@Miranda Detailing, thanks for doing a phenomenal job on my baby. It is surreal getting to relive the experience again. You have now done my car as well as my wife's Telluride. When its time, we will most definitely be back!

@MirandaDetailing

2 жыл бұрын

You’re welcome! 😎👍🏼

@cynthiaenglish2736

2 жыл бұрын

Very wise owner to make the decision to get this service. Your car looks 🔥🔥🔥

Phil, this was one of my favorite videos, love how it turned out. Also, I really like how you work with your wife and the banter between you two.. Great example to others out there.. Thanks for all you do.

@MirandaDetailing

2 жыл бұрын

Thanks so much!!😎👍🏼

There's nothing quite like coming home after a long hot work day & watching the 2 of you freezing 🥶 😀. What a gorgeous 🚗, as always great job.

Jessica and Phil power couple flossing mad whips in any weatherYou two are awesome!, So is the cat👏🏾👏🏾.

I just did an Iron decon on my 20yo WJ Jeep and it was amazing watching all the Iron dissolve away! Just doing that step made my paint feel sooooo much smoother.

Looks stunning, Phil! 😯

Big one Phil that baby is sparkling ✨ hands down the cat 🐈 giving the car his first touch lol 😂🤣😂 keep it up much love 👍👍👍💯💯💯💯💯✨✨✨🐈🐈👊👊👌👌💪💪🤙🤙✊✊

very impressive turn out ..The owner off the vehicle must be thrilled..that red is awesome

@josephryder5259

2 жыл бұрын

I am, Phil did an amazing job!

Oooooo, Camero looked good when it was finished

guy I know used to drive as a transporter. He has told me stories you would not believe. Told me he was transporting to a new car dealership. One of the hydraulic lines blew a fitting. sprayed fluid over one of the vehicles. His boss told him to pass it through a car wash a few times.

@MirandaDetailing

2 жыл бұрын

🤦🏻‍♂️ Aw man!! Craziness!! Thanks for sharing!

Great job Miranda

Love the videos, Phil! Your hard work doesn't go unnoticed.

Love y'all chemistry! Keep winning Phil! Thanks for sharing your expertise ‼️

That freaked Me out a bit seeing it’s mid August at the time of viewing. I have some of Koch Chemie’s products. I’ll give them a try soon. Great video as always. Thank You for sharing. Terrific work.

Another one of your great jobs Phil! Enjoyed the video from start till finish!

Nice job😀 I like when you showed the ceramic in time lapse.

Great job Phil

Outstanding results! Looks great 👍

Big thumbs up on this video! Garage organization is cool to see also👌

Fifty minutes of intense viewing pleasure! You also show that it is not necessary to blame the brand, but the user. As you clarified about the coating. grtz

Man that car looks delicious!! Y'all knocked it out the park as always 👍🏻👍🏻

@MirandaDetailing

2 жыл бұрын

Thanks!

Great video Phil. Gorgeous color red!! 👏🏻Bravo

Enjoying my morning coffee with a Miranda detail video. Now im motivated , going to wax my car with some 3D speed.

Great job 👏🏾👏🏾

Very nice Phil!

@MirandaDetailing

2 жыл бұрын

Thanks bro

Great video and information, thank you!

Flawless work by the Marvelous Mirandas! Thanks for walking us through the steps. The car looks amazing 🔥🔥🔥.

@MirandaDetailing

2 жыл бұрын

Thanks!

Beautiful work on what could have been a challenging car. I am really impressed with the Koch chemise polishes.

The car looks gorgeous and I love the color, absolutely awesome job 😁👍❤️

Fantastic job! The car looks 👍! Great information as always.

Great job that car looks amazing

Beautiful looking car so much better.. ive just getting into doing my car and it's looking good for 12 year old thats outside all year round.. plus I'm 70 year old lady and I love it...thank you for your tips...

@cynthiaenglish2736

2 жыл бұрын

Go for it June! Age is nothing but a number, especially if you love cars!

BTW i love the channel. Liked and subscribed.

That is a beautifull....... SQUIRRELL!!! Car dang it I meant to say it's a beautiful car!!! Fantastic job as always.

