As someone who has built control panels, this video makes it so easy, you will not be needing your engineer's pocket reference booklet while on site. Upmation has won me over for good

@Upmation

2 жыл бұрын

Awesome! It's amazing to hear that! Please let us know if you have any kind of suggestions. Thank you for you support!

@jmsule9367

2 жыл бұрын

@@Upmation I trust you will exhaust everything there is to know as the series unfolds. Just remember to highlight the importance of proper wire arrangement inside the panel. Engineers are fond of running wires along the shortest path without any consideration for beauty and aesthetics. Looking forward with excitement to the next video

The quality and detail level of upmation videos are out of this world. In their videos nothing is assumed as "common knowledge" and this is the best way to teach. Each tutorial is worth a couple of grands in my opinion.

@Upmation

2 жыл бұрын

Wow! Thank you, Gurpreet! It's amazing to hear that!

I would never dream to have such a good detailed video! Thank you Upmation!

@Upmation

2 жыл бұрын

You're very welcome! Great to hear that and thank you for watching! Please stay tuned and share this video with your friends and colleagues.

Excellent demonstration. Please keep uploading more & more videos. So helpful

Hi my friend!This is very important information!!! Thank you for your hard work! It's a pity that I can only put one like:)

@Upmation

2 жыл бұрын

Thank you very much for your support! It's so nice of you! Amazing to hear that!

Very interesting content. Thank you for your video!

@Upmation

2 жыл бұрын

Hi, Wasim! Thank you for providing feedback to us. Great it could help you.

Engineers design and the electrician builds the job,waiting for your next video.

@Upmation

2 жыл бұрын

Yes! Please stay with us and the next part will be published soon! Thank you!

Excellent video and content. Thank you!

@Upmation

7 ай бұрын

You're very welcome! Thank you for watching.

very informative！ thanks！

very helpful and practical material.

@Upmation

2 жыл бұрын

Glad you think so! Thank you! Please stay tuned for more of these videos.

Very Nice!

So helpful!

@Upmation

2 жыл бұрын

Great to hear that!

Good explanation

Always good video 👍

@Upmation

2 жыл бұрын

Thank you for watching!

Great channel

Very great video dear engineer👍

@Upmation

2 жыл бұрын

Thank you! Cheers!

Thanks and regards

Great ... I will share it

@Upmation

Жыл бұрын

Hey, Mahmoud! Thanks for sharing! Hope your friends like it as well.

Thank you

Hi. First of all great video. Its very well explained and illustrated and very helpful to us as we have been manufacturing panel enclosures since years. I do have following suggestion: Can you touch upon various softwares used in the panel build process? We are currently using AutoCAD to prepare flat patterns by manual calculations. Are there any other helpful softwares to achieve this faster?

@Upmation

Жыл бұрын

Hi, Omkar! Thank you for your comment. Yes, I believe there are a handful of software in this regard. I will transfer your great suggestion to the team for the next videos.

Very useful Thank u

@Upmation

2 жыл бұрын

You're very welcome, Trevor! Please let us know if you have any suggestions or questions.

Wow to read elec drawing .

How can I learn to make the control panel as you have done

how to read electrical wiring and diagram of low voltage panel, please sir

Nice video

@Upmation

2 жыл бұрын

Thank you very much! :)

thanks so Mach

@Upmation

2 жыл бұрын

You're very welcome!

Like you voice !

@Upmation

2 жыл бұрын

Thank you! :)

How to size control panel dimensions before detailed drawings of panel components

@Upmation

2 жыл бұрын

You need experience! and a piece of paper to estimate the components you'll need on that panel. Consider some more space than what you are estimating. However, I believe it is definitely a part of detailed design phase and should be considered AFTER the drawing gets completed.

What is electrical panel anchoring?

Hi Friend! Explain the Electrical Wiring Systems and Methods of Electrical Wiring.

@Upmation

2 жыл бұрын

Hey! We have some videos in this regard, like the following: How to Read Electrical Wiring Diagrams: kzread.info/dash/bejne/eXycxduBaZzPnqg.html

Super

@Upmation

2 жыл бұрын

Thanks! Please let us know if you have any questions or suggestions and share this video with your friends in other social media.

good

@truongnguyenanh5423

Жыл бұрын

good job

thanx

@Upmation

2 жыл бұрын

Hey! You're welcome!

Goods

We want to put All motor SPECIFICATION and classification

Something to add - Gland plates aren't always metal - where high current circuits are connected using single core cables unwanted eddy currents are induced in ferrous gland plates. By selecting a gland plate made of non-ferrous materials (brass & aluminium are common) this is avoided. It also has the advantage of making it easier to drill the holes...

@Upmation

Жыл бұрын

That was a great point you added! Thank you, Andrew! By the way, hope you've liked the video.

@RizwanKhan_99

7 ай бұрын

Wow! never knew that. But I'm confused; aren't brass and aluminum also metal? And gland plates are earthed, so doesn't that earths the eddy currents? How high has the current need to be to induce the eddies in the gland plate?

👌

Please recommend to me sir

❤

We provide the electrical cabinet roll forming machine, do you need? machine video: kzread.infoXdeGub-cQ9s

Hii sir

How can I make video likes you

you guys should have other ways to get donations, like membership on youtube. I really do not feel comfortable to put my credit card on the ko-fi

@Upmation

2 жыл бұрын

Hi Diego! Thank you for the feedback! We definitely consider your input and try to find another way around for getting donations. We did not get any donations yet and it might be due to that.

In which programm have you did this animation?