I followed the link and bought the best ones. Never seen them before good find.

@ToolReviewZone

2 жыл бұрын

Hahaha, TIA in da house! 👊💪💪

@MichaelMantion

2 жыл бұрын

@@ToolReviewZone You show the flip toggle (zip ones) but I didn't see you use it????? Those are clearly the best.

@jimf.625

2 жыл бұрын

Great demonstration but the Ook hook with the oval nail in plate was installed incorrectly. The hole in the plate should be moved up to where the anchor goes into the wall and the hook is centered in the oval plate. Then nailed in. This allows a lot of weight to be placed on the hanger that rests against the plate. It actually worked out well for me. I have a very heavy shadow box hanging on one and it is a solid hook. 🍻

@bluemantom77

2 жыл бұрын

That's what makes this the best to community we help each other find the best of the or the best tool deal win win Clint you knocked another one out the ball park

@dderossett

2 жыл бұрын

me too!

I thought this was going to be a dry video. However I was anchored to it. You nailed it without screwing it up. 👊😎👍

@ToolReviewZone

2 жыл бұрын

Threeeeeee!!!!! 3! THAAAAAREEEEEEE! I KNEW YOU COULD DONIT DAN THE MAN 🤣🤣🤣🤣🤣👊👊👊👊

@dantheman9395

2 жыл бұрын

@@ToolReviewZone I would like to thank TRZ for the support and opportunity to do this. As well as everyone else in the community for the patients for it to happen ✌️✌️

@ToolReviewZone

2 жыл бұрын

Hahahaha, your definitely the man Dan

@dabmanian_devil

2 жыл бұрын

i only use oook 53 nail 10lb drywall hook hangers now

@BummerSlug

11 ай бұрын

Lmao!! Nicely done

Good video. The metal hollow wall anchors that you hammered in and they destroyed the back side, I agree that's terrible but I've had great results with them holding tremendous loads if a hole is drilled for them instead of hammering them in.

@ToolReviewZone

2 жыл бұрын

Thanks for the feedback Buzz. Just did them like the directions stated, but a drilled hole would probably be much better 😉

@scottsparky1

2 жыл бұрын

I agree I use these all the time in commercial work hanging pannel heaters and hand dryers and never had an issue but you have to drill first and use a setting tool to anchor them in.

@tighecrovetti2844

2 жыл бұрын

Came here to say exactly this. With a clean backside, that 'spider' style grips the hell out of the drywall.

@makesaveinccomm

2 жыл бұрын

@@tighecrovetti2844 yeah . it work. but don't buy those at Harbor Freigh. they are junk. it broke off before finish screw....

@mccoma11

Жыл бұрын

Came here to say this. These anchors are awesome when pre-drilled. They've been my go-to for years when installing something significant, such as tv mounts (I always catch at least one stud, as well).

Great Video. Thanks ! Just got a Claw Drywall picture hangers last week, and have not tested it yet, and just glad that I watched your video today, you have been very helpful

The Pop-Toggle comes with a small prod designed to engage the retention mechanism. After inserting the toggle you push the prod through the hole to 'pop' the wings out. THEN you can drive a screw. The instructions are printed right there on the package. It's amazing how many reviewers on KZread miss this.

@username-mc7jw

5 ай бұрын

Yep. I noticed he failed to pop it open, then said he hated them. They are the only ones I use for heavy duty applications. Funny, but the one with the giant wall plate was installed wrong too. Why make a review video, when all you're doing is showcasing your ignorance???

Great video, it helped me just buy the 3M Claw anchors. Thank you for taking the time to test them all and save us all the guess work!

Definitely a good video. I had to remind myself that this channel primarily does tool, hardware and power equipment reviews. The reason I say that, is because I found myself really hoping that you would hang a luggage scale or some plate weights from each one after install to see how it performed. All that said, I still did smeeEessh that like button!!

Love your style man very informative, this is a must watch vid fir all homeowners.

I only use the metal ez anchors. Those plastic ones are far too easy to strip. The metal ones can also go into studs.

Interesting vid...but opinion based on fastener installation ease & damage upon removal. The purpose of these drywall fasteners is to mount items on the wall w/o the use of the studs. You should consider a follow up vid testing their lateral (and vertical) strength which is what their intended purpose.

Wow. Interesting vid. Entertaining too! Didn't know there were so many types of anchors. I'm looking for one for shelving. You saved me money and time. Thanks a bunch!

@ToolReviewZone

2 жыл бұрын

Awesome, thanks ks for the comment Kathy !!!

😂 This video helped me a lot as I stood so confused staring at a wall of hooks at pini ace. This video also made me laugh a lot.😂 Good job and keep it up!

