Fantastic review mate, you did a great job at remaining as objective as possible. It’s so disappointing when a product has inferior aspects, and installation workmanship is no exception. Thanks for letting us all know your experience.

@XploringOz

2 жыл бұрын

Cheers mate, glad you enjoyed the video. I hope its able to provide some insight and awareness to others considering a product like this. Cheers, Nathan.

Thanks for that review , I have been thinking about getting one for my Sahara , I will pass now , if someone had cut my plastics like they have cut yours I would have been gutted , you are so right about the coast , it should come with finishing trims and have a quality locking system , I feel for you ,

@XploringOz

2 жыл бұрын

Cheers mate, well at least I was able to help you make a decision for your vehicle. It's very disappointing, as the functionality of a product like this is absolutely awesome.

Great review mate. Love the quality of your content, and balanced unbiased reviews.

@XploringOz

2 жыл бұрын

Cheers mate, glad you enjoyed the content.

Great review These so called professional manufacturers and or installers should be made known because they do charge a premium for their product or services and provide rubbish to the consumer.

@XploringOz

2 жыл бұрын

Thanks mate. There are a couple of reasons as to why I don't publicly name the business here. There needs to be robust factual tests based on fact that assigns the blame. Although personally I know this to be the case, I lack the official tests and immediate records to pass this blame onto the installer. The views expressed in this video are only my opinion on the product and installation. I hope this makes some sense to my reasoning.

Great review thanks I’m getting some ideas for my troopy

@XploringOz

2 жыл бұрын

Cheers mate, glad it was helpful. Cheers, Nathan.

Great reviews for 200s as always mate 👍

@XploringOz

2 жыл бұрын

Cheers, thanks mate.

What a mess I know I would have regretted getting one fitted,thanks so much for the review. 🍻

@XploringOz

2 жыл бұрын

For sure, not exactly what I was hoping for... Cheers mate.

Sorry my OCD could not handle the install of that wing. The black silicon around the frame very rough, the gaffa tape down the C pillar, the way they cut the inside trim. only one thing i would do now ! BURN IT (sorry )

@XploringOz

2 жыл бұрын

For sure, not a great install at all. Hopefully it can provide some awareness to others considering this product...

Bugger, that went south ! Sorry to hear. The so called installer should have looked at Terry‘s vid to get it right. Getting the sika flex correct is also no rocket science just choose the correct product and kilometers of experience. Cheers

@XploringOz

2 жыл бұрын

For sure, Terry did a great job installing his own and maybe my installer should of learnt something from him before working on my vehicle...

Great video man! 👍

@XploringOz

2 жыл бұрын

Thanks mate, glad you enjoyed it. Cheers, Nathan.

Awesome review buddy well done. I was thinking of getting one but not finished like that and with those crap locks, it’s the same trouble I have trying to open up my cheap Chinese made Ute canopy.

@XploringOz

2 жыл бұрын

It sure is a debatable product. The functionality is great, the quality and fitment, not so much...

Thanks for the heads up & a very well presented review. I too was looking at this for ease of access but will now likely pass. I too would be pissed with the quality of the fit.

@XploringOz

2 жыл бұрын

Hopefully this video can provide some considerations for others looking at a product like this. The functionality is great, the execution... not so much.

Great details review agree with everything u say paying premium price for that quality and fitments is abit not happy

@XploringOz

2 жыл бұрын

Definitely, some innovation and new designs are needed to keep this company alive.

Great review, insightful and honest. I will definitely not be installing one of these.

@XploringOz

2 жыл бұрын

Thanks mate, appreciate the comment and glad I could provide some insight. Cheers, Nathan.

Thanks for the review- caveat emptor

like your honesty as per usual

@XploringOz

2 жыл бұрын

Thanks mate. Too bad the products wasn't so great this time round...

