Engrave with the Cricut Maker 3 a quick tutorial easy DIY
Тәжірибелік нұсқаулар және стиль
Today we're going to learn how to engrave with my Cricut maker 3. I have purchased utensils from the dollar tree and for $1.25 each I think they're great practice pieces. We're going to learn the ins and outs and make a couple of mistakes along the way but in the end everything seems like it turns out really well.
So come with me and let's figure out how to engrave with the cricut maker 3. This can be done on other cricut machines as well.
you will need the strong grip mat if you have one. strong hold tape. I used painters tape. Utensils or other items to engrave. Cricut design space to make your designs. An explore machine or maker.
Being patient lining up your item for engraving is the key to getting great results!
#cricutprojects
#cricutmaker
#cricutengraving
#cricuttutorial
#dollartree
#dollartreecrafts 
Пікірлер: 73
Thank you SO SO much for showing your mistakes as part of the video. So many people make videos that eseentiall says "Do this, this and that and hey presto here is a result" but when you come to do it yourself its not so simple. For me the mistake is as much of a learning experience as the rest of the video
@kimberlyanndesigns1
9 ай бұрын
I completely agree. It was a mistake that might have been obvious to those who have engraved before. I was clueless. LOL. Thank you for watching.
Thank you for showing the mistakes you made and how your troubleshoot them! So much is a trial and error with new products!
@kimberlyanndesigns1
Жыл бұрын
thank you for watching. it’s always a learning lesson.
Thanks for the video! Thank you for including the boo boo, and how you solved it. :)
@kimberlyanndesigns1
2 жыл бұрын
Honestly we learn more from our mistakes.
I’m so glad to have run across this gem! I really enjoyed the “learn with me, we’ll make mistakes together “ tutorial ❤ Such a breath of fresh air and your willingness to be vulnerable helped me feel comfortable and confident enough to try this myself, unlike the “done this a thousand times so it’s a breeze for me but good luck to you” tutorials that leave me feeling okay about trying it then stumbling and going into freak out mode because they made it look effortless. Thank you for a wonderful tutorial ❤
@kimberlyanndesigns1
6 ай бұрын
I’m so happy you enjoyed the video. I try to show the good, the bad and the ugly sometimes! That was my first attempt at engraving as well. 😀. Thank you for watching.
@nancydepiano3599
6 ай бұрын
Excellent video!!!
@nancydepiano3599
6 ай бұрын
Excellent video! Thank you❤
@kimberlyanndesigns1
6 ай бұрын
@nancydepiano3599 Thank you very much for the kind words.
I’m going to make my bridesmaids gifts!🥰🤩
I'm just trying this for the first time. I use to love to do vinyl and HTV, so here I go.
@kimberlyanndesigns1
7 ай бұрын
You got this!
Thanks for the ideas. I will have to look around our $🌳& see what they have and practice. I am glad you shared your mistakes to help us.
@kimberlyanndesigns1
Жыл бұрын
They will have lots of great items to work on.
Thank you for the information!❤️
@kimberlyanndesigns1
Жыл бұрын
You are so welcome!
This is so awesome thank you for this video! ❤
@kimberlyanndesigns1
Жыл бұрын
Glad you enjoyed it!
This video is so helpful
@kimberlyanndesigns1
2 жыл бұрын
I’m glad you liked it.
hi Kimberly thanks so much for your video really enjoyed it, I found the information in the video to be very helpful as I have just finally got myself a Cricut Maker3 and I got myself the quick swap tool with the Engraving tip and my Knife Blade, so your video really helped me, Once I have got my Machine out of the box. Have you tried the engraving Tip on Basswood was wondering if the engraving tip works on wood, will try this for myself, just got to buy some Basswood, I think I have some Metal Blanks in my crafty stash.
@kimberlyanndesigns1
13 күн бұрын
You’re gonna love your Cricut! I’ve used the engraving tip on Dollar Tree spatulas. I also used it on metal guitar picks. I haven’t done basswood. I’m sure it will work well. Just make sure you use a mm that will work with the machine. If it’s too thick, it can’t go under the rollers. 😊
very interesting thanks im just learning this all and just got my maker 3
@kimberlyanndesigns1
9 ай бұрын
You are gonna love it
I think that what you did was allow the machine to run when it sized the mat and then taped the utensils to the mat. If so, thanks! I will try this one for sure.!!!
@kimberlyanndesigns1
11 ай бұрын
😉 you are correct! Thank you for watching
Do you have a how to video on your cardinal cut out behind you? Would love to make this for my mom as her parents passed away and cardinals make her think of them.
@kimberlyanndesigns1
7 ай бұрын
Great question. I will TRY to make a video for you this next week. If not, it will be soon, I promise. Thanks for watching.
AWESOME video! Just got my engraving tip today! Please slide your rollers out from under the spatulas, they’ll get damaged over time :-)
@kimberlyanndesigns1
Жыл бұрын
Thanks for the info!
Great video! Where did you get that neat little drawer divider for your tips inside your machine? Thanks.
@kimberlyanndesigns1
6 ай бұрын
Cool little item, isn’t it? I found mine a few years ago. here is something similar to it on Amazon. Tool Organizer for Cricut Maker 3 & Maker, Cricut Blade Storage Accessories and Supplies for Cutting Blades, Cricut Machine Organization and Storage Tools, Knife and Blade Organizer (Blade Mod) a.co/d/4FPEaeq Thank you for watching.
