Nick would love to see you Raptor Line your jeep I guarantee you'll Love it man

Glad you are back Nick.

2 vids in one day? Holy smokes. Glad to see you back buddy.

You should check out your steering box. With all the heavy wheeling it might have cracked the unibody/frame rail where the box bolts to. If so it will shake like an epileptic in a strobe light.

My 99 wj project with the 6.5 in.lift has the death wobble. But due to work all projects have been put on hold. Hopefully soon it will slow down soon. Great video Nick.

Just want to say thanks, your guidance helped me with the MANY issues on my old XJ. Have you ever considered starting a ZJ project next?

Went to bed and couldn’t sleep. Get back up and another video!! You are setting expectations Nick! 😂 ❤️🐞

@NickInTimeFilms

5 жыл бұрын

I wouldn't count on it haha.

Just seen this jeep at the blue pig this evening . That turn signal need some attention

@NickInTimeFilms

4 жыл бұрын

Hahah, yeah it blew off on the highway. Need a new bezel and marker cover.

I worked for along time trying everything to solve my DW on my XJ. It probably all helped, but what made it go away finally was new tires. Unfortunately, the cure seems to be slightly different for everyone.

check your ball joints when my 96 xj gets the wobbly D 99% they are my problem. jack the front end up and stick a long pry bar under the tire and lift up and see if you have any play in between joint and the knuckle.

Hope you figure it out soon... How about a video on the difference between Renix and non-Renix Jeeps? Have a great day...

@etulosbaakdov1756

4 жыл бұрын

☝

Nice job Nick,too bad it didn't solve your problem.Hopefully that will be another video.

subbing for the diagnosis/fix

Have you checked the splines on the pitman arm to steering box? I had a rough country 1in drop arm and the splines became loose. Add a axle nut washer to the pitman arm nut so the nut doesn't bottom out before the splines are tight.

Safety glasses my man. Pls!! Springs are highly unpredictable. safety first then teamwork. Great video

I have the same Trac-bar. Bought the first model second generation with the "big rubber joint". Rubber bushing lasted about two years and then I ordered the Johnny Joint end. Been about 3 years and no play. I will say, the polyurethane joint on the axle side is garbage and I've yet to find a bushing to replace it with.

@camaroboi13

4 жыл бұрын

Moog K3147

Hello, is it OK to feature your clip in a my chanel for educational purposes (so-called temporary copyright.)? You can stop me from using your content at any time and it will be deleted immediately. It will be credited in the description & comments section with your name. Thanks, MM

That wobble might be coming from a wheel bearing. The same symptom was happening in my cobalt. Even if the tire is solid when you shake it, the problem still may be the wheel bearing. I would have your friend drive beside you and record the front tires on each side of the truck. If you can see that one tire is shaking more violently than the other when the wobble occurs then it is probably going to be the wheel bearing on the more violent side.

i.d check the other end of the track bar.. barnes sells the axle end also.. ive had to replace these on a few jeeps www.barnes4wd.com/Jeep-TJ-LJ-MJ-XJ-and-ZJ-Front-Axle-Track-Bar-Bracket_p_818.html

Ha "lube her if you lover her" im taking that

Damn dude, I just watched the install video you made with this track bar setup! How many miles on this track bar?

You should do another death wobble video after the bushing rebuilding. I saw your pitman arm and steering box shakin like crazy in the first video. Just wondering also. Is there a moment when doing any mods that you suddenly got wobble or has it been a gradual oncoming thing?

@NickInTimeFilms

5 жыл бұрын

I'm recording and I go and may have something to show. Replaced the box with no luck. Doing ball joints Now.

Nick make an under ground garage for all your cars like I said that one time! Edit: Can you pin this comment please if you think you can do it

If'n ye install power assisted rack n pinion steering off an 02 Jaguar hit'll solve all yet problems! They do that in Oz ... It'll fit with a few bangs of a bfh!

@tassie4x499

4 жыл бұрын

Any links to an article or vid or forum story ablut this mate, very curious...

I had a 1998, with 35" tires.. and 6.5" lift? And I experience death wobble once. I was not a fan. I never took it on the highway again. Now I own a stock Cherokee, with as big of tires as I can fit stock. I am happy.

You know start from the outside in. Lug nuts, hub bearing, ball joints,....you will find the issue. Lastly make sure you still have the right camber angle.

@marcusmichols1516

5 жыл бұрын

Dorsk84 caster*

Enduro Joint Poly Cup Part Number 9308G Enduro Joint Snap Ring Part Number B4WEJSR Moog Track bar bushing Part Number K3147 That will do the whole track bar on both sides... ask me how I know lol

@camaroboi13

4 жыл бұрын

To be clear you need 2 cups at $2.50 each. The snap ring is 90 cents, and the track bar bushing is $9.77 on Amazon. Barnes4wd charges 8 bucks for shipping, so you’re looking at 24 dollars to rebuild the whole bar. Cheaper than a 130 dollar track bar. Costs about 15 bucks for a machine shop to replace everything if you don’t have the right tools. Hope this helps 👍🏻

@NickInTimeFilms

4 жыл бұрын

Awesome stuff! Thanks for the part numbers.

@camaroboi13

4 жыл бұрын

@@NickInTimeFilms It's the least I could do considering all the help you've given me through your videos. My 87 Pioneer is coming along nicely thanks to the wonderful world of KZread.

19 yrs in my 98ZJ I just upgraded my steering from Ironman4x4fab to tons for my daily driver. First time I ever had death wobble problems. Their kit is cheap but strong. The instructions had incorrect measurements in them causing me to buy the wrong reamer. Im not going with them again, instead I will go with companies that put some effect into service.

Ball joints 😁

@NickInTimeFilms

5 жыл бұрын

That's about all that's left at this point.

did you try rotating your tires?

@NickInTimeFilms

5 жыл бұрын

Yep. Got rid of some more generic rolling wobbling, but thing still takes off on the right bump.

@artardFTW

5 жыл бұрын

@@NickInTimeFilms I'd take it to a shop and have them rebalanced, and your alignment checked. everything can be tight but alignment fighting itself will wobble almost every time

Dude please wear safety glasses at the press. I'm not a safety Sally but c'mon eyes don't grow back

@LittleMikeStarCraft

5 жыл бұрын

Should always wear safety glasses, tbh.

@mwilliamshs

5 жыл бұрын

@@LittleMikeStarCraft they fog up in the shower and get uncomfortable in my scuba mask and always come off in my sleep

@LittleMikeStarCraft

5 жыл бұрын

@@mwilliamshs KEEP THEM ON, THINK OF YOUR CHILDREN. I heard if you make babies without eyes, they will be born without eyes too.

@mwilliamshs

5 жыл бұрын

Thinking of your children makes me think mine won't be so bad off with no eyes

first?