EVERYTHING NEEDED FOR A K-SERIES SWAP!

Автокөліктер мен көлік құралдары

Hello hope you guys are doing well! In today's video I try my best to show you guys everything you need in order to k swap your 96-00 Honda Civic! I know I might've missed a few things so if you have any questions just comment below!
MERCHANDISE HERE:
brokeboyszn.bigcartel.com
FOLLOW BROKE BOYS ON IG @BROKEBOYSZN
MUSIC:
/ homagebeats

Пікірлер: 122

  • @strawberrymochiiz
    @strawberrymochiiz Жыл бұрын

    Very helpful video. I was big into b-series swaps back in the early 2000 but got out of the seen years ago. I’m thinking about getting back in and I’m lost lol. Much appreciated.

  • @angelreinaldoacevedoreyes7758
    @angelreinaldoacevedoreyes77582 жыл бұрын

    Keep it up brother !!! Bless for you and your channel always!!! Keep it up with the content , great channel been following this build for while since it was d series to now k swapped!!!

  • @mikelmorgan6409
    @mikelmorgan6409 Жыл бұрын

    You can use a accord k24 tb if you keep the rbb intake manifold. No adapter needed. 10 bux at the junkyard

  • @thakiddj
    @thakiddj2 жыл бұрын

    Yesss let’s go bro love the content always ❤️🙏🏽🤙🏽 Ps the s2k still lookin like a snack 😘 Appreciate the vid bro the b series vid really helped me when I was doing my b swap ❤️

  • @austintopchi7764
    @austintopchi77643 ай бұрын

    Thanks for this bro 💯🤘🏽finishing up my homies em1 this month this helped out with some things I wasn’t sure on !

  • @carsinruin6102
    @carsinruin6102 Жыл бұрын

    RBC manifolds are great for the dyno and 7k+ rpm but the RBB makes better midrange from 2-6.5k rpm.

  • @goldentrucker7921
    @goldentrucker7921 Жыл бұрын

    I got a quote for $2500.00 . To drop a shell off & and all parts to the shop. That includes a tune. Fair deal ? What you think?

  • @lekendrick67

    @lekendrick67

    Жыл бұрын

    Where???

  • @goldentrucker7921

    @goldentrucker7921

    Жыл бұрын

    @Lekendrick Thomas I believe is was Rolo tuning in Harrisburg PA. I went a different route, and bought a new mustang gt.

  • @lekendrick67

    @lekendrick67

    Жыл бұрын

    @@goldentrucker7921 I can respect that. I’m trying to find somewhere to get my Honda built.

  • @goldentrucker7921

    @goldentrucker7921

    Жыл бұрын

    @Lekendrick Thomas not sure where you're located. But pennsylvania & new jersey have a lot of shops that'll do them. Looking at $2500 to $4k in labor from what I've researched . Then tune is extra $

  • @lekendrick67

    @lekendrick67

    Жыл бұрын

    @@goldentrucker7921 I’m located in Memphis TN. I don’t feel labor is a problem. It’s more so of parts I’m concerned about.

  • @suathao9215
    @suathao92152 жыл бұрын

    Great video, yes please do a video of cost estimate on your swap along with any additional costs on upgrades!

  • @Jeremy_Hill_2020
    @Jeremy_Hill_20202 жыл бұрын

    So much room for a turbo back there 👀

  • @203dyl
    @203dyl Жыл бұрын

    Can you drop the parts list and links to everything? I wanna follow your build

  • @cvstaway7218
    @cvstaway72182 жыл бұрын

    ur paint is so clean i like it

  • @maroonsr20
    @maroonsr209 ай бұрын

    Could you just move the shifter tower further back? Is there enough slack in the cables?

  • @egmarkoz
    @egmarkoz2 жыл бұрын

    Did my k24 hatch about maybe a year ago ,doing my integra next week

  • @davidzen7971
    @davidzen79712 жыл бұрын

    Shout out from San Diego!!

