Please sir can u teach me sir

Veey cool. My Dad used to have his own shop doing this when I was little. We always had copper wire around the house. ❤

Good job

So eye soothing and peaceful it was.

Absolutely amazing ! Thanks for creating this content 😊

AWESOME 😎

good job realy amazing

Good job it's amazing

I find this so relaxing to watch!

Good job I like the way you insulate the wires

I was rewinding motors about 20 years ago,that one in the video is a 2 pole lap wound 3 phase star connected electric motor. A client my boss rewound then for wanted the insides of the motor housings & the ends of the rotors painted with Isonel varnish for additional insulation (for an arc shield in the event that a winding may blow out & arc out to earth ) !

@abhinabhi1991

Жыл бұрын

Its a 4 pole winding. Not 2pole

@xenomedes

4 ай бұрын

Přesně 4 pól 36 drážek krok 8,10,12 zapojení Y6 výv 😊

Good work sab.iam interested.

Good job they doing like I m doing i appreciate my job

This is how we did it back in the day, nothing amazing about it.

At 2:36 , how did he manage to round the wires, then he winded the wire. How come it was circulating despite not getting apart? At 4:00 where does these wire segment came from?

A *real* technician would have sanded, spliced, and re-enameled all that old wire..

It's Star connection. 👍

Good

आपकी दुकान कहां है भाई? मेरेकु ए कम ट्रेनिंग देथे भाई?

Beautiful winding. Years of hard practice. Say hai to camera📷 man also. From KERALA, INDIA🇮🇳

Is it my job l love,s

Ya ka ha pe srji mai anachahatahu❤❤

Mombasa Kenya

True professional. Thanks man!

@mechanicalwork78

7 ай бұрын

Thanks

very nice video

How did u get the slots,the length and the number of turns

Take my salam assalamualaikum,good rewinding, how to increas in channel.

Incredible tutorial Winding 3 phase motor dynamo.. Testing.. 8:34

@yusufozbunar1681

Ай бұрын

1500 d/d 👍

Amazing and good job

very nice work my friend

@mechanicalwork78

Ай бұрын

Many thanks

Excellent job

@mechanicalwork78

8 ай бұрын

Thank you very much!

Thanks MR .... i have a question? how do you come up with those wires that you are connecting at the back

Great video tutorial 👍♥️ thank you for sharing your knowledge ♥️🇵🇭

@mechanicalwork78

9 ай бұрын

Thank You

@ranidujp5560

7 ай бұрын

Really really worth

you country

The inside isn’t even cleaned out and you just slide new insulator paper over all that crap? The motor may spin, but not effectively or for long. You have the experience, so why not clean it up get out all old insulation and clean metal BEFORE continuing?

What"s amazing technique? I was doing that when i was 18 years old, i am 69 now.

@JennyMaryb

25 күн бұрын

Good job sir boss

How to conect sir

U must read comments

Good job bro but i need you give how to servis angker (easy then undestand)

@maureenborromeo1547

Жыл бұрын

)

I'm feeling like a plate of spaghetti now.

How many houspower is this and how many turns is this

If your not Putting these Stators in a vacuum pot when You Varnish the windings you arent doing it right they will never last the windings will eventually short in the slots due to vibration. This is the half ass way to rewind motors .No baker test no core loss test Not even a Hi-pot test Just Janky

Single layer winding or double layer winding??

how did you know that is the right number of turns?

I have a couple of questions. Is that wire solid copper? Did you replace the bearings? Was that real time?

@GrimReaping

7 ай бұрын

The wire is copper, but its coated to prevent arcs. Also, this wasnt real time. This process takes atleast 2 hours for a professional with correct tooling (for this size motor).

❤❤❤❤❤help me bro

Why are there 3 different diameter coils?

I want to learn motor winding ? How ?

Like

Which gauge wire used which pole to which pole kuch bathavo

How much k w this moter

Great video!! Really appreciated it! I'd have a couple of questions: What did you use for tighten the windings? What material are those strings and wrappings? And at the very end what did you brush on them? Thaaanks!

@RussellBooth1977

Жыл бұрын

I can answer that, he's only using the cotton wrap to tighten the windings which has an alkalyd type of air dry brush on varnish applied to it. I was winding them 20 years ago using the dip & bake process after we heated up the whole motor frame in the baking oven,it was dipped in the same sort of varnish until the bubbles stopped rising to the surface because the varnish would soak in & displace the air trapped inside the winding,we would brush a Teflon coating on the end shield spigots before dipping.the whole winding & frame but. After the excess varnish had dripped off the frame of the motor we would bake it in the oven for about 1-2 hours to cure the varnish. The larger workshops would use a VPI (vacuum tank impregnation) to force air out of the windings then varnish into them.!

Ok😅

Best company motor 1 hp (monoblock) winding data send me... Pls

What kind of palstic did you insert? 2:11

@pelaaja191

Жыл бұрын

paperi!? mayby?? i not sure eiter.

@youngplayboy786

Жыл бұрын

It's looking like F class paper.

@abhinabhi1991

Жыл бұрын

​@@youngplayboy786 no.its a class b polyester filim.

@pelaaja191

Жыл бұрын

@@abhinabhi1991 Definutly paapre!

06:04 what... The hell are you doing? Is that Insulation varnish prosess which you complete with paint brush 🖌️?

Where are you located

Hello Selam where is thus production can you reply me by email please

How to get specs needed?

@theronbussue7908

Жыл бұрын

when you find out can you let me know please

Please 🙏 sath btaya bhi krein aesy koi fayada ni hy

Is there any way I could get a contact number of this person?

06:04 after that complete this shit prosess, How long you give Warranty Time Puriod. 2 minutes or 5 minutes warranty?

@abhinabhi1991

Жыл бұрын

5 min,only if you dare to ask the word 'warrenty'😀

Mu sa kuch bolo b, yun e shugal mela lgya hoa hai

How can I contact you

Good