Engraving BAMBOO- Acmer P1
Тәжірибелік нұсқаулар және стиль
DISCOUNT LINK BELOW:
Engraving a bamboo cutting board with the 10 watt Acmer P1. This is another easy project to add to your collection. The cutting boards are inexpensive but make nice custom pieces.
For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers.
www.etsy.com/shop/TheClackShack
Acmer interchangeable jig kit- www.etsy.com/TheClackShack/li...
For Clack Shack shirts, check out my store:
the-clack-shack.creator-sprin...
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
Acmer P1- acmerlaser.com/products/acmer...
12 pack of bamboo cutting boards- amzn.to/3Jlrsno
Пікірлер: 46
Thanks for your content.
@TheClackShack
Жыл бұрын
Glad to do it…thanks
Great video!
@TheClackShack
Жыл бұрын
Thanks!
Your content has helped me so much. Thank you! I have the wecreat vision. Your content has helped me get up and running quickly.
@TheClackShack
4 ай бұрын
Glad to hear, have fun
I have a hand held, rechargeable battery powered air blaster from Amazon. Great little tool.
@TheClackShack
Жыл бұрын
Cool
Good video. I have found when burning bamboo I get a more consistent burn color running cross grain or at 45 degrees.
@TheClackShack
Жыл бұрын
Cool
I have found that if you are working with Bamboo you can get a much better burn if you turn off the bi-directional burning. It takes 2x as long but it looks much better.
@TheClackShack
Жыл бұрын
Cool
Another useful video. Thank you. Just in case this is not on your radar, Etsy had substantial holdings with Silicon Valley Bank. The collapse has impacted them, and I hope it doesn't negatively impact your business. If nothing else, you might want to look into other options for selling your projects and products. Best of luck to you!
@TheClackShack
Жыл бұрын
Thanks
👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎
@TheClackShack
Жыл бұрын
Thanks
I do enjoy your content! I had a thought that if you situated the house with the whole on top, it wouldn't matter how they cut the veggies. I'm thinking I would probably use the other side in either case. That way it wouldn't mess up the engraving and would stay a good-looking display piece in my kitchen. But since I don't know about engraving with lasers, going across the grain might not be the thing to do. I feel certain it would give each word the colorations of different letters, eliminating the effects of the lighter words not being as dark as the others. These lighter and darker words give an unconscious thought to the importance of the words, which you tried to do by using a different font for "Sweet" but since it's lighter it looks like the emphasis is on "Home".
@TheClackShack
Жыл бұрын
That's natural substances for ya. They burn differently, regular wood does the same thing. To avoid grain differences, you have to use select woods.
Another great video. For an inexpensive laser that one looks like it does a really good job. Is your customer realtor by chance? Looks like they might go for something like this.
@TheClackShack
Жыл бұрын
I haven’t had to deal with their customer service.
have you tried borax or Baking soda to even out the color of the engraving ?
@TheClackShack
5 ай бұрын
Yes, it makes a lot of really black soot that will wipe away. Also, borax will stain some woods. I used it a few times and never again. Speed, power, focus and air assist is all I need.
Do you coat with a sealer after you engrave?
@TheClackShack
Жыл бұрын
No, butcher block oil is all I use on food safe products
Do you put anything on the boards after the engraving? Thanks for the video.....
@TheClackShack
Жыл бұрын
If anything, cutting board oil. I wash them with dish soap and water.
@danielprovenzano163
10 ай бұрын
@@TheClackShack Do you use a scratchy brush or just a rag of some sort with the soap and water?
@TheClackShack
10 ай бұрын
@@danielprovenzano163 just a dish brush
is your laser mounted to the honeycomb in any way? The honeycomb I'm using on my little 20w is smaller so i always have to mess around to get the materials aligned straight.
@TheClackShack
8 ай бұрын
No, the honeycomb is made into the enclosure and I use my jig kit to hold the machine in place.
@fullcircleretrospective9913
8 ай бұрын
@@TheClackShack nice! I’ve got the LongerRay 5 20w with a separately purchased honeycomb bed. Maybe my next one😋
Do you treat the bamboo after you engrave it? If so, with what? I was told to use borax? 🤷♂️
@TheClackShack
Жыл бұрын
No,borax is a pretreatment some folks use to make engraves darker. I don’t use it. You can wipe them down with mineral oil after.
What's your final solution in preventing the fire alarm going off. I've disabled it in makeblock software and lightburn settings. Cleand it multiple time without preventing the alarm going off every 30sec. Did wat h your video which was very helpful
@TheClackShack
Жыл бұрын
I assume you are talking about the XTool D1. I went into XCS and disabled mine. There is a setting in there that will turn it off. Lightburn cannot disable it that I am aware of.
@TheClackShack
Жыл бұрын
The setting is under flame alarm, select "do not show again" to disable it.
@oupaswoodshop1325
Жыл бұрын
These settings has been done and no improvement
@TheClackShack
Жыл бұрын
@@oupaswoodshop1325 , what alarm you getting? Look in the console tab and tell me what it says on lightburn
@TheClackShack
Жыл бұрын
@@oupaswoodshop1325 it should have some red text describing the issue
My XTool d1 Pro stopped firing its laser. I GET A Light Blue output . I cleaned the lenses and the Nosel. I am using Lightburn. What do you suggest? I have only used it for less than a year.
@TheClackShack
Жыл бұрын
I would check the outer lens and make sure it isn’t cracked or smudged.
@charlesreicks648
Жыл бұрын
@@TheClackShack It all looks good. Anything else that would cause this. I have less then 25 hours on this machine.
@Fobes
4 ай бұрын
@@charlesreicks648did you figure out what was wrong?
@charlesreicks648
4 ай бұрын
They replaced it.
Burn the image on both faces and it will be both handed!
@TheClackShack
Жыл бұрын
True