  • @Yoitsedgar
    @Yoitsedgar2 жыл бұрын

    For the Speedo you have to switch the pinouts of the harness that plugs up to the speed sensor

  • @brandonrosales9254

    @brandonrosales9254

    Жыл бұрын

    Switch out the pin outs how ?

  • @daqfr
    @daqfr Жыл бұрын

    I can’t get much mounts here in South Africa, either they’re too expensive or unavailable. Could a k swap be done with fabricated mounts?

  • @justinmartinez1645
    @justinmartinez16452 жыл бұрын

    Wassup man remember me😎🤙✅ OG fan 👍👍👍👍🤝

  • @codysmith5905
    @codysmith59057 ай бұрын

    Nice work bro

  • @michaelchavez2110
    @michaelchavez21102 жыл бұрын

    Eibach 2022 is gonna be lit

  • @Piercemxpx
    @Piercemxpx2 жыл бұрын

    I have a 2001 civic ex. Is this gen still easy to kswap? I already purchased a 6 speed rsx type s manual trans (x2m5). Looking for a k20a2 currently

  • @DRILLTRAINEE
    @DRILLTRAINEE2 жыл бұрын

    yes bro u gotta make a cost vid

  • @brianjz300
    @brianjz3002 жыл бұрын

    Perfect swap

  • @jabezhalligan3426
    @jabezhalligan34262 жыл бұрын

    Yeah the water pump housing at 7:00 is because it’s a JDM version you can take it off and replace it with a USDM pump housing. If your alternator goes out with that housing on it you might be fucked since the USDM alternators different than the JDM.

  • @Moheezy
    @Moheezy2 жыл бұрын

    Did you buy your kit from ktuned? I have a 00’ civic I’m trying to k swap in the next couple years

  • @randygonzalez9425
    @randygonzalez94259 ай бұрын

    How you wire up conversion harness to ecu can you make a video?

  • @562frankrivers2
    @562frankrivers2 Жыл бұрын

    Maxspeedingrods has a shifter that looks just like the k tuned shifter but for way less

  • @bseries8826
    @bseries88262 жыл бұрын

    🔥🔥🔥

  • @Piercemxpx
    @Piercemxpx2 жыл бұрын

    One thing to note, you said the K series have immobilizers, but I’m pretty sure that’s actually just the k24 where you have to worry about that. If you get a k20a2 from an 02-04 rsx type s, you can use a PRC ecu & there is no immobilizer.

  • @naseemtuanpituk830

    @naseemtuanpituk830

    Жыл бұрын

    Why not standalone ecu ?😅😅

  • @Almostboosted
    @Almostboosted2 жыл бұрын

    How come you don't use kpro to control the radiator fan?

  • @ethanbischoff7539
    @ethanbischoff75392 жыл бұрын

    The vss Frequency is adjustable through hondata

  • @saladbowl831
    @saladbowl8312 жыл бұрын

    If your transmission has a b series style speed sensor in the rear of the transmission all I think you need is a good oem sensor. Cause I’m running the same transmission in my eg and at first I thought I needed a converter but in reality I just needed a good oem sensor and my tac started working perfectly

  • @darksilver2919
    @darksilver29193 ай бұрын

    Question, can I use the ek brake booster but just get fittings for my k series so it can adapt and go to that?

  • @ronaldwashanta2963
    @ronaldwashanta29632 жыл бұрын

    Where did you get the swap kit from bro

  • @brayancastro3405
    @brayancastro3405 Жыл бұрын

    You got a link to your engine harness?

  • @juandoe1827
    @juandoe18272 жыл бұрын

    Animo compa

  • @victorsabala2108
    @victorsabala21085 ай бұрын

    11-15 Honda civic SI for the RBC intake manifold and come with a k24Z7

  • @TheNDex
    @TheNDex Жыл бұрын

    How much did this build cost for you?