Great Video Nath!!! Thanks for sharing your thoughts. I did contact an overseas company but they did not make the gullwing for the LC200. I just can't go past how permanent this mods is and those hinges and the amount of space they need. The price of the product only is only half of the story that has to be compared against the quality of the built of the product. Furthermore could you please let us know your thoughts on using the access to the car while actually 4wding. I can see @ 1:42 that you still need to lean against the car to grab your item but that was a spotless car. It could be a bit different when the misses need to grab something from a totally mud up car 😉. Cheers

@XploringOz

2 жыл бұрын

Thanks mate. I'm sure it's only a matter of time before another company produces a similar styled product with better execution that will dominate the market. It terms of accessibility, yes its a stretch, but keep in mind I'm running a 2" lift with 34" tyres, so the vehicle is high. Further the item I was grabbing was sitting within the fridge slide of the vehicle (so quite low down). I have a specific project being installed in this area which will change the way I access gear in this area. That video will be coming in the next few weeks... hopefully. Cheers.

Yikes! Thanks so much for the review, I had been thinking about these for my 100 series, you have helped me make that choice! They are pretty costly too.

@XploringOz

2 жыл бұрын

Hmm, yeah definitely some things here to consider. Look, don't get me wrong the opportunities this kit has opened up in terms of the plans I have for behind it are awesome, it was mainly the execution that put me off...

Excellent vid, thank you for always posting the truth. I'm on the fence, with a rear bar I could use the access, but just like you I am meticulous with my 200 and install only the best quality products. I would be gutted if it ended up like yours. Also as it's on your drivers side, it's a constant reminder everytime you get in.

@XploringOz

2 жыл бұрын

Cheers mate, honest as much as it was painful... Yes, I hear what you are saying and this was why it has taken me so long to get around to doing this. I'm hoping that the modifications that I plan on doing to accompany this wing will make it somewhat worth it. Cheers, Nathan.

@moto4x4adventure9

2 жыл бұрын

@@XploringOz for sure, I paused on your pic during the vid, looks awesome. I plan to run a DC85 bushmans upright at the back with drawers, then a 15L Roadie behind the DC85, so the emu wing was going to allow that access. Keen to know if Emuwing end up contacting you. Also 5% off returning customers if you choose to go a second...

@XploringOz

2 жыл бұрын

@@moto4x4adventure9 Yeah, it should be a good little build and addition to the rear of the cruiser. Nice! Sounds like you will also have an awesome setup there! Nothing at present and I'm not holding my breath, but we'll see. Haha, I will not be going another one...

Oh Dear...that is one botched installation. Mate I feel for you. Thanks for sharing your experience. Have you approached and had a response from Emu Wing. No manufacturer should ignore such an honest assessment.

@XploringOz

2 жыл бұрын

For sure, either way its something I have to live with at the moment... Negative, have not made contact with EmuWing at this stage.

Nathan, I’m Pedantic with my gear so I feel your pain. I think I know what you are going to do with your mod behind this wing so focus on that as it will be so tidy & very functional. As far as vehicle security goes, good crooks can get into any car in second (emu wing or not) & useless crooks take even less time with a rock. I think your mod behind the wing will really deal with the security aspect. Maybe it’s worth the time & effort to clean up some of the finishing aspects of that installation, I don’t know, Im sure you’ll work it out. It’s good to see someone out there providing honest reviews 👍

@XploringOz

2 жыл бұрын

For sure, it was very disappointing, but hey that’s how it went. I’ve left it for the time being as it’s holding up and doesn’t leak (dust or water). But if it does, it will need some love and attention. Like you said though, the space I created behind this is awesome. It functional and versatile and takes my mind off this installation 🤦‍♂️

