Thanks for explaining aerodynamics for me. I was struggling with that one. Its good to see someone agreeing with me at last. You know where you are with old fashioned magic.

@bodgitandleggitgarage

4 жыл бұрын

👍💪👍💪

The 2nd guy bored me that much I forgot what I was watching

I realised over 40 years ago that steam would decarbonise an engine after seeing the results of failed head gaskets where water had entered the combustion chamber in all instances the effected clyinders where totaly carbon free

Hi, i had it done to my 2002 V6 Nissan, i am impressed with the outcome!!! Reduced noise, fuel consumption improved and the best of all i have more power and speed

Loving the vids mate. Any more carbon cleaning videos in the pipeline?

@bodgitandleggitgarage

3 жыл бұрын

Yes, soon

I think the key is to use it on a regular basis (once a year) to keep things in check / from getting bad.

@bodgitandleggitgarage

6 жыл бұрын

Thomas EXOVCDS yes Thomas it's like everything preventive maintenance is the key as you will no

mate i am a retired diesel mechanic 52 years in the trade worked in africa england scotland and ireland and AT LAST HAVE FOUND A DECENT MECHANIC keep up the good work mate and have a merry xmas and happy new year i live in co sligo may meet you sometime next year. from a old rhodesian ridgeback.

@bodgitandleggitgarage

4 жыл бұрын

Thanks a lot mate no problem hit me up next year

nice one mate i am looking to buy the same machine since i have come across your videos

Hi Leon, As I saw this video when you posted, I`m back now as your video is NO1 in google search regarding "carbon clean" so happy for that. :) Let`s see your recovery van done and no1 on google search :P finger crossed .

Love the vids man. Very informative and well presented 👍👍👍

@bodgitandleggitgarage

4 жыл бұрын

thanks mate

I actually love you... You have been so helpful to me with your videos

@bodgitandleggitgarage

6 жыл бұрын

Paul Hocking thanks a lot mate much appreciated glad my videos have helped you

Can you tell me if this might help my diesel 1.6 Volvo as it’s got a rattle under acceleration but not all the time like on cold it seems ok and idle it will rev up and sound like it should with no rattle. I have heard the injectors could be dripping or whatever but I don’t know. It’s not the injector seals for sure.

I really want to try this on my wife's golf, I think it would help it after 16 years! Do you think it could help with a start up ticking on a Citroen ds3 with direct injection? Its not the timing chain and it goes when warm

Might have to get this done myself. My intake manifold was leaking oil at the back (1.6hdi), I thought it was a seal gone or something. I took off the intake and the whole thing was covered in gunk, all the way down into the head too. It's like the carbon and oil got in under the seals and lifted the intake. It's much better now but still needs a good clean further down I'd say.

hi i just discovered your videos. i enjoy them. keep doing it. i just arrived extracting my toyota clutch without damage.

@bodgitandleggitgarage

6 жыл бұрын

thanks mate and nice job

Bloody awesome 2 finger salute with a bonus raspberry. I freaking love it.

@bodgitandleggitgarage

6 жыл бұрын

Randy the Appliance Guy 🤣🤣🤣🤣

Gary - I have a 20 year old CL500 with V8 5 litre @ 130,000 miles. I keep looking into this, would i notice any difference as im told modern fuels clean the engine.

Great video mate, I would say with advancements in fuel technology and oils too “carbon” build up is nothing like it used to be in the dark days! 10k and a full cylinder head removal and having to de-coke! But as Direct injection has become more prominent in production engines it is allowing build up of carbon. I drive a 2013 M3 and paid for one of these the difference in performance was remarkable 😉👍🏻

hi does my 2006 toyota corolla have an egr valve vvti petrol

I'm doing it on my older model honda. Thanks 👍

Great video thanks brother keep up the great work see you in the next video. I do believe that he has a bigger problem or he wouldn't have taken the engine apart. There is proof that it works.thanks

@bodgitandleggitgarage

6 жыл бұрын

Scott Pearson thanks mate thanks a lot there will be a lot more evidence coming up in more videos

I had of done,defo improve throttle response but after 2 weeks just felt the same or I got used to it not sure..but I did check egr after and it never cleaned it at all

I just wonder again i know absoluttely nothing about this, but some people say when doing a hy carbon engine clean se if a larger bit of carbon breaks loose it can hurt the turbo or dpf filter?

when are you going to do more carbon cleaning?

