Check out some more Cricut Embossing tutorials here: kzread.info/head/PLkpaKJi6XJQKxyGZ31ojyNI1HDEwtDhx6&si=tU1KPBgmXLzV-gKr

I really appreciate how simple your tutorials are. Plus the fact that you hop right in and don't give us 25 minutes of filler. Great video!

@KellyRossouw

Жыл бұрын

I appreciate that!

@KdogBites

8 ай бұрын

Same for me!@@KellyRossouw

@relicbane

2 ай бұрын

@@KellyRossouwyou need to publish a tutorial for how we can give you more than 1 like per video. Brilliant stuff. Thank you!

This by far is the best tutorial on embossing and debossing I have seen! Easy to understand. Very step by step. I have definitely subscribed to this channel!

@KellyRossouw

Жыл бұрын

Thank you so much 🥰 very much appreciated!

Wow! That's a fantastic result. Thank you so much. I have a project that I've had in mind for a couple of years and this is just what I needed to know.

@KellyRossouw

Жыл бұрын

Glad it was helpful! Good luck!!

You're amazing! I've watched a lot of videos on this. I've also read up on it many times. I could never figure it out! But you have explained it and shown it beautifully! Thank you so much!

@KellyRossouw

Жыл бұрын

Ah thank you so much! So glad it helped

thank for such a comprehensive and clear tutorial on deboss and emboss! appreciate you sharing your testing results.

@KellyRossouw

Жыл бұрын

You are so welcome!

This is the exact video I’ve been looking for, thank you!!

@KellyRossouw

Жыл бұрын

You are so welcome!

I am waiting for my Cricut Maker 3 to arrive & want to learn from you. I am so happy I found your tutorials..

@KellyRossouw

Жыл бұрын

How exciting!!! Thanks

Thank you for this amazing tutorial! 🎉 bought my maker today & deboss/embossing is the first thing I want to tackle! 😍

@KellyRossouw

Жыл бұрын

You are so welcome! Good luck!

I'm a new cricut owner and I love your videos!!

@KellyRossouw

2 жыл бұрын

Thank you so much, and welcome!

I'm doing a happy dance. First time using the Deboss tool and it worked amazingly! Thankyou :)

@KellyRossouw

Жыл бұрын

heck yes! You did all the hard work - well done!

Kelly, Your tutorial is really great. Enjoy learning from you.

@KellyRossouw

Жыл бұрын

Thanks so much!

Love this information. I have been wanting to find a way to emboss with the Cricut & you have taught me the way. Thank You!

@KellyRossouw

6 ай бұрын

You are so welcome!

First time watching one of your videos - it won't be be the last. You make it so simple and direct. I hate watching long videos that just use fillers. Thank you.

@KellyRossouw

8 ай бұрын

You are so so welcome! Welcome to the channel 💚💚 And thank you so much!

Thanks for this. Just got my machine today and tested this method. Came out great!

@KellyRossouw

2 жыл бұрын

oh fantastic!! Well done 😍

Ohhh so glad I found this video of yours! I've been wanting an embossing machine but don't need the die bits as have a Cricut Maker. I have used the deboss tool a bit but using it to EMBOSS like you show, looks fabulous. Just have to test it... back soon!! SUCCESS!!! I used MAKE A WISH and it turned out great. thank you!

@KellyRossouw

2 жыл бұрын

oh that's amazing! I'm so glad you had success! Well done!! 😍

Your video was amazing. I watched an “embossing” video when I first got my Maker and it seriously scared me off (for two years!). Watching your video has given me the confidence I needed to try embossing again. I’m now a subscriber!

@KellyRossouw

Жыл бұрын

Awww thank you so much Nancee! Really appreciate it 🙏 good luck!

Thank you for this video. I have had my cricut for over 3 years and never tried embossing/debossing. You explained this so clearly and easy to understand. Thank you. I finally did my 1st embossing because you gave me confidence to do it.

@KellyRossouw

10 ай бұрын

Glad it was helpful! Well done on your project 🤩

You explain things so clearly! Thank you. 😊

@KellyRossouw

7 ай бұрын

You're so welcome!

Thank you thank you. I did it. I've been debating on buying an embossing machine. You have saved me some money,

@KellyRossouw

Жыл бұрын

Glad I could help!

I appreciate your videos. I always learn so much from you! Have a happy day!!!

@KellyRossouw

Жыл бұрын

Thank you! You too!

This video was great. I really enjoyed watching a crafty showing her Black belt 🥋 . you earned my subscription

@KellyRossouw

3 ай бұрын

aww thank you so much!

