Great work. I just build a small (1000 Teu) Containerfeeder in 1:100. I also started with styrofoam. But after getting the shape I put glasfiber on it. So I got i nice hull. Then I made some frames and glued it on the inside of the hull. But I really like your way. Now I know how to get a wooden hull from scratch. That’s great

She's beautiful , good shape , super neat detail and painting .Best wishes from Wales .😍😍

Wow, thats a hyper detailed model she's beautiful.

thats amazing,lights are wonderfull

absolutely amazing i work on the container terminal at immingham docks would look amazing under some container gantry cranes the real things are an amazing pieces of engineering and flood lit are strangely magical well done ron

A very inspiring job! Well done

@01homeghost

7 жыл бұрын

Thank you for your kind words.

I watch the video and still don't get it - incredible job! A masterpiece!

Nice work !

Absolutely stunning.

@01homeghost

10 жыл бұрын

Thank you

I am speechless, amazing work dear sir!

@01homeghost

10 жыл бұрын

Thank you for your kind words.

Het is een mooi schip geworden Ron. Op naar je volgende project :-)

Ron het is een prachtig eindresultaat geworden en wens je alvast veel succes met het volgende project!!

Thank you John for your nice words.

Outstanding and a masterpiece! I do good work on my models, but do not have the patience or space for that kind of project... living in Florida, with no basements or work areas, really hurts! Nice job!!!!!

@01homeghost

8 жыл бұрын

+chei1243 Thank you for your nice words. Perhaps if you will look in my site there are more projects from me. www.homeghost.nl

I am very impressed with Emma Maersk, beautifully constructed and finished.I am inspired to build the same ship using your foam techniques. Can you help me located line drawings for plan view, elevation view and body view.

Very impressive, I'm seriously considering building a full remote control Emma Maersk at 1/96 scale!

@01homeghost

10 жыл бұрын

That will be a very BIG Emma :). Thanks for your words.

Geweldig Ron, Mijn complimenten. Met bewondering je project gevolgd en zal er nog wel eens op terug vallen om wat van je ideeën te lenen. Ik zal zeer zeker je volgend project ook volgen Groeten Frits

Dank je wel Henkey. Ik ga in ieder geval daarvoor mijn best doen.

Thank you for your comments. I think that the fiberglass will destroy the foam. You can try to test it first with fiberglass. Mounting kit is the best glue for foam. Other glue can also destroy the foam. That`s why i did use mounting kit and balsa wood for the hull covering.

Thats amazing

You r so talent

I have still another project ready for some time now but I have these days not enough time to make the video ready of it. It is the third build from me of the VII C sub from the German navy in WWII. I hope to make this in the near future.

@ambreouellette5085

7 жыл бұрын

Ron Campagne

Mr champagne. Your truly a gifted craftsman. I enjoyed watching your build how long was the whole process start to finish?

Dank je wel Marc. Ik ga mijn best doen met het nieuwe project.

Dank je wel Frits voor het compliment.

thank you

Dank je wel Flip 19501. Ik ga mijn best doen om ook het volgend project goed te gaan vervolgen.

Dank je wel Johan voor het compliment. Ik neem inderdaad even een rust periode om dan weer vol met het nieuwe project te gaan starten. De voorbereidingen ervoor zijn al gedaan (research).

nice build sir..what kind of putty did you use..its look fine..is it cars putty

You do very good work sir. My main problem is in obtaining the proper shape of the hull, I like your technique and may adapt it for my own use. I primarily build warships and would like to build a scratch model of my first ship, a Spruance class destroyer for radio control. Thank you for the inspiration.

@01homeghost

7 жыл бұрын

Thats nice to read. Thank you for your nice words.

Thats an awesome model, needs the lashing bars on the boxes and a ton of grease to really bring it to life

@01homeghost

7 жыл бұрын

Yeah....thank you.

Mijn dank Loek voor het compliment.

Браво , мастер!!!

@01homeghost

8 жыл бұрын

Densais I am sorry but i can`t read your message. But anyway thanks for the respons.

@Densais

8 жыл бұрын

Ron Campagne Unfortunately I do not speak in English. I admire your work.

@01homeghost

8 жыл бұрын

+Densais Thank you. If you want you can visit my website to see other new projects. www.homeghost.nl

@Densais

8 жыл бұрын

+Ron Campagne Thank you. Watch. Twenty-three years, the model is not designed. Look. I study. I learn from the experience. Prvet from the city Kronstadt!

incredible build

@01homeghost

7 жыл бұрын

Thanks for your nice words!.