For the most part on home Depot anchors I have been using the yellow wallclaw... That was really interesting seeing how it performs on the backside of the sheetrock

@ToolReviewZone

2 жыл бұрын

Awesome, thanks for the feedback Jason!!!

@briangbga2619

4 ай бұрын

Wall claw is garbage, pulls right out under any force. Metal toggles much better

I'm pretty sure you installed that first Ook device plate upside down. The plate should be flush against the drywall and works as a stabilizing bracket to the hook. If installed correctly, this one will definitely support more weight than any of the others, so you have to consider what you are trying to hang in determining which fastener is the best option. I wouldn't use it to hang a simple picture frame, but for a large decorative mirror or shadow box this would be a go to device.

@randypeters366

2 ай бұрын

He doesn't seem to have any idea what he's doing.

Superb holding power, no tools needed to use and virtually no hole if you remove it... HANDS DOWN THE MONKEY HOOK IS THE SUPERIOR SHEETROCK ANCHOR

Good vid. It's interesting to see the back of the drywall and just how damaging some of those anchors can be. 😬 Oh, and I see that DeWalt PowerStack battery trying to be all nass and inconspicuous like on the end of that new driver. 🤩 👍

Very good demonstration, keep up the great work 👍.

Thanks Clint really looking forward to watching this video right now. I know project farm did a video on drywall anchors and of course he is very thorough but his video included all types of brands and you are limiting it it looks like to home Depot and that's awesome because that's where I shop I'm not ordering anchors from Amazon and eBay, so this video will hopefully eliminate all the BS brands from Amazon and focus solely on what I will see on those raxit HD so I know exactly what to look for next time 💥💯

That driller toggle looks pretty sweet. I carry a lot of toggle bolts and the white screw in anchors in my bins. I remember back in the day when toggle bolts sucked ballz and had a flat head slot only. You would always stab the he'll out of your finger with the driver bit trying to get the freaking thing to screw in the wall.

Good thorough video Clint @ToolReviewZone

Real nice like Clint, I use the metal Z anchor at work for pictures and a toggle through metal studs (over kill) for heavier items. I got the new anchors you like “Real nice like “ thanks for another great video.

Thank you very useful information.

This is an excellent video! I think this one will end up being the gift that keeps on giving for TRZ! Good job Clint!

@ToolReviewZone

2 жыл бұрын

Thanks brother 👊

I use the extra anchors for most things including hanging bathroom accessories. A #3 bit on the gun is the best way to install them. I've used toggle bolts for microwaves and smaller cabinets where only 1 stud is available to fasten to the wall. The larger toggle with the zip tie thing you didn't show using has ratings up to 150lbs. and is nice using 6 of those on grab bars in showers if blocking isn't available. All in all everything has a different purpose. I'm not a picture hanger so not sure on those smaller ones.

Master of the video universe! Did an entire Home Depot section in 10 min. Hats off to you kind sir.

@ToolReviewZone

2 жыл бұрын

Haha thanks brother

I was not aware of the Wall claw. I think that is my new favorite because of strength. Maybe the Cobra. A long time ago we used the Molly anchors which were like the Everbuilt and they were great. The difference is that you have to pre-drill them in not hammer them. I think if you pre-drill the Everbuilt you would not blow out the paper at the back. Then they might be great. I hate the wing nut or butterfly bolt type. Although they are very strong because you spread the wight out on the largest surface area. You have to put whatever your mounting on the bolt before you insert the butterfly into the pre-drilled hole. Mostly I use the metal conical self drill in with a screw gun. Fastest and 50 lbs holding power. Here is a tip. Pre-run a drywall screw of at least 1-1/4" into the drywall to make sure you don't hit a stud or metal. That way you don't get a blowout.

Thank you. Fast, information, entertaining!

Will any of these anchors support Vince? 😂

@electricalron

2 жыл бұрын

😂😂🤣😂🤣💪

@Toolsinaction

2 жыл бұрын

lol

@ToolReviewZone

2 жыл бұрын

Hahahahahahahaha

@christopherhoward2848

2 жыл бұрын

Oompa loompa approved.

I've used most of those before. Not a fan of any of those plastic-bit ones. The Oof with the two push pins are wonderful for me. My wife changes her mind about 80 times when hanging stuff on the wall. Those make my patch work almost too easy. That said, hellllooooo monkey hooks. I have a sculptor buddy who makes stuff with big-ass nails. It is heavy. I have a 3m claw holding that up. Before I found those I had to run a wire between two studs. 99/100 the misses choice to hang things is never on a stud. Most of those can handle little things, but if need something with strength, don't cheap out. It makes a difference.