That was the best video I have seen! Thanks so much for sharing!!

@KellyRossouw

2 жыл бұрын

Aw thank you so much Cori!! You are so kind

Love this video! I just purchased my second Cricut machine a Maker 3 because I wanted to do embossing, You made this SO easy to understand ! Thanks so much !

@KellyRossouw

2 ай бұрын

You are so welcome! Hope your projects come out super super well!!

Thanks for this. Brilliant. I've used foam sheet backer to get deeper deboss but I like the emboss much better

@KellyRossouw

6 ай бұрын

Glad it was helpful!

Great video explaining in detail debossing and embossing. Thanks!

@KellyRossouw

10 ай бұрын

You're very welcome!

Thank you so much for your tutorial! The result looks awesome!! 😮❤

@KellyRossouw

7 ай бұрын

You are so welcome!

GREAT video, exactly what I was looking for. Thank you very much

@KellyRossouw

Жыл бұрын

Ah awesome! Happy to help 😊

Wow I had no idea cricut could do this! Thank you for sharing!!

@KellyRossouw

2 жыл бұрын

Happy to help!

Oh my god thank you for explaining❤️. I’m going to do wedding invitation card so this really help. I’m going to buy the embossing tip asap🤙

@KellyRossouw

2 жыл бұрын

yaaaay! Thats the perfect excuse to use the debossing tip! Wish I had a Cricut when I got married hehe

So excited to learn this technique. I am going to use it on my daughter's wedding invitations? Amazing tutorial! Thank you.

@KellyRossouw

2 ай бұрын

Wonderful! That is such a perfect application of this technique! Hope you have an absolute blast x

You're a genius!! loved this!

@KellyRossouw

19 күн бұрын

Thank you so much! 🥰

Watched this last night and was hooked I had to try it. Went to a Cricut social day today and did this technique. Unfortunately my 165gsm was not good quality and it ended up with holes. I then used my American Crafts cardstock. This worked OK but as you said the thicker the cardstock the less sharp, so I debossed it a second time and was thrilled with the result. Thank you so much.

@KellyRossouw

8 сағат бұрын

oh thats so exciting! Glad you came right, well done!!

Thank you I just received my embossing tool for my cricut maker3 and sat and watch your video and did my first embossing, its not perfect but i will try and improve on my first attempt :)

@KellyRossouw

6 ай бұрын

Wonderful! Thats all we should ever do! Keep trying and improving! Well done!

THANK YOU!Best tutorial on here.

@KellyRossouw

2 жыл бұрын

Aw Thank you so much! So glad it helped 💙

You just gave me great ideas with this video, so thank you 😁

@KellyRossouw

2 жыл бұрын

I'm so glad!

Curious Metallics is the name of a line of paper and cardstock made by Arjowiggins!

@KellyRossouw

2 жыл бұрын

Thanks for sharing! Would love to know how they got the name 😂

Awesome! Super informative. Thank you

@KellyRossouw

2 жыл бұрын

Glad it was helpful!

wonderful explanation and tutorial- thanks so much!!

@KellyRossouw

4 ай бұрын

Glad it was helpful! Thank you 💚

Love it! Thanks for such a wonderful video!

@KellyRossouw

3 ай бұрын

Glad you enjoyed it!

Thank you so much for this tutorial was very helpful!!! Liz ☺

@KellyRossouw

7 ай бұрын

You are so welcome!

Thank you so much for your beautiful information, I love your video.

@KellyRossouw

Жыл бұрын

You are so welcome! It is the Cricut Maker 3 :)

Wauw thank you so much I missed the embossing of my silhouette machine but this solution is great.

@KellyRossouw

2 жыл бұрын

You are so welcome! I missed it too :( glad that I can do it on my Cricut though 🤭

Amazing tutorial. Thank you!

@KellyRossouw

2 ай бұрын

You're very welcome! Hope your project is a super success!

Had to watch this again . I got aa cricit Maker coming to me on the 9th August . I got it new from ebau UK it is Champagne color . I am really excited. Happy Clacking xxxxxx

@KellyRossouw

10 ай бұрын

ooooh that is very exciting!! Have so much fun!!

@bethmegansmith4642

10 ай бұрын

🥰@@KellyRossouw

thank you for your easy to follow, great video!

@KellyRossouw

4 ай бұрын

You are so welcome!

Thank you for this tutorial! just brought the embossing tool a week ago, was looking to fine a tutorial con embossing came a cross your channel glad I did! Thank you for sharing! Just Subscribed to your channel...

