you and craig make an great team, thank you both for such a great tutorial!
@melaniekline4895
2 жыл бұрын
Thanks Denise!
This was fascinating to watch. I will learn how to solder for the first time next month and I am so excited to make my first piece! Videos like these are so inspirational. Thank you for sharing! :)
@DiamondMounter
2 жыл бұрын
How did the first solder go?
Wow! I learned so much on this video! Thank you ❤️
@melaniekline4895
Жыл бұрын
Thanks for watching and writing! Hope you learned something new and useful.
They are so cute! love them! congratulations!!
@melaniekline4895
Жыл бұрын
Thanks for watching and writing!
@TasioPawa
Жыл бұрын
@@melaniekline4895 thank you for sharing, I've recently tried making these and they're so cute
wow, amazing work! thanks for share.
New to all this - very informative - thank you so much!
@melaniekline4895
3 жыл бұрын
Thanks for writing! If you really are new to this, it would be good to start here kzread.info/dash/bejne/dIZ70K6Gm9G7ZKg.html
Beautiful. Thank you.
Thank you so much for this video! Such a beautiful display of skill and experience.
@melaniekline4895
8 ай бұрын
Thanks for telling me!
This was an amazing 1st video; much better than see after years. Kudos to Craig as well. I'd love to see more videos, even online me paid videos. Your instructions are great, very much thoughtful and explained as to make a someone comfortable to try the project. Please consider doing more, maybe other of your flower series.
@melaniekline4895
Жыл бұрын
Thank you Sherri! I'm so glad to hear that you liked it. I hope to create more in the series when I can get back to the bench. Did you find the others I've posted?
@sp91234
Жыл бұрын
@@melaniekline4895 Yes, I've watched 2. They are also wonderful. You are a fantastic metalsmith and teacher.
I can't wait to follow along!
I have learnt a lot . Many thanks.
Amazing work! I'm just getting started in the silversmithing hobby and came across your video. You have a great last name too! 🙂
Excelente Sra melanie que hermosura gracias por su conocimiento y paciencia bendiciones .PERFECTO .HERMOSO
Very cool, lots of work ❤
thank you for this, ive learnt a lot , great work
came across to your video. just wanna thank you for being informative and the magnificent work!
@melaniekline4895
2 жыл бұрын
Thanks for taking the time to write!
Fantastic workmanship!
@melaniekline4895
Жыл бұрын
Glad you like it! Thanks for watching
@Gazz_R
Жыл бұрын
@@melaniekline4895 Loved it!
Thank you for such a nice lesson!
Thank you so much for sharing your skils😍
@melaniekline4895
Жыл бұрын
Thanks for watching!
Wow this is such an awesome piece technique everything..
Mesmerising to watch. You are a very talented lady.
@melaniekline4895
Жыл бұрын
Thanks for watching and writing! Hope you learned something new and useful.
Beautiful and very very creative. Love watching you work. Nice to have your assistant there. I don't like the look of that saw. I know people speak highly of them, but it seems to really get in the way.
I follow you all the time I am a goldsmith myself, 😍😍Bangladesh
That was awesome
Great video ❤
WOW just WOW!
I create a lot of floral stuff in my studio as well. Very good vidio and your work is top notch.
These are amazing!"
The math! I feel your pain!
beautiful work
I have a pair of sterling silver calla Lilly set of screw on earrings and a a matching broach I received it from a friend and she said it was her mother’s and I don’t know 🤷♀️ how old it is but your work reminds me of the set . Very beautiful work I’m a gardener and I don’t see it now days and I will be checking your s out. Just beautiful!
That was absolutely incredible, thank you for sharing. Would you be able to show how you put in into the frames?
Wow nice it is beautiful very interesting.
Amazing !
this is amazing
Wow very beautiful..
It was disappointing not to see more of the finished flower,. First video I have seen and will be watching more for pure enjoyment to watch someone create.
Great videos! Could you maybe do a video on what basic tools that you would want to start with? Also could one start practicing these techniques with something cheaper like copper?
Thanks for writing and for watching!
Thank you
Very sweet! Will you cast these when they’re completed?
Great work, great video, great explanation and great magic trick. Just a question. Why not make the copper circle from silver, so you can melt all the soldered wires including the circle afterwards all together?
HERMOSO. He quedado fascinada con la técnicas que usas. No entiendo el ingles. Por favor si pudieran colocar subtítulos es español, seria fantástico. Gracias. FELICITACIONES
Dear Lord woman! You got the patients of Jesus! I have no idea how you do that without “stroke level” blood pressure!
I have been doing this professionally for 7+ years I am still trying to figure out how some of us jewelers can do this job for years and years with as much craning their necks I see other jewelers do. The military put a bunch a wearing I my neck I have titanium plate in my neck to repair c6 c7, I have a bunch of equipment to make sure I don't crane as much as possible, and I still have problems at times with pain.
This is so beautiful, love to see your process! I love the Krause bur, what size do you use?
@melaniekline4895
2 жыл бұрын
Hi Abigail, thanks for watching and writing! I've never seen a size selection of Krause burrs, have you?
