Akko Switches : en.akkogear.com/store/switch/?ref=mczstudio

stock 01:42 - cream blue 01:50 - cream yellow 03:08 - pom brown 03:15 - pom silver 03:24 - pom pink 05:24 - cs crystal 05:32 - cs crystal blue 05:40 - cs crystal wine red 05:48 - cs crystal silver 06:35 - cs snow blue grey 07:26 - cs air lubed 10:02 - cream blue 10:10 - cream yellow 10:18 - pom brown 10:26 - pom silver 10:34 - pom pink 10:42 - cs crystal 10:50 - cs crystal blue 10:58 - cs crystal wine red 11:07 - cs crystal silver 11:14 - cs snow blue grey 11:23 - cs air

@thoul4165

7 ай бұрын

what means lubed? Is it then with foam or what?

@HaNguyen-vw4jt

2 ай бұрын

@@thoul4165 with grease

For myself: 10:02 - cream blue 10:10 - cream yellow 10:18 - pom brown 10:26 - pom silver 10:34 - pom pink 10:42 - cs crystal 10:50 - cs crystal blue 10:58 - cs crystal wine red 11:07 - cs crystal silver 11:14 - cs snow blue grey 11:23 - cs air

the editing on your videos is asmr in itself the whole experience is so satisfying to watch

Awesome video! I learnt about my current favorite switch (Akko V3 Cream Yellow for those people wondering) from you quite recently. Amazing videos! Love all your shorts!

@mczstudio

Жыл бұрын

hi!

Thanks! I have been waiting for these reviews for so long and no channel uploaded but you!😆

@mczstudio

Жыл бұрын

i'm really fortunate to received it abit earlier!

Thank you this was super helpful ^^ I love how the cream yellows sound

@mczstudio

Жыл бұрын

Glad it was helpful!

im using the cream blues and really loving it. hoping to grab more of this newlines from akko

i just ordered some cream yellows and this helps me feel more confident in my purchase thank you

My favorite part is that they’re not just recolors! And the extended pole of the silver.

Finally, an actually good review! Thanks, I've decided for Akko V3 cream yellows for my next build! :D

@mczstudio

Жыл бұрын

Glad I could help! happy you found my channel

@Lazy_Studios_official

Жыл бұрын

i got the same ones they sound amazing

@dorcasmalahlela2805

Жыл бұрын

How do they feel? Wrists and fingers. I'm looking to get a keyboard, and all these terms are a bit confusing. Does it need low-med-high force to press? I really like the sound.

@Lazy_Studios_official

Жыл бұрын

@@dorcasmalahlela2805 med-high force id say but im not the best person to ask because i havent tried out many switches

@wil-

Жыл бұрын

​@@dorcasmalahlela2805I feel it's lighter if your coming from a membrane, and it's a bit heavy if your used to mechanical keyboards, especially something like cherry mx reds, gat reds, or any other switch commonly found in stock keyboards. I do recommend these for the price. In my country, these things are $0.27 a piece, and even cheaper getting the boxes. the weight is 58g for actuation force, which I think is best for me, because I find gat yellows too light. Coming from a membrane, I think this isn't for you, because it may be too light, and will affect your typing speed or gaming performance. The actuation force really depends on the user, cuz my friends and parents find it too light, because most of them come from membranes. So in conclusion, yes I recommend this if it's not your first time you tried mechanical keyboards, but if you're from membrane, do consider something else. And for this I recommend jwick ultimate blacks with the 63.5g spring, because it's a similar feel, just linear, and as soon as you get used to it you can try basically any other switch no problem, unless it's heavier. I think it needs a mid press, because this is my 2nd custom I've built now. Good luck, and I hope this helps :D

Congrats on 1.25k subs, gl on the road to 2k. Ur growing at a really fast pace.

@mczstudio

Жыл бұрын

it iss! quite overwhelming 🫠

The Keebroll cuts are so useful for judging the switches, wish more reviewers did that! Thanks for doing this extensive showcase of the Akko switches. Just commenting that for the interference section, you could have presented the data in a table (YES/NO interference as the column headers and the switch name/pictures underneath, pole length and other data optional) instead of just showing them on camera and relying on subtitles, since it makes it much more easier to understand at a glance.

