[Eng Sub][mini4wd] How to build up 3-Lane Special Machine
Автокөліктер мен көлік құралдары
I haven't been able to make a 3-lane dedicated machine, so I tried it.
This time I will explain how it is made.
I made a full cowl machine by myself, which is quite interesting.
Next time, I will explain how it works while running.
What's the difference with 3 lanes in the first place?
I think it's difficult to understand, so...
Пікірлер: 24
thank you for the share 🙏🏻🙏🏻, i like everything except the pink color hahahaha 😁, but its still a beautiful car 👍🏻👍🏻👍🏻
Verry good
Good
@AZARASHI3ODN
4 жыл бұрын
Thanks♪
good!!!!!!
SUGOIIII!!!! 😍😍😍😍😍😍
Sensei, after a few test run i just noticed my rear roller stay looks like a bit bent foward / positive angle on my anchor bumper, what am i doing wrong?
Sensei, i got a lot of tamiya Y spoke carbon reinforced wheels from a friend, i noticed that this set of wheels is wider on the rear. Can i cut the tip of the rear wheels so it will be at same length as the front? Bad idea?
@AZARASHI3ODN
3 жыл бұрын
Unfortunately it's a bad idea. There are fewer paths for the shaft. It becomes fragile.
Please show us how to make thos modified body
@AZARASHI3ODN
3 жыл бұрын
I will make the same type of body on the next machine, so I will explain it there.
Cam you post a video on how do you make those front & rear bumper? Thanks
@AZARASHI3ODN
4 жыл бұрын
Please see around 3:16 for the front bumper. The rear has only one straight plate.
how to make azara system? thanks
Sensei what is the ideal diameters for rear anchor mushroom hole? My rear anchor seems too stiff and didn’t work perfectly, someone said my mushroom hole aren’t big enough, but idk for sure at what size it will be effective
@AZARASHI3ODN
3 жыл бұрын
The size is such that the head of the mushroom pops out a little. Also, scrape off the protruding head and flatten it.
@heheyeaaboii4358
3 жыл бұрын
@@AZARASHI3ODN thankyou sensei! This is my 3rd time trying to make a perfect anchor bumper, with your help i finally did it,i wish i could show you.
@heheyeaaboii4358
3 жыл бұрын
Do you have a video about ground clearence and brake settings?
@AZARASHI3ODN
3 жыл бұрын
@@heheyeaaboii4358 I don't have it now ... I'll try to make it if I have time.
can u tell me the benefit putting double roller in the upper shaft n not stabilizer, sir?
@AZARASHI3ODN
3 жыл бұрын
Since it is a roller, there is little friction. You need to hit this roller against the wall at the corner to press against the chassis. This stabilizes the machine.
@andyandrew1286
3 жыл бұрын
@@AZARASHI3ODN will try this setting in one of my kit lol
Good video do you have facebook account?