@markgibson8358
2 жыл бұрын
Krause burrs are among my faves to use. I’ve never seen a “size” on them; they’re just Krause burrs. Abigail, if you go to Rio & search on “Kraus” (sp?) you’ll see the options that come up.
Melanie, this is such an inspiring video. I’m making a gift for a dear friend and I intend to steal this technique lock stock & barrel. I have one small suggestion to make - when I make head pins I dip them in flux before I ball the end. I like the result of fluxed balled ends vs. non-fluxed. But that’s just a suggestion b/c you clearly know what you’re doing!!
@melaniekline4895
2 жыл бұрын
Mark, I'd love to see yours when you finish! Thanks for writing
@markgibson8358
2 жыл бұрын
@@melaniekline4895 Melanie….I had to figure out how to do this using my phone and some pics I made. I promise I make better jewelry than videos, but I’ll figure those out. In the meantime, I can’t thank you enough for teaching me this wonderful technique!! kzread.info/dash/bejne/iqqHyLJme5vLkpM.html The stone is a granite cameo that I bought from Rio. The recipient of the gift is a bit of a nutter when it comes to butterflies, so the theme of my handmade gift was a no-brainer. I made an oval frame using patterned wire; made several flowers, a setting, & Bob’s your Uncle. If this wasn’t my first try at making these miniature flowers I’d have liked to carve some flowers native to my S Florida home. Having seen what you do I know it can be done. If you happen to be searching for an idea for a new video, can I suggest “Carve Flowers By Species Because Not All Flowers Look Alike, Stupid”. Or something like that. Actually that’s probably a harsher title than you’d like. Maybe replace “flowers” with “floral”? 😂
@melaniekline4895
2 жыл бұрын
@@markgibson8358 great job, Mark! Thank you
would you mind sharing where you purchased your stencils from? :)
Beautiful work! just wish your zooming in wasn't so blurry, perhaps try using a 4K camera with macro zoom capabilities so that it doesn't get blurry when zooming in on small objects? Just a suggestion, I'm assuming that you are using silver solder, for all of this I would suggest using silver wire as a framework so that you don't waste silver solder on copper and not be able to get it all off when trying to save the silver wire, left over on the frame. if you use silver wire, then you can throw the whole thing into a crucible and not have to worry about anything, just remelt it for another project. Just a suggestion, I may be missing something but all you're using the wire for is support, then you can have even less waste by residual silver solder on copper wire that cannot be removed. then you can take it to the rolling mill as normal. I really enjoy the fine detail of small pieces like this, your finished work is just beautiful and look very authentic to the original flowers! Fantastic work!!!
Interesting
Thanks for the shortcut on the math it is my worse nightmare
Hi Melanie 💓 please make a vedio for beginners.all the tools and raw material you are using.can a new beginner make this jewellery ?
Someone seriously better pay you a lot of money for that 😳😰
How did you make those teeny tiny flowers ?
5 years ago i decided making jewelry would be my supplemental income so i invested in the tools started making belt buckles with copper then copper n silver then bracelets on and on now 1200 pieces later im making pave eternity bands a 15k London blue with 4 mil halo and wire under gallery with helping hands clay want a pulse welder i think that would be great for your flowers ive always liked handy flux and yes it is sticky i tried the ceramic and cone dont like at all why dont you like handy flux for silver? I use all the time and i to use hard as many times as possible im starting to make smaller n smaller pieces then found you video i really want a pulse welder seems to me it would make life easy to tack pieces then solder do you agree?
Inspirational work. Would like to have a better close up at the end to further enjoy the finished result.
@melaniekline4895
Жыл бұрын
Thanks for your comment. There are lots of things I'd improve in this video! If you just take a good look at the title page, you can get a pretty good look. You could friend me on Facebook and see more there if you are interested. Hope you feel you learned something from watching!
Wow
Maybe better than Bob Ross
@melaniekline4895
2 жыл бұрын
That's a great comment! Thanks for writing and watching
Is it necessary to ware a shirt with holes in it to make these teeny tiny flowers ? Do you cut your own holes in your shirt or is there somewhere to buy them like that ?
I’m going to make a cosmos flower for a friends wife. Would I also cut the lines from the center or can I hammer a few lines to show the wrinkles in the petals?
@melaniekline4895
8 ай бұрын
Sure you can!
i like
The handy Flux how do you get it to be so almost runny..mine from the bottle like that seems like almost paste? Is it just to old?
@melaniekline4895
2 жыл бұрын
Hi Maria! I know what you did last night..... watched my KZread channel! Thank you for watching and for all your comments!! So, you can endlessly water down handy flux with tap water. If it's really dried out, you can even stick it in the microwave with some water on it to soften and thin it. Bastard files are sold everywhere, hardware stores, home depot, Lowe's, harbor freight etc.
I’m a babysmith and I’m wondering how you use hard solder all the way through the projects without it coming undone?
@melaniekline4895
2 жыл бұрын
Hi, got your great question and will reply extensively in an upcoming video. Quick answer is that it usually doesn't matter that the hard solder reruns.
I don’t understand your process for dividing the circle?