@mczstudio

Жыл бұрын

hi! thank you. happy to be able to do such video. 🙇‍♀️ I’ll make sure to improve on that area. thank you for the inputs 😀

The cream blues are my favorite tactiles from Akko. This is the only P shaped (early bump) tactile bump from them afaik & they have a clacky sound (high pitch, but not poppy like the crystal blues). I would however swap the springs to a lighter 22mm spring for a snappier feel. At only ~$5.5 from Taobao they are AMAZING value.

@mczstudio

Жыл бұрын

dang Taobao is definitely the way. Sucks my google translate dont work so well on that site :(

@aseannessienot

Жыл бұрын

@@mczstudio yeah they have many budget keebs & switches that the world doesn't know about

@bobaipanda

Жыл бұрын

i cant find akko cream blues on taobao w2c?

@wall8350

Жыл бұрын

Is cream blue tactile heavy?

@frankwang301

8 ай бұрын

@@aseannessienot well people in china and singapore definitely do

I'm love this video, it's so relaxing. A great sound

Wow, those were a lot of switches to cover and lube. Thank you so much, wish we could see more love and detailed coverage like this one for Akko switches on KZread. You got yourself a sub. The only Akko switches I've owned are Jelly Blacks (hand lubed) and Lavenders (pre lubed). I like both linears and tactiles a lot and was looking for something as creamy as my lubed Jblacks(they're amazing on my Keychron v1), but a little bit lighter and easier to press. From all your replies seems like V3 cream yellows would be the answer, but they're out of stock at my local Akko vendor (can't buy directly from Akko because of customs issues). Trying to decide between the CS airs and the v3 Cream Blues. I don't really mind tactile, but I doubt I'll find an experience better than the lavenders. Maybe if I lube the CBs heavily enough. Idk, ranting now! Anyway, excellent video and thanks.

this was genuinely so helpful, thank you!! i need to change the switches in my board and have been super overwhelmed by options 😅

@mczstudio

Жыл бұрын

it is, I was overwhelmed too. In fact, I'm still overwhelmed by until now. ~

Damn the videography is on another new level like the thumbnail look appealingly beautiful ~

@mczstudio

Жыл бұрын

thank you!

just ordered cream blues and crystal silver. I'm so excited

@mczstudio

Жыл бұрын

which board will you use them on? 😲

wow this video is so helpful! I'm taking notes before buying my next switches. Thank youuuu :)

@mczstudio

8 ай бұрын

thank you so much ~

i was about to comment how they all sound almost the same (and how you can notice the difference when you listen closely), but that keebroll was very helpful!

@mczstudio

Жыл бұрын

thank you. the difference was abit obvious on the acr pro 75!

So damn informative! Never see such video of great knowledge

Cream blues are just so damn good, even when unlubed!

Thanks for making this video, it's very helpful. I hope i can make my keyboard sounds like yours ☺️

Good video, really nice effort checking the cherry interference too!

@mczstudio

Жыл бұрын

I got asked about it alot. And I might have answered wrongly to some people before :(

I found myself really indecisive with switches and I was always buying expensive switches, but this week I've decided to give akko a shot with the Akko V3 Cream blue pros and I'm really liking them, so most of the switches I buy now will probably be from akko so I'm not spending so much on switches haha.

The Pom browns sound so good

amazing video!! thanks!

@mczstudio

Жыл бұрын

thank you :D

cream blue is just SOOOOOOOOO good

Cream yellow sounds the best for me.

thanks bro, this helped finding switches that i liek

@mczstudio

Жыл бұрын

welcome!

solid + informative vid! but brooooo.... you really lubed all THAT

@mczstudio

Жыл бұрын

you bet i did 😵

Hello! Great video and I would like to ask what profile are your keycaps and also which switch do you think is the most deepest, poppy and best feeling. Thank you!

@mczstudio

Жыл бұрын

its cherry profile. deepest would be either cream yellow, snow blue grey, ca air. poppy is crystal silver best feeling for me goes to lubed cream yellows

heyo, just did a snow blue grey build, to get a more deep sound, 100% lube them, its worth the effort honestly. im addicted to how good they sound

@mczstudio

Жыл бұрын

I had them on my zoom65 v2 build!