What about using the Pic Mat feature? I’ve never used that before but now I’m going to try it.
@kimberlyanndesigns1
6 ай бұрын
I personally have not had great luck using it. I think it’s a feature that needs to be more user friendly. It’s very hard to get it to snap. Thank you for watching
So cool, i use to have a cricut like almost 10yrs ago…. This newer version are amazing. Just wondering if needing to let the machine scan the mat 1st, then having to take it off to put the spatula, wouldn’t the machine want to scan the mat again🤔
@kimberlyanndesigns1
Жыл бұрын
No you can’t remove the mat because when you put it back in, it has to rescan the mat again.
@mitty2575
Жыл бұрын
@@kimberlyanndesigns1 so you're adding the spatula without removing/detaching the mat completely from the machine... Ok, Thanks :)
Thank You so much for this. I've just got a Cricut Maker 3. Can I safely engrave Sterling Silver Dog Tags following your directions? Hugs from Scotland, UK ❤❤
@kimberlyanndesigns1
6 ай бұрын
Yes. I would try using the aluminum setting with “more” pressure. I would definitely practice first. Also, don’t be afraid to go over it twice. When the “cut” is finished and it wants you to remove your cutting mat, DON’T remove it. Hit the PLAY “GO” button again and it will go back over it again. Thank you for watching. Let me know how it turns out.
@Chrissy_Mad-Scots-Wench
6 ай бұрын
@@kimberlyanndesigns1 Thank You. I will, Hun
Thank you for sharing. Coming from Australia we don't have as many choices of tools - could you advise what engraving tool/s you are using so I can source. Again thank you
@kimberlyanndesigns1
Жыл бұрын
Glad you liked the video. The engraving tool is #41. Do you have Amazon or something like that? They sell Cricut accessories.
@jewellerymagic
Жыл бұрын
Yes we have access to Amazon etc. Thanks
@kimberlyanndesigns1
Жыл бұрын
Cricut Engraving Tip + QuickSwap Housing, Premium Carbide Steel Engraving Tip, Inscribes Lasting Design on Glass, Metal & More, Compatible with Cricut Maker Cutting Machine, Silver a.co/d/5dDREMF
So the question is, what file do you save the logo as?, for the Cricket to do the job, and you could of just bend the item, and bend it back after its done...
@kimberlyanndesigns1
7 ай бұрын
If you created the project you can save it as anything you would like. It would be an engraving. You would change a cut file (where you change colors of your project pieces) from basic cut to engrave. I would never try to bend my item. It would probably not bend and it would not be the same when bent back. Also, you might be selling these items and they could lose there strength from being bent. Thanks for watching
@AlfredoCrazyFreddyRivera
7 ай бұрын
@@kimberlyanndesigns1 Thank you... Blessings keep up the good work
Which blade did you use? I need to buy engraving blade.
@kimberlyanndesigns1
Ай бұрын
Its blade number 41. Cricut.com has it on sale this week for $13.99.
Is there a Max high the utensils must not exceed?
@kimberlyanndesigns1
13 күн бұрын
You might have to check on the Cricut website. I know Dollar tree spatulas were perfect. The “harder” the metal, the harder it is to engrave
So I am trying to engrave on dog tags. I am having a problem finding a font that will. Actually, the cricket will actually like write the letter out instead of just like you know making an outline of the letter. Does anybody know what font that might be?
@kimberlyanndesigns1
10 ай бұрын
Find one of the fonts that can be changed to writing. On design space look at where the font name is…next to it says style. Click it and see if your font can be changed to writing.
@kimberlyanndesigns1
10 ай бұрын
Also when looking at fonts to use for your projects, click the two little lines and click on writing and it will show fonts that will be for writing.
What kind of tape do you use?
@kimberlyanndesigns1
5 ай бұрын
I find painters tape works the best.
Where did you get the engraving tip?
@kimberlyanndesigns1
Жыл бұрын
Cricut sells it.
Where did you get that green tape?
@kimberlyanndesigns1
Жыл бұрын
It’s painters tape just like the blue painters tape.
is that the deepest possible engraving?
@kimberlyanndesigns1
Жыл бұрын
I would think you could adjust your pressure on the “blade”. Thank you for watching.
@indigoNine
Жыл бұрын
@@kimberlyanndesigns1 Thank you :)
@tammya9770
Жыл бұрын
If you want a deeper cut, duplicate the design 2-4 times, center designs then the Cricut will automatically engrave the design however many times you duplicated it.
@indigoNine
Жыл бұрын
@@tammya9770 Thank you Tammy :)
Strange wont let me chose stainless?
@kimberlyanndesigns1
6 ай бұрын
which machine are you working on?
What kind of tip did you use? I don't understand why you have so many different Cricut tips. Do you have a video showing more detail?
@kimberlyanndesigns1
11 ай бұрын
It’s the engraving tip. There are many tips depending on what you’re making. What a great idea. I might just make a video of just the tips and what you can do with them. Thank you
I’m always confused when it comes to the tools.
@kimberlyanndesigns1
8 ай бұрын
I hope this helped. If not let me know. 😉