Does carbon cleaning remove carbon from the air intake? I’ve got a Fiat panda diesel with a clogged up manifold and to remove it is a 4 hour job

good morning. So do you think it's worth it to clean up?

I kept expecting Mrs Doyle to pop in with a cup of tea and a sandwich “go on ,go on ,go on “.

Hi does it clean the turbo plz thanks

You're right. My viral video has been one of my most popular videos. It's called water decarbonization. It can help with some cars. The technique with this machine seems safer, but I'm still wanting to learn more about it.

@johnnyseagull29

4 жыл бұрын

Water only removes carbon from the combustion chamber, which is beyter than nothing. It also removes the oil film on the bores.

I had it done on my 2012 Fiesta 1.25, felt a massive difference, engine far smoother, especially in 1st and 2nd gear, going to do it on my 2017 Astra 1.6 cdti, I was very sceptical at first, but it works, it's only £90, so you don't have much to lose

@bodgitandleggitgarage

5 жыл бұрын

nice to here that mate

Have you ever run your vehicle/s using Dipertane?

Have you got an exhaust gas monitoring machine, the type they use at MOTs? Would be interesting to see before, during and after readings.

@bodgitandleggitgarage

6 жыл бұрын

catnapwat I am going to be doing videos on this to show people the difference before and after I just need more time

@raymondferguson1935

5 жыл бұрын

I might have missed your video have yet done any yet with before and after with the emissions I have recently bought ECC 230 they seem to work but I would be sceptical about cleaning inlet manifolds and egrs but should help remove some of the carbon and also with some dpfs to leave them that they will regenerate hope to hear back from you 👍 sorted lol

@promischristodoulou3681

5 жыл бұрын

Ive done exactly that with mine, mot testing stations used ro refer faliures ro me and id use the machine. Especially good on the old diesels.

Keep up the good work man. Don’t mind the negativity. I personally can’t comment on this procedure I never had it done. Saying that I had a colonic irrigation a short while back, and Boy did it feel amazing... Yes. I saw some stuff clear out that I must have eaten when I was five, I’m like a new born. Now I think I’ll give my Mondeo a treat. 👍

@bodgitandleggitgarage

6 жыл бұрын

Krzysztof Kacprzak hahahahahah

I had this done on my Audi 190bex it did make a difference on pick up from rest

@bodgitandleggitgarage

6 жыл бұрын

nice

Great vid Leon. You can't knock any of these machines untill you have tried it your self I have not seen or used a machine like yours but have used the EDT and terraclean machines at work and if you see the amount of crap the EDT filters out and all that machine does is connect to the oil filter housing and sump plug and pumps a special mineral oil around the eninge and has a fine filter that collects the crap and it amazing how clean the oil stays even in a diesel.

@bodgitandleggitgarage

6 жыл бұрын

Vdubs 60 yes the EDT machine is awesome I'm going to be doing videos on that as well it is amazing just how much crap it remove

@DENicholsAutoBravado

6 жыл бұрын

Even for a diesel? That's incredible.

Hi i would say thats a big impovement for 40 mins going to look.round my local car garages wow great vids

@bodgitandleggitgarage

6 жыл бұрын

Daniel phipps thanks mate

KZread tourette's is a real problem i'm glad your shining a light on such an important issue. lol

@bodgitandleggitgarage

6 жыл бұрын

Bernie Carter lol

Here is a question would this help with thin white smoke? My bmw never had it done 17 years old but I am thinking of doin it seems it does help lot of people

@bodgitandleggitgarage

5 жыл бұрын

White smoke normally indicate head gasket problems so this machine will not help

Would this procedure help with a 2007 a4 tfsi ? My understanding is that direct injection is more prone to carbon deposits.