  • @rylow9342
    @rylow93429 ай бұрын

    Can you put a k24 out of an accord with engine, trans, ecu , and engine harness all from same car an put it in a 99 civic and then get the conversion harness that goes from the ecu to the drivers side dash ? Or will there still be an issue with the stock ecu ??

  • @astn.07

    @astn.07

    23 күн бұрын

    As long as you have the right ecu for the engine and the conversion kit the chassis look should work. Not sure if that answers your question but

  • @delaisa.12
    @delaisa.12 Жыл бұрын

    How do you make the head lights work?

  • @lucascamposs5080
    @lucascamposs508022 сағат бұрын

    HOW DID YOU ADAPT THE CENTER FRAME OF THE NEWEST CIVIC RADIO?

  • @fijitears
    @fijitearsАй бұрын

    ♨️♨️♨️💪🏽💪🏽💪🏽

  • @Josh_Playzzz
    @Josh_Playzzz Жыл бұрын

    Will the immobilizer bypass work for any k series ecu

  • @mikelmorgan6409
    @mikelmorgan6409 Жыл бұрын

    If you have kpro v4 you can change the setting in your kpro to read the transmission speed sensor correctly. No need for a conversion harness

  • @pelonwey2436
    @pelonwey2436 Жыл бұрын

    You should’ve put links in the description for the parts you bought to make the k swap

  • @vqgav7680
    @vqgav76802 ай бұрын

    you said conversion harness can you use stock ecu

  • @jacobgardner7560
    @jacobgardner7560 Жыл бұрын

    What front bumper are you running?

  • @adrianvazquez3070
    @adrianvazquez30702 жыл бұрын

    Do a total cost video

  • @brezzy350z
    @brezzy350z Жыл бұрын

    How much did you end up spending ? On full K swap with out motor & trans ?

  • @jorgeperez591

    @jorgeperez591

    Жыл бұрын

    People tell me 8-12k stock no mods

  • @bryangarcia1150
    @bryangarcia11502 жыл бұрын

    YESSIRSKI

  • @jorgeperez591
    @jorgeperez591 Жыл бұрын

    I have a 99 Honda Civic that I want to do a kswap And I also got a 05 Acura type s the entire car does anybody know if it would have everything that I would need to do a kswap first time trying to do a swap any fee back will help thanks

  • @jiggysince93
    @jiggysince932 жыл бұрын

    What about the fuse box?

  • @scottmerritt2676
    @scottmerritt2676 Жыл бұрын

    What type of axles do you have?

  • @emanuelcoronado2977
    @emanuelcoronado29772 жыл бұрын

    Hey bro is your engine a rbb 3 ?

  • @dirkdig3628
    @dirkdig36285 ай бұрын

    It’s 2024 and these boys still rocking a stock accord intake manifold lol smh living up the channels name

  • @BrokeBoyAndy

    @BrokeBoyAndy

    5 ай бұрын

    It was a hybrid racing intake lol

  • @fijitears
    @fijitearsАй бұрын

    Is thst your old blue coupe?

  • @CharmleysChopShop
    @CharmleysChopShop Жыл бұрын

    Sedan would be the same?

  • @219Fishing
    @219Fishing Жыл бұрын

    Do you need an eg subframe??? And what kind of wire harness?

  • @nlsdrf1290

    @nlsdrf1290

    Жыл бұрын

    You don’t need an eg subframe he says it in the video I think. But using an eg subframe is better due to weight

  • @shakiejake
    @shakiejake Жыл бұрын

    So custom axles ?

  • @Victor-tm2kl
    @Victor-tm2kl9 ай бұрын

    Do you have a link for your eBay harness? And are you having any issues with it ?