@KellyRossouw

Жыл бұрын

You are so welcome! thank you for the support!

@elizabethvallely4044

Жыл бұрын

@@KellyRossouw You're very welcome!❤

Stunning! Have to try this, but think I need to watch the tutorial a few times again...🙈

@KellyRossouw

2 жыл бұрын

You are most welcome! Yesss! Thats exactly what I do too 😁

Awesome thx Kelly, great tip

@KellyRossouw

2 жыл бұрын

You're so welcome! 💙

What a brilliant tip on embossing and debossing! Thank you so much for sharing! I tried the deboss tool for the first time yesterday and was frustrated with results. Your tutorial makes so much sense and I am looking forward to watching more of your videos.

@KellyRossouw

7 ай бұрын

Glad it was helpful! Thanks so much as well! Very much appreciated 💚

Such useful info. Thank you.

@KellyRossouw

Жыл бұрын

You are so welcome!

Great information! Thank you!

@KellyRossouw

Жыл бұрын

You are so welcome!

That looks great thanks for the tip! :)

@KellyRossouw

Жыл бұрын

You are most welcome!

Thanks for share, I love the proyect ❤😊

@KellyRossouw

7 ай бұрын

You are so welcome!

Such a great video!!!

@KellyRossouw

Жыл бұрын

Thank you!!

This is fantastic!! Thank you :)

@KellyRossouw

Жыл бұрын

You're so welcome!

_Thank you_ , for sharing been thinking about the , the new *_Cricut_* auto press as well as the hat press , *_Awesome_* video Continue to be Great and" Break the sky with your *_Creativity!_* 💯🗣🔥

@KellyRossouw

2 жыл бұрын

You are so welcome! I cannot wait until they are available in my country - I will definitely do videos on them for sure! 😍

Thank you Mega Cleaver 🤗

@KellyRossouw

2 жыл бұрын

haha thanks so much

Omg!!! So amazing!!!

@KellyRossouw

2 жыл бұрын

hehe thank youuu :D I love it 😍

I’m from South Africa Cape Town, love from Canada Ontario ❤

@KellyRossouw

8 ай бұрын

oooh awesome!! Hi! 😍

Thank you great video on this.

@KellyRossouw

2 жыл бұрын

Glad it was helpful!

Gorgeous 😍

@KellyRossouw

Жыл бұрын

Thank you! 😊

I’m going to try this! I’ve had the debossing tool for a while and have been afraid to try it!

@KellyRossouw

Жыл бұрын

Ohh please do! Its so much fun :)

Wonderful! Thank you.

@KellyRossouw

Жыл бұрын

You are so welcome!

Brilliant!!!

@KellyRossouw

Жыл бұрын

Thank you so much!

Thank you for this tutorial. It is super helpful. I was wondering if you knew how to add color to the embossing. So for example, if I just wanted to add color to the raised text vs. leaving it the same color as the paper

@KellyRossouw

8 ай бұрын

You can cut another layer as the stencil and lie it on top perhaps? Its not often something I do

Great ideas!

@KellyRossouw

2 жыл бұрын

Glad you think so!

great video, thx

@KellyRossouw

Жыл бұрын

Glad you liked it!

That's COOL!

@bikrgran

7 ай бұрын

Just to clarify, in my mind, you are using the cut design to give the debossing tool a "ledge" to make the card more pronounced? Does that make any sense? 😆

@KellyRossouw

7 ай бұрын

Thanks so much! Yes that is exactly what I do! And because I use a thicker harder board as the stencil for the ledge - the result is THAT much better!

@bikrgran

7 ай бұрын

@@KellyRossouw awesome! Thanks!

Thanks, I was wondering how to do this. I've tried and failed and almost gave up. I just subscribed!

@KellyRossouw

2 жыл бұрын

Thanks for the sub! 😍

Wowww muchas gracias!!! 😍

@KellyRossouw

9 ай бұрын

Eres muy bienvenida!

I've been wondering if you needed templates for embossing/where to find them so your video answered that question for me thankyou.

@KellyRossouw

Жыл бұрын

Glad I could help!

fabulous video and tutorial! to answer your question Curious Paper Metallics is a paper company and the "metal" is the finish of the paper that looks metallic but doesn't have actual metal in it. I love this paper line. beautiful stuff!

@KellyRossouw

Жыл бұрын

Thank you so much! And thanks for sharing 💙

@kathiespecht4359

Жыл бұрын

@@KellyRossouw Do you know what weight of the curious paper metallics you used. I've found it in many different weights. Thanks. Enjoyed your video.