@GR8Tmate

2 жыл бұрын

@@XploringOz Listen Brother, It’s the bad things that pop up from time to time that make us enjoy the good things even more. Whenever that little blemish catches your eye turn your head the other way & look at ur beautiful family. Besides which at the end of the day you really have an awesome truck & many people will never own something that great. You’re going to keep modding stuff to suit yourself & all that will far outweigh one little stuff up. Next challenge will be getting the new van & going right through that over a few shakedown trips to make sure everything is as it should be. Sadly, I hate to say this but the Caravan industry in Australia has a squillion & one shonky operators. Make sure you document EVERYTHING when it comes to the van as some of the people in that field will make the emu fitter look like a master tradesman 🤣. These days Consumers really need to be on their toes at every turn. Remember, photograph EVERYTHING & put Every communication with the Van people in writing. Familiarise yourself with the consumer laws in your state. Don’t leave anything to chance as you will find with many of these operators do battle with consumers every day & know all the tricks, meanwhile consumers only do this a few times in each life. Anyway, I will jump off my soap box now, but rest assured we will all get our chance to deal with these SHONKS at one point or another. 😉

@XploringOz

2 жыл бұрын

@@GR8Tmate For sure mate. I hope I don’t sound ungrateful in these videos. Theres not a moment that goes by that I don’t appreciate how lucky I am to have what I have. A healthy and happy family getting out and doing what they love is all anyone can ask for. To say that I can't wait for our new van is an understatement! I've spent a huge amount of time deciding between companies and picking the perfect van for our family.y I can't wait to share is on the channel! I'm confident in the manufacturer I've chosen, but there will always be little things...

Sorry to hear your experience mate, but I believe fitters like them should be named. Just so that no one else falls for them and their fake reviews

@dustyfarmer

2 жыл бұрын

The Emu wing fitter's most likely follow pre-designed patterns or cut-outs.

@XploringOz

2 жыл бұрын

There are a couple of reasons as to why I don't publicly name the business here. There needs to be robust factual tests based on fact that assigns the blame. Although personally I know this to be the case, I lack the official tests and immediate records to pass this blame onto the installer. The views expressed in this video are only my opinion on the product and installation. I hope this makes some sense to my reasoning.

I know this was done over 2 years ago, and I had mine installed 'professionally' which ended up with an insurance job to fix the installation. I will say I love the wings, and recently changed my seals to a Q Seal on the body and I find it better than the two part seal they supplied then. My question to you is... did you reconnect the DAB antenna at the rear, or connect it to the back of the head unit? Would love to know as hard finding any useful information. I find the EmuWing product team very lacking in there post-install product knowledge and 100% agree with your review. Hard to find a good installer and the product could be improved, especially with the glass.

I agree, had all the same issues except the black silicon on mine was done well. Complete alignment was poorly done and the seals were bugged within a couple of weeks. Mine have been on not quite 2 years, powder coat has come off the black exterior mount plugs and handles are a mission to open as should at least be a t bar style. Seals are rubbish and need addressing. One thine to note an external Ariel is required as ours is in the rear glass. So for me also am on the fence with my emu wings

@XploringOz

2 жыл бұрын

Yeah mate, sounds very similar to my thoughts on this product. The functionality is awesome, the execution and quality is not...

Installed one in my 100 series and love it it lets me access next to and behind my fridge. Did the install at home and it looks a lot better than that. But can’t agree with the locks comment, mine never jam and lock well. Have you adjusted the cams to make sure they are sliding in the right spot? Have you lock tighter though cam bolts to eliminate play?

@XploringOz

2 жыл бұрын

I'm glad to hear your product has worked out well. Interesting about the locks. It's not the actually turning of the lock mechanism that jams, its the key into the barrel and turning of the key. The turnlocks themselves work just fine and slide into place correctly.

Hi Nathan, shame that the installer rushed the job and you're stuck with this unpleasant sight on such a nice vehicle. Really like the rear mounted spare! Good choice.. cheers mate🤙

@XploringOz

2 жыл бұрын

Thanks mate, I'm disappointed too. Either way, I need to work with it now and I've got some good projects coming to work well with this product. The new rear wheel carrier is working very well! Got a few modifications to go along with this too! Cheers mate.

Great review - gees they look shocking

@XploringOz

2 жыл бұрын

Thanks mate, yes... unfortunately not the finish I was hoping for. However I now need to make the best of it. Cheers, Nathan.