@Luna-yp1jb

Жыл бұрын

@@mczstudio Sickk, I kinda want to get the Akko match greens, just to really see the difference in sound. But I love the deep hollow thock sound I get on my space bar with the snow blue greys

What should I get? I’m debating on: - AKKO V3 Cream Yellow Pro - AKKO V3 Cream Black Pro - AKKO V3 Silver Pro Which one should I get? I used to have a Red Switch Keyboard but had to buy a new one cuz it broke. I now bought the same keyboard (RK61) but in came with Brown Switches because it was on sale. Which one should I get from the 3 Switches I mentioned? I want to try something different than Red Switches BUT would give me almost the same experience.

How do they compare with the jelly blacks ? Any opinions?

um hey. which one is good for typing? i like it light and creamy sound profile. and im too lazy to lube or modding it tho. thanks

Very helpful vid thanks for making it. I'm between Cream yellows, POM Silvers & CS Crystals. I don't know which one to get they all sound so good 😭

@mczstudio

Жыл бұрын

thats quite a broad selection you got there ~ when im in doubt, I always get the cheapest first. 😅

thank you for making this video!

@mczstudio

Жыл бұрын

been pressing and using all these for a while now. if say the cs air!

I straight up heard a dolphin sound when I first click on cs stock crystal's timestamp

May i ask: which switch in this video sounds the poppiest? Or just clacky?

What is cherry interference? I’ve never heard about that paper test before, what is the purpose of it?

Thank you so much for the review! In regards to creamy V3 yellow, do you recommend to remove factory lube before applying your own? Or just add some crytox over it?

@mczstudio

Жыл бұрын

hi. I didn't remove any. there was barely any anyway! I just add my lube on top of whatever it have or may have not!

@arethas6537

Жыл бұрын

Akko switches (aside from the pre-lubed variants) are not factory lubed aside from the dry lube that’s on the leaf which is not thick enough to potentially cause overlubing, you can basically treat them as bone dry switches and just lube them conventionally.

@drakegostream

Жыл бұрын

@@arethas6537 glad to hear that, thank for the heads up!

Great video, thanks for taking the time and effort. 👍👍👍👍Subbed

@mczstudio

Жыл бұрын

thank you ~

Is every 5 pin switches compatible with eachother? I have an akko 5075B Plus, and i dont know what kind of switches can i replace.

which do you think is deeper and creamier, cream yellow or cs air? New subscriber btw, keep up the great job!☺

@mczstudio

Жыл бұрын

hi! welcome. i think its cream yellow! 😁

hello, what switch do you think produce the more creamier sound irl? couldn't tell the difference while watching the video. Sorry

@mczstudio

Жыл бұрын

hii. cream yellow for the creamiest typing feels

Hi MCZ, do you recommend adding .15 switch films to linear switches (particularly Cream Yellow v3) apart from lubing or lubing itself is already enough? Thanks!

@mczstudio

Жыл бұрын

no, i dont think films are necessary as the housings are tight enough. i would recommend to lube the cream yellows tho, for that ultimate buttery feels 💯

great video! one question, do you feel like the POM silver are worth it over the cs silver? I like the nk creams but I don't know if the extra price is worth it

@mczstudio

Жыл бұрын

if you don’t plan on lubing the pom silvers and want to use them for a prolonged period of time til they get smoother themselves, id say its worth it. also as both silver are on the same price point. its only a matter of wether you want it smoother/creamier or you want the crystal body for better rgb. for the nk creams, i cant really comment on it as i havent tried it

@lorenzocortes8949

Жыл бұрын

@@mczstudio I plan to lube them (either getting the POM or cs). I don't want RGB just to get a smooth and low travel switch. Thanks for your response!

which switches are the deepest or thockiest in your opinion?

which of them do you find the thockiest?

I love my cream yellow v3

Ahh, at first I wish you test Matcha Green and Jelly Black too 😢

@railfans-psi

5 ай бұрын

And then...

For the snow blue grey. Is there much difference between stock n lubed? Thanks for the indepth review for all the new switches. Considering getting cream yellow too

@mczstudio

Жыл бұрын

not really. the creams and this snow blue grey, not so much drastic change after lubing!

