*IF YOUR DOOR IS JAMMED SHUT, Just use a flat head screw driver to pop off the inside of the door handle. Then use a 10millimeter socket to take the two bolts out to release the handle from the door plastic. Then on the inside you will see two cables, they are for the top and bottom latches. One of them likely popped out. Just use a needle nose plyers to pull on it and door will release. *Then jump to the final 6 minutes of this video to see how I fixed it so it didn't happen again. Hope this helps.

Thank you so much. After seeing what the likely problem was, I simply removed the door handle and sure enough that was my problem also. I was able to reattach the cable using a pair of pliers. No need to remove the door panel!

@strokersmoke1

2 жыл бұрын

Was just about to ask this question lol sweet deal

I have been looking for a video because this is exactly what happened on my 2010 so now I can actually go fix it so I want to say thank you for actually making a detailed video on your problem, I really appreciate it

@demolitionnoobs

3 жыл бұрын

Hey no problem glad it helps. I made the video because I was struggling to figure out the problem as well. Good luck!

THANK GOD FOR THIS VIDEO

Thank You for your time. My 2015 has the same issue after i close the rear door to hard because at -25°C nothing work properly.

Excellent thanks.

Just what I needed. Thanks 2012 exactly the same

How do you do this fix if you're unable to get the door open to work on it?

@demolitionnoobs

Жыл бұрын

Sorry just saw this. Mine was stuck like that too. I tried to loosen up the plastic so I could get access to the handle from the inside and see why it was stuck. If I remember right, after I got part of the plastic off I was able to reach inside and open the door manually flipping the latches holding the door shut with a tool. Hope that helps

What if the lock on the bottom won’t open and the cable is jammed? I can’t get inside that hole

@kieferkitching7250

2 жыл бұрын

I have the same problem with my 2012, had one autobody guy diagnose the problem. But can't figure out how to fix it.

@demolitionnoobs

2 жыл бұрын

I'm not sure. I'd say if there's no way to break it loose after getting the door plastic off and exposing the inside, you might have to have a professional figure it out.

6 mm not quarter inch

I thought your video says how to remove the door inner plastic you just removed the door panel you didn't remove the inner plastic