Thank you sir for all this information and I wanna appreciate it the way you explain how to use the product it’s amazing product and you are the professional sir thank you to teach me you listen today do you have a nice day I’m from Los Angeles it’s amazing job professional

Excellent video... ceramic coatings are such easy money 💰

Wow! Amazing

car looks amazing! beautiful SS great job guys

I appreciate all of your videos MiranGang! I admire how detailers like you two go above and beyond on the idea of what detailing is! It isnt just get some soap, slap a mitt on the car, and call it a day. No, you take into consideration some common sense and new ideas that can be implemented on a detail both int/ext. Your very informative videos make us detailers who want to up our game smarter, efficient, and wise about our detailing processes. You, along with other car related channels, basically inspired me to start my detailing business and a KZread channel to also inform my fellow detailers on products and methods! There is never a day I dont learn something new, and with your videos I am inspired to go above and beyond! Passing some love from Los Angeles! Take care and stay safe MiranGang!

@MirandaDetailing

2 жыл бұрын

Thanks so much! We really appreciate that.

I think you just sold me on that Koch Chemie line. Been eyeing it for a while. I’ve also heard quite a few people saying the paint on those Camaros can be real finicky. Nice work 👍 also was that a new Ethos coating I saw when you were showing your coatings? Guardian? Never heard of it

@MirandaDetailing

2 жыл бұрын

Nice! The Ethos Guardian label was actually an old bottle. They since changed the name.

Great job btw! Looks awesome:) and I wonder If that’s like tree sap, like my parents car gets it a lot because they park under a tree. I don’t know what kind of tree, but definitely thought the clay would’ve removed it. I use this M-Tech tar&sap remover. Super old product but gets that stuff gone for me I like the hard work 🙏🏽

Ughh just thinking of snow made me cringe.. great video as always!

Hey @ 3:12 a Maryland Tag :)

Great video!! Love seeing the whole process. Did you apply anything to the hood? Car looks 🔥

@MirandaDetailing

2 жыл бұрын

Thanks! Yeah we applied a spray coating on the matte hood.

Hi Phil i am about to apply tec 580 to my car. It will be my first time applying a ceramic coating. Awesome video and very informative. Wondering if you have any other videos featuring that type of ceramic coating. Thank you!

@MirandaDetailing

6 ай бұрын

Hi. Cool! That coating is super easy to use. It’s very similar to Gtechniq CSL and EXOv5 in application and removal. So if you search our channel for ceramic coatings will find tons of videos on them

Awesome video and product review good friend. All u needed 2 make a great video is a Mopar than its perfect. Lol.give Jess my best. B well good friend

Phil and Jess awesome job great tutorial and explanation for new comers and mobile detailers that do this on a daily base awesome finish looks outstanding as always be safe God bless William from extreme optimum auto detailing pr give me a call

Hello Phil + Jess from Australia ;) Great finish on the Chev guys just like it should of came from the dealership, I wouldn't have been a happy boy with that crap all on the rear end..

Hey Phil, please try Feynlab Ceramic Lite!

Little goes a long way !!!!

Really nice job Phil. 👍 I’m using a Koch Chemie polishing system and it works really great for me. I like it. By the way, did you see a new version of your SPTA cordless polisher yet? It have a new design and finally 6 speed rpm controler by wheel on top of machine. I’ll order it asap 🤩

@MirandaDetailing

2 жыл бұрын

Thanks! Yes I did! I have one coming in soon!

@misaak1898

2 жыл бұрын

@@MirandaDetailing oh great, I’m curious on your review of this new SPTA CP 2.0 😁

@MirandaDetailing

2 жыл бұрын

Me too!! It looks VERY much like the Flex cordless. 🤔

I agree with that rinsing, foaming, then rinsing is unnecessary, just prerinse then contact wash. But whatever makes it enjoyable😊. Beautiful Machine tho!!

@dubpassatvr6

2 жыл бұрын

I used to do just what you are saying, and would be pissed when I would see all the swirls on a vehicle that had just been polished weeks before. I then started foaming and rinsing in between my pre-rinse and contact wash and it is considerably noticeable that no new swirls or marring is being introduced. that little extra saves on having to re-polish a vehicle and remove valuable clearcoat.