The Everbuilt and like said brand are great for campers and Rv's. Drill a pilot hole for them don't just hammer them in the paneling or your going to have a large repair to fix. Great video, love the humor.

The one I prefer the most is wingit. I have mounted tv brackets on walls, mounted safety grab bars in tile showers. They have like 300 lbs weight capacity.

I like the last one you put in and I have use the ones that you can hardly find in the stores for quite a while now

Great video. Very informative and helpful...

I was looking for the original vid where you showed your favorite anchor and came across this one. Cant believe i missed this one. I use those zip-its/EZ anchor. I never used the metal ones, id like those ones if using the screws they come with, but i like the plastic ones because i can use pretty much any screw for them since they're plastic and can use a variety of dif screws since they will cut their own threads. Those cobra ones are pretty cool too tho. Id use those. I like the ones you say are your favorite, i just wish they were sold at home depot, lowes, or somewhere local.

In your intro you had a flip toggle but didn’t show them. I use them all the time as an AV installer when a TV bracket can only hit one stud. They hold more weight than anything, but require a large hole 1/2”. You can also use them on block or steel studs.

Your new favorite is also MY new favorite AND...I'm one of those folks that helped Amazon sell out of em. :) I ordered them after your previous video about them. Thanks for the comparisons. It just proves that our new favorite is deserving of it's prestigious place on the list. LOL

@ToolReviewZone

2 жыл бұрын

Thanks so much for the comment and feedback Sam 👊

This is a great idea for a video but to be really helpful you would somehow test them for pullout strength or how much weight they would hold

Great video, VERY informative.

You probably already know this but Makita came out with NEW lawn equipment. A mower, a blower, and a string trimmer. The battery lasts 2 days on the mower. 36volts but here's the catch: You can't use two 18v batteries, you power all 3 with the back pack battery. Watch me forget I was hooked up to the lawn mower when I walk away. Pricey inconvenience, I calls it.

Nice. I've never seen those ones from Amazon, either. I'm thinking about getting some, since they're available right now.

I like the Everbuilt design. Been using them over 40 yrs. Way back when you could buy a box of 50, now only 3-5 per packet. Anyway, you have to drill a hole to properly install these. At least those were the instruction in the past.

Subscribed for the comedy alone, you my friend are hilarious and entertaining! 😂

Only seen some of the them and used them toggles you still got to drill a hole but they hold a lot of wait I used on to fix a shower curtain rod for family with 10 piece of plexiglass I cut came out well still holding perfect but it's good to know there's other options that you Clint for this information

Great video Clint. Much better than what that weirdo from Philly would do! LoL 😂

I've got a towel rack and a 85" LED TV I'm hanging today, and I'm going to use the 3M claw hook that rated well in this video. I'll let you know how it works out. Thanks

Hey the first video link still give you available anchors on the #1 favorite

When I am mounting something really heavy, I have never gone wrong with the trusty toggle bolts.

good review of each, thx,

Great review! One that you don't show, "Snap Toggles," is a safer alternative for molly bolts, because you can make the spreading back part be vertical which is much stronger than the random position of the spreading part of the mollybolt.

@TheSidneySmith

2 жыл бұрын

and the one he had on the "table" was the home depot version of Snap Toggles that I don't like. It only has one plastic run down through the wall to hold it in place and in use, they just end up losing the toggle into the wall. The snap toggles, with their dual plastic holders, rarely break off and fall into the wall requiring a second, third, fourth one to finally get you secured - especially when you are putting up and taking off an item a couple of times.

@davefink2326

2 жыл бұрын

@@TheSidneySmith yes you need two plastic stems to make sure the anchor is parallel to the wall as you pull the zipper tight. Otherwise it gets stuck, and breaks off.

@fixerupperer

2 жыл бұрын

I much prefer these to traditional mollys. The best part is they are reusable. They will stay when the screw is pulled out and the item can be removed from the wall.

@jerrkyd

2 жыл бұрын

I use Togglers all the time. They are very good for heavy objects like a wall mirror or medicine cabinet

The cobra Triplegrip are fine as long as you are not overloading them

Cobra and claw look like the best ones . I have used the first one you featured . To hang vanity mirrors . There not the best but they do work ok.

I've used most of these anchors over the years, never had any issues. Just use the right one for your needs.