Sorry to here the install wasn't up to scratch Nathan :( we have one on ours (was already fitted when we bought the car) and it has the same black vinyl strip on the rear door side also. Perhaps this is in the kit?? Keep up the good work :)

@XploringOz

2 жыл бұрын

Hey mate, yeah was very disappointing, but I need to make the best of it now. Perhaps it is in the kit, who knows, either way not my idea of a professional finish. How have you found your's has held up, still happy with it? Cheers mate. PS. enjoying the vid's you guys are putting out.

@DucruznOZ

2 жыл бұрын

@@XploringOz maybe it is part of the kit?? We love ours, especially as we have the big drawers in the back and the spare wheel carrier too.... easy access and my airline fitting comes out there for the compressor ;) cheers for the love, we are really loving the whole van life 👌👌 hope ur well :)

Hey Nath, sorry this turned out this way. I am struggling to find installers in my location that charge a reasonable price and can promise the fitting is good. I have been quoted $120-$149 an hour to fit bulbar and snorkels; with one company unable to give me a firm price. The industry needs a severe shake up, because charging $149 an hour is nowhere near what mechanics get! As we can see from your install, they are just butchers. Keep the vids coming mate, you are doing a brilliant job.

@XploringOz

2 жыл бұрын

Absolutely mate, I agree with you there! Its crazy to see what they charge for what is essentially quite basic work. Its hard to find good work these days, with new businesses popping up all the time... Thanks mate and I'm glad you are enjoying the channel.

Thanks for confirming that I shouldn’t get this.

I agreed with the company and agreed with them that they send it to me to the State of Kuwait so far I have not paid what is required of them. The question is whether the product has been developed to fit the Toyota Land Cruiser 200 or not.

@XploringOz

2 жыл бұрын

I believe they have some new designs in the making for the 200 series that may provide a more refined product that would fit the 200 series much better. Might be worth making contact with them again 👍

Sorry to see what they have done and that’s why I am very very very particular who touch’s my 200 and my loved 79 I would thrown the biggest tantrum and sat out the front of business warning others

@XploringOz

2 жыл бұрын

For sure, I'm also very particular about who works on my cruiser and my research pointed me in the direction of this company, however so wrong I was.... Either way, I need to work with what I have now. Cheers, Nathan.

You could Mount your fridge under window easy access for the cold ones

@dustyfarmer

2 жыл бұрын

A lot of fridges open end on on a slide.Don't worry, that EmuWing won't go unnoticed & will be used for first point of easy access by crims whenever the car is un-attended.

@XploringOz

2 жыл бұрын

There are many options and that is definitely one of them. Got a new project going into this area coming soon.

How do rate your kaymar wheel carrier? I don't want a complete rear bar/ wheel carrier & thst looks like a great option for the LC200

@XploringOz

2 ай бұрын

Mate, I love what I have. Never caused any dramas and I too, didn't want the full bar either. Very happy

Mate I couldn't look at that ever day .I would put original glass back in.

@XploringOz

2 жыл бұрын

I will be able to make it work in the long run and the functionality will make it worth it, but no going back now. It's a permanent modification.

Imagine putting a warming oven behind it, put a dominos logo on it and boom you have the dominos off road pizza delivery land cruiser xD

@XploringOz

2 жыл бұрын

Haha, good idea. Be the best delivery vehicle on the roads!

