Elvis Creates A BRAND NEW Bumper For The Classic Mitsubishi Shogun 4x4! | Wheeler Dealers
Автокөліктер мен көлік құралдары
Subscribe to Wheeler Dealers TV: bit.ly/3IWnYJG
Mike and Elvis have a crazy idea - why not bring the classic Mitsubishi Shogun 4x4 off-roading since that's what it was originally designed to do anyway! Even if it means having to make a brand-new bumper and restore the car to the finest condition...
🇬🇧 Catch full episodes of Wheeler Dealers on discovery+: bit.ly/3L6XS4p
From Season 17 Episode 19
Пікірлер: 72
Subscribe to Wheeler Dealers TV: bit.ly/3IWnYJG
Perfect fabricated drafted bumper design,,,, lovely
Nice Job. All we the owners who fit 32/10/15 or more, had to do the same. In my particular case, I used two extra lift kit nylon suports on top of the frame, so (in case I change to smaller tires again to avoid mud terrains destruction on the asphalt) I can adjust the bumper position correctly. Now I’m on 33/12.5/15 and it looks and performs really well on and also off road. ARB lockers, performance clutch, shorter ring and pinion set, etc… A beast. It’s not a rock crawler, but I call it the “Black Widow” cos it’s black and it crawls so well. Now I’m planing to cut some sheet metal and ad a diff drop, but I can’t find gear and pinion set even shorter for bigger wheels. Who knows… perhaps i’m lucky 😅
Great job that looks so good! 🎉❤
One of, if not the most capable off roader. The super select system they introduced with the 2nd gen is amazing. Surely miss my old 2nd gen, but love my 3rd gen just as much ❤
Great upgrade. It's a shame they stopped producing this marvelous vehicle. Few come close.
@user-ui4rk5lu9v
Жыл бұрын
Where I'm from we have a saying :"If it's not leaking oil then it's not a Mitsubishi".
@SandunLabs
11 ай бұрын
@@user-ui4rk5lu9vLol, where are you from ?. Parking lot 😅?
@user-ui4rk5lu9v
11 ай бұрын
@@SandunLabs I come from a place that's thousand times better than your mother's womb...
@aaryeshg.6526
16 күн бұрын
@SandunLabs I've seen high mileage and abused ones leak oil but they still keep going.
How do you access the winch to service/repair/replace it. Nice rig. Cheers 🇨🇦
awesome mitsubishi
Nice bumper. I just start fixing my 1990 Pajero 😉
6:00 The slot for the winch line moved down. Was top, now bottom.
@kencarse3677
Жыл бұрын
Yeah I thought also looked to narrow then you see the final shot. O well all part of fabricating. Wonder if they flipped or just cut a new slot?
@toddhansson1613
Жыл бұрын
It may have had to do with the number plate location ?
@philleeson7835
Жыл бұрын
@@toddhansson1613 I doubt it.more like a F@#k up.
I service a couple of these for a local farmer. They seem to be some sort of Ralliart special edition. Tons of gauges, adjustable Bilstein suspension, leather seats, Nardi steering wheel. One has rather nice 3 piece factory wheels too. But being farmers literally everything is destroyed or badly damaged. Awful shame
Espectacular I hace one second generations impecabel
5:28 That new front bumper does not connect at all to the silver-gray wheel arch extensions (don't know what those silver-gray things on the wheel arches are called).
@KevinJones-bt7ib
Жыл бұрын
The arches didn't look right with that bumper, maybe if they were sprayed black it could of looked better, or even wrapping them with a carbon fibre look might of looked good
@turquoisecat761
Жыл бұрын
@@KevinJones-bt7ib could "have"
Was wonder what year this shogun is in this video if anyone can help
I think the shape of the bumper looks fantastic. My only gripe is the slight over hang of the number plate. It would bug me. Aluminium would have been a lighter and better choice for longevity. IMO.
@davidlambert6171
Жыл бұрын
Difficult to weld aluminum. Since they were going yo resell it, they just went with the easier fabrication choice.
@akokosk8
Жыл бұрын
Steel flex more and it returns to it’s original position, and if you pass that point you can “bush repair” it with a hammer or a rock. Aluminium, if you go further certain point breaks. Aluminium bashplates, some times break throught by sharp rocks. Also steel it’s easier to weld
Hi, could u upload the full programme pls?
Great work! But 6mm is way too much in my opinion
So; no mention of recalibrating the speedometer or changing the drive gears to reflect the increased wheel diameter. Also, did they include a replacement spare?🤔
Good work, but how are you going to remove the winch if it breaks😢
@davidsaunders3910
Жыл бұрын
Take the bumper off?
@joeyi0607
Жыл бұрын
@@davidsaunders3910 I guess you can. But;;;;;
Mine has the same wheels
Hi guys! I want to see how you restore a Nissan wd21!!!!
I wonder if Elvis recalibrated the speedo as bigger rims mean more revolutions.
Hilarious!!
❤❤❤❤❤
6mm steel ? Bloody 'ell that's overkill.
@peterbarber7613
Жыл бұрын
Doug Green. If you look at most pre-made bullbars they are heavier than 6mm
@Doug791
Жыл бұрын
@@peterbarber7613 I would have aluminium , I should have said in my op.
Undercoating on trusty vehicles makes themrust faster, you need a oil based product in those cases
you could see that understeer I na straight line with that extra 100kg on the front end 🤣
Snorkel top is on backwards
@franktaeterUSA
Жыл бұрын
Boost intake..😂
What a mess that Pajero looks now, should of kept it orginal as possible
@universeltuto7620
28 күн бұрын
Yes !!
How much you sold the car ?
@twinsonic
Жыл бұрын
£5995
👍👏👏👏
First comment from a Pajero lover
Elvis f@#ked up the bumper. Welded the fairlead opening upside down. One shot the slots at the top of the bumper,final shot the slots at the bottom.school boy error.
👋
6 mm steel? Isn’t that more for building a boat?
@AaroKeipi
Жыл бұрын
6mm was definitely overkill. 3 or 4mm would likely have sufficed, especially since the purpose of a bumper is not to stay rigid in case of an accident. But it def looks good though!
@anderspedersen7488
Жыл бұрын
@@AaroKeipi Nothing wrong with the shape!
@MGMutt
Жыл бұрын
@@AaroKeipi I believe he probably wanted the strength for the winch, but would have been better to do a box section frame to mount that to, with much thinner sheet for the rest of it.
What happened to the other tall person?
❤🎉😮
Spanos please.
I really wish they would concentrate on finishing classic line/play sets (slimepit fright zone) and vehicles (dragon walker attak track battle ram) before they bother with rubbish like the powers of grayskull line. So want a mantisaur and modulok also. Fingers crossed
Very popular in Brrrrr Brrrrrrr Brrrrrrrrrr Bradfud innit for jewlry shop grand enterance and dash
💪🙂👌
Still not great Pajero in Spanish language...
👏👏👏👌👍
Edd china 😢
@wimspreeuwenberg2516
Жыл бұрын
Is a fake mechanic
Think that bumper looks awful
Pajero,Montegro, Shogun junk with many names
@lopantolulu
Жыл бұрын
eat a duck hater
Fix the steering to the right side and you got yourself a buyer
@turquoisecat761
Жыл бұрын
D'oh It's on the right side, as opposed to the left side.
Why do they sell their vehicles for little to no profit? I mean 600 bucks profit is nothing