For Allan and his family 💚 ..a wonderful Painter and Decorator who has embraced the benefits of airless paint spraying 👏👏👏

@allanbeasley4565

4 ай бұрын

Hi Pete, thanks so much for that, me and my family appreciate it very much. You have a big kind heart obviously.💚 On the spraying front, bought the Quickshot. Wow! Great piece of kit,👍 Thanks again. Allan.

@PaintHQ

4 ай бұрын

You’re very welcome my friend 🙏💚 ..Wow great news on the Ultra QuickShot 👏👏 I’m aiming for a video on Sunday morning that will cover some hints and tips (and when the time comes a pump replacement - obviously not for a long time) ..Great purchase Allan, it’s a wonderful unit, I’m excited for you.. any questions, always feel free to reach out 🙏 regards Pete

This was helpful. As I said in other comments… I primarily will be painting furniture. I think the 106 or 108 will be the perfect tip when painting stiles and rails on dressers and thinner legs on nightstands and end tables. I always feel like I’m wasting a lot of paint because my fan with is too large. I really think the Graco QUickShot is going to my most favorite. Sorry for blowing up your comments. I’m home sick and binge watching your channel. LOL

@PaintHQ

16 күн бұрын

No problem at all my friend, I appreciate all your feedback and thoughts on the videos 💙💯

Nice to see the channel growing, you was a great help when I was doing my self build, keep up the good work mate 👍

@PaintHQ

Жыл бұрын

You’re so kind, thank you for the support 🙏 ..happy to help anytime if I can 💙

Very helpful video Pete thank you very much for making these videos I really appreciate them very much and I use what I learn on your channel, at my work and for my clients, all the time. Thanks again. Please keep them coming.

@PaintHQ

Жыл бұрын

Hey Paul, thank you so much for the feedback and the kind words of support 🙏💙 regards Pete

Love your videos Pete. Very informative and entertaining. The lower tip size needing more pressure to eliminate tails always baffles me. My logic is smaller orifice, less pressure. Good lesson. Thanks

@PaintHQ

Ай бұрын

You’re so kind, really appreciate the feedback.. More pressure, especially with a .006” Vs .008” because you’re forcing paint particles / pigments through an orifice size approx half the size of a human hair 👍😄 Really appreciate the support, keep in touch.. regards Pete

I’ve been using the ff tips for a few years without a pressure gauge. I turn the airless up until the fingers disappear and then turn it up just a tad more to break the paint up a little more. I use the 208 on metal door jams.

@PaintHQ

7 ай бұрын

Thank you my friend 🙏 really appreciate you sharing your experience.. keep in touch.. regards Pete 💙💯

thanks Pete. great lil vid. Very helpful. I have the 106 and 110 so far.

@PaintHQ

Жыл бұрын

Hey buddy, thank you so much.. great stuff, hope you’re having plenty of spraying success my friend.. regards Pete

Great job Pete,the spindles look great sprayed no brushmaks on them etc,that's a high end finish right there 👍

@PaintHQ

Жыл бұрын

You’re a diamond, thank you Eddie 💙

Love the 106 for spindles thanks Pete 👌🏾 interesting video

@PaintHQ

Жыл бұрын

My brother 🇯🇲 ..thank you kind sir 💙

I'm excited to finally have 106 and 408 fflp tips!! Looks like it sprayed those spindles out nicely👍

@PaintHQ

Жыл бұрын

Hi Alex, yeah I was very impressed.. the reduced flow Vs an .008 gives you so much control 👍 ..great to hear from you buddy 🙏

Loved the review 👌

@PaintHQ

Ай бұрын

Thank you Pedro 🙏 regards Pete 💙💯

Hi Pete, great vids. Ive bought some of the paint you mentioned in your other video Akzo Nobel enamel top coat. Also bought some 206 and 208 FFLP Graci tips to try. I'll let you know how i get on as Ive got full house of skirts, arcs, doors and stairs to do. Fingers crossed ill get much less runs this time around. You are very kind with your time and advice answering questions for everyone. Keep up the good work.