@MirandaDetailing

2 жыл бұрын

That’s awesome to hear!!! Thanks for sharing.

Man, you gotta love August... as Summer starts winding down and you're in a full on winter coat and get up! Oh, and a snow storm to boot! LMAO! You know I love you and your wife, Phil! :) So question: did you do the roof or the hood at 38:22? You said roof, then hood, now I'm all confuzzled. I don't know whether to drink the thing with a microfiber applicator or to drink it with nylon gloves! Arggghhh!!! I really love how the color pops! By the way, those spots you saw? I had them on my 21 Audi A4 when the dealer washed my car. I got a little upset when I saw the spots, thinking they were some man juice someone sprayed on my car, but after scrubbing lightly with my TW Ceramic Detailer Spray, they came off. Took a few attempts, but they came off. Didn't help with the Cold Summer Sun (another jab - LOL) baking the spots in, or else they would have come off more easily. I think it's a combination of the hard water at the dealership and the type of soap (or lack there of) they use when they wash a car down after service. It's weird! It's why I don't ask them to do the courtesy wash anymore, unless it's actually Winter in the Winter months, not August (ok, ok, I'll stop). And by the way, once I'm settled in at my new house, I am ordering your start kit you ...compiled? ...Collaborated? *lost look* with Car Supplies Warehouse. I got the Lake Country Orange pads from Walmart.com, and they're awesome! Exactly as you said. With the starter kit, can't wait to add more to my arsenal. Beautiful work on a beautiful car. By the way, got a good joke for you; A man walked into a bar and said, "ouch."

@MirandaDetailing

2 жыл бұрын

🤣🤣🤣. Too funny man!

Hey, Phill and Jess. Awesome video as always. Thanks for the content. Would you mind me asking about ceramic coating removal? After a couple of years of application, when it's time to reapply the coating, what is the process to remove? Thanks a lot!!! Keep up with the awesome work!

@MirandaDetailing

2 жыл бұрын

Hi. Thanks. Great question So basically we inspect the coating and see how its doing. if it looks like its not performing well its most likely at its end. so a strong wash and a polishing with a light polish will remove the rest of anything that may still remain then panel wipe and re-coat as usual.

@rjanuari1978

2 жыл бұрын

@@MirandaDetailing Thank you! I thought we'd need to compound. I am glad I asked the question to you guys! Thanks you so much for all the content and all the help!

That is one beautiful looking car and that's coming from a Challenger owner. That stuff at 15 minutes, could it be fall out and the dealer didn't use fall out remover or something when they did their prep work. When i bought my Challenger, it was lightly used with 10k on it and the dealership had it parked at their off site compound which was next to a concrete plant. There was a nasty fall out layer on all the flat surfaces and it looked a bit like what you showed. My detailer had to polish the whole car to remove it.

Hello sir! Just wanted to let you know that Metal Coat has been reformulated and is now a 3 year coating! You know you have the new version when you have the tube with the new design. Thanks!

@MirandaDetailing

2 жыл бұрын

Cool! Thanks for the Info!

Your shop looks warm and cozy. Did you apply a topper to coating? You recommend toppers? Hi wife.

@MirandaDetailing

2 жыл бұрын

Hi. Oh yeah we used Technicians Choice Detail Spray.

Hey man thanks for the videos. It's really that cold up there? In Alabama it's still stroke out hot lol

@MirandaDetailing

2 жыл бұрын

Thanks! 😂 No this was filmed a while back.

@thebadgladdadd5218

2 жыл бұрын

Ok I was like " this climate change has gotten way out of control " lol You guys have helped me soo much I love your attitude. My wife asked how come your wife is not in more videos?

@MirandaDetailing

2 жыл бұрын

🤣🤣🤣. She’s camera shy!

Hey Phil what kind of light are you using when you polish?

@MirandaDetailing

2 жыл бұрын

You mean this one? amzn.to/3uKcz6r

Cool video bro! Looks like an easy to apply coating. What's the longevity on it?