Great video! How about making a stencil out of kraftboard that is mirrored? So doing it all from the back side, if you understand what I mean? Or is it even possible to do it in the Cricut software? (The 2 step, with just step 2 as you already have the stencil after the first time). Love your style by the way! This channel will definetly gain popularity soon!

@KellyRossouw

2 жыл бұрын

Thank you so much

Thanks so much for this! I subscribed to your channel and look forward to learning a lot from you. Do you happen to have a cheat sheet for this tutorial? Thanks!

@KellyRossouw

Жыл бұрын

Welcome! I dont have a cheat sheet unfortunately :(

Thank you! It’s a bit intimidating but I suspect it’s due to my still somewhat limited experience with my Cricut.

@KellyRossouw

Жыл бұрын

You are so welcome! Im sure you will be a bit more comfortable with it soon :) Give it time and practise!

hi! it looks so good! I was just wondering if you have a video with embossing something a image pattern into something? I am having trouble translating embossing the writing into embossing a pattern of images

@KellyRossouw

Жыл бұрын

It is something I am working on, so hopefully will be able to do a video on it soon!

i was wondering if this would be possible on leather? Maybe a thin one?

Wonderful video--thanks for sharing. I am just a bit confused. Do I set the off-set when cutting or just when I start to emboss/deboss?

@KellyRossouw

5 ай бұрын

You offset the emboss layer!

Thank you so much for making this video. I have tried to do the embossing as per your instructions on two occasions. The first time I cut medium cardstock on the mat and used medium cardstock for the embossing. The second time I cut poster board on the mat and used medium cardstock for the embossing. On both attempts, there were two small tears from the embossing tip on the embossed paper. Do you have any idea what I did wrong? Thankyou for all your helpful information.

@KellyRossouw

2 жыл бұрын

You are so welcome!

@cindysouthall1722

2 жыл бұрын

@@KellyRossouw Thanks for your reply. You were right. I changed the settings to less pressure and that fixed the problem. It turned out beautifully.

Thank you for your video. I am fairly new to cricut but have learned a lot in the last few weeks and have been able to cut out some very detailed cards and successfully scored fold lines. I will have text on the cards and would like to deboss it. When I tried this for some reason the debosser tool is only debossing the outline of my text. I'm not sure what I'm doing wrong. Perhaps you can help? Also using your offset method to deboss how do you make sure the second piece of paper adheres to the first? Thank you.

@KellyRossouw

9 күн бұрын

You are most welcome! The tool is intended to only do the outline, which is why we use the stencil to deboss out the entire section! :) The paper doesnt adhere to the "stencil", it removes from the mat leaving the negative behind :)

Thank you so much for this. ☺️ Do you think there would be any way to use this to emboss leather?

@KellyRossouw

3 ай бұрын

Most people engrave the leather instead of embossing it. I dont think the embossing tool would leave enough of an impression - depending on the leather of course!

Thank you for your wonderful tutorials! I wanted to ask your opinion…do you think it’s possible to emboss/deboss on parchment paper? So far, my attempts have been unsuccessful.

@KellyRossouw

Жыл бұрын

You are so welcome! I havent tried, but perhaps because it is a paper with thicker fibers you might need a different approach. Are you using kraft board as a stencil?

Hi, I’m new to Cricut and loved your video. Is that the Cricut Kraft board you used? And will the fine point blade that came with the maker3 cut it or do I need to buy another blade? Thank you!

@KellyRossouw

Жыл бұрын

Welcome to the family! Yes, the board underneath is the Cricut Kraft board - fine point cuts it perfectly, no need for another blade! :)

Have you ever done this method on cork fabric? If so, I would like to watch!

@KellyRossouw

7 ай бұрын

I havent unfortunately :(

Your hair is amazing

@KellyRossouw

Жыл бұрын

Thank you so much! :)

Fabulous. Thank you

@KellyRossouw

2 жыл бұрын

You are so welcome!

Great Video! Is this how the Cricut maker 3 would also use the deboss tool?

@KellyRossouw

Жыл бұрын

Thank you! Yes, exactly the same 😊

I've had that tool for quite awhile I forgot about it. Glad I caught your video. Will have to try this. Once done with the design fo you save it? I'd put transfer tape or maybe press and seal be better? on it and save it to reuse, can you do that? Thanks for sharing. Saved this too,to rewatch,and subscribed. :)

@KellyRossouw

Жыл бұрын

Im sure you can save it, lining it up again will be a bit tricky, but totally doable!