I must say that I love my Emuwings. Most of the really annoying points your rightly raise are a result of VERY poor installation. I’m an amateur and I feel I did a better job of the install than your professional (I have a multipart install video series on Jafffa Adventures if you are interested). I would definitely install them again if I had my time over, but not if it was a poor quality installation like you received. BTW, mine have been flogged for over a year now and no adjustments necessary, they just work....and yes I paid full retail just like you did. Keep up the good work mate😎👍

@maxgermasi3302

2 жыл бұрын

G'Day Terry Nice to see you around the Tube. You did perform a very good installation on your car but where can you find a business that can spend the same amount of time, care and attention to details like you did? Most "installers" believe that they win your business purely based on the price then they try to perform the job in the less amount of time possible in order to increase the deal profit. As a business owner I always find easier to justify an expensive good job rather than a cheap rubbish job but unfortunately the first impression is what's matter and consumers see the price before the job 🤷‍♂️. Cheers

@XploringOz

2 жыл бұрын

Hey Terry, I have watched your series and must say it was filmed and produced very well. I am definitely regretting not installing my own now, but either way I have to live with what I have. I'm glad to hear that your's are still going strong, this is somewhat encouraging. Cheers mate.

@JafffaAdventures

2 жыл бұрын

@@XploringOz All good mate. If it's one bit of advice I can give a young fella (relative to me) is to have a crack. You're a smart guy, you can figure it out and you certainly will be more attentive to detail than a hired gun. Go well Nathan!

@JafffaAdventures

2 жыл бұрын

@@maxgermasi3302 Thanks Max. I'm a small business owner as well and it you are not playing the quality game it's a race to the bottom and no one wins that race in the long term. Keep the shiny side up mate!

@XploringOz

2 жыл бұрын

@@JafffaAdventures Cheers mate! Hopefully the project I've built to go along with this product will make the modification worth it in the end.

Hi thanks for your detailed review. I was thinking of buying these for my 100 series. What do you think of the quality of the powder coating on the panel? I wouldnt want it comming off easily! Did you consider safety glass option?

@XploringOz

2 жыл бұрын

Thanks mate, I'm glad this honest review could help a few people. So far the powder coating has held up well. I have not noticed any flaking or peeling anywhere and it still looks good in that regards. I did consider the glass, however because I knew I wanted to build my custom compartment behind this unit, I didn't really want people seeing directly into it (even though I understand it's fairly tinted). Cheers, Nathan.

Farken Jesus. I’m an auto electrician in the Pilbara. I would hang my head in shame after being sacked fitting something poorly like that. I would be crying on the entire video if that was my Prado.

@XploringOz

2 жыл бұрын

Yeah mate, agree with you there! Not happy, but something I have to live with now...

Great review mate! I have had a pair of Emu Wings (auto glass) on the center windows of my Troopy for about 4 years now and although fitment was pretty good (did it myself), the seals and locks have been troublesome. I have also had all the powder coating peel off the pan head exterior bolts which is disappointing given the cost. I fully agree that, as a company, they probably need to make some updates to stay competitive in today's constantly expanding vehicle accessories market.

@XploringOz

2 жыл бұрын

Glad to hear your experience has been more positive. It sure can be disappointing when a product doesn't live up to its expectations when you spend so much money on it. No doubt another company will emerge with new products soon, I just hope that EmuWing are ready for this... Cheers, Nathan.

Great review. Wow they butchered the install.

@XploringOz

2 ай бұрын

For sure mate and I'm still living with it year on 🙄

great review ..I'm not sure why you don't name the installer particular if all factual.

@XploringOz

2 жыл бұрын

Thanks mate. There are a couple of reasons as to why I don't publicly name the business here. There needs to be robust factual tests based on fact that assigns the blame. Although personally I know this to be the case, I lack the official tests and immediate records to pass this blame onto the installer. The views expressed in this video are only my opinion on the product and installation. I hope this makes some sense to my reasoning. Cheers, Nathan.

@adamj1299

2 жыл бұрын

@@XploringOz .....i understand the need to not be perceived as liebelous on a public forum. It certainly sounds like there is a significant element of poor installation here which may unfairly prejudics an otherwise OK product. Best of luck .

In general it looks good on the car but the detail of the installation is a poor finish.

@XploringOz

2 жыл бұрын

For sure, I agree with you there. The functionality of this product is awesome though. The company just needs some finishing touches and some innovation to stay relevant.

although I like the concept the poor quality hinges and locking mechanism prevents me from purchasing this product. Would consider it if the manufacturer updated the hardware.