@bodgitandleggitgarage

6 жыл бұрын

krugerblue yes mate it will it's like everything preventive maintenance is the key if it's too bad this will not help obviously but if you get it done regular enough you'll never get the build up in the first place

I've had the head off an Astra straight after a clean and they definitely work. Good work Leon

@bodgitandleggitgarage

6 жыл бұрын

Jonathan Buckler good to hear mate it's some people no matter what will never be convinced

@hytgggg

6 жыл бұрын

bodgit and leggit garage you've done you're bit and tried to show something new after that people decide what they do with the info. It's like the walnut shell treatment that has been talked about by FRM etc that they use in the USA, we can't just assume it doesn't work because we don't do it in the UK. You can lead the horse to water..........

@bodgitandleggitgarage

6 жыл бұрын

Jonathan Buckler yes mate it's unfortunate but just trying to show people new things but the funny thing is these machines are not new they've been around for a long time but people haven't heard of them oh well lol

@hytgggg

6 жыл бұрын

bodgit and leggit garage it's ok, you can't use a carbon on an electric vehicle ha ha more "new" technology

This video I’ve been waiting for , Leon you legend

@bodgitandleggitgarage

6 жыл бұрын

Brendan Brady fan lol yes I am lol thanks mate

Is hydrogen not flammable? What precautions do you take to ensure it’s safe and doesn’t egbite due to battery exposure just wondering mate not doubting the machine I think it’s brilliant

Does it use HHO???

Well said mate! 👌

@bodgitandleggitgarage

6 жыл бұрын

The rat thanks mate

Just had my Mondeo carbon cleaned with the HHO machine. Power increase was instant. And consumption went down from 5,6/100km to 4/100km. Worth it!

@bodgitandleggitgarage

3 жыл бұрын

Great to hear!

Where is the proof? What is he comparing it to? NO before and after.

@billysgeo

3 жыл бұрын

In general, if you see the word "PROOF" in the title with a thousand !!!!! next to it, there is no proof in the video

@andmetalforall2763

2 жыл бұрын

The proof was showing the valves before & after the clean.

@fatbillslim

2 жыл бұрын

@@andmetalforall2763 at what point did he show the before?

@andmetalforall2763

2 жыл бұрын

@@fatbillslim right at 10:20

i love your vids

After you perform a carbon clean on an engine, where does the carbon particles go? Out of the exhaust valve or does it get trapped in the piston rings? Thanks.

@bodgitandleggitgarage

6 жыл бұрын

din nr it's a chemical reaction and breaks most of it up to very fine particles the rest goes through the exhaust just like it does in normal operation

@user-xm7xj5ss3e

3 жыл бұрын

@@bodgitandleggitgarage it's not phisical mate but phisical .hho generate massive heat which is breaking the charcoal into a tiny particles and will be knocked out of the engine

EXPOSED ! BOOM!!!! ☠☠☠🔧🔧🔧had to see it again ...

@bodgitandleggitgarage

6 жыл бұрын

Drews Auto 🤣🤣🤣🤣🤣🤣

Many years ago I poured 2 liters of water from a coke bottle straight into a very fast-idling carburetor engine It caughted and stuttered and white smoke came out of the exhaust and decarbonized the engine used Redex twice to stop valve stems from rusting.

Not a "Warrior" a fan. Ok whats your opinion on this type of cleaning stuck variable vanes on a 2.0tdi 2009 audi a3? Thanks and where are you?

@bodgitandleggitgarage

4 жыл бұрын

Hi mate it only really works in combustion chamber it might work a little bit help where as long as the temperature is correct but in the combustion chamber is where it works best

I have cured a sticking Turbo on my 20d X type using a DPF cleaner fluid in the tank worked a treat however on the issue of spraying water down an inlet yes it can be done and I have done it using a spray gun ,the reasoning behind this is my experience with head gaskets where steam from a leaking head gasket decarbonises the effected cylinder top of piston and exhaust valve and port .With and EGR system it is feasible some steam may come back through into the inlet side .The upshot being I am interested in these machines if they can produce a superior effect to just steam from which I can assure you is very effective as anyone who as ever dismantled an engine with a failed headgasket can testify

Could this really shift 250,000 miles' worth of oily PCV vapours bonding EGR soot to the intake port walls (Opel Y20DTH, early type with vacuum EGR)? I've removed and cleaned the intake and swirl flap unit and decarbonised them at 190,000 miles (they were BAD) but didn't have time to look at cleaning the ports before I had to reassemble everything and go somewhere! Would like to clean them, but don't see how that machine could. In the combustion chamber, yes. But in the intake? Not sure. The plastic BMW intake was still quite clogged in the video.

