Extreme BMX Repair Using the WRONG TOOLS!‼️🤯
Ойындар
Watch along as we push our BMX workshop skills to the limit.. With this Extreme BMX rear wheel revival inside the skatepark! 🚀🔥 Without the correct equipment, we’ve used our imagination & BMX restoration mastery to turn this worn out wheel into a special custom front wheel! 🤩♻️
.
Follow us 👉 @t77bmx 👈 RIGHT NOW!‼️ So you don’t miss our next Extreme BMX rescue mission!
Пікірлер: 1 500
Ah you made a front wheel from a rear wheel! Great idea
@oakzy3647
Ай бұрын
He’s tuning it
@user-gy1ej9tq7h
Ай бұрын
可以翻译吗
@cora777x
Ай бұрын
😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
@marcelodonascimento920
Ай бұрын
❤❤❤❤❤❤
@almudhorry2029
Ай бұрын
@@user-gy1ej9tq7hah kau membuat roda belakang menjadi roda depan.
Chilling under the ramp at a skatepark while its raining is a vibe
@chriscarr1787
Ай бұрын
Or not well😢😢😢😢😢😢😢😢
@Christopher-ko9op
Ай бұрын
Yeah it is. The rain, the wind, the cold but you're in a little pocket of shelter. The feel of the cold steel, the sound. I can imagine it.
@reeNeey_
Ай бұрын
@@Christopher-ko9opperfectly described. While reading this, I was sent back to the very old skating days ❤️
@goodhouse91021
Ай бұрын
And probably sitting in piss 😅😅
@Christopher-ko9op
Ай бұрын
@@goodhouse91021 lol don't ruin it!
“Mum that strange man’s under the ramps again”
@T77BMX
Ай бұрын
Hahaha 🤣
@eliteculture1519
Ай бұрын
Keeps the park cleared though 😂😂
Bro reinvented the wheel.
@bradleyhorn4249
Ай бұрын
Underrated comment
@patrickmcgillicuddy9227
28 күн бұрын
Damn I thought the same kudos
@CruisinCaprice
28 күн бұрын
Retuned the wheel more like it
@user-hc9sk3mg1h
27 күн бұрын
A shit vibe 😂
@Headtoppaman1989
27 күн бұрын
Not really... wheel builds are a pretty common thing...
I was feeling like I was dumb, but then I saw this short and it made me feel better.
@David27mk
26 күн бұрын
very good 😂
@ninjamigs1766
26 күн бұрын
😅
@mirza6399
25 күн бұрын
why ??
@taylortorres3769
23 күн бұрын
@@mirza6399 because he turned a back wheel into a front wheel
@jeffkrantz9916
22 күн бұрын
😁💯👍😆
Yeah that alignment was accurate as hell😂
The patience you have to have to to true a wheel is insane.
@user-zr4un6tk8b
Ай бұрын
Yes I am a dirt bike rider and grew up working on them. One job I will never ever do again is respoking a rim. Fk that I just buy new rims when I need them
@immabadelmo4969
Ай бұрын
Used to work in a small town hardware store shop that did a little bit of everything, this was one of, if not my least favorite things we'd fix lmao. Soooo time consuming
@richardlea818
Ай бұрын
We used to just use the brake pads to gauge them. I think it took me around 3 hours to lace and tru a wheel
@CapUnlimited
Ай бұрын
I was thinking the same thing
@bmxrider71
29 күн бұрын
I actually love building wheels. Best I've done is on my Hyper and i built both in about an hour and a half start to finish.
I can't lace a.rim in my house let alone ina park in the rain with wrong tools😂
@user-jr1ki4ee7q
Ай бұрын
I was gonna say very, very good, although I’m just gonna keep it positive very good very good content very good content you Musta had a good father or a good guardian to show you some stuff about mechanical
@conorharford5117
Ай бұрын
Me too. i have one sitting in my front room for months
@Eddi3xBac0n
Ай бұрын
trial and error. practice makes perfect
@user-dd2yz3yu2q
Ай бұрын
This and 10 speeds is the worst of bike building
@tonberdy9806
Ай бұрын
@@conorharford5117pppp😊ppp😊pp😊pppppppppppppppppppppp😊ppppppp😊p😊😊pppppppppppppp
Гений. Ломал заднее, устанавливает переднее.
