In this episode I continue working on the new electrical project in our large shed/barn. I install the boxes, and pull all the wire to each box. This was the toughest part and required lots of up and down the ladder, and getting into some tough spots. I manage to get everything in place, and all that is left to do is wire in my outlets, and finally the subpanel. Stay tuned for the next two episodes! If you haven't already, hit that like button, and subscribe for future content. Also please feel free to leave a comment below. Thank you for watching.
Disclaimer: It is not stated in the video but I am not a certified electrician. Before attempting something like this make sure you have turned off the power to the location your working in. Switch off the breaker, and test the line with a tester prior to proceeding. My panel was wired but my breaker was turned off at the main panel. Always check and make sure!
SUBSCRIPTION LINK : / @northernoutlier
Music:
1- • ❰Chillout❱ Sappheiros ...
2- "AERØHEAD - Fragments" is under a Creative Commons (CC BY-SA 3.0) license
/ aer%c3%98head
Music promoted by BreakingCopyright: bit.ly/b-fragments
Materials & Tools I used in this Video:
1. Outlet Box (3 Hub) - www.homedepot.ca/product/red-...
2. Outlet Box (5 Hub) - www.homedepot.ca/product/red-...
3. 10/2 nmwu Wire - www.homedepot.ca/product/sout...
4. S3 Electrical Staples - covalin.ca/collections/staple...
5. Dewalt Framing Nailer - www.amazon.ca/gp/product/B00J...
6. Dewalt Drill - www.amazon.ca/gp/product/B01D...
7. Dewalt Linesman Pliers - www.homedepot.ca/product/dewa...