Two videos in a week! Must be Christmas!

@Ezrider359

3 жыл бұрын

You know it!

Great video, changing all 6 cans on my dump truck today and this was the best information out there.

I like your attitude. Replace it all so you know, and keep your parts inventory as simple as possible.

@david.drambareanu

3 жыл бұрын

I do the same way like you 👍

The most straightforward, easy to understand videos, without all the jibber jabber. And good camera positioning, and explanations. Thanks

YES !!! Another video on old red! You just made my day.

@Ezrider359

3 жыл бұрын

Enjoy!

Sir your videos is always helpful and money saving! Thanks for post

Good video pal, I'm amazed how many young drivers do not know how to cage a brake pot. It's good that guys like you are able to share the knowledge

@Ezrider359

3 жыл бұрын

Thanks 👍

@stevecannard5996

3 жыл бұрын

Drive a truck enough , and your guaranteed to learn , one way or another ..

if you still have the air leak issue pull the orange hose out of the relay valve under the fifth wheel between the abs modulator valves, the factory paints the air line before installing cabs and then plug the line into the cab and the paint migrates to the relay valve and causes air to leak past the oring on the diaphram, excellent job on instructing others on how to properly install a brake chamber, only thing you did not cover is the two hole positions on the scam tube,

I’ve said it before I will say it again Mad Skills!!! I hope you have a bunch of young drivers watching your channel because you are big help to these young guys just getting into the business.Do it right the 1st time and you can’t go wrong.

My other half gets frustrated sometimes when I do a project, and end up replacing brake cans and then that leads to new slack adjusters and air lines.. If it looks like it's worn, it's getting replaced while I'm there. Don't want to take it all back apart in a few weeks cuz I got lazy or cheap.

Awesome job and nice tutorial......I applaud you for just changing them all....I only do the one that's leaking.

I like keeping everything uniform. i also like to start with new brake chambers. at least we know those will be ok for a few years. i like the name change. much easier for me to remember. nice smooth job ezra. have a great holiday!

@Ezrider359

3 жыл бұрын

Main reason I went ahead and changed all of them was because rather than carrying a brake can for on the road repairs I Cary a half can and a pancake gasket much quicker to do in a parking lot should you have a brake can start leaking while you're away from home

@christopherwilliams4647

3 жыл бұрын

I agree %100

Your knowledge of everything mechanical is astounding

For shits and giggles 😆😆 I haven’t heard that expression in ages. Another great informative video. 🤙🏼 Merry Christmas from England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

You are a good teacher. Thanks

Super interesting you’ll be amazed the above details are you described makes a huge difference I kind of found out that our way of mine, but a big hello 👋 to you my friend and thank you for everything and thank you for sharing with us, 👋👌👍👍👍💪

South Main Auto may have an airhammer called "Big Nasty", you have the air gun version of it! Let's call it "Big Bertha"!

Great work Ezrider359.

Famous last words. Definitely true words. I keep trying not to mention how good things are turning out when im working on something

Old red just keeps looking better. I’ve learned a lot watching your videos and that’s helped keep my 76 359 Pete rolling. Merry Christmas from Texas Ezra.

Few months old but I feel your pain. Under there and struggling with bolt that won't divorce the truck...absolute bish! Appreciate the content buddy!!

I like your channel buddy. I run an old 1999 STERLING FORD AT9500 with a CAT 3406 2WS and 18 speed 3.21 ratio diffs.

I really enjoy the way you put the stopper back in the stop so keep on stopping I love it

YOU R. THE BEST. THANK YOU. I HAVE LEARN ALOT. BY WATCHING YOUR VIDEOS. THANK U.

That last big impact tool you use on that nut, HELL YEA!!!!!!!!!!!!!

@Ezrider359

3 жыл бұрын

when your done playing around, come loose or snap take your choice bolt...lol

@Android_Warrior

3 жыл бұрын

@@Ezrider359 👍👌😂😂😂😂🤣🤣🤣🤣🤣💪💪💪💪💪💪💪💪💪💪💪

A good day videos from JC, Ezra and Matt's off road recovery. Y'all have a merry Christmas. I need to add Western Truck repair and Watch Wes Work

When all else fails get the 3/4 gun 😆 Have a merry Christmas Ezra

@raduberaru9369

3 жыл бұрын

Most of the times in my garage...