@lauramartin7300

Жыл бұрын

@@KellyRossouw thank you

Thank you for the tutorial! Do you know if there is any way I can deboss and print ink on the same areas? I'm completely knew to the Cricut and trying to print my poetry on cardstock!

@KellyRossouw

Жыл бұрын

Hi Shannon! This would be quite an advanced process and lining this up could be quite challenging. Its not something I have ever tried, but I do believe it is possible to do. Ill take a look into it and see if I can make a video about it at some point in the future :)

Kelly, can the emboss/deboss feature be used on metal round blanks? Like a pendant?

@KellyRossouw

3 ай бұрын

A very VERY soft pliable metal yes, but not hard metals, You can only engrave those.

I love your videos but I’m having trouble putting the emboss method into practice. When I use the offset as you instructed it creates a “bubble” kind of image around the original which doesn’t look at all like yours. Any suggestions? I just got a maker after using an explore air 2 specifically for the emboss capability .

@KellyRossouw

7 күн бұрын

You need to adjust the width of the offset when using this method. In this video at 2:26 you can see where I adjust the offset distance :)

I just tried it for the first time and yay! I had a few mistakes but I am ready to try again. I do have a question though. I only have medium weight cardstock currently and I am using it for the embossing. What were you using for the actual cut part and what were you using for the embossing part? What weight of paper do you recommend for each? Like at least a certain weight for each? Thanks so much for the really easy tutorial!

@KellyRossouw

5 ай бұрын

I use 300 gsm Kraft board for the stencil, and I emboss on the 216gsm medium cardstock, or lower

@crazymered1

5 ай бұрын

Thank you so much! I really appreciate. 😊. Excited to make a card for a wedding using this method ❤

Thank you for this video. Will this method work on faux leather?

@KellyRossouw

2 жыл бұрын

I havent tried yet :)

I haven't worked out how you use my embossing tool yet... I set my designs to deboss but no result is produced on the paper. I will watch your film again to make sure I'm doing it right. ...But you'd be interested to note that I've worked out lots of ways to make embossing folders myself - I've also uploaded the designs to DesignSpace that you can make in any plastic or vinyl which consists of two or more layers which allows you to peel one of the layers off after cutting. I love using Floor Lino the best and I'm getting great embossings with it on thick cardboard and one of my embossing devices or printing presses. Thanks for this film. I really want to work out how to use the embossing tool but on my third try I'm still got getting a result in cardstock!

@KellyRossouw

9 ай бұрын

Good luck! Yes, I use this technique myself, and actually recently released a video on it - kzread.info/dash/bejne/qYuM17eqmc21l7g.html

Very nice video tutorial, but will to watch the video a couple of times Because I don’t quite get it yet. 😊

@KellyRossouw

5 ай бұрын

Glad it was helpful!

I really didn't understand how to do either of these techniques, but now I understand. It seems a bit fiddly, but so worth it. Just a question, do you move down and to the left for both the embossing and debossing? Thanks for sharing.

@KellyRossouw

7 ай бұрын

You are so welcome! As long as you attach both the cut and deboss layer to an 11.5" square, you wont need to move the design. I cover it differently in this video: kzread.info/dash/bejne/oW1qxqmTdJSfdps.html

@JanisGodwinSpear

7 ай бұрын

Thank you - I will check it out ❤

Smart

@KellyRossouw

Жыл бұрын

Thank you!

Hey love the video thanks! Just wondering, do you have to use the Cricut templates to emboss and deboss, can you create your own? Deciding whether or not I should buy a cricut !

@KellyRossouw

28 күн бұрын

You can use absolutely any design you want, just follow my method outlined in this video and you cant go wrong! You can upload your own designs, write using your own fonts, whatever your heart desires!!

@nicoleshine

28 күн бұрын

Thanks for your fast reply! I'm going to get one. I make wedding invitations, can you recommend any specific cricut? Is there any that does all functions?

@KellyRossouw

27 күн бұрын

If you can get the Maker - absolutely go for that one. But if you want to be able to cut larger than 24" the Maker 3 is your better option, but most choose the Maker over the Maker 3!

@nicoleshine

27 күн бұрын

Thank you !

This is great! How do you duplicate? I see you dragging the deboss pic away from the original. Mine just changes to deboss... Did you just upload the same pic twice? Thanks!

@KellyRossouw

2 жыл бұрын

Thank you! I do it in the tutorial - I create an offset :)