@zelk0vatx

Жыл бұрын

@@mczstudio ah ok...thanks! Just ordered the snow blue grey. Mayb i'll try lubing a few n hear in person. But so far it seems to work well for stock!

the fact is, on my next keyboard i can afford a switch up to holy pandas and all of that but i literally prefere cream yellows

How did you make a tactile switch into thocky

How is creamy yellow comparing to jelly black? I prefer thock build and wanna try akko switches but don't know which ones should i choose as there are so many switches.

@mczstudio

Жыл бұрын

the jelly black is slightly heavier. it uses a longer spring and bottom out force is at 60gf compared to cream yellow's 58gf. although operating forces is same at 50gf. I find the cream yellow more pleasing in sound profile. you can check the my typing and keeb roll sound of the jelly black in my previous vid! kzread.info/dash/bejne/ZGydrpiAhb3KnMo.html

What keyboard and mods do u use? Love the vids btw.

@mczstudio

Жыл бұрын

hi there! i was using a kbd67 lite here. durock v2 and a keebtape. below are the items I used for your quick reference, I've added the full assembly video link too! however, some items like the switch and the keebtape, I just replaced and added along the way . kbd67 lite : dangkeebs.com/products/kbdfans-kbd67-lite-r4-65-barebones-keyboard-kit?ref=A1ZPmODzD_fBYL Keebtape : keebmat.com/products/keebtape?ref=mczstudio durock v2 :amzn.to/3LqAUIZ Keycaps : amzn.to/3HYs1Ek Switch : en.akkogear.com/product/akko-cs-snow-blue-gray-switch-45pcs/?ref=mczstudio Kit Assembly video : kzread.info/dash/bejne/fK2N1plpe9uugqw.html

I know this comment is kinda late but... Loved the video! I'm currently choosing between cream yellows or crystal red wines. I like the "thock" and quietness better, but I'd prefer heavier switches. Which one between those two would you recommend?

@mczstudio

9 ай бұрын

cream yellow has more thock tbh. crystals are kinda clackier! to mute them out , add some foams :D

Have you changed up any parts between these switches to make your ultimate Akko (Frankenstein) switch? If so, what has been some of your favorite combination(s)?

@mczstudio

Жыл бұрын

hi! no, i don’t do frankenswitch on my akkos 🫣

Really helpful video, just a question, are the Akko V3 Cream Blue/Yellow compatible with outemu sockets? I read that all CS switches suppports it but there isn't CS on the name so I'm a bit confused

@mczstudio

Жыл бұрын

from this video, someone from the community confirmed akko’s compatibility with outemu sockets! you can check the pinned comments 😁 kzread.info/dash/bejne/fJN-wZRpkpren5c.html

@kyuukidesu2809

Жыл бұрын

@@mczstudio oh that's great news thank you for the help and also for the great video :D

May I ask what stabilizers you are using? So clean sounding.

@mczstudio

Жыл бұрын

durock v2!

Hello! Whats the difference between pom silver and cs silver? Since im currently using cs silvers right now. Is it more marbly?

@mczstudio

Жыл бұрын

the crystal silver was intended to be poppier that the silver . and for better rgb. tho the difference in sound profile as i tried is not too much

@johnsci911

Жыл бұрын

I have both cs silver and pom silver installed in my board, I would say POM Silver has deeper sound than CS Silver. I want my board to be more on deep sound but I only bought 1 box so for now I installed POM Silver as Mod keys and CS Silver as my Alpha. Space bar's sound? I love them on POM Silver its deep! tho I only tried Radiant Red, CS Silver and Jelly purple (not coming back up I hate them) I don't want to waste money that's why I am keeping my CS Silver as my Alpha :D but.... I am planning to put POM Silver all the way it's just I don't have the time to replace them all

I wish there were timestamps on this video, but ty for the informative video!

@mczstudio

Жыл бұрын

there is!

@mr.swedishfish12

Жыл бұрын

@@mczstudio ah, I meant the ones embedded in the video. it's easier to navigate for mobile users

@mczstudio

Жыл бұрын

@@mr.swedishfish12 if you mean chapters/moments, it should be there by now :D

I'm using Mod008 with Akko Rose Reds. Any suggestions on which of these new ones to get as replacements? Looking for Linear, Thocky, and light weight ones.

