I thought I recognised that boat and the workshop... Yup, there's Mads & Athena! Great to see your boats progress.
@SootHead3 жыл бұрын
Now I see what Mads does on his day off! Looking forward to seeing it float.
@calvary1808farm3 жыл бұрын
Cement boat guy! Happy to find this in my feed and I’m Subscribed!
@sailingeden98663 жыл бұрын
Enjoyed your video. Thanks for the subtitles.
@alan-sk7ky2 ай бұрын
Concrete Boat Guy! 🙂
@patrickradcliffe38373 жыл бұрын
Nice to see you Mr. Cement boat guy! Have a good New Year.
@michielderuyter60112 жыл бұрын
A lot of work. Respect ✌️
@davidhakes38842 жыл бұрын
If you wish to increase pot life on paint or fiberglass resins put the a and B parts in a refridgerator it really helps in high heat times.
@tomricketts72832 жыл бұрын
Excellent video guys well done :)
@TariqKhan-772 ай бұрын
I have no idea why this iterally showed up in my feed, but now we here, how did the fibreglass hold up ?
@knutarneaakra60139 ай бұрын
Iam a fiberglass boat builder of trade. Note the most inportent thing when working on fiberglass is getting out all the trapped air.using the steelroller until you get a hard dry sound.
@petercholmondeley50838 ай бұрын
Did this. Completely self-engineered heavy CSM and west system, no reference or advice. 35 y o hull on the hard, sandblasted, dried for at least 3 years. SCREAMING FRUSTRATION when rusty salt water bled through matrix within 3 months! First haulout 12 mo after launching quite a few blisters. Subsequent owner removed all, not adhered at all in some sections. 🤨 Just my experience. Remnants of tar epoxy after sandblsting, that's what I blamed.
@Luke-pb9oz
7 күн бұрын
Chop strand mat doesn't really work wit epoxy
@R.E.HILL_3 жыл бұрын
Nice... Have you seen Mads lurking in the bushes looking for opportunities to do some glorious glorious sanding?
@boat_24-7
3 жыл бұрын
I think we can fill him in with all the sanding ha could ever dream of 😁
@johnoflegend15293 жыл бұрын
This just made its way into my feed, it is almost 6 months old. Will we see more videos as you progress ?
@davidhakes38842 жыл бұрын
I Like the music/picking so you can't please everyone. lol@ Burlats.
@tyroneshulace32032 жыл бұрын
looking forward to more content. What model /make of boat is it? When was it originally cold cast?
@sailingsvbohemian1464 Жыл бұрын
I’m a little late for the party . But that’s a nice barrier coat . Who cares if you have to sand blast the fiberglass later . You’d have to blast off 7 coats of just west systems if you used that alone for a barrier coat the next time the bottom is barrier coated . That shit is like sanding steel . Nice job I bet it will last longer than just epoxy.. it’s been two year have you pulled out .
@villacats6790 Жыл бұрын
What is included in the composition of ferrocement cement for boats? Can it be used for roofing.
@rensm7432 жыл бұрын
I have a question how can i make the cement for a ship like this?
@stephenadams97675 ай бұрын
why ??? i dont get it
@hasancanbalay8 ай бұрын
Why did you need to do this? What is the reason of adding 1 more fiberglass?
@paulafrazer-campbell44122 жыл бұрын
Why do this to an already good hull - My Hartly ferro yacht is fine, watertight and 43 years old.
@roberthansen3292 жыл бұрын
3m masking tape will hold that glass up while you wet it out. Then it will peel of easy.
@RodFleming-World2 жыл бұрын
Why?
@marcdepiolenc18803 жыл бұрын
What is the purpose of putting fiberglas over a ferrocement hull?
@boat_24-7
3 жыл бұрын
The epoxy coating is need to waterproof the hull, and we had a few spots where the steel reinforcement in the hull was exposed after grinding of all the old paint and epoxy. This needed to be covered, so we decided that the best way to insure this was to put one layer of 300 gram bx in to the epoxy coat,
@robertcooke1774
2 жыл бұрын
@@boat_24-7 absolute nonsense,if its not waterproof it wasnt cured properly. epoxy wont stick to concrete for long .if your grinding off old epoxy you have a badly built hull .i can see how unfair your hull is, a well built hull will be as fair as any boat. small rust spots are just bad tying ,not too much of a problem.the fairing your doing should not be neccesary if professional plasterers worked on your hull.
@aquious9533 жыл бұрын
If only you could flip the boat upside down to do the glassing
@Robert-nx3uy Жыл бұрын
WHY?
@paulmyoldfella80342 жыл бұрын
3 months later falls off huge bubbles
@paulbriggs3072
2 жыл бұрын
I doubt epoxy will fall off etched cement. Very unlikely. Maybe polyester but not epoxy.
@josealemany4525
Жыл бұрын
You're wrong. I have a boat that had that done 20 years ago.
@jonathansimmonds57842 жыл бұрын
Completely wrong thinking. Please, anyone else seeing this and thinking it's a good idea for their ferro boat, don't do it. They'll find out why one day!