@PaintHQ

5 ай бұрын

Hi Ben, great news - I wish you all the very best with your latest spraying venture 💙 ..Move relatively quick to begin with, as you get a feel of how the low viscosity product lays down.. then gauge how ‘slow’ you can move to produce the ultimate coat, that dries down beautifully smooth.. also, you will get some dust from the fine atomisation, use a microfibre cloth / vac between coats to remove any dust that could ‘interfere’ with the spraying 👍 good luck my friend, keep in touch 💙💯 regards Pete

Proper preparation, technique, and equipment settings are crucial for achieving the best results.

@PaintHQ

11 ай бұрын

Very true.. you’re very wise my friend 💯 - thanks for your input, keep in touch ..regards Pete

That music had me sitting on the edge of my seat.

@PaintHQ

7 ай бұрын

Haha 🙈 Thanks for watching and the feedback my friend 👍🙏 regards Pete

Now thats a job well done.

@PaintHQ

11 ай бұрын

Thank you buddy 💯

About time Graco it took em so long to bring the 06 . I was buying tritech tips only.

@PaintHQ

Жыл бұрын

I hear what you’re saying brother.. the introduction of the Graco FF LP 106 / 206 and the ability to spray at very low pressure is awesome 💙💯

كلما صغرت الفوهة يكون الطلاء اشبه بالبخار ومتماسك ويعطي نتائج رائعة شكراجزيلا لك

@PaintHQ

6 ай бұрын

👍👌👏💙💯

@sadsamr-un8rl

6 ай бұрын

@@PaintHQ 👋

First class

@PaintHQ

Жыл бұрын

Thank you so much, hope you’re keeping well my friend 💙

Hi Pete, going to be painting my own property soon using the sprayman GX21. Could you list the the masking paper, drop sheets, tape etc you use and also some affordable paint for walls ceilings and a satin based combo or system to go over oil based woodwork. I’ve watched a lot of your videos but I need a good solid list to go ahead and order off 🫨 it can get a little tricky to keep up. I hope you can provide this information and will be greatly appreciated 🫣🤞🏼 cheers and take care.

@PaintHQ

Жыл бұрын

Hello my friend, apologies for delay, I will always get back to you.. happy to help and advise if I can.. I recommend Kip masking products, if you search for “Kip Masking” in Amazon, you’ll see these products that I use.. -Kip Washi-Tec 238 Premium.. is the gold washi tape I use on fully cured surfaces, when spraying for super sharp lines.. Then this is the low tack / ‘purple’ sensitive Washi.. I use to mask walls when spraying the ceiling on the last day.. -Kip Washi-Tec 209 Kip Masking-Tec 3804 (48mm), I use for a cost effective crepe masking tape for non-critical lines.. Then the 2 main plastic film and papers I use.. -Kip Masking-Tec 232 Film (2.6m) -Kip Masking-Tec 234 Paper (30cm) Regarding woodwork.. I use a lot of these products for day to day internal joinery.. they are low viscosity, waterborne industrial 1K products.. spray very easily, no thinning at very low pressure ..being low viscosity, I use .008 tips.. so a 208 / 308... WP136 Water Based Primer / Edge Sealer holmanpaints.co.uk/interior-wood/171-akzo-nobel-WP136-highbuild-waterbased-primer-edge-sealer.html For the satin topcoat.. AkzoNobel Aqualit (Supercryl) Waterborne Enamel Topcoat holmanpaints.co.uk/interior-wood/169-akzo-nobel-aqualit-waterborne-enamel-topcoat.html ..you get a beautiful cabinet like satin finish ..and very cost effective, especially in 5 litre cans.. Comes in white, then if needing tinting both primer and top coat can be colour matched off any colour chart.. I’ve used Holmans for years, the Holmans team are all super helpful.. Can be delivered next day if required.. If this helps at all, Holmans have a 5% discount code, across all their range.. 👉 Use code PAINTHQ Keep in touch my friend.. regards Pete

Pete love the channel. I have two of the Ultra handhelds and use them every day. Question, if I were springs spindles and want to use Benjamin Moore advance and 106 tip how far would you thin out that product?