Over the years I have used many different types of anchor systems. I like the Toggle Bolts, you can get big ones that will hold a lot of weight. But you have to drill a hole and you can't use them for every type of application. Those bright green anchors I have been using for years. They are easy and will hold 35 pounds. Most family pictures you mount won't exceed that. If I'm hanging something heavy, I make sure that I mount the item in a spot where I can use existing wall studs. Once again, if it's heavy, I have mounted a board/cleat across the wall screwed/lag bolted into the studding and used that board to screw hanger hardware into. Just don't use those little plastic anchors, they tend to give you, in a plastic baggie, with some items you buy that have to be hung. They don't hold up anything. Whether it be a wall clock, kitchen knife rack, furnace thermostat, hat/coat hooks, etc. Use at the very least those plastic screw in type anchors. They are okay for some things at least. Good video, demonstrating the available choices you can use to hang around with.

I’ve installed the no-drill anchors all over my house and I love them

Thanks for testing for us

@ToolReviewZone

2 жыл бұрын

Happy Thanksgiving

Thank you! I like toggle bolts or driller toggle for shelves, the 3M claw, and the monkey Ook. If I had drywall then I would try your favorite but I mostly have lath and plaster walls, so I could imagine that splintering the horizontal lath boards, :( . PS - The first Ook installation with the "medallion" does not look like the installation picture. The medallion needs to be up higher. That said, the nails will still slip out just like you said, so it is still a dog.

Felt like a proud parent when "ook" finally prevailed!! Way to go OOK!!! HAHAHAHAH Video was real Nass like!!!

I think you did the Pop Anchor a disservice……it holds the rated loads very capably. You asked how to remove? All packs come with the yellow pop tool that collapses the Pop Anchor. Now you can remove without tearing up the drywall.

The Wall Claw looks like it needs to oriented the other way so the flap that opens up is on the top. That one actually looks pretty good!

I bought the gold ones from Amazon after your first video. So far i like them

Fixing to plasterboard sucks. However toggle bolts have been holding up a 55" TV but the frame took 6 heavy duty bolts.

Which one is good depends on what you want to do. Many of those were for hanging a picture rather than securing a towel bar.

Thank you 😊

i mainly use stuff like that at work. i use metal zip-it and those zip toggles. i only use those plastic gray anchors for block, they are junk in drywall. sometimes i use tapcons. you forgot to show those grabber screws, they are for drywall, sometimes called wallhogs. they look like a very coarse treaded drywall screw

Because you don’t need me, you just keep me hanging on!! Now I got that song by Kim wilde stuck in my head thanks lol

@ToolReviewZone

2 жыл бұрын

Hahaha, and now in mine too 🤣🤣🤣

@davefink2326

2 жыл бұрын

You had to say that! Except now I hear the Vanilla Fudge version over and over in my head

Super about the wallclaws, they’re awesome

I’m a huge fan of the wall claws. Those babies are the only thing strong enough to hold my toilet paper roll holder to the wall. Things get pretty intense in there so I needed something that can handle some abuse

Great consumer testing, thanks.

@ToolReviewZone

2 жыл бұрын

Thanks Richard!

That claw one looks kinda cool.

@ToolReviewZone

2 жыл бұрын

I like that one too brother

Got them me anchors you like Clint, hung about fitty pictures and mirrors in record time, so far so good. Thanks Brother😎🛠️😎🛠️😎

@ToolReviewZone

2 жыл бұрын

That's awesome brother, glad they are working out Ted👊👊👊

I use the WallClaw, the bright green one. It’s not cheap, but it’s easy to use and most importantly Made in in the U.S.A.

The blue toggler box is what I fond is the best

Just bought a multi pack (8) of the 3M Claw at Costco on sale for under 10 (normally 15.99). Going to hang (again) the artwork I bought my other half. It, unfortunately, decided to fall in the middle of night when the 3M picture hangers quit. It had been over the bed -- I was never so thankful for a middle of the night constitutional.

Fantastic video!

I have a 66" heavy mirror held up with the ook ones with all the nails. You didn't exactly install that one correctly. The slot in the plate goes right where the anchor comes out of the wall. The plate sorta sits behind the hook. The nails although they can be pulled out fairly easy they do actually work very well. I'm gonna give your Amazon ones a try for some smaller pictures. And the anchor that squeeze the center together like a cross actually work very well if a hole is drilled for them vs. pounding them through. That ook wire one is a unique one that looks good to try

That last one, the cobra 90 pound toggle, just note that if there is fiberglass insulation inside the wall, it can totally screw it up.

Good video but….I’ll wait to see what Mathais “makes” b4 rushing out to buy these store bought ones…🤪

At Home Depot here in Canada, I found ones called DuoPower that are awesome! Otherwise, I'd love to find and try your #1 choice.

@ToolReviewZone

2 жыл бұрын

I'll check them out Simon. Thanks for the info👊👊👊

The 3m claw are pretty good for small items

The Claw is the winner for me. I hung a beautiful picture of Steel Panther from M3 on the wall and the Claw worked very well!