@MirandaDetailing

2 жыл бұрын

Hi. Thanks. Well there is not a lot of info on the durability of this one. Most of these coatings are usually 18-24 months.

@AB-NYC..-77-

2 жыл бұрын

@@MirandaDetailing oh ok thanks!

I'll take the cat..lol

Hi Miranda... Nice Video... what did you use to protect the hood?

@MirandaDetailing

2 жыл бұрын

I just used Gtechniq C2V3

@cesargonzalez3071

2 жыл бұрын

@@MirandaDetailing thank you for the answer Blessing for You and your Family.

What can and can’t be used on that vinyl material ? To clean and protect

@MirandaDetailing

2 жыл бұрын

So for matte vinyl like that you can wash per normal. Just don’t use any strong APC’s or degreasers on it and let them dry. But you can use spray waxes, sealants, and even spray coatings and regular coatings on it also. I always do a test spot on a corner to make sure it’s fine.

What’s the update on that ethos costing you grabbed at the end. Just picked one up and wanted to see the longevity of it.

@MirandaDetailing

7 ай бұрын

Hi. Actually I don’t think I used it yet. We primarily stick with Gtechniq and Gyeon now.

@masterwrong3110

7 ай бұрын

@@MirandaDetailing ok

Hey Phil, do you take pictures of the car before and after in case of any damage that was there already?

@MirandaDetailing

2 жыл бұрын

Hi. Yes I will document any damages areas before we start and even before that we try to go over the vehicle with the customer and point out damage.

@LOGOHAWJ

2 жыл бұрын

@@MirandaDetailing ❤️ your work! I’ll keep shadowing you.!!

What Brand cordless DAs are you using big and small?

@MirandaDetailing

2 жыл бұрын

Hi. They are the SPTA Polishers. kzread.info/dash/bejne/o6iaraijp8Ste8Y.html kzread.info/dash/bejne/c5qYldOzY623mpc.html

Hi phil. Big fan and subcriber. My wife is getting a new kia telluride wolf grey and i want to use this coating thanks to your video. On brand new paint could i skip polishing and just apply the coating after a wash ?

@MirandaDetailing

2 жыл бұрын

Hi. Congrats on the new vehicle! I wouldn’t. Skip the polishing, even if it’s just a light polish. It ensures the paint is prepped and will help with any light imperfects. Even on pearl white or silver I go over it with a light polish. But that’s just me.

@mikec5402

2 жыл бұрын

@@MirandaDetailing thanks phil ! Have you tried technicians choice one step ceramic polish ? Would that be ideal choice? I also have turtle wax one and done at home.

@MirandaDetailing

2 жыл бұрын

Yes I have the Tech Choice polish it’s nice stuff! I’m not sure however if it works with other coatings however. It’s considered a primer polish for the Tech Choice coating. I would go with the One and done polish.

@mikec5402

2 жыл бұрын

@@MirandaDetailing i just got the tech choice gear ready to go decided to go with their ceramic polish. Tech choice has this interesting clay polish pad i picked up for da polishers have you tried it ? Their ceramic spray polish is trully a gem i tested some out on my explorer super slick. Will use as topper ! Would enjoy sharing the results with you

Morning‼️. Right now I use carpro multi X APC. What is your top 3 go to APC's in your arsenal?

@MirandaDetailing

2 жыл бұрын

😆👍🏼 Super Clean, Extra Tough and recently P&S APC

@scottsaia5134

2 жыл бұрын

Thx Phil‼️ thank you for all your advice.

Phil if this video was posted in August 01, why was there a winter storm ?

@MirandaDetailing

2 жыл бұрын

This was filmed last winter. But I only got around to posting it in Aug. I have to archive videos to post 3-6 months later sometimes.

Phil, you stated you use about 15ml of a coating. Was that for a single layer? Also did you put any over the hood matte wrap?

@MirandaDetailing

2 жыл бұрын

Hi. Yes I only ever use one layer for most coatings. The only time I dual layer is of using Gyeon Mohs or if the customer wants us to apply EXOv4 on CSL. I believe I used a spray coating on the matte finish.