@PaintHQ

Жыл бұрын

Hi Brian, really appreciate your support and kind words 🙏 ..I fear BM Advance is a little too thick in paint viscosity terms for .006 tips - .006 such as the 106 suit low viscosity primers / top coats and clear lacquers (free flowing / spray only materials), whereas BM Advance is more thixotropic (can also be brushed / rolled) - typically you would use a .010, but BM are quality pigment paints - it may go through a .008 - I’d be inclined to recommend trying a 208 for spindles - a bit wider, but much more manageable.. I think you would get paint runs with a 108 🙈 Hope this makes sense and helps a little.. always feel free to reach out and I’ll do my best to help - let me know how you get on, regards Pete 💙

What tip would you use to spray dulux water based satinwood? I've just got the graco quick shot and we're painting architraves, door frames and doors, and using about 1.5 ltr of paint just on 1 door and frame 1 coat. Getting a few runs aswell

@PaintHQ

9 ай бұрын

Hello my friend.. you need to slow down the material flow by using a smaller orifice tip.. an .008 tip such as a 208 or 308 should work with your WB product.. which tip did you use, I’m guessing a larger orifice tip to spray the quantity of paint you mention .. moving much much quicker will also help not lay on as much 👍 Just little tweaks to your setup and technique.. you’ll get there my friend 💙💯 regards Pete

Pete , thanks for the video . Did any over spray go on the carpet?

@PaintHQ

Жыл бұрын

Appreciate you watching.. no, nothing on the carpet.. the carpet was protected using a fleece / plastic backed dust sheet and masked using Kip masking products 👍

Necestito una boquilla 106 para lacados 🙏🏽 estoy en España. Gracias 💯

@PaintHQ

Жыл бұрын

gracias amigo realmente aprecio que hayas visto el video... podrías usar este enlace para localizar un distribuidor en españa... mantente en contacto hermano, feliz de ayudar... saludos Pete www.graco.com/es/es/contractor/how-to-buy/where-to-buy.html

Question. I have a graco magnum prox19. It said that start at 1500 psi to 3000psi. So..if u are using 900 psi ..this mean i cant use this tips? Or there is something i am doing wrong?. I tried today. But i put 3/4 of the psi and worked. Then..is i put half..doesnt work well.. And in a 1/4 of pression kinda works.. I dont know really what i am doing. I mean. Which psi i should use my machine? Or i cant use it? Thanks

@Here-2-Learn

2 ай бұрын

In the video he adjusted the material keep practicing with the pressure after you’ve adjusted until you get the right spray pattern with no tails.

The tension in that video😂

@PaintHQ

5 ай бұрын

Haha 😂 sorry about that my friend 🙈 regards Pete

What about 206, 208 Tritech tips on cabinets painting?

@PaintHQ

Жыл бұрын

That's a very good question.. I have some experience testing a TriTech Ultra 208 Vs a Graco FF LP 208 and the Ultra required much higher pressure (above double if I recall).. Whereas the FF LP was at 900 psi.. with lower pressure you get less overspray, material waste and tip wear.. hope this helps my friend, regards Pete

Pete , beautiful work brother from another mother .dropping that glass man . Looked smoother than butter . I had 2 questions for you if you have the time to get back to me I’d really appreciate it . #1 ) you said you liked the reduced flow…… I know it’s pretty straight forward and everyone prob understood but I didn’t . Could you explain what you meant by that #2 ) you had stated in a video a while back that trimtech tips were not fine finish I believe correct me if I’m wrong . I know they have a tip labeled fine finish but I think you were saying they have to be sprayed at the normal pressure so are their “ fine finish “ tips not low pressures

@PaintHQ

Жыл бұрын

Ah my brother, appreciate the kind words, very much appreciated 🙏 ..good questions, it’s my goal to create informative videos for everyone to be able to understand.. flow rate refers to how much in litres or gallons is sprayed per minute (if spraying water).. it’s the 2nd part of the numbering on the tip that indicates this .. #06, #08, for example 106, 108 ..the orifice size ..so a 106 has ‘less flow’ will let out less paint Vs a 108 ..this is what’s also meant by ‘gaining control’ or ‘ultimate control’ ..you potentially will be able to move the gun slower using a 106 Vs a 108 ..less risk of a paint run ..However it’s important to note, the viscosity determines how small a tip orifice you can use.. so .06 and .08 tips are for low viscosity, very thin, free flowing paints (usually spray only).. thicker finishing paints that can also be used with a brush / roller usually suit a .10 or above 👍 Regarding TriTech Ultra Fine Finish, sure they are a fine finish tip producing fine atomisation.. they (by design) are not low pressure.. which is ok, I guess it’s down to preference in terms how you ‘like to spray’.. I’ve previously done a test using 208 tips and if I recall Graco FFLP tips were half the pressure (900 psi) spraying low viscosity waterborne material.. so Graco releasing new 106 and 206 (and 408) sizes, is pretty awesome if you’re a fan of low pressure spraying 💙 ..hope this helps my friend, always feel free to reach out, I’m happy to try and help.. sorry about the essay 😆 ..regards Pete

