Evo 8 FULL RESTORATION and 800HP Build Is Just Too Clean To Drive
Автокөліктер мен көлік құралдары
It's not every day you find a RARE 2003 Lancer Evolution with less than 50,000 miles on it. Even less likely in the color Lightning Yellow, and even more unlikely than that, one that hasn't been thrashed and needs a new transfer case. But that's precisely what happened when our producer Jarred decided it was Evo'clock and was ready to give in to the HDWerks process.
In Part 1 of this episode, Pete takes us through the entire process of restoring, building, and making this 2003 Lightning Yellow Lancer Evolution 8road ready. That includes sourcing the car from the get-go to inspection, teardown, paint restoration, parts lists, fabrication, welding, mounting, cryo blasting, testing, replacing, and rewiring every inch of this cult classic. By the time Pete was done, one thing was for sure. This car is just too damn clean to drive... BUT WE GONNA DO IT ANYWAY.
You'll also see Pete teaming up with the renowned Chris Carbee to tune this 800hp capable beast at @SFL_Dyno. You can check out his Instagram here: / slowpoke_r8
Included in this build as usual is a treasure trove of parts from companies like Artec (Manifold), Haltech (Elite 1500), as well as Platinum Racing Products (Billet Rocker Cover), who we have a discount code for here: bit.ly/HDWERKSXPRP)
🔰 Like and Subscribe for more, or visit us at:
/ hdwerks
www.hdwerks.net
To jump through the different sections of his build process, click the chapter markers below:
00:00 Prelude
01:27 The sourcing process for the Lancer Evolution
02:45 Paint, Front and Rear Bumpers, Lip, Wing, and Grills Restoration
04:06 Original Setup vs. New Build Goals (Restoring Air Conditioning)
04:50 Garrett G35-1050 Reverse Rotation Turbo + Artec V-Band Exhaust Manifold
05:16 Fathouse Evo 8/9 Race Engine Oil Catch Can Relocation
05:38 Upper and Lower Intercooler Piping Setup
06:08 Mini Battery and Engine Harness Re-looming
06:33 Oil Pressure Sensor, Oil Pan Removal, and Pickup Tube Assessment
06:51 Haltech and Fuel System Re-installation
07:48 New Injectors
08:08 Evo Brake System and Wheel Replacement (DBA Rotors + Wedsport TC105n)
08:57 Phase 1 Complete with undercarriage Cryo Blasting/Restoration
09:57 Stainless V-Band to Titanium V-Band Exhaust Fabrication and Installation
11:37 Haltech Keypad and Configuration + Exhaust Manifold EGT Bungs
11:57 FIRST DRIVE 😈
13:00 Platinum Racing Products Evo 8 Billet Cam Cover Installation
13:45 New Coil Packs and Skunk 2 Throttle Body and Intake Manifold Installation
14:13 DYNO DAY
16:30 Dyno Sheet +Power Numbers
18:22 The True Reality of Car Building
#evo8 #lancerevolution #800hp #jdm #hdwerks
Пікірлер: 81
Now this is the kind of content I love to see showing the hood the bad and the ugly!!!Despite what happened at the end this was such an enjoyable video to watch from the beginning to the end!!!I can’t wait till version 2.0 comes out better and stronger 💛!Keep up these 🔥 ass builds!!!
@hdwerks
10 ай бұрын
Thank you so much. That’s exactly What we wanted to show. No one talks about the bs and struggle of car building. It’s just the flash and glam and look at me. The real builders have no apprehension to show the whole story. Not just the fluff. Thanks for your support. Share share share.
@Justin-bz1dp
4 ай бұрын
Hi wat is dune to 5he car
So y’all know I’m a big domestic GM builder. This content is so good- and Pete and his team are so talented that I would actually consider buying an Evo and have them do their thing to it- never thought I would say that. Kudos guys great work as always.
@hdwerks
10 ай бұрын
Thanks man. If I want to get myself to the dark side you know you’ll be getting a call. Thanks for watching man
I see Carbee .. Working magic 💪🏾
@hdwerks
9 ай бұрын
Yep
@semtex50
9 ай бұрын
@@hdwerks Great build! Keep at it. 💪🏾
Fantastic content. Evooooooo! ❤
@hdwerks
11 күн бұрын
Yay, thank you!
Beautiful build. I want to dry ice my Evo now! It will be back stronger and better I'm sure 👍🏼
@hdwerks
10 ай бұрын
Thanks buddy! Will be crazy
It’s how much stress you can take dude that’s the fun of the game
I remember building my Evo 8 for 2 months, waiting for the Ams to send me the bottom end of my 2.3L and within in 2 days the oil pump failed and thru the crankshaft. If I'm not mistaken Chris knows the guy Brandon from Jacksonville who helped me out with the build
@hdwerks
10 ай бұрын
Gotcha. Thanks for watching !
Interesting and informative 🇯🇲 💯 🍾
@hdwerks
11 күн бұрын
💯
Great video guys! I had a similar situation where I bought a used evo 8 with a "built" motor, spent money on parts and fab work, waited months to finish it all only to end up with a spun rod bearing and scored cylinder walls. Had to start fresh with a new motor, but now everything is done short of body work and interior (working on that at the moment). Keep at it though, it'll be worth it in the end!
@hdwerks
8 ай бұрын
ThBks brother. We’ll get it. Motor is almost done and we’re gearing up for round 2 gonna be sick. Thanks for watching 🫶
@TheToyz
8 ай бұрын
@hdwerks Awesome! Can't wait to see it! 👊🏼
Looking forward to the build
@hdwerks
10 ай бұрын
Soon!! Thanks for watching!