@T77BMX
Ай бұрын
Yes! We needed a front wheel and this rear Rim was in perfectly good condition, so we recycled it! ♻️
@Vlada_Taran
6 күн бұрын
🤣🤣🤣
This the kinda sheet I been doing my whole life man 😂😂😂 I appreciate this video 😂🤙
before vs before😆
Only a real rider can do this. Back in the day we’d take our bikes apart every morning and tune everything up. Awesome 🤘
@fotis3v480
29 күн бұрын
Yeh you tune your sit heights.😂 It's a bmx about the only things changing is seat height and tire pressure.
@69TheSuperbad
28 күн бұрын
@@fotis3v480 get fuckin' rekt. You just got boomersplained to. Love you both, much love and respect. Hopefully you both can resolve your differences respectfully.
@taylortorres3769
23 күн бұрын
He literally turned a back wheel into a front wheel. He’s got 2 front wheels now
When u feel dumb, just remember this guy exists
@CXVI2
Ай бұрын
try doing this urself bucko
@Text-SpeechStories
Ай бұрын
Look at the caption first
@yikes6969
Ай бұрын
Useless comment
@LoneWolfHustle
Ай бұрын
😂😂😂😂
@AngryChair6
Ай бұрын
What did he do wrong?
chops back wheel. but back wheel is there when he is under the thing, then puts in a new front wheel?
@jopequi
Ай бұрын
Creo q es para poder centrar la rueda, puede utilizar el trinche como guía
@Ferrari255GTO
Ай бұрын
@@jopequi weon lo que dice es que despues de cortar la llanta trasera, monta una delantera pero al montar la delantera hay una trasera montada
@elite_riddimzgaming3427
Ай бұрын
@Ferrari255GTO cutting rear spokes, a wheel is complete.....made up of a tyre (the rubber bit) a rim (the metal bit the tyre sits on) spokes and a hub (the centre piece in question). Can confirm he never cut a tyre. Yes he did mount a rim that was on a rear hub to a front hub, probably bought a new rear complete then used the old one as its a sqaured edge rim....most g sport or skylark front rim's have a rounded edge....he wanted matching wheels not one rounded one squared in a set
@Ferrari255GTO
Ай бұрын
@@elite_riddimzgaming3427 yes, i know what both spokes and spoke nipples are, i was generalizing. Also llanta is Rim, not tyre, tyre would be Neumatico o Cubierta
@benjammin893
Ай бұрын
yep. you're exactly right. it's a total setup oopsie video
Наши руки не для скуки, Работа, ради работы. Продолжаем в том же духе.
@T77BMX
Ай бұрын
We made a NEW front wheel for someone to ride down the skatepark! Glad you enjoyed the content
@bawz1773
Ай бұрын
qeq
@gangnygny4535
28 күн бұрын
ему бы в армию бордюры красить
Video ended when he found out how difficult is to true spokes by eye
@T77BMX
Ай бұрын
Hahaa! 😅 Yes we actually finished it off inside the workshop using the tool. But this method is possible… just very hard like you said!
@elparpo9
Ай бұрын
@@T77BMX good video!, i even adjusted mu wheels some time ago, lateral truing is easy but having a round wheel isnt! haha cheers keep on the good work
@bmxscape
23 күн бұрын
@@T77BMX if you start by threading every nipple just to the point where every t hread is covered, known as "zeroing spoke nipples", every spoke will be evenly threaded and you can then just add 2 turns per spoke at a time going around the wheel until its tight. if it was a good rim to begin with and proper length spokes you will get a true wheel
@TorontoPopulistConservative
18 күн бұрын
@@elparpo9 You've gotta loosen the spokes where the wheel is too flat and tighten the rest, or tighten the spokes where the wheel juts out and loosen the rest. Radial truing is definitely harder than lateral. I would recommend going back and forth between radial and lateral truing for the best results.
@elparpo9
18 күн бұрын
@@TorontoPopulistConservative thanks, and 2 (two) hands full of patience
Yeah I’m just gona pop down the bike shop and buy a new wheel
@FrustratedBaboon
Ай бұрын
Chicken
@Indicasativa55
Ай бұрын
@@FrustratedBaboon definitely mate but tbf I know if I did it my bike would never work agin
@Tim_On_Line
Ай бұрын
В этом теряется весь вайб DIY.....
