Aftermarket f150 running board motors on a 2015 F150
Жүктеу.....
Пікірлер: 11
@clintmillertxАй бұрын
If you choose to replace the motor leaving the brackets in place, these are the sizes you’ll need: Allen = 6mm, bolt heads = 13mm, wedge bolt = 10mm.
@mikeshhh50863 ай бұрын
Good video and nice info. Thanks for putting it out there, man.
@boudreausauto1881
3 ай бұрын
Appreciate you saying that my friend
@jeremyduncan3654 Жыл бұрын
Great video. I need to do this job on my ‘16. Can the running boards be deployed manually? Mine are stuck in the up position. Thanks for taking the time to make this tidbit.
@boudreausauto1881
Жыл бұрын
Ya you can, they don't put up much of a fight actually. You'll be surprised. Thanks for watching!
@jeremyduncan3654
Жыл бұрын
@@boudreausauto1881 I inspected the motor housings on both and they look swollen with rust. I might have to remove the whole assembly at the same time and work on it that way. The way the torque rod is clocked, makes the 30 mm torx screws a PIA to remove and with Illinois rust? 😬
@oldfarthacks
11 ай бұрын
@@jeremyduncan3654 Do yourself a favor, do your bushings at the same time. They are I assure you quite messed up.
@98XC13 ай бұрын
Good job. I think Ford deserves extra hate for making those boards without proper grease zerk and not making motors better protected from elements. Seems like all ford engineers are living in GA or AZ and never saw rust belt...
@ronaldembrey4533 Жыл бұрын
Do you have the part numbers
@boudreausauto1881
3 ай бұрын
i dont sorry, the cus. supplied his own parts on this one i think.
@clintmillertx
Ай бұрын
Running Board Motor Without Bracket AL3Z16A507A for 2007-2014 Ford F-150 (as found on Amazon)
Пікірлер: 11
If you choose to replace the motor leaving the brackets in place, these are the sizes you’ll need: Allen = 6mm, bolt heads = 13mm, wedge bolt = 10mm.
Good video and nice info. Thanks for putting it out there, man.
@boudreausauto1881
3 ай бұрын
Appreciate you saying that my friend
Great video. I need to do this job on my ‘16. Can the running boards be deployed manually? Mine are stuck in the up position. Thanks for taking the time to make this tidbit.
@boudreausauto1881
Жыл бұрын
Ya you can, they don't put up much of a fight actually. You'll be surprised. Thanks for watching!
@jeremyduncan3654
Жыл бұрын
@@boudreausauto1881 I inspected the motor housings on both and they look swollen with rust. I might have to remove the whole assembly at the same time and work on it that way. The way the torque rod is clocked, makes the 30 mm torx screws a PIA to remove and with Illinois rust? 😬
@oldfarthacks
11 ай бұрын
@@jeremyduncan3654 Do yourself a favor, do your bushings at the same time. They are I assure you quite messed up.
Good job. I think Ford deserves extra hate for making those boards without proper grease zerk and not making motors better protected from elements. Seems like all ford engineers are living in GA or AZ and never saw rust belt...
Do you have the part numbers
@boudreausauto1881
3 ай бұрын
i dont sorry, the cus. supplied his own parts on this one i think.
@clintmillertx
Ай бұрын
Running Board Motor Without Bracket AL3Z16A507A for 2007-2014 Ford F-150 (as found on Amazon)