@mczstudio

Жыл бұрын

also just got my mod006, I do want to see how these switches would sound on akko's alu body as well! I'll check on it first :D

@gbsenires

Жыл бұрын

@@mczstudio thank you! Subscribed so I'll be the first to see when that vid comes 😊

very nice video!

@mczstudio

Жыл бұрын

thank you!

How do you lube your switches or do they just sound they amazing with just 205g0

@mczstudio

Жыл бұрын

i used 205g0 for the housing and stem! and 105g0 for springs. i think 205g0 for all should be just as fine

nc vid ,i know u will make a vid like this when i seeu unbox crystal and snow+air but i thought u will make a vid sound stock and lube like akko cream . Can u try some some deep thock sound switch?

@mczstudio

Жыл бұрын

was planning to do that way but there’s just so many ways to do the video considering how many switches was inside 😬

I want to buy cream blue or yellow but the problem is i dont know if its fit on my Rakk ilis please help me.

@huunhanle3809

Жыл бұрын

Correct me if I'm wrong but I believe that keyboard has Rivet hot-swap sockets right? If so, then Akko switches can fit very well with that rivet sockets.

which linear in your opinion after testing it out is the most smooth stock?

@mczstudio

8 ай бұрын

i like the lubed crystal silver best. but if you want smoothest stock, go for cream yellows

How's the tactile event of the POM Brown's compared to the Cream Blue's in your opinion? Is it lite like other common brown switches (gateron/cherry/etc.) or better?

@mczstudio

Жыл бұрын

i havent tried any other brown switches so i cant really compare few difference i've notice between the pom brown and cream blue is the tactile location, pom brown will have an obvious recess before it gives the bump. cream blue on the other hand, the tactility was right on top. another large difference, is the cream blue was very snappy, and audibly louder than the pom brown

What's the thockiest please give me a tier list

Does someone know a keyboard under 60€ or dollars where i can put the akko v3 cream yellow ones on?

Which one do you prefer: V3 Cream Blue, or CS Lavender Purple?

@mczstudio

Жыл бұрын

not a tactile fan, but between the two id go with cream blue 😁

Keyboard mods? Great vid. Could finally find which switch I want. I'm trying to get a full pc, full pom and full nylon set of switches for frankenswitches. I'm still undecided on the pom switches though. Do you have any experience with mmd creams? Would love to see how these compare to allow ones. Other then that, easiest sub ever.

@mczstudio

Жыл бұрын

hey there! unfortunately no, i havent try that switch yet! for the board mod, its about 90% from the kit, i've only change the stabs to durock v2 with holee mods innit. also for this video, i've added a keebtape below my PCB. i link it below for faster reference. ✨ KEEBTAPE : keebmat.com/products/keebtape?ref=mczstudio

@minit512

Жыл бұрын

@@mczstudio thanks for the reply! All the switches sounded great in this board. Are you going to do a review of the MM Switches from Wuque?

Hello! I’m sorry to bother, I was wondering which switch is deeper sounding, the Crystal Silver or the Air, especially on the space bar. I currently have the Gateron Pro Silver and am looking for a different linear switch. Thank you!

@mczstudio

Жыл бұрын

hi! CS air gives a deeper sound! but I personally use the cystal silvers for my modifiers. i like my spacebar poppy.

What’s your favorite?

@mczstudio

Жыл бұрын

hmm, for the typing feels. cream yellow on how how accurate and fast i can type on it would be pom silver for the sound profile. hmm, snow blue grey. sorry! its just impossible to choose one :D

@zootedmonkey3725

Жыл бұрын

airs

@alex--572

Жыл бұрын

Akko V3 Cream-yellow🔥🔥

i a still deciding between the cream blues and the yellows

@mczstudio

Жыл бұрын

get both? 😜

Is there a 10 piece version of the blue creamy v3? I ordered 2 boxes (90) but they sent me 9 boxes each box have 10 switches and im scared it may not be original

@mczstudio

Жыл бұрын

i think its possible that retailers repack some switches in order to cater to smaller orders. but if you buy directly from Akko, they only sell in 45's

@lakayabonar9033

Жыл бұрын

@@mczstudio hmm, ok thanks!