@Indicasativa55
Ай бұрын
@@Tim_On_Line 🤷
Just happened to have the right length spokes with him but not the right tools 😂
@shanewinslow7285
Ай бұрын
😂😂
No one can truly claim to be a Zen Master, until they've laced a wheel from scratch.
My guy snapping those tire rods like it's nothing
Bro made it look way too easy
@CrypticArtsStudios
Ай бұрын
It's called editing....
FTP G*59
@yeryehaua9165
Ай бұрын
G59 till the grave
wheel building kinda goes hard ngl
pro in truing dangg!
@private-nobody6667
Ай бұрын
Brought me back in the days when I used to work in a bike shop and one of our specialties was creating wheels from scratch, not an easy job. 😊
You a real one my guy.
@T77BMX
25 күн бұрын
Thank you my brooo!! thats too kind 👊👊
His patience is unmatched
I'm stuck at step 1. Now doing it to other bikes to gain enough experience for the other steps
@T77BMX
Ай бұрын
Ohhh nice!! Haha just the sitting spokes? 🤣🫡👊👊
Wheel building is one of the hardest parts of bicycle maintenance
@T77BMX
9 күн бұрын
YES! I Couldnt agree more! aha 🔥🔥
he attacked that wheel like it owed him money
@T77BMX
Ай бұрын
🤣🤣🤣
@shanewinslow7285
Ай бұрын
😂
Anyone who actually rides knows most g sport and skylark rims that are front mounted have curved walls not squared ( for brake purposes on a rear only brake set up) so he obviously wanted a complete matching wheel set not a curved and sqaured so hes put a squared rim on a front hub so both front and rear wheels match
@shanewinslow7285
Ай бұрын
Now i understand lol ty. My ocd would probably have me do the same... but minus doing it myself 😂
@wf8045
26 күн бұрын
Thank you for explaining. I was confused
Bro I need a new rear rim u got any old ones u can ship
@elelly1845
Ай бұрын
They're identic There aren't front or rear rim
@Ferrari255GTO
Ай бұрын
@@elelly1845 i think he's asking for a full rim not just the ring of the rim, otherwise there'd be no need to specify
@bmxscape
23 күн бұрын
@@Ferrari255GTO point is there is no rear rim, however there are rear hubs and rear wheels. proper terminology is important when dealing with wheels. tire rim spokes hub all together make a wheel.
This deserves way more views.
@T77BMX
25 күн бұрын
Thank you so much bro thats awesome!!! 👊👊👊
No way you did it at the skate park, thats hard core bro 😂😅😊
@T77BMX
25 күн бұрын
Hahaha my guyyy!! thanks brooo much appreciated 👊👊👊
i honestly never knew you could do this. thanks for the education.
My man's went on Straight tweaker status
@T77BMX
25 күн бұрын
HAhahaha 🤣
I see the truing at the end haha😂😂🙌🏽
@T77BMX
Ай бұрын
Haha!! Glad you liked it!
If you can fix a bike , you can join the Royal Navy
I really spoked to see the end result, amazing 👏
@T77BMX
25 күн бұрын
Thanks brooo!! 🤣👊
And then you forgot a Torx Screwdriver 😜
@T77BMX
25 күн бұрын
Hahah yes that would be even better brooo!!! 👊
The people who made the bike be like 😭
Bro demolished his old wheel to construct a new wheel
@T77BMX
25 күн бұрын
haha yep!! the spokes were too rusty they all broke really easy. And the old hub needs a full internal service. But the rim was in perfect condition! thanks bro 👊
Who knew a homeless man was this skilled?
@T77BMX
9 күн бұрын
Thanks bro! 🔥🔥
Bro ain’t no way you finished that shii by eye.😂💯
Not gonna lie, you had me in the first half😅
The unemployed friend on a Tuesday afternoon
@T77BMX
25 күн бұрын
HAhaha. Not quite... But thanks for the comment! 🤣
@Watergiant95
25 күн бұрын
@@T77BMX entirely satire, turned out great and you did something I never knew before.
