Hey! I missed one important part of the video! - How to upload your wifi to the device. If you go to your Serial Monitor, you will see a way to type into the Serial. With your device connected to your computer , type “W” (capitol W) and press enter. It will then pop up a list of wifi connections nearby with numbers next to them. For example, “ (1) mywifi (2) yourWifi . “ Type the number associated with your wifi and press enter. Then add your password and you should be all set!! - Sorry about that 🚀

@starleefox

Жыл бұрын

Thanks that helped!

@marvinterry8654

11 ай бұрын

I was so confused about adding HomeKit without wifi, maybe Bluetooth, no idea... your comment really helps me out

@avnithardia147

10 ай бұрын

Can you please tell me how to add physical switch in this code

@user-ye2sm1sd7g

8 ай бұрын

можно видео инструкцию как добавить вайфай на свое устройство ?

@mutualgarden

6 ай бұрын

Hello, thank you very much for the great video! As an absolute beginner, it has helped me tremendously!! Is there another solution for the Wi-Fi? A solution without Arduino IDE?

Nice video. I used one to bring my legacy home alarm system into HomeKit. It reads the state of all of my door and window switches, so now I get alerts and can set automations based off of door activity.

Great Tutorial. Was looking for something like this. ill check it out...thanks for sharing

This is great! Thanks for making this tutorial

Really Neat tutorial!

Cool and simple

Thanks for the video, really well done. And also the library for that.. when you give people the chance to generate their own benefit they will be creative. And some of them share their knowledge with us. Just wholesome 💜💜

Great video! Would a Ws2812b Strip be able to be used instead of the basic LED in in this setup?

I think I'm gonna build my own DIY smart lock with that. Think about it, all it needs a stepper motor connected to a gear which connected to a shaft that turns the key knob. I know that there are a metric tonne of those smartlocks but most if not all of them are specifically designed for the US market which again most if not all uses deadbolts and have handles outside of the door. Anyway this system has great potentials and I think I can make a prototype then improve it along the way. 🙏

@hrebis2924

9 ай бұрын

good luck with that

@hrebis2924

9 ай бұрын

good luck with that

@RicbordEdits

6 ай бұрын

im thinking of doing the same! how are you doing in the project so far?

This is fantastic. Will you have remote access outside the WIFI network? Also can it provide historical trends and settings? I am surveying this for garden automation monitoring trending temperature ranges

can i make this with the new board arduino uno r4 wifi? it has an esp32 module on it

Hello, your first program with the led is working with bluetooth or wifi ? Thanks

how can I use manual on/off switch for the relay that changes the relay status in the app?

Is there any way to get the remote access for the homekit ? Thank you

Does this work only if I connect it to the local wifi ?

Does this work as IOT accessory or just as a lan accessory

hi bro. Can I do this with my esp with 24ch of IO?

I don’t get how and where you start pasting from for the code.

can i use esp8266? thanks

How to respond to mechanical switches in real scenes

Is the device automatically connected to my home wifi after setting up the device?

Hi. Thanks for this nice vid but can we have a another way to connect esp8266?

Hi, such a great video! Do you know if this HomeSpen could be used to create a PWM led strip dimmer? I have some mono / single color led stips that I’d like to be able to turn on and off. They don’t have the 3rd, green terminal for communication so would require the leds to dim via pulse wave modulations sent via the neg ground and 5v vin ports. So curious.

@phoenix4193

2 ай бұрын

Use wled for esp 32 it has PWM

does this use wifi?

This will works in Android or only iphone

Its not showing up on my Accessory list on my iphone

tôi bị lỗi file LED.h tôi không tìm thấy được file này trên internet

Everything works fine for me, and the ESP32 shows up in my Home app. But after I type in the code, it tries to connect for about a minute and fails every time. Any Idea why?

@phuaouc6886

2 ай бұрын

I am like you, but when I change ESP32, everything is no longer like that, it has found accessories on HomeKit and is controlled. Perhaps the developer is not supported on ESP32 Wroom.

It is recognized by Homekit, but when I type in "1112-2333" it says "The setup code is incorrect". The Serial monitor outputs: *** ERROR: SRP Proof Verification Failed. Any Ideas?

What ios version installed? I’m using 16.5, failed at pairing stage

@taylor.galbraith

Жыл бұрын

I’m using 16.3.1. I’ll update and try it. When you click “add accessory”, are you also clicking “more options”? The device won’t be registered with Apple so we need to force it to add a connection. Also, make sure you’re connected to the same Wi-Fi network.

@rezamuhammad6618

Жыл бұрын

@@taylor.galbraithyes, device already detected after key in pairing code , but can’t add accessories at the end

What IDE are you using? Looks a little different than the arduino IDE

@thehibbi

Жыл бұрын

I heard that they released a new version somewhat recently. Maybe you still have the old one

@TymArsenii

Жыл бұрын

It's Arduino IDE v2.1.1

I got an error while uploading that I am missing "Sodium.h" Library. Any ideas as to what this library is?

@mikekafei

Ай бұрын

Edit: So this doesn't work with the newest 3.0.2 version of Espressif's esp32 board library. I downgraded to 2.0.17 and it worked great!

Hello everyone! First of all, thanks for the tutorial. I don't know how to code. in 90% of the cases, I am a code monkey. Fortunately, I know some electronics therefore I my own board with ESP32-Wroom and 4 relays. The installation, configuration went ok. The problem is that I can't send the "W" command in order to set the SSID and Password. Do you have any suggestions? I tried everything I know. Nothing worked. Thanks everyone!

@taylor.galbraith

Жыл бұрын

Hey! When your device is connected to your computer and you opened the serial monitor, can you run any of the command found in the HomeSpan docs? I’m interested in knowing if you are connected correctly

@P.A.T.

Жыл бұрын

@@taylor.galbraithHi! No! I mean, i see details about the chip bit can’t send commands. The serial monitor is set on Newline, the baud rate is correct.

@P.A.T.

10 ай бұрын

@captsk1109 abandoned the project for a while:(

@videoo24

9 ай бұрын

You do realize - that you have to scroll all the way up to the top line in order to type in and send your commands ? @@P.A.T.

@FPVNZ1

Ай бұрын

Hey man did you find out how to fix this i have read all coments tryed every thing but still can not get any thing to happen when typed W ''W

Please censor talking to Siri in your videos, you’re messing with my HomePod and turning off my lights! 😂

@Ignotus.

6 ай бұрын

I keep seeing this, but really don't struggle with this stuff. Do people not calibrate their Siri to their voice?

How to use it on android??

@T00LF00L

Жыл бұрын

You don’t.

You completely glossed over configuring Wi-Fi via Serial Monitor once code is uploaded to ESP32 board. Took me watching a different HomeSpan tutorial on KZread to realize what I was doing wrong.

@taylor.galbraith

Жыл бұрын

Woah! Thanks for pointing that out! Just added a quick walkthrough in the comments.

Does this also work on the esp8266 boards?

@lvcc11

9 ай бұрын

I was about ot ask the same. From a Github repository, I think it also works but it is generally faster on esp32 module for some reason

@Noah-js5mc

8 ай бұрын

No it only works on esp32, but there are some other libraries that implement homekit for esp8266 but they are not stable at all

Is this only for ios?

@KristofKorcsog

Жыл бұрын

Yes

Thanks for turning my devices off by not muting your hey siri commands. Who does that?

dude you set off my HomePod so many times during this video, please censor yourself next time lmao

@wyattb3138

10 ай бұрын

Mine didn’t go off at all. Voice recognition works I guess.