Hi, can you recommend primer/undercoat for spraying with 310 tip please. My tip always block with 310 every 5min

@Staky-wl4bk

2 ай бұрын

I spray new build house's using 517 blue for emulsion with no issues. As soon as I switch to spray acrylic uc primmer with the 310 it's absolutely useless constantly blocking or jamming.Nobody seems to have a solution

@PaintHQ

2 ай бұрын

@Staky-wl4bk Check your manifold and gun filter, make sure they’re clean and if not already switch to the blue 100 mesh filters.. then it could be the material, it may not spray well - you could try a 312.. but gift of all check your filters and use a blue 100 mesh when spraying trim / woodwork.. let me know how it goes 🙏 regards Pete

@Staky-wl4bk

2 ай бұрын

​@@PaintHQthanks for the reply I use the blue filter in the gun and black in the machine (Graco 395) I use the 312 fflp as I know it works but prefer the 310 finish. It definitely is the material as any Dulux acrylic really struggles yet crown is better

Sure I have a 106 buddy but have never used it may give it a try with the Akzo Nobel 👍🏻

@PaintHQ

Жыл бұрын

Hey Simon.. sprays beautifully my friend, let me know how you get on my friend 💙

@MEVD2011

Жыл бұрын

@@PaintHQ learning all the time buddy the fact the data sheet for Dulux satin Wood recommended a 6.16 tip was a real eye 👁️ opener used a 5.15 thinned it by 20% and got good results just as well they where panels any detail work with a 5.15 May have caused an issue or two 😂

@PaintHQ

Жыл бұрын

Thanks for sharing brother, you’re a diamond 👏👏👏

Hola Pete. Qué grata sorpresa el leerte en español. 2 puntos: Ya probaste las LP Amarillas? Has colocado el manómetro entre la manguera y la pistola, para ver si la lectura de PSI es diferente? La lectura de PSI debe de ser más real en esa posición. Como siempre, un gran video de tu gran trabajo. Best regards, Brother. Enrique.

@PaintHQ

Жыл бұрын

hola hermano, siempre es bueno saber de ti, Enrique. Todavía no he probado los consejos de Neon LP, debería poder mostrar algunos en el canal pronto. puntas LP verdes, es solo el cambio de color y una numeración más clara para mostrar una diferencia entre las puntas LP y FFLP verdes 👍... buen punto sobre la ubicación del manómetro, no, no lo he probado, tendré que intentarlo... gracias por compartir la información, eres un diamante.. cuídate amigo.. saludos Pete 💙

@EnriqueJavierRodzRodz

Жыл бұрын

@@PaintHQ Hola Hermano. Estaré al pendiente de tu vídeo sobre el cambio de posición del manómetro. Te mando un abrazo.

thank

@PaintHQ

Жыл бұрын

You’re very welcome kind sir 💙

Hello, is that a graco whip hose? Do you know the size. Thanks

@PaintHQ

Жыл бұрын

hello my friend, it's a 1/8" 1.4m whip.. I believe it's the smallest size whip hose on the market 💙 regards Pete

@xxnonstopdancingxx

Жыл бұрын

@@PaintHQ Thank you Pete, it looks like what I'm after

@PaintHQ

Жыл бұрын

You’re very welcome.. it’ll be great to hear how you get on 👍 regards Pete

Are u using acrylic latex or oil base? Great video😊

@PaintHQ

7 ай бұрын

Thank you my friend 🙏 It’s an acrylic base.. a fast drying 1K industrial waterborne primer by AkzoNobel 👍 Thanks for the support buddy.. regards Pete