Nice work brother I'm about to get into mine😅

Been watching this build since the beginning. Can’t wait to see this truck in service!!!!!

Always nice en interresting to wach your video's. Thanks.

@Ezrider359

3 жыл бұрын

Thanks for watching!

Love the put it back together music. 😎 Joy to watch you teach and work professor. Stay safe and God bless you.

@Ezrider359

3 жыл бұрын

Thanks, you too!

I have a long story that i'm going to make short on this topic... when i was young, stupid, and learning things the hard way, i decided i was going to change a leaky pancake in one of these without knowing about that 1700lb spring was in there. I got very lucky and didn't get hit in the face... it hit me in the sternum and completely knocked me out. I was ok after that so hard lesson learned. This was back in the day when the canisters were clamped together. Great Video

@Ezrider359

3 жыл бұрын

ouch!

Good to see you're replacing all 4 .. that's how I do it . No messing around . You know it's good to go to work

I really like your music choices. At the beginning plus the jazz that you chosen for the time laps segments. Thank you for all your videos. I've been following since you bought "Old Red" and have been enjoying them.

It’s a good thing you’re a mechanic you save a whole Lotta money doing it yourself

Merry Christmas Ezra, and everyone else watching this video.

We always use to use zip ties to measure the travel with the slack adjuster

I likes to watch your videos. Interesting

love your videos my man, thanks

am learn with all yours video, idk english but i use translator and learn a lot with you and with my truck, bless you from texas..:)

You just had to say it at 7.25 and jinx yourself. I haven’t watched the rest of the video yet, but if it was me the hot wrench would be coming out pretty quickly. 🤣🤣

I love watching and learning from you. Keep up the good work 👍👍👍

Merry Christmas to you and yours Ezra! Thanks for another kick ass video!

As always, good content Ezra! Happy Holidays!

Great video! Merry Christmas!

I love watching your videos they are so informative and even though I don't own a truck I still like to watch Keep up the great work and I will continue to watch.

Thank you for such a great way to service the brake chambers.

👍 awesome job on your videos and thanks for helping people out

You are a real mechanic and truck builder 👍🏻

Great video on the old red 👍👍

I would agree with your general philosophy that brakes and steering are the most important issues where as most people are concerned primarily with will it start and move and give little thought, until it is too late, to be sure that they can slow, stop and park the vehicle safely whatever the size or type the vehicle happens to be! Excellent clear and detailed video on this topic, well done. Merry Christmas and a Happy New Year to you and all your family.

@brianburns7211

3 жыл бұрын

There lots of truth in that statement.

Ah the good ole famous last words. Love your vids Ezra🤙🏽 have a merry Christmas 🍻

Thanks for the video, and Merry Christmas to you and yours, may 2021 be less of a challenge to us all. Regards, Solomon

Thank u, very well done video.

Brilliant Ezra love your videos especially fitting instructions Alan Northern Ireland 👍

Thanks so much and a Merry Christmas to you and your Loved ones!!!

Have a marry Christmas buddy thank you for your video

Love the videos! Merry Christmas🎄 Greetings from Denmark

@Ezrider359

3 жыл бұрын

Glad you like them!

Nice work man 👍

@Ezrider359

3 жыл бұрын

Thanks 👍

Merry Christmas, Ezra! Watch your head 😮

HEY MAN YOU ARE AMAZING

Merry Christmas sir!

Changed all 5 of my u-joints too. Smooth as glass.

Merry Christmas Mr. EZ Rider!!!

You an your family have a great holidays keep warm an safe

@Ezrider359

3 жыл бұрын

Same to you

Merry Christmas.

Merry Christmas 🎅 driver!🇺🇸

Well done, and a merry Christmas Ezra. Regards from Norway. :)

good job ez !! thanks for the video !!!