How do you think the linears from these compare to jelly blacks? I'm looking to buy the jelly blacks but I wanna know which ones are better. And which ones do you think are the best. I'm only looking for the 3 pins.

@mczstudio

Жыл бұрын

hi! choosing one 'best' will be kind of difficult as these linears also falls into different categories! but we can narrow it down on which is the best according to its price, we can choose cream yellow. and its near to how heavy jelly black can be if thats the kind of weight you are going for! hope this helps ~

@hussainmithi8883

Жыл бұрын

@@mczstudio Oh wow. The yellows are $9 and JBs $12. But if price isn't in the equation, in terms of sound and typing experience, which ones are good? Not too light like the silvers.

@mczstudio

Жыл бұрын

cream yellow for me 💯

@hussainmithi8883

Жыл бұрын

@@mczstudio oh cool. Thanks for the help!

is this good for north facing pcb? because i’m planning to buy the cream yellow one someday

@mczstudio

Жыл бұрын

it will work just fine on north facing pcbs! but if your asking about interference, you might want check out the video around 07:33 mark, and the pin comments together!

Hello where you get your data cable for your keyboard?

@mczstudio

10 ай бұрын

here's my exact configuration! store.cablemod.com/configurator?load=kbc:4d1d638497de&ref=63369

Hello po, fan from the Philippines here, ganda po ng content niyo 😁 sana ako rin makapagcontent ganyan! Keep it up po, pawer!! 💯

@mczstudio

Жыл бұрын

haha pasok lang suki. salamat po 😂

Do cream switches have interference? They have a shorter total travel distance, but I want to make sure they don’t.

@mczstudio

Жыл бұрын

you can refer to the interference check at 07:33 mark

I’m looking for the most quietest switch they have, what would you recommend ?

@mczstudio

Жыл бұрын

i think that would be difficult in relying on switch alone. you might need to add a couple of foam dampener to your board to have an overall quiet build! 😄

Have you ever tried the akko rose red ? And if you have would you recommend it over the cream yellows ? Please let me know🥺

@mczstudio

Жыл бұрын

heyy. no sorry. i haven’t tried it yet. 😞 werent they discontinued already?

Is your keybord modded or they just all sound so good?

@mczstudio

Жыл бұрын

my keyboard mod is a 2 layer tape mod 😁

I might've missed it but what board are u using and with which mods

@mczstudio

Жыл бұрын

you can check the board buil from here! i did silicon tape and durock v2 for stabs. the rest are from the stock kit! kzread.info/dash/bejne/fK2N1plpe9uugqw.html

What mods are on your kbd67? It sounds incredible

@mczstudio

Жыл бұрын

tape mod and durocks! i did the full build here -> kzread.info/dash/bejne/fK2N1plpe9uugqw.html

What's the keyboard where there are sound all thock???

@mczstudio

Жыл бұрын

its a kbd67 lite

Hi, for Akko Switch which one that recommended for Gaming, base on response time but linier, i test G silver (wasd) but still got latency, the base switch is red (like for typing sound), So far for Blue the fastest response, but too loud, it seem Akko look better in sound and response

@mczstudio

Жыл бұрын

interesting!

@KakataSweet

Жыл бұрын

@@mczstudio i wonder if mixing switch type reduce speed like hard disk speed

I really like your KBD67 sound. Does it have any mods?

@mczstudio

Жыл бұрын

aside from tape mod, you might consider getting a quality material keycaps. it doesn’t have to be an expensive one, just quality 😉

@katniss3175

Жыл бұрын

@@mczstudio I have tape mod and nicePBT keycaps already, but I just pulled the noise dampener out of the case and I'm liking it a lot more!

Hi! Which akko switch would you recommand stock? Im kinda new to this hobby and too lazy to lube haha

@mczstudio

Жыл бұрын

i’d say the crystals are a must lube. the v3 line, snow blue grey and cs air are fine stock. though definitely better when lubed. the pom line are scratchy ootb but pom materials tend to smoothen out over time with prolonged usage.