@bodgitandleggitgarage

6 жыл бұрын

Simon Parkinson yes mate I know what you are saying the plastic intake in the video was removed two days before this is how he knew how bad the valves was we never cleaned that old intake with the machine it does clean the inside of the engine EGR valve and valve a lot better than the intake yes but it would still help

Need to get it sorted out getting across to u.

@bodgitandleggitgarage

5 жыл бұрын

sorted!!!!

does this also clean out Diesel Particulate Filter?

@bodgitandleggitgarage

5 жыл бұрын

No mate

At the very end of the video he shows the 'before' picture. Kinda backward since he started with the after pic and just talked about the before 'with all the carbon and gunk' then finally, FINALLY you got to see what it looked like. I don't really like the green machine built out of what reminds me of an old computer case, kind of a decent hommage, though so, Respect. I much prefer my smaller scale 2 Pickle Jar setup with a connection to my pickup truck's electrical and air intake via copper wire and 1/8in tubing ported to the air intake / stator vacuum ported somewhere past the MAF sensor and throttle body, nearer to the brake cylinder where suction is most concentrated. I am very happy with HHO.

The system does work and when you understand how it works you will come to realise it can't clean the whole system, for that you really would need to strip the engine down thoroughly clean and rebuild, however it cleans carbon deposits from the combustion chambers and surrounding areas which will have the effect of giving a cleaner and more efficient combustion. It will not be able to clean anywhere else prior to combustion as it is the combustion and the extremely high temperatures reached that burns away the carbon deposits. Oxygen and hydrogen which is really what this mix is can reach temperatures of around about 2000°C which is far higher than the normal combustion temperatures reached when burning a diesel air mix. Because we are generating much higher than normal temperatures, the areas surrounding the combustion chambers and their components will also reach high temperatures as the heat dissipates and therefore could possibly burn away some of their carbon deposits. The exhaust will naturally be much higher and therefore as this is been recirculated through the EGR valve you would expect to see carbon deposits reduced again in this area. These machines are rather expensive when in reality all they are is either a simple dry cell or wet cell. These you can easily make yourself, however, you would need to use as a bare minimum food grade stainless steel. I'm actually thinking of making one myself to generate hydrogen for a domestic hydrogen boiler for the house. I do wonder if you could achieve similar results going down the road of forced DPF regeneration as that relies upon generating increased temperatures to burn away carbon deposits in the DPF. I am not a mechanic so would have to test it. There is no doubt logically it makes sense and will work. It would probably also makes sense to have this done at the same time as a major service, and also change the spark plugs and HT leads for the best you can afford. I imagine this would give you a far more efficient burn with an increase in both torque and bhp. Anyway, that's my two penneth worth. I'm sure there are guys out there would disagree, that democracy for you.

I put about four liters of water through the intake of my jtd engine... Kept revs at about 2.5.. Once it started to bog a bit I would rev it more which would release a cloud of black smoke... All I can say is it would appear this was carbon judging by the smell.. I did this using a pound land pump sprayer.. I would exercise caution with attempting this obviously you don't want to stall it... It was done with a fully warmed engine.. Car is remapped etc anyway but it certainly hasn't done any harm il be doing it again. I also run it on a veg oil mix so hopefully help if any ring gumming has started..

@WASAMSYT

4 жыл бұрын

What does carbon smell like?