@Ezrider359

3 жыл бұрын

Glad you liked it!

You and your family have a Merry Christmas and a Happy New Year

@Ezrider359

3 жыл бұрын

Happy holidays!

@TheDodgeRamGuy

3 жыл бұрын

Thank you

nice informativ video again ez,,you make it all so easy for all us ,keep up the good work buddy....i really like your video's

Very old school my husband does the same thing and puts the caging bolts in his toolbox. Makes using them a whole lot easier when they are not seized.

Merry Christmas Ezra 👍🏻

Like always brother very informative, your friend from Larned kansas Eric Houser.

Merry Christmas!

Wow!!! That truck is a credit to all your hard work. I’ve watched all 37 episodes and loved the ride 👍 wish we had trucks like that in the U.K. merry Christmas and a happy new year to you all from the U.K. 🇬🇧🇺🇸🎄🎄🎄

Good luck 👍

Merry Christmas mon and happy new year 🥳

Very good video boss= muy buen video jefe.

well thank you because you just explained an issue with my truck i been having for months. time to get that fixed

@Ezrider359

3 жыл бұрын

Glad I could help

Great job Ezra, you are a man of skill. Also noticed that you changed the channel name, good call, easier to find your vids for the newcomers. Happy NEW YEAR

Damn good , and the Antisieze a little goes a long way for future work especially when need to get er done , with out takin all day to do this .

Man, old red looks prettier everytime I see her. Nice job on those cans. I agree, makes sense to do em once as a set and be done with it. Less worries and you were already there anyway. Bummer about the vice, but I can't say I haven't seen shit like that before. Can't wait to see the interior go in! You have a Merry Christmas sir!👍😎

good information. merry christmas

@Ezrider359

3 жыл бұрын

Happy holidays!

Merry Christmas pal . I love your video's, you are an inspiration to me. I'm English and slowly working towards my immigration. As soon as i get it, I plan to buy a cabover and start hauling and working on my truck , just like you do.

I think i've watched every EP on the Peterbilt. its a great series. im just starting to restore a couple K100 big bunks and started a channel.. look forward to seeing more from you

Boy do I remember doing brake chambers I hated doing them on my back. But then a company worked for had a pit and that made it easy. Over my 15-year career I probably did hundreds of break cans and a few that were rusty and crusty crunch cage the spring because the damn hole was all rusted out that one was a dangerous can got it off though without hurting myself or anybody else.

Good advice about the cage bolts. When you need them , you don't need to fight with them. Clean and dry is a good way to start . Merry Christmas to all!

Merry Christmas Easy!

Merry Christmas to you and your family

@Ezrider359

3 жыл бұрын

Happy holidays!

ive needed torches most times ive done this task michigan roads tough on things..good job i enjoy your videos

@Ezrider359

3 жыл бұрын

we get our fair share of roadsalt here in nd as well, not quite as bad as Michigan tho.

Great video. If you've been good Santa might bring you a new HD vice. Merry Christmas & Happy New Year to you & your wife,

Another job you make look so easy. I always put anti-seize on the clevis pins cuz I hate it when they seize up either on the slack or the clevis. Not so much on the tractor but on trailers that might sit for a while. I actually found some greasable pins but are a little pricey compared to plain ones...

Merry Christmas Don

Ez! merry Christmas, Hope you are able to get a new vice before the end of the year.

Love the content as always! Merry Christmas! Man I’ve been around trucks since I was born and I’m definitely no mechanic. I can figure things out but wow your content really teaches me how to do things I’ve always wondered. Keep it up please! How did you learn your mechanical skills? Your a great mechanic.

Put Mountain brakes on my truck this week. I only renamed a few things. Brake cans are next.

Well said ,Well Done!! Cheers!!;-)!!

Anyone who is doing this job. Always be mindful that spring in the brake chamber is under an extreme amount of pressure

Great videos Ezyrider. Don't worry about the grippers who make pathetic comments about your work. Most of them couldn't run a cold bath without help. As for the comments about your workshop being untidy. they more than likely don't even have a wood shed. Great work and carry on.