No video
EZ-Troll Tray Installation - how to recess your trolling motor foot pedal
Hey guys, thought I'd do a video of this install. It was a lot easier than I thought. I used the Velcro instead of screwing the pedal in place for the mobility.
Thank you for your support!!! Please comment, rate and subscribe!!!!
Пікірлер: 93
*This makes my old motor look like a toy **enjoyable.fishing** recommend it's well built. I haven't had it on the water yet, but I'm very sure it will perform just fine.*
My man!! About to do this same thing to my boat and found a video from you!!!🎣💪
@TackleJunky81
2 ай бұрын
Right on! 👊💪
Way better than minn kotta! Powerfull and efficient. I paired mine with a 100ah battery and could easily troll for fish 10hrs at 2-3 speed. When full at 5 it can easily go 5-7 mph.
@TackleJunky81
11 ай бұрын
Right on! 👊
My boat has the recess for the troller foot pedal and I don't like it at all. I would much rather be able to position my foot pedal where I want. You did a good job explaining the installation.
This was a great video! I followed the footsteps and took me an hour. Thanks
@TackleJunky81
2 жыл бұрын
My pleasure! 👊
Sick! Wish I could do this to my boat, but because it is older, that is right where my trolling motor battery is.
@TackleJunky81
10 жыл бұрын
Yeah, it's a nice setup, sucks about your boat though. Thanks for watchin!!
Nice job on the install vid. I installed my tray last spring and its way easier to control the boat now.
@TackleJunky81
10 жыл бұрын
Thanks bud!! Yeah, I'm sure it's going to be a lot easier to control. Definitely looking forward to Spring!!!
Nice install and explanation. I will be traveling down this path in the next few weeks.
Hi Sir !!! Amazing, nice work and Beautiful video,thanks for all and have a wonderful day....God Bless you and all your family too....thanks !!!
@TackleJunky81
4 жыл бұрын
My pleasure!
I own a 1996 Zx180 skeeter and this would be a very nice up grade in contrast to just having the petal control on the top of the floor. Thanks so much for posting this video TJ81. I know what I will be adding later on when I can. Thanks Kevin the Kevinator
@TackleJunky81
10 жыл бұрын
Yeah, it's definitely a nice upgrade and I think you'd really like it. Thanks for watching Kevin!!
Wow!!! That looks sweet, I would defiantly do this this winter but I use my rod locker. Great video man love it!
@TackleJunky81
10 жыл бұрын
Thanks Cole!! It was a fun install, and definitely looking forward to trying it out.
Nice video brother. I just picked up a Stratus and will be installing one of these asap. thanks again for this informative peice.
@TackleJunky81
8 жыл бұрын
+BassHooker689 _ Thanks dude!!
Looks KiLLeR Jim! Sweet upgrade for not much effort! Nice job
Nice informational video. Good luck with your new and improved trolling motor!
@TackleJunky81
10 жыл бұрын
Thanks bud and thanks for watchin!!
Awesome vid! Getting ready to install one myself, thanks for the info and pointers.
@TackleJunky81
10 жыл бұрын
Thanks bud and no problem...it's pretty easy.
good work man! i think i'd be too paranoid to ever try that if i owned a bass boat.
@TackleJunky81
10 жыл бұрын
Thanks Elijah!! LOL, yeah, I've been wanting to do this for a couple of years and I finally got the nerve up to cut in to my boat and I am sure glad I did!!
@FishingThePNW
10 жыл бұрын
right on!
I like it! I will make sure to do this when I build my own boat!
@TackleJunky81
7 жыл бұрын
Thanks Peter!
the new trolling motors have a peddle that is really slim almost no need for the tray but i guess if you have a different brand that is still big its awesome.
Good video James, that looks awesome! Great job on it!
Awesome video. Thanks for sharing that.
@TackleJunky81
10 жыл бұрын
Thanks Jordan...no problem bud!!
I got one on the way right now. What is your opinion of it after taking the boat out? Does the pedal sit flush with the deck? Easier to control the steering? I'm extremely excited to get mine installed!
Awesome. Thanks for the great and helpful Vid.
@TackleJunky81
10 жыл бұрын
No problem bud!! Thanks for watchin!!
That came out so dam sweet dude! Good job
@TackleJunky81
10 жыл бұрын
Sure did brotha!! I cannot wait till Spring to get that boat wet again!!