@MyGuyKirby

2 жыл бұрын

@@MirandaDetailing Does the MOHS require two coats and do you think the effort is warranted over the 1-coat. I used MOHS once in an Autogeek training class but only did a 1-coat. Nice product.

@MirandaDetailing

2 жыл бұрын

Gyeon says two layers is a requirement. But still I’m not convinced that it’s needed. The pro coatings of all companies only need one layer. So the Gyeon Mohs+ is supposed to be one layer also.

Hey Phil. Out of curiosity, what percentage of people would you say are actually paying for paint corrections? It seems like the majority of your customers opt for paint enhancement. Obviously cheaper and saves clear, but I would think some people would go for perfection with nicer cars.

@MirandaDetailing

2 жыл бұрын

Hi. Good question. We have had only 2 or 3 paint corrections this year. Mostly our customers have daily drivers and we always ask them lots of questions to determine why they actually need. And 95% of the time they only need our enhancement service. I explain a little further in this video kzread.info/dash/bejne/oZuntM6Ygqaagps.html

@johnblum2829

2 жыл бұрын

Excellent work guys!

Creo q hacer esas pruebas en carros nuevo no tiene sentido en mi caso lo aria en carros con la pintura opaca para demostrar q se ase buen trabajo

Spots are mostly likely tree sap

What's going on over there? Winter in mid august?

@MirandaDetailing

2 жыл бұрын

🤣🤣🤣 this was filmed a while ago.

can i use meguiar's hot rims all wheel cleaner on the paint to remove the iron on the paint?

@MirandaDetailing

2 жыл бұрын

So that cleaner is a high alkaline cleaner of a PH of 13.5. It’s not an iron dissolving chemical. It’s very strong though. So I would just use it on wheels.

@nunomuacho446

2 жыл бұрын

@@MirandaDetailing thanks friend, was thinking of using it, glad i asked :D

@MirandaDetailing

2 жыл бұрын

You’re welcome! 😎👍🏼

Snow in August?

@MirandaDetailing

2 жыл бұрын

🤣🤣🤣. This was filmed this past winter.

How does windshield washer fluid (50% ethanol, 50% DIW) work as IPA wipe?

@MirandaDetailing

2 жыл бұрын

Not sure. I wouldn’t use it because it has other additives in it.

@ottoeliasson4671

2 жыл бұрын

What about just pure ethanol and DIW? 😓

@MirandaDetailing

2 жыл бұрын

Yeah that could work. I still use regular Isopropyl Alcohol and DIW sometimes.

@ottoeliasson4671

2 жыл бұрын

Aight, thanks 🥰 great channel btw!

Snow storm!? It’s still 90+ here in Florida. Blahhhh

@MirandaDetailing

2 жыл бұрын

🤣🤣🤣.

What is your favorite ceramic coating based on ease of use, durability, as well as cost?

@MirandaDetailing

2 жыл бұрын

Hi would still have to go with Gtechniq CSL. It’s price point vs ease of use and durability is unmatched!

@J1Z06

2 жыл бұрын

@@MirandaDetailing is CSL a good choice on an outdoor only vehicle ? I usually use CSL/EXO. Thanks!

cool cat

@stilleysmobiledetailing1696

2 жыл бұрын

type of link to those blue applicator pads?

@MirandaDetailing

2 жыл бұрын

amzn.to/2WdqsNH

Phil light squirrel i your hilarious😂😂.

How is it going to snow in August? Are you that far behind in videos?

@MirandaDetailing

2 жыл бұрын

🤣. Yup. We still have videos 6 months back. 🤷🏻‍♂️

That Factory paint sure is loaded with orange peel. That orange peel would drive me crazy as a owner

@MirandaDetailing

2 жыл бұрын

Yeah it is. Oh well. 🤷🏻‍♂️

2nd

You applicator is the worse. I did the test myself and now I use almost nothing.

@MirandaDetailing

2 жыл бұрын

😆 it’s not always the tool or the product…the user plays the most important role. We always have plenty of coating left in the bottle using these applicators, and so do many other detailers I have talked to. Out of one 50ml bottle of coating I can get on average 2.5 vehicles. 🤷🏻‍♂️ I guess I perfected our technique and made the best use of the tools we use most. 😎👍🏼