The unemployed friend on a Wednesday afternoon lol
Irony being when the wheel wasnt even straight
@T77BMX
25 күн бұрын
hahaha its ok it is now! 👊👊
Sheeott, I thought you was going to make a basketball hoop.
@T77BMX
25 күн бұрын
Hahaha!! niiice man, thanks for the comment👊👊
@TheKrazyinjun
25 күн бұрын
@@T77BMX 👊👊
This is an influencer that can actually teach you something
@T77BMX
25 күн бұрын
Thanks a lot Bro! 👊👊
Someone should build this guy a workshop so he could earn a living doing this. He's quite skilled at it.
Reminds me of my childhood 💯💯💯💯 love it 😊
@T77BMX
Ай бұрын
Wiiicked! Thanks for the comment dude we are glad you enjoyed it!
i remember the days piecing together bmx bikes out of spare parts from others and most the time only using wrong tools working with bare minimum
@T77BMX
25 күн бұрын
Haha yess!! thats what BMX is all about!!👊👊👊
Now *THAT'S* "BeSpoke!" 😊
@T77BMX
25 күн бұрын
Waheyyy!! thats an aweosme comment bro! thanks so much 👊👊👊
The patients of Kobe to do that all at the park lol I would have forgotten some tool that I need to complete it I’m sure😂
@T77BMX
25 күн бұрын
Hahaha! That’s so true bro I was really stressin that I would forget something 🤣🤣👊👊👊
You know what they say, one man’s skating ramp is another man’s garage. 😅
Bro just reinvented the wheel
@T77BMX
25 күн бұрын
HAhaha thanks broo!! 👊👊👊
Yup. That's how it's done! Watch and learn!
@T77BMX
Ай бұрын
You the man!! 🙌🫡
@joeaznorth
Ай бұрын
@@T77BMX check out the komatsu pc01 for building jumps. I want 1 so bad
Didn’t know that shorts can be that long 😂
@T77BMX
Ай бұрын
Cheers dude!
switched from water, to H20😂
Now i want to hear a mash up of a track with the sound affects of this video
@T77BMX
25 күн бұрын
Hahaha no Way! that would be hella sick!!! 👊
This takes me back to when I use to ride..
@T77BMX
25 күн бұрын
YES!! thats awesome bro thanks for the comment!! 👊👊
You'd be surprised how few people can work on a bike
@T77BMX
25 күн бұрын
YES! thats so true bro 👊👊
A bike shop would’ve charged me $700 to do that.
@shanewinslow7285
Ай бұрын
God damn 😮
I was about to say "OMFG WHY WOULD YOU DO THAT TO YOUR WHEELS😭" until i realized.
Putting all the spokes in on the same side of the hub is crazy
Not a lot of people know how hard it is to respoke a wheel. Color me impressed😅 I threw out so many lightweight GT rims in my day because I had no idea how to do anything with them at all😅
@T77BMX
25 күн бұрын
Hahha niice!! yeah the old school rims were super weak they must have broken every weekend!! Glad you enjoyed the content, thanks for the comment!👊
@mathewdecorse5748
25 күн бұрын
@@T77BMX I had a set of 1987 gt gold rims (idk specifically) but as a 13 yr old I could lift the while GT with a pinky easy, most of it got stolen. Chopped right out of highschool but that ol GT took everything I gave it. Went thru dirt vert canal and street ramps. Ol girl took anything I could give it(unlike my hs gf 😆). Now I think about jumping on a bike I gotta let the ER know before I set out 🤣
You know that you could painted it the way it were without needing to cut the strings😅😅😅
@T77BMX
25 күн бұрын
Thanks for the comment bro! Unfortunely the old spokes were rusty they didnt spin on the nipples and they were breaking super easy!
@luizfreitas1315
25 күн бұрын
@@T77BMX thanks for elucidating that my friend
He is a genius. He took the back Will off and put it on the front of the bike wow.
@T77BMX
25 күн бұрын
Thanks broo!! yes the Spokes were too rusty and the Hub needs full internal service. We re-used the rim because its in good condition! thanks bro 👊
This is how a tweeker rotates his tires
Lacing wheels always pissed me off so bad lol
@T77BMX
25 күн бұрын
HAHAHA yeppp! its a pain in the A**! 🤣👊
This guy is a super genius. He took the back wheel off and put it on the front. Maybe you shouldn’t quit your day job just yet.