@Alexander_l322

3 жыл бұрын

William Ambler-Shaw hot arse burning in the mid day sun

Still wondering what it would do to an mk1 golf in which the electronics literally doesn’t exist. That video nowhere to be found with miraculously increased mpg and power. (Certainly compared to factory values)

Nice one Leon. The only thing I would like to add to this video is that there is definitely science on how planes fly. If you as a plane commander don’t follow that science, the planes would fall down to earth. I hope this comment doesn’t quality me a a keyboard wanker, but if it does, so be it. I’m a wanker anyway and i thoroughly enjoy it. Thank you for posting. Regards Joe.

I agree with you Mr Bodgit. I've used mine to great effect. I got mine which is a sun machine from snap on in about 2005. It's been laid up for a while but I'd swear by it and I'm 30 years in the trade and can remember way back when we did decokes every 50k

I remember when garages used to offer decoke's which back then involved with filling up to the plug hole each cylinder with redex, topped up after many hours and usually an industrious probe used to score the crown to enable the redex to penetrate better. Redex became quite the fad in the 70's as did Molyslip and the later on original Slick 50 (not the useless stuff made today but the real PTFE coating your engines insides stuff) and you would often see redex'd cars motoring about leaving passing white clouds behind 'em and ponging worse than a tart's armpit lol Redex though never got into the valve's that well, often the stems would be still cruddo city and often the flaked off carbon ended up blocking oilways and filter.

@bodgitandleggitgarage

4 жыл бұрын

I still use Redex today as one of the best fuel treatment additives out there I think I use it in petrol and diesel but not in the Way You Are sing nice to know the old tricks thanks mate

Which HHO cleaning machine did he use? There are a few out there... Some must be better than others

@bodgitandleggitgarage

5 жыл бұрын

Hi mate all the links are in the description to the ones I use and the person who I got it off and all the contact information

I want this machine

Always learn a lot from you. Keep it up.

@bodgitandleggitgarage

5 жыл бұрын

thanks mate

Good video 👍👍👍

@bodgitandleggitgarage

6 жыл бұрын

Michael Robinson thanks mate

I gave my Isuzu a carbon clean with a $30 can of Liqui Moly after noticing the throttle body had some buildup, even with half a can through it, the difference in power was noticeable. I have booked a professional hydrogen clean get a proper result.

I had my Vivaro done what a difference, smoother, better acceleration and better on fuel

@bodgitandleggitgarage

4 жыл бұрын

Boom sorted

Am getting mine done in 2 weeks. When cold my turbo lags till 2500rpm then gives me a giant burst of boost with a huge ploom of smoke. Just hope its as good as you say

@bodgitandleggitgarage

5 жыл бұрын

Make sure you get your car diagnosed properly first if it's a mechanical problem this will not work you need to make sure it's a carbon issue before this will work

@SmokeSolo1975

5 жыл бұрын

@@bodgitandleggitgarage Thanks for the advice. My mechanic blanked the egr valve to eliminate the egr system and used compressed air to clear the intake manifold and problem solved. Also have a split turbo boist pipe from egr, but at least no smoking or laggy performance. It shows it must be an issue with the egr system

Must be serious to broadcast from the kitchen 👍 keep videos coming as they take time to do and most people don't realise how much effort is required to do em. ✌

@bodgitandleggitgarage

6 жыл бұрын

5 Minute Man thanks a lot mate it's amazing how much time KZread takes up

I bought a 2008 Vw Passat sport dsg from London. Upon traveling home to IRELAND, I noticed that the 160BHP engine was really preforming like a 110BHP and getting about 32 mpg (28mpg doing 80mph on motorway to Dublin). Upon checking the DPF was almost fully clogged. Got that cleaned. The mpg improved a little. The diagnostic is telling my mechanic there are no problems. I’m now thinking it must be Carbon given that the mpg and power is only a little better that the car spent its life most likely in traffic. What are your thoughts? Is this treatment available in ireland (Cork area if possible)?

@bodgitandleggitgarage

5 жыл бұрын

Hi mate what you really need to do is get it diagnosed properly because I carbon clean will not help if you've got other issues no point wasting money on something you don't need to get done you will also then think the carbon cleaning machine doesn't work if you've got another issue get it checked properly first before you get anything done

what on earth are you guys on about? I give up, get to the point.

