Excellent video Brandon, I'm looking forward to part II.
@nickpersenaire44435 ай бұрын
Thanks for sharing another great episode Brandon keep up the great work.
@jimmackey29095 ай бұрын
Quite a complex little piece. Always wondered how it worked. Thank you!
@garymessina16095 ай бұрын
A little messy but great video thanks Brandon
@scrotiemcboogerballs19815 ай бұрын
Thanks for sharing
@brittblanton83425 ай бұрын
Great video Brandon I felt for you when you were under it. Personally I like Red Wing work boots they are American made and I have had really good luck with them. Take care guys and have a great weekend 👍
@yenerm1145 ай бұрын
👌🏼🤘🏼🤘🏼 did that like a pro
@turner5935 ай бұрын
Brandon new subscriber here and wanna be an operator one day, found this video very informative and helpful in understanding differences between Swing motor and Rotary manifold , thanks for a great video !
@42pierce5 ай бұрын
T. Allens is good stuff!
@wademizelle34335 ай бұрын
I did enjoy it. Can’t wait for part 2. Great, great videos, thanks and keep filming the repairs.
@ianmckay17805 ай бұрын
Nice to see you getting your hands dirty once again. Brings back memories of when I used to crawl under whatever to sort out a problem. Thanks. Look forward to the next, cleaner episode.
@DT-mc8rb5 ай бұрын
Good morning.
@casycasy51995 ай бұрын
nice job so far
@alanbierhoff68315 ай бұрын
What’s that saying? If you don’t schedule maintenance for your equipment, your equipment will schedule the maintenance for you 😂
@rongrose37465 ай бұрын
That is a JOB
@matthewdavis40815 ай бұрын
Service truck setup right is worth its weight in gold. Finally got mine just they way I wanted it. And I have no idea how I ever got any thing done before it. Great video
@paweisyn74465 ай бұрын
👍👍👍
@artillerest43rdva75 ай бұрын
neat water can cause a tone of damage as it freezes and thaws. where that large drive gear with all the lubricant , is that contaminated with water? do you have to empty and fill it again with fresh oil ? to stop the oil from coming down your arm, take a blue shop towel and wrap it around your tie it at your wrist, that will prevent it from rolling down your arm, at worse it will drop off the towels location. old oil stinks so bad ! especially old 90 w gear oil! take care, be safe and stay healthy!
@jacobbuckley82325 ай бұрын
Whats the style name of those boots? Looked on brunts website and didnt see that style.
@daltonmortenson58135 ай бұрын
Great video first off but what kind of pants are you wearing by chance? I’m looking for better ones than I currently have for work. Any good recommendations?
@user-et9xv7gk5u5 ай бұрын
What is the alternative or similar to the swing Motor Hydraulic?
@peteschiavoni5 ай бұрын
I love my Brunt boots. 6” Marin is the model I have. They are holding up well so far and very comfortable. That’s quite the messy job y’all got going on.
@Bill-xc8le5 ай бұрын
Other youtubers wear them because they cost free 99.
@alanbierhoff6831
5 ай бұрын
I wear free .99 Ariat boots. I’ll wear Brunt when they send me a pair lol
@Bill-xc8le
5 ай бұрын
@@alanbierhoff6831 Thats exactly where I was going with it.
@ronaldheit1965 ай бұрын
Definitely messier that changing an extremely gunked up tail rotor transmission on a Coast Guard Sikorski HH52a Seaguard amphibious helo. I changed a couple of those and it always seemed they were covered in all kinds of crap including Aviation mil spec grease other AD'S hadn't cleaned good enough. Definitely looking forward to an episode 2 on this job. Thanks for the early Saturday afternoon entertainment Sir.
@jeffreykerr80345 ай бұрын
Harbor Freight has a great set of long Allen sockets that work great for your application on those hydraulic fittings. I've been working in hydraulics for over 25 years
Пікірлер: 28
Excellent video Brandon, I'm looking forward to part II.
Thanks for sharing another great episode Brandon keep up the great work.
Quite a complex little piece. Always wondered how it worked. Thank you!
A little messy but great video thanks Brandon
Thanks for sharing
Great video Brandon I felt for you when you were under it. Personally I like Red Wing work boots they are American made and I have had really good luck with them. Take care guys and have a great weekend 👍
👌🏼🤘🏼🤘🏼 did that like a pro
Brandon new subscriber here and wanna be an operator one day, found this video very informative and helpful in understanding differences between Swing motor and Rotary manifold , thanks for a great video !
T. Allens is good stuff!
I did enjoy it. Can’t wait for part 2. Great, great videos, thanks and keep filming the repairs.
Nice to see you getting your hands dirty once again. Brings back memories of when I used to crawl under whatever to sort out a problem. Thanks. Look forward to the next, cleaner episode.
Good morning.
nice job so far
What’s that saying? If you don’t schedule maintenance for your equipment, your equipment will schedule the maintenance for you 😂
That is a JOB
Service truck setup right is worth its weight in gold. Finally got mine just they way I wanted it. And I have no idea how I ever got any thing done before it. Great video
👍👍👍
neat water can cause a tone of damage as it freezes and thaws. where that large drive gear with all the lubricant , is that contaminated with water? do you have to empty and fill it again with fresh oil ? to stop the oil from coming down your arm, take a blue shop towel and wrap it around your tie it at your wrist, that will prevent it from rolling down your arm, at worse it will drop off the towels location. old oil stinks so bad ! especially old 90 w gear oil! take care, be safe and stay healthy!
Whats the style name of those boots? Looked on brunts website and didnt see that style.
Great video first off but what kind of pants are you wearing by chance? I’m looking for better ones than I currently have for work. Any good recommendations?
What is the alternative or similar to the swing Motor Hydraulic?
I love my Brunt boots. 6” Marin is the model I have. They are holding up well so far and very comfortable. That’s quite the messy job y’all got going on.
Other youtubers wear them because they cost free 99.
@alanbierhoff6831
5 ай бұрын
I wear free .99 Ariat boots. I’ll wear Brunt when they send me a pair lol
@Bill-xc8le
5 ай бұрын
@@alanbierhoff6831 Thats exactly where I was going with it.
Definitely messier that changing an extremely gunked up tail rotor transmission on a Coast Guard Sikorski HH52a Seaguard amphibious helo. I changed a couple of those and it always seemed they were covered in all kinds of crap including Aviation mil spec grease other AD'S hadn't cleaned good enough. Definitely looking forward to an episode 2 on this job. Thanks for the early Saturday afternoon entertainment Sir.
Harbor Freight has a great set of long Allen sockets that work great for your application on those hydraulic fittings. I've been working in hydraulics for over 25 years