Hello guys this week mt graco coming i just want to ask u i am furniture maker ussaily tv unit wardrobw and kitchen which tips number its best for cabinets and cupboards i am new in airless thx

@PaintHQ

3 ай бұрын

Great to hear from you buddy.. depending on paint viscosity, I’d look to use a FFLP 208 / 308 👍 You have a reduced flow Vs a 310 and will gain more control.. a 310 (again depending on viscosity) could lay down too much material.. I tend to use a FFLP 208 or 308 in almost all cases 👍 Regards Pete

@yavuzhocaoglu8568

2 ай бұрын

@@PaintHQ thx mate u helpfully

@PaintHQ

2 ай бұрын

@yavuzhocaoglu8568 🙏💙💯

Do you think Kip masking products are good enough to go for? Cheers

@a31817

Жыл бұрын

And what about 206, 208 Tritech tips?

@PaintHQ

Жыл бұрын

Hello my friend.. Kip use innovative Washi technology in their professional range of masking tapes, the parent company Shurtape (the company behind FrogTape) only make tape for themselves, Kip is a product range I most definitely recommend 🔴💯

@PaintHQ

Жыл бұрын

That's a very good question.. I have some experience testing a TriTech Ultra 208 Vs a Graco FF LP 208 and the Ultra required much higher pressure (above double if I recall).. Whereas the FF LP was at 900 psi.. with lower pressure you get less overspray, material waste and tip wear.. hope this helps my friend, regards Pete

@a31817

Жыл бұрын

@@PaintHQ Thank you, didn’t know that, usually I am using Ciret products and have not been disappointed with. I’m talking about sensitive range of tapes when crispy lines are desired. Cheers

@PaintHQ

Жыл бұрын

Sure, here’s the 2 main tapes I use.. this is the premium ‘gold’ Washi for fully cured surfaces.. I use to mask woodwork and trim, when spraying the walls.. Kip Washi-Tec 238 Premium www.amazon.co.uk/Kip-Painters-Decorating-Wallpaper-Sensitive/dp/B09HV9HHQG/ref=mp_s_a_1_6?keywords=kip%2Bmasking&qid=1668888729&sr=8-6&th=1&psc=1 And this is the low tack / sensitive Washi.. I use to mask walls when spraying the ceiling in on the last day.. Kip Washi-Tec 209 Wallpaper www.amazon.co.uk/Kip-Painters-Decorating-Wallpaper-Sensitive/dp/B06XKKZ4GY/ref=mp_s_a_1_6?keywords=kip%2Bmasking&qid=1668888729&sr=8-6&th=1&psc=1

Hi there. I bought a 110 tip, but I am scared to use it because of the flow rate. Could you suggest when a 110 might be suitable?

@MEVD2011

10 ай бұрын

I brought one a few years ago but there next to useless my friend to much paint flow you would have to move so fast not to get runs you would loose all control I found a lovely place for mind at the back of the shed and to the best of my knowledge it’s still there give the 1.06 a go 👍🏻

@BK-gc1jm

7 ай бұрын

I use a 210. For 2 inch door trim..with cardboard behind to catch over spray

@PaintHQ

7 ай бұрын

@BK-gc1jm Thanks for sharing, great input buddy.. regards Pete 💙💯

Are u in the USA.whwre are u buying it paint SW or BM

@PaintHQ

7 ай бұрын

Hey buddy.. I’m in the UK.. I do appreciate and admire the coatings industry in the US, the products and availability is vast 👏👏👏🇺🇸❤️

How can China buy your products?

Hay quá bạn ơi.bao nhiêu tiền một bộ

What paint were you spraying on the bannister and spindles?

@PaintHQ

Жыл бұрын

It’s the AkzoNobel products that I’m a fan of my friend 👍

@arinb12

Жыл бұрын

@@PaintHQ thanks! Which one specifically for the most durability?

@arinb12

11 ай бұрын

I'm after something that can even be painted on the treads?

Or use a 310 get it done in a few minutes

👑🏅 🇩🇿🤝

@PaintHQ

Жыл бұрын

🇩🇿❤️💯

Too much of that and you'll wind up a spindlester!

@PaintHQ

4 ай бұрын

😄🙈

🫡

@PaintHQ

Жыл бұрын

💙🙏👍