@ToolReviewZone

2 жыл бұрын

Awesomeness. Thanks for the feedback Ron!!!

I like the claw but I buy the pack of 3 cause just one M3 cost $5 but the 3 pack cost $11. So you are saving a lil bit of money and they are reusable and made out of quality metal so it's going to last. Awesome video!

@ToolReviewZone

2 жыл бұрын

Thanks for the information and comment J Rod!!!!!

Lol I thought those spot markers for the 3M claws were stupid too (not sure if you were being sarcastic or not lol) then I actually used it on the back of a painting that needed two hooks. Before you had to find out where to center it then recheck the measure. Instead you put the marker on the back of the paintings 2 sawtooth hangers take off the adhesive then place it where you want it on the wall. The marker stays on the wall you draw a little dot then line up the hook and press in. Then hang the picture. Done... so much freaking easier!!

You installed the WallClaw upside down :)

You are friggin hilarious!

Ace video - funny and useful!

Based on my personal experience of 50 + years, I am hooked on the ook Easiest to install, no damage to wall, NO Sheetrock dust, nuff said.

Hi Clint Great video mate I tend to use the ones that made the mess at the back of the plasterboard but instead of knocking them in straight away I drillhole first and you don’t have that problem I’ve tried to click on your link and it keeps telling me page not found that’s for the best drywall anchor I’ve been on to Amazon and I can buy 20 of them for £5.49 which I think is a bit expensive I don’t know how much you pay for them where you’re from Clint but I will give them a go catch up you soon brother 👍👍👍👍🍺

@ToolReviewZone

2 жыл бұрын

kzread.info/dash/bejne/namgr7uFkqrJl6g.html try this one brother and thanks for the feedback 👊

I bought the ones you think are the best and I love them too. Just drive with a hammer and easily removable. However, when I ordered them they were out of stock and took almost a month to get. Aside from the delivery time I also think they are the best.

@ToolReviewZone

2 жыл бұрын

Thanks so much for the comment and feedback Weben! Yeah bro, they sold out pretty fast

@blazayblazay8888

2 жыл бұрын

What are those called btw?

@Webendowed

2 жыл бұрын

@@blazayblazay8888 I'm not sure what they are called but follow the link in the see more section of the video description. It's the one that says best drywall anchor and takes you straight to Amazon site. :)

i have tried a lot of these. I currently use e z lock anchors but I am very interested in your top picks because there are real nass like.

@ToolReviewZone

2 жыл бұрын

Hahahaha, thanks for the comment brother man John. Definitely some cool ones in there

Nice test! But you didn’t include one that you had in the beginning of the video. The strap toggle. The one furthest to the left in the video. Oh, and the link to the best wall anchor takes you to a “something wrong” page. I like the Cobra toggle the best!

Great vids bro !

@ToolReviewZone

2 жыл бұрын

Thanks brother 👊

great and informative vid..

@ToolReviewZone

2 жыл бұрын

Thanks brother 👊

Amazon's got em.

Do you happen to have a subsequent video testing the weight capacity of your favorites to see if their claims are accurate?

Man installs things incorrectly and then calls them crap when they don’t work as advertised 😂

since you last anchor video Swpeet is now my favorite but i normally use the first one and last one the cobra

@ToolReviewZone

2 жыл бұрын

Thanks for the comment and information Michael!!!

Your favorite has some mixed reviews and I see they change the name since I looked at them last week. Use to start with a F (company name I don't remember) now its Swpeet. I like that yellow wall claw.

What is the metal one that you pound in called? Who makes it?

I used the white drywall anchors that you screw in, had a plastic dog kennel come crashing down. The kennel weighs about 40 lbs and there was a couple sleeping bags, a spare wheel and tire to a bicycle and a couple other small items in it, I'm sure it didn't weigh much over 100 lbs! Thankfully no one was home but I was shocked and disappointed!!!

Toggle is my go to for TV mount and shelves for security reasons. You didn't include the plain ol plastic anchors which I have been using for years. They work good enough. Going to try those new ones you top picked but they are pricey. They need smaller packs just to try them out. Good video.

@TheSidneySmith

2 жыл бұрын

I hope you're not installing anything more than a lightweight TV with just toggle bolts....especially if you are using an articulating mount. The only real time for toggle on a tv install is very large / long ones through concrete block or drilled through metal studs.

@pe456nj

2 жыл бұрын

@@TheSidneySmith tvs are lighter than ever now. So far so good. I have one above the other. Anything heavier will require larger and extra anchors for support according to the weight.