@screeninja2521

Жыл бұрын

@@mczstudio I think ima go with the cream yellow v3 stock. They sound so creamy!

Can someone help me? I currently have cs silver and planning to get the cs crystal silver, what are the main difference? I am aiming more on gaming side and thockier sound profile would be a bonus, appreciate it! Thanks!

@mczstudio

Жыл бұрын

from what I know the cs crystal silver is meant to be poppier than the cs silver because of the materials used . and for better rgb

@timothyjeremiahtaal1665

Жыл бұрын

By poppier what do you mean?

hello nice video and very helpful, thanks for making this video. I want to ask about the lightest switches among cream yellow,pom silver, crystal silver,and snow blue grey ? I want to used it for gaming coz my getaron yellow fill heavy then cherry mx red...

@mczstudio

Жыл бұрын

heyy. its the silvers!

@andreassuwardi5870

Жыл бұрын

@@mczstudio pom silver or crystal silver ?

@mczstudio

Жыл бұрын

@@andreassuwardi5870 crystal silver is technically lighter by abit. for me i cant really tell. i would go with the pom. i like the sound profile of it than the crystal silver which is higher in pitch.

@andreassuwardi5870

Жыл бұрын

@@mczstudio thx youuu

Which switch do you think is the deepest sounding? Im planning to replace my crystal switches to snow blue grey

@mczstudio

Жыл бұрын

snow blue grey was poppy! deepest sound on my board is probably cream yellow and cs air

@chihao6351

Жыл бұрын

@@mczstudio which one do you think better? (between cs air and cream yellow), I'm a little bit confused.

@mczstudio

Жыл бұрын

@@chihao6351 i love how cs air sound abit deeper than the yellow. but its not as creamy as the yellow. sound wise i go with cs air. feel wise i go with cream yellow. now it all falls down on which you prefer more :D

Can I use any of them on my Anne pro 1? I want change my gateron red switches and put the v3 BLUE ones. I never made any of this mods and its my First time trying!

@mczstudio

Жыл бұрын

you may use it it but I’m afraid you have to desolder it first. i not sure but seems like Anne pro are not hot-swappable!

@giovannalucena7817

Жыл бұрын

@@mczstudioI Didn’t know about that, but I bought a new keyboard. A Redragon Elise pro. It has blue switches but I’m thinking about change it to black switches since it only accepts redragon low prof switches. I just want my keyb not sounding bad 😩

TUKKRUTUK TUKRUTUK FEELS GOOOODDD

@mczstudio

Жыл бұрын

hi! been a while ~

What stabilizers do you use

@mczstudio

Жыл бұрын

hi! its the durock v2 :amzn.to/3LqAUIZ

Hello!! I've been looking through weather to buy cream blue or cream yellow, and ive been debating on myself for a while. I like switches with a not so clicky touch but also thocks nicely, with a speck of crunch to it. I may use if for studying, and gaming for both. I like the feeling of clicking something, like for example a light switch. Which one do you recommend for me?

@marcoservaes505

Жыл бұрын

And also without a modded keyboard, but maybe lubed?

@mczstudio

Жыл бұрын

hey. seems like what you want is both linear and tactile at the same time. 😅 and it sounds alot like cs lavender or the akko pom brown. tactile but not so heavy and still fairly light. for the lubed part, you might take a look at the pom brown. its not lubed, abit scratchy ootb, but pom material tends to smoothen out with prolonged usaged overtime if you’d really want to get either the creams. i suggest you get 1 box of both. put on your board, one set for the alphas and modifiers, and other set is on the lesser use keys (aka f row num rows) that way you can check which among the two you prefer most! ~hope this helps in any way

@marcoservaes505

Жыл бұрын

@@mczstudio Thank you! I have been taking interest in the lavender and brown aswell, and this helps alot. I am looking to buy an rk68, and im not quite sure if it will sound simillar to your board, since it is modded. may i ask, would the matcha latte kiiBOOM switches sound decently similar to my rk68? I've been taking a big interest in the matcha latte one answell, and i cant seem to choose which. But ofcourse, its hard to decide which switch would be the best choice. This would be my very first keyboard, and i want to find the most preferable choice.