@robertcooke1774
2 жыл бұрын
yes when it starts liftimg off.
@boat_24-7
2 жыл бұрын
Do you have any personal experience?
@bigdog594
Жыл бұрын
@@robertcooke1774 Wow I did mine about 20 years ago.Maybe I should sell it before it comes off🤯😂😂
@DanFreark-ou2ci7 ай бұрын
😂 what a waste of time and money.worse thing you could have possibly done. Insult to ferro cement as a method of hull contruction
@Lyndon2
3 ай бұрын
There is probably a reason they didn't make more videos
Пікірлер: 41
I thought I recognised that boat and the workshop... Yup, there's Mads & Athena! Great to see your boats progress.
Now I see what Mads does on his day off! Looking forward to seeing it float.
Cement boat guy! Happy to find this in my feed and I’m Subscribed!
Enjoyed your video. Thanks for the subtitles.
Concrete Boat Guy! 🙂
Nice to see you Mr. Cement boat guy! Have a good New Year.
A lot of work. Respect ✌️
If you wish to increase pot life on paint or fiberglass resins put the a and B parts in a refridgerator it really helps in high heat times.
Excellent video guys well done :)
I have no idea why this iterally showed up in my feed, but now we here, how did the fibreglass hold up ?
Iam a fiberglass boat builder of trade. Note the most inportent thing when working on fiberglass is getting out all the trapped air.using the steelroller until you get a hard dry sound.
Did this. Completely self-engineered heavy CSM and west system, no reference or advice. 35 y o hull on the hard, sandblasted, dried for at least 3 years. SCREAMING FRUSTRATION when rusty salt water bled through matrix within 3 months! First haulout 12 mo after launching quite a few blisters. Subsequent owner removed all, not adhered at all in some sections. 🤨 Just my experience. Remnants of tar epoxy after sandblsting, that's what I blamed.
@Luke-pb9oz
7 күн бұрын
Chop strand mat doesn't really work wit epoxy
Nice... Have you seen Mads lurking in the bushes looking for opportunities to do some glorious glorious sanding?
@boat_24-7
3 жыл бұрын
I think we can fill him in with all the sanding ha could ever dream of 😁
This just made its way into my feed, it is almost 6 months old. Will we see more videos as you progress ?
I Like the music/picking so you can't please everyone. lol@ Burlats.
looking forward to more content. What model /make of boat is it? When was it originally cold cast?
I’m a little late for the party . But that’s a nice barrier coat . Who cares if you have to sand blast the fiberglass later . You’d have to blast off 7 coats of just west systems if you used that alone for a barrier coat the next time the bottom is barrier coated . That shit is like sanding steel . Nice job I bet it will last longer than just epoxy.. it’s been two year have you pulled out .
What is included in the composition of ferrocement cement for boats? Can it be used for roofing.
I have a question how can i make the cement for a ship like this?
why ??? i dont get it
Why did you need to do this? What is the reason of adding 1 more fiberglass?
Why do this to an already good hull - My Hartly ferro yacht is fine, watertight and 43 years old.
3m masking tape will hold that glass up while you wet it out. Then it will peel of easy.
Why?
What is the purpose of putting fiberglas over a ferrocement hull?
@boat_24-7
3 жыл бұрын
The epoxy coating is need to waterproof the hull, and we had a few spots where the steel reinforcement in the hull was exposed after grinding of all the old paint and epoxy. This needed to be covered, so we decided that the best way to insure this was to put one layer of 300 gram bx in to the epoxy coat,
@robertcooke1774
2 жыл бұрын
@@boat_24-7 absolute nonsense,if its not waterproof it wasnt cured properly. epoxy wont stick to concrete for long .if your grinding off old epoxy you have a badly built hull .i can see how unfair your hull is, a well built hull will be as fair as any boat. small rust spots are just bad tying ,not too much of a problem.the fairing your doing should not be neccesary if professional plasterers worked on your hull.
If only you could flip the boat upside down to do the glassing
WHY?
3 months later falls off huge bubbles
@paulbriggs3072
2 жыл бұрын
I doubt epoxy will fall off etched cement. Very unlikely. Maybe polyester but not epoxy.
@josealemany4525
Жыл бұрын
You're wrong. I have a boat that had that done 20 years ago.
Completely wrong thinking. Please, anyone else seeing this and thinking it's a good idea for their ferro boat, don't do it. They'll find out why one day!
@robertcooke1774
2 жыл бұрын
yes when it starts liftimg off.
@boat_24-7
2 жыл бұрын
Do you have any personal experience?
@bigdog594
Жыл бұрын
@@robertcooke1774 Wow I did mine about 20 years ago.Maybe I should sell it before it comes off🤯😂😂
😂 what a waste of time and money.worse thing you could have possibly done. Insult to ferro cement as a method of hull contruction
@Lyndon2
3 ай бұрын
There is probably a reason they didn't make more videos
Nice pictures. Terrible music.