  • @edwinaquino9291

    @edwinaquino9291

    7 ай бұрын

    Do you have the link for harness

  • @bobbyhill6785
    @bobbyhill6785 Жыл бұрын

    Is my 99 dx coupe considered an ek? Sorry I’m new to this Honda world and I’m tryna k-swap my car but I’m tryna figure out parts and things of that nature

  • @johnathanacosta8119

    @johnathanacosta8119

    Жыл бұрын

    Im k swapping a dx too im almost finished with mine lol ive done alot of research

  • @johnathanacosta8119

    @johnathanacosta8119

    Жыл бұрын

    Its the same thing i believe its like under the same trim as an ek kinda how you have. An accord ex or lx yk but its still an accord lol

  • @material7850
    @material785010 ай бұрын

    Anyway you can send me your shopping list lol. I have a 99 hatch and am buying a k20

  • @TheLegendaryTaco
    @TheLegendaryTaco Жыл бұрын

    Cost estimate ?

  • @victorsabala2108
    @victorsabala21085 ай бұрын

    what you know about Hush

  • @AgSherr
    @AgSherr2 жыл бұрын

    👍 Bruh! I DM'd you a link about the Bluetooth for the Radio delete. Check your Instagram...and, Thank a Sista later. Lol Great Stuff!

  • @soulja967
    @soulja9672 жыл бұрын

    Lmao that shit started up like a lawn mower

  • @umum7629
    @umum76292 жыл бұрын

    What basemap did you use for your k24a? On kpro

  • @BrokeBoyAndy

    @BrokeBoyAndy

    2 жыл бұрын

    It’s a stock tsx on 91 basemap

  • @umum7629

    @umum7629

    2 жыл бұрын

    @@BrokeBoyAndy bet thank you 🙌🏾

  • @stevensanchez330
    @stevensanchez330 Жыл бұрын

    Which foamer did you have on that hose ?

  • @BrokeBoyAndy

    @BrokeBoyAndy

    Жыл бұрын

    Not sure, I got it a while back at autozone

  • @6lackRain
    @6lackRain Жыл бұрын

    paint color code?

  • @BrakkuRaion8
    @BrakkuRaion8 Жыл бұрын

    Finally, someone we can relate to vs all the other guys who don't want to "sting the budget". Stfu bro, you got like 20gs into that k swap smh lol

  • @Anthony47.__
    @Anthony47.__2 жыл бұрын

    It be them weirdos who don’t like the video

  • @MrManny088
    @MrManny0882 жыл бұрын

    💯💯💯

  • @timm5970
    @timm5970 Жыл бұрын

    why dont you just flip your shifter

  • @Justmyluckk
    @Justmyluckk Жыл бұрын

    I’m 7k deep in my swap already

  • @anthonyu93

    @anthonyu93

    Жыл бұрын

    What’s left

  • @Oni64
    @Oni642 жыл бұрын

    Orale

  • @miguellozano3268
    @miguellozano3268 Жыл бұрын

    Who cuts there fire wall to pass the shift cables ??! Lmao , the car is pretty clean but that looks awefull : /

  • @ekk2471
    @ekk2471 Жыл бұрын

    If you live in Cali it's not even worth it unless it's just a track car

  • @samhendren1171
    @samhendren1171 Жыл бұрын

    What wheels are those?

  • @mangi-iscool
    @mangi-iscool9 ай бұрын

    I gave a thumbs down because I don't miss the s2k.

  • @marvinreyes6270
    @marvinreyes627013 күн бұрын

    Just asking if k24a3 rbb3 head tsx tranny 6 speed what kind of shifter cable i need

  • @johnfarias7230
    @johnfarias72308 ай бұрын

    Anybody ever need this done in Rhode Island and Massachusetts I am your man I can build wire harnesses and put these engines in with no problem I have done it to an Integra a 95 Civic a 2003 Honda CRV manual swap to

  • @xendeon
    @xendeon9 ай бұрын

    Hoe hard is it to kswap a suv

  • @iehonda
    @iehonda2 жыл бұрын

    🔥🔥🔥

  • @material7850
    @material785010 ай бұрын

    Anyway you can send me your shopping list lol. I have a 99 hatch and am buying a k20

  • @material7850
    @material785010 ай бұрын

    Anyway you can send me your shopping list lol. I have a 99 hatch and am buying a k20

Келесі