BEST VIDEO EVER

@bodgitandleggitgarage

5 жыл бұрын

THANKS MATE

Next you'll be telling us the Earth is round 🤣

@bodgitandleggitgarage

6 жыл бұрын

Badgertronix I don't know how you guys can live on the other side of the planet Live upside down if I try and come to you or fall off the lol

SORTED! 💙

@bodgitandleggitgarage

6 жыл бұрын

PSK PERFORMANCE 😁😁💪💪👍👍

So does terra clean work?

@bodgitandleggitgarage

6 жыл бұрын

MrYeshood hi mate that is a different system to what I use I have not seen it or used it so I cannot comment on what it can and can't do

Thank you for your advice.. I'm having issues with my focus. Definitely going to find a garage near me.. I'm having loss of power.. grunnting noise from engine! Wanting to stall. Blackish smoke. No warning lights etc.

@bodgitandleggitgarage

4 жыл бұрын

Hi mate, make sure you've got no mechanical issues a carbon clean will not work if you have mechanical issues. That's the problem people think it will and that's why the machine gets a bad name.

@fourlegsandatail7882

4 жыл бұрын

@@bodgitandleggitgarage hi. It's been on the on computer no error codes no warning lights nothing. It seems to EGR VALUE not opening or closing probably. An when it stick I loss power black smoke but again no warning lights. So there's a blockage with carbon it makes sense everything you said in the video what's happening with mine. My focus is 16 years old. And done 140354 miles on the clock. And when she goes she goes.. so I do think a good clean would help.. my partner been at me to get it sorted.. so it's booked in for the end of the month and go from There is my best bet. Thank you for replying back

@bodgitandleggitgarage

4 жыл бұрын

@@fourlegsandatail7882 Does make sure you've got definitely no issues, and if it is carbon.Carbon cleaning will help But when a car comes in to me, I check it out for the first just to make sure it will work.

@fourlegsandatail7882

4 жыл бұрын

@@bodgitandleggitgarage the guy who going to check it over first asked me if it was okay to check everything first etc. I said to the guy that's fine with me. I'll let you know at end of month etc. Thanks

@bodgitandleggitgarage

4 жыл бұрын

Yes, let me know how you get on would be really interested to find out.

That 11 minute I won't get back

Ma bucur sa aud aceste de la tine iti urmaresc cananul de youtube si apreciez munca pe care o faci. Intamplator am si eu un aparat de genu si este businesul meu aici in Romania. Exact de acesti "experti" ma bat si eu zilnic. Big LIKE!

I’m confused Is a carbon clean good or not

@fluggaenkoecchicebolsen

3 жыл бұрын

Me too - the guy was so Irish I have no clue what he was talking about. I’d say it doesn’t work and this is a parody of some kind maybe?

I had a 1988 BMW 320i, had it carbon cleaned at about 120k miles- I honestly thought that a new motor had been fitted!

@bodgitandleggitgarage

5 жыл бұрын

sorted

With the heavy oil engines you have to strip the air in take and clean it propely that wont even touch the sides

@bodgitandleggitgarage

4 жыл бұрын

Not necessarily if it's gone too far then yes the only way is to strip it and clean it but if you use this as a preventive maintenance you will never have to do that

@garethfloydevans861

4 жыл бұрын

@@bodgitandleggitgarage yea can see but what i done to a my passat is cleaned it all out but that breather off top of engine i run in to a cach then back in to the front air in take .. mot guy is like fk wers the smoke lol

do you do a mobil service

@bodgitandleggitgarage

5 жыл бұрын

no mate

Most of the ones saying it doesn’t work are mechanics that would prefer to charge a customer a lot for labour that this machine can stop within an hour or so , I know as I was one of them sceptical ones at first , 50-90 quid for the hour roughly compared to how many hours stripping an engine to find the issue, my customers have been happy with the results and the savings in costs and time so to me that’s worth more than stinging them for a few hours labour and saves me the hassle of stripping down the engine if I don’t have to, as you say it won’t always work but it’s worth a try before having them forking out hundreds . Done approx 25-30 cars with mines all of which have had good results one way or another from egr, dpf injectors, seals and mpg increasing , If you don’t trust it don’t use it but don’t diss what you don’t know as I found out , probably make more from this than I do repairs now and costs a hell of a lot less for the customer, also depends on machine and chemical mix used in the process too

There is a reason why when you do a head gasket the area where the failure is has zero carbon in that cylinder.