@XploringOz

2 жыл бұрын

For sure, there needs to be some improvement on this product to stay relevant and modern.

Sorry to see the result on the 200 Nate, but have to agree with the other 100 owners and say that a home install worked out well for me and that the functionality is totally worth it. The 'Wings' are a bit wider than on the 200 so the side access is really worth it, I spent the extra $ for the Toughened Glass wings, then got them tinted to match all the rest of the car, they look great, function to purpose and I wouldn't be without them. Most aftermarket vehicle modifications are a compromise and so long as you do your homework and look at the end results before you buy, you can usually live with that result. (Unless like in your case, the installer is totally dodgy) Still as always, you have given a detailed and objective review for the LC 200 owners, who are now aware of the downsides for their model of vehicle. Cheers

@XploringOz

2 жыл бұрын

For sure, I agree with you there mate. I also agree the 100 series users are definitely getting the most out of their systems with their much wider rear windows. I'm glad to hear that the install and functionality has worked out well for your vehicle. I was willing to put up with the compromise on the slightly inferior product quality, however the poor install was not something I was happy with nor expecting. Cheers mate.

That is terrible fitment mate, you are not being picky at all. Would be very annoying

@XploringOz

2 жыл бұрын

For sure, agree with you there. Frustrating, but something I have to live with now. Just have to make the best of the situation.

5:40 I'd be a bit upset just with the chopping and hacking of the trims. That's ugly as.

@XploringOz

2 жыл бұрын

Yep, not happy with that finish at all...

Hi Nathan the installation is terrible I would pissed off if this was done to my LC200 the installer would looking for a protollagist for the window removal. Loose hundreds of $$ off the value of the cruiser Ian

@XploringOz

2 жыл бұрын

Yes it is disappointing. I can only hope that my plans for the modifications to accompany this mod will make it worth it in the end... Cheers.

Watch Terry from Jafffa Adventures he did his own install worth a watch over 2 parts.

@XploringOz

2 жыл бұрын

For sure, he did a great job of installing his own, this is my biggest regret now.

Buy some graphite powder from Repco & squirt it in the locks...

@XploringOz

2 жыл бұрын

I'll give it a go. Anything would be better than it's current state. Cheers.

@pauladams4890

2 жыл бұрын

@@XploringOz graphite power is what should be done when your vehicle is serviced...it’ll free the lock mechanism right up...making the key slide in & out perfectly & make the mechanism work perfectly also.

Great review and what a disappointing install. This really needs a follow-up from the manufacturer.

@XploringOz

2 жыл бұрын

I agree. I'm glad to say that I have heard back from the manufacturer regarding this review, however in reality it's not going to change the quality of the install now...

If you haven't already seen this, can I refer everyone to jafffa adventures kzread.info/dash/bejne/dXiOtrqdeJjgm5s.html for a successful installation. There are two episodes.

@XploringOz

2 жыл бұрын

Yes, this is a great series and I'm now regretting now fitting these panels myself. Terry has done a great job on his Landcruiser with his install.

Damn..... that really ruined the car. Thanks for sharing I thought about getting one as I missed versatility having side access window from Ute canopy. But now looking at design flaws and overall quality i will give a miss.. i think i can replicate and maybe better quality witb price tag of $800. Its literally panel with hinge.. material cost would be less than $100. Thanks for sharing 👍

@XploringOz

2 жыл бұрын

For sure, there are a few things here that have put me off doing a modification like this again, I'm just glad I didn't do both sides. I hope that you might be able to build something better for your vehicle. Cheers, Nathan.

Good well presented video. Terrible installation & not a good looking product. Those hinges are massive. It looks like a trial product & 1st time trial installation. Not good.

@XploringOz

2 жыл бұрын

Thanks mate, hopefully this product can provide some information and considerations for others looking at a product like this.