Solid video. Ending is hard to watch (been there), but that's just how it goes with performance cars. Keep up the good work, Pete!
@hdwerks
10 ай бұрын
Thanks for the continued support. We’re capturing your build now
Just came across your channel. Really well put together. Had an Evo 6 RS, always wanted an 8 though.
@hdwerks
6 ай бұрын
Thanks for watching. More to come !
Mann the Yellow is by far my favorite color in the Evo's. I wish I could get one without having to sell a kidney these days.
@hdwerks
10 ай бұрын
They’re so hard to find man. We lucked out with this chassis.
Amazing job on that car. Loved this video, tons of information and cool stuff but not to drawn out! Can't wait to see how it does with the new engine.
@hdwerks
10 ай бұрын
Thanks e-dod. More to come. Appreciate you watching
@hdwerks
10 ай бұрын
Thanks so much man. Appreciate it.
Looking forward to this build. You have a new subscriber Evo💛🏁
@hdwerks
10 ай бұрын
Thanks for the sub DJ ✊
@hdwerks
10 ай бұрын
Thanks bro!
Luv this video!!! Great explanations of the different stages of modifying the EVO!!!!
@hdwerks
10 ай бұрын
It’s not always pretty but we always preserve. Share share share
Waited all week for the video. It definitely did not disappoint.🔥
@hdwerks
10 ай бұрын
Thanks so much !
Super content, I'm sure the Evo will be amazing in the end. Will subscribe 👍
@hdwerks
9 ай бұрын
Thanks so much. Can’t wait to do the second episode. Appreciate the follow
Great video with great content, would love to know the specifics for the build and how you guys going to build it. Definetly looking forward to watch part 2 :)
@hdwerks
10 ай бұрын
Thanks Man! So we’re going to start doing part 2 soon. Waiting on some Parts to come in and we will Get to filming. Gonna be cool!
I know exactly what you mean..i was upset 😡 when my evo kept giving me issues but once it was right it was fun🎉
@hdwerks
3 ай бұрын
It’s part of the process
Will you all be making a video on the tear down of the current motor?
@hdwerks
10 ай бұрын
Yep we have that already filmed
Nice video. Bummer the engine broke . If a 94mm crank is in the budget it just makes everything better on these cars.
@hdwerks
10 ай бұрын
Yep. We have a nice build in mind. We’ll keep you updated. All good tho. It’s part of it.
Sick build! Wish I knew how much some of those services cost, bc my poor worn out IX needs some TLC...
@hdwerks
11 күн бұрын
Email us
When converting the throttle body over to the skunkworks TB if you deleted the IAC or still running the factory IAC unit wirh the Haltech? Also, when relocating the catchcan set up super low does that create any vacuum pull or flow issues?
@hdwerks
10 ай бұрын
We still use the Iac no problem. We never delete the Iac. Never had any issues down low like that. We sometimes use a trans mounted can with the same success.
I have an sr 20 vet that has me loosing my mind, I paused the project but I'm restarting soon.
What a build. Someone know what's this speedometer ?
@hdwerks
4 ай бұрын
Haltech IC7
great vid! Do you recommend the Artec manifolds? Any comments on what sets them apart from other options?
@hdwerks
5 ай бұрын
Hey there. Yeah. We love the Artec product for many reasons but we love it for the simplicity and spool. Sometimes there’s a lot lost with tubular style manifolds. This model i would say is great for street + builds. They also make a bigger vband for larger frame turbos which flows even more. My favorite offering is the stock frame twin scroll manifold and complimentary 02 housing / 3.5 downpipe. Makena huge difference on stock frame turbos and keeps the classic evo tone. Grab them off PRP with our discount code for now. We will Offer them in the future on our site. -p
This thing is perfect what are the specs on the wedsports?
@hdwerks
6 ай бұрын
Thanks man. I thought so also. They’re 17x9.5 if I remember. It’s been a minute. My absolute favorite wheel on an evo. These are the original tc105 not the new x version
What's the ball park price to restore the paint for the lightning yellow evo?
@hdwerks
9 ай бұрын
Jjst really depends on the situation. Most cars need an overall restore top to bottom. We take them all the way apart and restore like oem. That’s the best results. If the car is good we can pick and choose. A la carte it. That’s usually not the situation tho.
What ID injectors are you guys running?
@hdwerks
9 ай бұрын
2150 for now. Will most likely do ID2600
Do you guys sell that exhaust system?
@hdwerks
10 ай бұрын
They’re hand made. I can make you something similar. We may start doing small Runs of our titanium line and GTR line. Thing sounds incredible
@BaoTran-jk8uj
10 ай бұрын
@@hdwerks how much would something like that cost?
🔥🔥🔥
@hdwerks
10 ай бұрын
👊
Dạo này có gì mới không?
@hdwerks
7 ай бұрын
Episode 2 is coming soon
💯💯💯💯💯💯💯💯💯💯💯💯💯💯
@hdwerks
10 ай бұрын
👊
So how much does jared want for it?
@hdwerks
9 ай бұрын
Ha. Not quite yet. Maybe once it’s done
@EricTsu
9 ай бұрын
@@hdwerks haha let me know, its mine! 😂
Must hav cost a bag of $$$$$ for all that work smh
@hdwerks
9 ай бұрын
🤷🏽 we’re fair. These cars are gems and need proper investment to restore them. Always options for all levels of restoration.
👍🇵🇭💯💥👌💪
'Promo SM'
Mad respect to you guys @HDWERKS #EVOHEAVEN #Allin1Shop #PaintMechanicalElectricalFabwork
@hdwerks
10 ай бұрын
Thanks so much!!!!!! We love building.