@FrankGutowski-ls8jt

5 жыл бұрын

Scottish Outdoors It’s the ethylene glycol that cleans.

LOL well said sir !!

@bodgitandleggitgarage

4 жыл бұрын

lol thanks mate

Hi, I am a Bryan...I am looking to purchase a G7

Hahahaha Nice one Leon 😊👍👍👍I can't wait to see the 2ltrs of water in the intake as it causes Hydro Lock and Bends the ConRods..Let's hope one or two of the Keyboard Yankers come back with a Video of it and gives us all a good Laugh.....By the way Leon the Steel Seal has Sorted my Coolant leak and Hydro Lock Problems 😊no idea how long it will last but blow me down it actually worked..Thanks for the Laughs.

@bodgitandleggitgarage

6 жыл бұрын

Steve Jones hahahah I must admit I can't wait to see that too

@christiankoppl7721

5 жыл бұрын

You guys need to understand the difference between hydrogen and water (H2O). Hydrogen is a gas not a liquid . The Hydrogen cleaning system works with a unit that produces hydrogen by splitting the H2O molecule with electricity thus producing hydrogen which is highly combustible and will bind with carbon and break it down (hydro-carbons). Putting water in your intake is definitely NOT recommended.

Nice...thanx for the vid mate...could of used this machine today...wonder if they have something similiar or even this very machine available here in the states.

@bodgitandleggitgarage

6 жыл бұрын

Drews Auto yes mate I'm sure you can get these machines over there they been around for years it's not new a lot of people think this is a new technology that's why they are sceptical just like when medicine was first invented people didn't think it would work but I told you it does and keys now no that works as well

Leon ignore the keyboard w*****s, I always watch your vids for honest impartial advice, keep up the good work‼️

Much dose it cost to get done?

@karlmeadows4986

5 жыл бұрын

Between £80 and £50

Unfortunately you can't please everybody mate and some have to make their own experiences but making peeps aware of what's available is very generous of you. Nay sayers don't learn🤷‍♀️ I'd be interested in doing this to my landrover with 220.000mls on it to see if it helps. Yes, landrover not jeep😉

Wallpaper stripper, the steam clean the carbon right out your car. Jst make sure u insert the hose behind the mass flow air meter keep the rev between 1000 1500. Run for 20minz done.

No physics in how planes fly? lol.

Just took my car in to get it done good video will report back the results

@Alexander_l322

3 жыл бұрын

Is yours diesel? And how’s it going now??

So it will clean the carbon , not only from combustion chamber? Also from the intake side ? Waiting for more videos .

@bodgitandleggitgarage

6 жыл бұрын

Dom's Garage well you're going to enjoy the next video because I'm getting live scan data and you will see the improvements as the cleaning process goes through and if this is not enough evidence for you then there's not much more I can do

@zwloki0

6 жыл бұрын

bodgit and leggit garage i will stay tuned ;) in your wast drawer of gadgets you must have borescope :)

@bodgitandleggitgarage

6 жыл бұрын

Dom's Garage yes I do have a borescope and like I said in my last video I am going to use it when I can do it easily and handy I did say this in my last video and I also said it in the first video on this machine

@raymondferguson1935

Жыл бұрын

Any new videos yet thanks

I reckon if you had this done every 30 or 50.000 would keep the internals cleaner

@jrea424

4 жыл бұрын

Daily driving a car with a blast up the motorway will keep it tip top, regular oil changes also help

I've heard nothing but good things from carbon cleaning especially with diesel vehicles.

Hydrogen engine carbon decoking works wonders!

How much LPM OF hho gas to be fed per engine size?