Good views, and SHOCKING install.. you should name and shame so others don't use the same person. Definitely a poor product and I think it's ugly as hell. .

@XploringOz

2 жыл бұрын

Sure is a poor installation. There are a couple of reasons as to why I don't publicly name the business here. There needs to be robust factual tests based on fact that assigns the blame. Although personally I know this to be the case, I lack the official tests and immediate records to pass this blame onto the installer. The views expressed in this video are only my opinion on the product and installation. I hope this makes some sense to my reasoning. Cheers, Nathan.

The installation is pathetic that black contact strip is not from enuwing that is something the installer has put on probably to cover his bad install. I installed my own because every so called professional still had the sikaflex outside the frame. As for the locks mine still work fine after 4 years opened at least once a day every day and still no leaks.

@XploringOz

2 жыл бұрын

Awesome, I'm glad to hear that your's is still working as designed after a few years of use! At least that is something. Cheers.

Hows life under the Tyrants down under? Are you within your 5 km?

@dustyfarmer

2 жыл бұрын

F'n fantastic, He's in Western Australia, NO Covid & NO restrictions there other than keeping infected spreader bastards out of the state at the borders.

@XploringOz

2 жыл бұрын

We sure are lucky here in WA. Very few restrictions and lockouts for us.

Name and shame mate, that install is disgusting. I would be furious if that was my vehicle. The installer should not be allowed to touch another persons pride and joy.

@XploringOz

2 жыл бұрын

I hear the frustration and no one is more frustrated then I am, but I have to be careful when naming a business on an open platform. There are a couple of reasons as to why I don't publicly name the business here. There needs to be robust factual tests based on fact that assigns the blame. Although personally I know this to be the case, I lack the official tests and immediate records to pass this blame onto the installer. The views expressed in this video are only my opinion on the product and installation. I hope this makes some sense to my reasoning. Cheers, Nathan.

So overpriced! I just made my own and it works great.

@XploringOz

2 жыл бұрын

Yeah, it's pricey but for those who either can't or don't have the tools/experience to build their own, it's one of the only options available.

Have a look at this KZread video for another perspective. There are 3 parts to this installation. I recommend watching all 3: kzread.info/dash/bejne/dXiOtrqdeJjgm5s.html

Wow for the price the qulity is rubbish. They are blood kitchen cabinet hingers. Be out of date tech on a 70 series Landcruiser lol

@XploringOz

2 жыл бұрын

I agree with you there, outdated technology and products on a modern and expensive vehicle. This company needs to innovate.

FAAAARK, that is the worst "professional" work I have seen.

@XploringOz

2 жыл бұрын

I can agree with you there!

I have to say mate. I would be so pissed off with that finish. The value and resale of that car has just dropped massively.

@XploringOz

2 жыл бұрын

For sure, it is disappointing. The only positive is I won't be selling this vehicle... Cheers.

Grow some ⚽️⚽️ and name and shame, else other will suffer the same dodgy work from this guy. He will now say yea yea I've done a few of these now and BAM! Another unhappy customer. Poor form pal.

@XploringOz

2 жыл бұрын

There are a couple of reasons as to why I don't publicly name the business here. There needs to be robust factual tests based on fact that assigns the blame. Although personally I know this to be the case, I lack the official tests and immediate records to pass this blame onto the installer. The views expressed in this video are only my opinion on the product and installation.

@jasper287

2 жыл бұрын

@@XploringOz dont hide behind all your excuses. This installer will now tell the next unsuspecting custom oh yes ive installed one or many of those gull wing doors, your car is safe in my hands.

Sorry. Looks poorly engineered and designed. Hinges look like something out of a kitchen. Doesn't seem to match the rest of toyota design quality of youre Great sahara. Just get a twin cab ute with a canopy.

@XploringOz

2 жыл бұрын

Sure is a disappointing install and product, however it's there now and I have to make the best of it. Ute's have their pro's, however I'm a wagon fan both for storage and wheelbase. Cheers, Nathan.