@01homeghost

7 жыл бұрын

Thank you

VERY GOOD

A lovely model. Have you considered carving a solid hull from lime / basswood? I am working on an early 1:200 Cunard liner at the moment and basswood carves very easily and is not an expensive wood.

@01homeghost

7 жыл бұрын

No I don`t think that I going to do that, but thanks for your suggestion :)

Very inspiring, I will make an attempt at model ship building

@01homeghost

6 жыл бұрын

Thank you. That`s the spirit. Build your very own model from scratch..

@pei8988

6 жыл бұрын

Just one more question sir, how do u get those ship plans from? Right now i am doing research on building my first battleship, i wonder if u find it on a website or just use mark one eyeball on some actual photo to make it out???

@ridge2244

6 жыл бұрын

Hello, You can probably get photos of the ship are interested in building. You can the specs on the internet. Then you can decide the scale you wish to build. Hope this helps.

Show! Tô começando a fazer alguns, muito bom!

Man, I wish I could do that. What kind of putty was that?

Hello good morning, could you please tell me where to find the ship construction plans. Thank you

Donde puedo comprar uno de esos o como lo puedo hacer?

gostaria de saber as dimensões desta embarcação ? È escala HO ?

Espectacular muy bueno 🚣👍

@01homeghost

6 жыл бұрын

Thank you for your nice words.

@01homeghost

6 жыл бұрын

Thank you.

i cant even begin to imagine the cost of this thing

Really nice work. I live three kilometers from Odense Steel Shipyard where they built the great Maersk ships. Know many who have worked shipyard and build the large container ships. My neighbor was employed there for more than 25 years and has helped to build many container ships in the yard closed. Can I ask you for the music (guitar) as a player who is it? - Thanks :-)

@01homeghost

7 жыл бұрын

Nice to live there so close. There you can take a lot of picktures!.

@patriot-wf1er

6 жыл бұрын

Morten Work the music is Jan hammer. it's called sonnys song from the Miami vice sound track in the 80s

Bertstien ik ga zeker mijn best doen om over enige tijd het nieuwe project ook zo goed als mogelijk te gaan bouwen. Bedankt voor jouw compliment.

Is that copyrights for using the logo

i will subscribe and lke this very cool am speachles

Great work!. The container colors need to be randomized. Other than that, world class my friend.

nice

👏🏻👏🏻

Classe.

@01homeghost

10 жыл бұрын

Thank you.

How hard would that be to build a ship like that in HO scale?

@seorwulf1049

5 жыл бұрын

Would be a similar process I guess but it would be over 5 meters long!!

yeahh you got it your a nice jobe

@01homeghost

8 жыл бұрын

+Devert Pillazo Thank you. Maybe you will find my other projects also nice to see. www.homeghost.nl

@devertpillazo469

8 жыл бұрын

Nice bro how can you do that.your mind is like a enginer mind

@01homeghost

8 жыл бұрын

+Devert Pillazo I don`t now but I search for a nice project and then I do a lot of research to find lots of picktures and then i draw the new project and start to build it.

for the real bro ema mearsk have.deleverd in the philipines yet

@01homeghost

8 жыл бұрын

+Devert Pillazo Yes she is a lady that travels almost all over the globe.

have you stil the plains to it

@01homeghost

7 жыл бұрын

Yes but the most of the drawings are copyright protected from MAERSK.

the length will be 150.4cm, instead of 1504cm. am i right?

@01homeghost

9 жыл бұрын

:) Yes....

I want a job doing that!

@01homeghost

8 жыл бұрын

+Mac McDougal Yeah that will be nice. But for my it`s a hobby. Thanks for the respons.

Damn Good!! (Y) I Salut You!

@01homeghost

10 жыл бұрын

Thank you

Wow pretty good

@01homeghost

9 жыл бұрын

Naveen Dinakaran

@01homeghost

9 жыл бұрын

Ron Campagne Thank you.

Is it radio control

@01homeghost

9 жыл бұрын

I am sorry for this late respons but I am very busy with some new projects. The Emma is not radio controlled. Thanxs for the respons.

Why are none of your videos showing any of your models on water? Are they just for display purposes?

@01homeghost

7 жыл бұрын

Yes they are only for display purpose.

👍🏻niesh

You need a bigger house. ;)

I did not want to rate this build because I was not sure if what I was seeing was a full scratch build as described or a mostly scratch build, since you did not show the making of the tower, the fore or aft decks. These look like details provided from a kit. And if they too are scratch-built, then why didn't you show us how you went about making them? You achieved a very nice result, but you left out a lot. A lot a lot.

U

thank you