@T77BMX
9 күн бұрын
Because we created a NEW front wheel for our customer. The old Rear hub needs internal servicing & The old spokes were rusty and seized - So this way we have created an awesome NEW front wheel without having to throw anything into the bin! 🔥🔥🔥
You're on the level if you're repairing stuff with the wrong tools.
@onelovejl8098
Ай бұрын
Lol an so what the job was done perfectly
@darthpalagus3820
Ай бұрын
@@onelovejl8098 That was my point
“Bro I just pulled up to the park where you at I don’t see you anywhere” Him : “oh I’m just under the ramp, doing weird stuff”
Man this dude works fast !!! 🤔
@T77BMX
25 күн бұрын
Thank you broo!! 👊👊👊
He turned wheel to wheel. Amazing
@alphaomegazulu8451
Ай бұрын
F u, want a piece of me? Us riders stick together just like the local drug dealers yall became and now we war.
Snapping sounded like perry the platypus theme😂
@T77BMX
25 күн бұрын
Hahaha someone else said that too!! hahahaha bringgs back some memories 👊👊👊
Smokin that good stuff 😂
That unemployed friend on a tuesday
Trued that wheel like a champ
@T77BMX
25 күн бұрын
Thanks brooo! 👊👊
Mate no graffiti at the skate park 😂
@T77BMX
Ай бұрын
🤣🤣🤣🤣 hahahaaa 👊
Like the calm passive aggressive asmr
Sounds like everyone be living next to Leaf blowers these days lol
Crazy mechanic skills he’s done that 50xs at least it’s not easy at all
@T77BMX
25 күн бұрын
Thank you so much bro!! yes re spoking can be sooo hard sometimes! thanks for the comment broo 👊👊
Was you able to catch any rips bro 😎
@T77BMX
9 күн бұрын
Hahah thanks for the comment brooo! 🔥🔥🔥
Good work man👍🏽
@T77BMX
Ай бұрын
Thank you bro!! 🫡
No son, you cant hang out at the bike ramps alone this evening...... 🤨
"Hey see that wheel?" "Yah!" I gonna destroy it and put on a similar one..ya know, like a smart people does!"
@T77BMX
25 күн бұрын
YES! Exacltly. Because the rear wheel was Broken so we used our brain to create new Wheel out of the Rim that was still working!
Spray painting without a mask on is wild.....
I thought like damm, if u aint wanna fix ur bike, u are free to not do it, but then it turns out all fine 😅
At first I thought the tire would stay on the rim, when you clipped it
Next time, don't clip the spokes in the first place.
@T77BMX
25 күн бұрын
Thanks bro! unfortunately the spokes were too old they were all rusted and broken!! so the nipples didnt work anymnore... We re-used the rim because its in good condition! 👊👊
I love lacing and truing- I use to sit at my coffee table and build a set every night after work for local shop. They would pay me 50 dollars a set to build them. My garage had pallets with hubs, rims and spokes.. it was a fun side gig.. i miss that in my life
My entire question from the beginning was how were you going to get it true i guess i wasn’t disappointed but definitely not satisfied lol 😂
Man breaks wheel. Man rebuilds wheel. Viral video.
I had no idea spokes on a bike rim could be replaced or adjusted. Cool
This short really spoke to me. 😩🥺
@T77BMX
9 күн бұрын
Hahahahaa!!! 🔥🔥
Started the video on the rear wheel then it miraculously turned into the front wheel
@T77BMX
Ай бұрын
Yes! We recycled the Rim Into a new front wheel! So happy with how it came out 😎
@RussY0
Ай бұрын
@@T77BMX so you put a new back wheel on?
@cloudsteele1989
Ай бұрын
@@RussY0 He took the back wheel of a different bike, added a front hub + spokes on it, because he needed a new front wheel for his bike.
@RussY0
Ай бұрын
@@cloudsteele1989 I didn’t notice a different bike
@RussY0
Ай бұрын
@@cloudsteele1989 ah I see. Didn’t see that bit
Never been good at trueing, plus I lost my nipple twister.😂
Nice job homie😊❤
When you get that good Heisenburg blue rock