@TeamRippnLipz1
10 жыл бұрын
TackleJunky81 Me either i am dying to do slobbin..
keepp up the awesome vids man!!
That's pretty cool man
@TackleJunky81
10 жыл бұрын
Sure is Kevin. Spring can't get here fast enough!!
That's very cool.
Great Video!
I have a 2009 Basstracker Pro Team 170Tx. Luckily, I won’t have to take out tubes because they’re not there. Did you run the pedal wires thru the front of tray, so the wires are behind the panel. That’s what I plan on doing wondering if you ran the wires the same way. Thanks
@TackleJunky81
7 ай бұрын
I did not. I ran them under the front panel along the side.
Looks awesome
@TackleJunky81
10 жыл бұрын
Thanks man!!
The template must be smaller than the actual tray, because the lip of the tray would be bigger and go over your cut, correct?
sweet!
What is a cool foot, wat does it do??
Looks pretty awesome if only I had a boat :( lol
@TackleJunky81
10 жыл бұрын
Yeah, it helps to have a boat, LOL!!! Thanks for watchin!!
Do you feel like you put the tray to close to the seat? I have a 95 Stratos and I’m about 2.5 from the front of the boat. I keep hearing everyone say put it as far forward as you can but I’m only about 5’9 lol.
@TackleJunky81
Жыл бұрын
It was comfortable to me.
3 min of how to tape something, don't forget the center line!
my tray did not come with screws, what length of screws do you suggest?
Do you still have the tubes and that plate because I would like to have that to put in my boat 😂
@TackleJunky81
2 жыл бұрын
😆 I don't even have that boat anymore.
Thinking about doing one of these in my 2013 Pro 175 TXW just wondering if you think it will work on that model as well not sure if they have moved the support beams or anything can't find any info on where they are. any help or tips would be great awesome video and channel.
@TackleJunky81
7 жыл бұрын
Not sure, you may wanna call tracker. Good luck and thanks for watching!
@TheFluffyNightmare
7 жыл бұрын
I have the tray and plan to do the install this week. I used a flexible camera and looks like the supports beams are in the same place as the older models. the only thing I'm a little worried about now is im a big guy just hope cutting a whole in the floor doesn't weaken the floor to much. will update once i get the install done.
Very cool set up. Do you know how I can find out what's under my deck? I have a 2020 Tracker pro 170. Would love to put a tray on it.
@TackleJunky81
4 жыл бұрын
You may wanna contact Tracker.
@jimbenton4661
10 күн бұрын
You ever find out about adding this? I have a 2024 pro 170 and been wondering also.
Hey there, I have a 2009 170TX. That doesn't have the rod tubes, just the one main rod locker. I use this all the time. Do you think if I do this addition i would be screwing something up??
@TackleJunky81
8 жыл бұрын
+Jared Prashaw Boats are a little different I'm sure, but the tray does eat up some of your depth so you may not be able to fit as many rods. I could still slide a few under my tray if I needed to.
Awesome
@TackleJunky81
10 жыл бұрын
Thanks bud!!!
I bought this same boat the tracker 175 txw and I was wondering if you have had any major problems with it?
@TackleJunky81
8 жыл бұрын
+CrushinRed No problems at all.
@DoobiesStokeShop
8 жыл бұрын
Thank you*
Did panther sell to eztroll?
@TackleJunky81
4 жыл бұрын
No clue.
well damn i loved the video but damn it having to give up my rod holders. i think i will just have to live with out mine being recessed.
@MadsWorld34
6 жыл бұрын
update did you happen to notice if you could move the rod holders to the side. because i really want to recess mine. but i love my rod box
what is the length of the tray including the ovrlap?
@TackleJunky81
9 жыл бұрын
will thompson 20 1/2"
Noice
@TackleJunky81
10 жыл бұрын
Damn right brotha!!!!
now all u need is couple power poles!
@TackleJunky81
10 жыл бұрын
That's what I keep telling my wife!! After one more Humminbird, those are next on the list!! Thanks for watchin!!
Yup i made the mistake of ez troll it's flimsy and moves when you use your foot pedal got rid of mine and went with an aluminium one.
@TackleJunky81
6 жыл бұрын
porboysdream I've had zero issues with mine, love it!
Like I said....
There fitting there boot on a Txw. tracker
@TackleJunky81
7 жыл бұрын
Sweet.