Dit is wel echt gaaf gedaan !

@maakmeneer

12 күн бұрын

Dank je!

Gaaf gemaakt! Super leuk om te zien hoe je de Maakplek gebruikt hebt!

This upgrade should work fine provided the correct power output hove board motors are used,

I need friends like this

Badass!!

...EXELENTE....

You can use 4.00-5 tyres. It's narrower but longer. 4 inches wide and 4 inches lap hight. Have 5 inc rim hole. It's cheaper also

отлично) тоже планирую похожий транспорт)

100th subscriber!!

Fantástico. Você tem algum vídeo mostrando o teste em subidas, ou montanhas para avaliar o desempenho em offroad? Abraços desde o Brasil. Mais um inscrito.

@maakmeneer

Жыл бұрын

Unfortunately we don't have any mountains or very steep hills in the Netherlands, so I don't have any experience on that performance. I will try and shoot some off-road performance videos once the weather improves a little.

@andremurilodiasdesouza3848

Жыл бұрын

@@maakmeneer Thank you. As the alternative way maybe some stairs with wood board or access ramp can be used. I am Vey excited to know the performance from it since i am also building one by hacking hovernoard Motherboard cards. I think yours is Very strong. Here in Brasil some guy was built an "Hexaciclo" (Alberto Tecnologia Chanel).

thats so cool, well done! what motors are you using

@maakmeneer

Жыл бұрын

These are motors from old hoverboards. These are brushless dc (bldc) motors of about 300 watt each.

@scedab

Жыл бұрын

@@maakmeneer I'm going to try and convert a golf trollery and think these motors may be perfect. very sorry I cant speak your language, happy christmas, or whatever you celebrate

@maakmeneer

Жыл бұрын

@@scedab I just created English subtitles for the makers that are non-dutch ;-)

Mooi gemaakt! ik maak toevallig een zelfde soort voertuig van een vintage skelter en 4x hoverboard motor. Ik heb dezelfde banden en zie veel overeenkomsten. Wat voor controllers gebruik je? Ik heb nu een 1500w 36v controller die alle 4 de motoren tegelijk aanstuurt. Dat werkt goed in een testopstelling maar ik krijg de opmerking dat het niet zal gaan wanneer ik ze ga belasten met gewicht ivm clogging. Individueel aansturen is dus de volgende stap..

@maakmeneer

Жыл бұрын

Ik gebruik 4 losse controllers van 350w elk. Wel allemaal aangesloten op 1 gashandle. Ik heb gemerkt dat de hall sensors echt aangesloten moeten zijn anders gaat het met belasting niet of slecht werken. Meerdere motoren parrallel aansluiten lijkt in theorie en testopstelling te kunnen maar gaat in praktijk problemen geven doordat de motoren bij het afremmen elkaar gaan aansturen (ze gaan stroom opwekken).

@markv256

Жыл бұрын

@@maakmeneer ik heb het inmiddels ook aangepast naar 4 losse controllers van 350w. Dat is inderdaad een must.

@markv256

Жыл бұрын

kzread.info/dash/bejne/pYyOq5SBdNrRZbQ.html hier een video van mijn versie.

@maakmeneer

Жыл бұрын

@@markv256 cool! Kinderen vermaken zich er prima mee zie ik 👍😀

Do you have a reverse gear as well, or only moving forward?

@maakmeneer

Жыл бұрын

Only forward for this one, though reverse shouldn't be a problem when the controllers support that

cool project does 4 motor connected paralel to one bldc controller

@maakmeneer

9 ай бұрын

There are 4 bldc controllers connected to 1 throttle, one controller to 4 motors will not work.

What tires did you use? 4.10/3.50-5? They are very rare and expensive. Will 11/4.00-5 fit? Thank you!!!

@maakmeneer

Жыл бұрын

I indeed used 4.10/3.50-5 . They are quite expensive, I think because they are used in mobility scooters a lot and everything with the term "medical" is way overpriced if you ask me. You can find some from china but time has to be your friend ;-) I think the 11/4.00-5 will not fit because the rim size seems way larger. I can double-check tomorrow.

Wat heb ik nodig voor rc te maken Zender en ontvang heb all Accu heb ik ook Ik heb 4 wielen het is voor mijn grasmaaier

@maakmeneer

20 күн бұрын

check github.com/EFeru/hoverboard-firmware-hack-FOC

I'm currently working on a project similar to yours, and i have a question. How did you solve the rear wheel differential?

@maakmeneer

7 ай бұрын

Hello, every wheel is powered independently, the motors are in the wheels. Therefore there is no differential and it is also not needed because everery wheel can turn faster or slower than the others if needed.

@user-sg7rg9oq1s

7 ай бұрын

@maakmeneer Oh, then does that mean even without any mathematical calculations for solving spin ratios for wheel differentials, the system will work fine?

@maakmeneer

7 ай бұрын

@@user-sg7rg9oq1s yes, every wheel can spin faster or slower at any time, so calculations are not needed.

@user-gk8os6wx6b

7 ай бұрын

Какой диференциал при мотор колесах?!

@maakmeneer

7 ай бұрын

@@user-gk8os6wx6b there is indeed no differential needed with this design since every wheel is it's own motor

hello , please can i ask you? Which controller you use for motor of hoverboard. Do you have a specificataion or some link where you buy it? thanks.

@maakmeneer

2 ай бұрын

For this project I used 4 generic 300 watt BLDC e-bike/scooter controllers from a Chinese supplier. For later projects I used the original motor controllers from the hoverboard with modified firmware : github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Variant-HOVERCAR

I wish this was in English

@maakmeneer

Ай бұрын

I made subtitles in English for the international viewers

I also tried to mount the hoverboard motors on those tyres, but when you inflate them they go out of the rim, they only work if they are very loose, does the same thing happen to you too?

@maakmeneer

9 ай бұрын

I think you didn't use 5" tires or the motors are smaller

@fedemon76

9 ай бұрын

@@maakmeneercan you share motor an wheel size? I used 6,5" motors and 4x3,5 tires

@repareermeneer3853

9 ай бұрын

@@fedemon76 I used 6,5 Inch hoverboard motors, but this size is with the standard solid rubber tires still in place. When these are removed the rims are only 5 inch. The tires I used are 4.10/3.50-5 but it i recommend to measure your rim size before getting the tires.

@fedemon76

9 ай бұрын

@@repareermeneer3853 I used the same tires but if I inflate strong tires goes out the rim

@maakmeneer

9 ай бұрын

@@fedemon76 maybe your rims are smaller than the ones I used. I've converted several more wheels with the same tires and I can inflate them all to the max of 2 bars without any problems.

What esc are you using? It is controll all 4 wheel? Thanks

@maakmeneer

10 ай бұрын

All 4 wheels are powered with Chinese e-bike/scooter controllers connected to the same throttle and brake switch in the brake handle. You could also use the stock controllers with modified firmware, but that takes some knowledge about electronics and programming.

@danieldane3719

4 ай бұрын

Do you have a Link or somerhing? Were do you buyed the ESC?

@danieldane3719

4 ай бұрын

Do you have a Link or somerhing? Were do you buyed the ESC?

Vet project!!, was het lastig installeren die wielen op dat AliExpress regelaar kastje? Heeft u een link van de aansturing van AliExpress? Dat grijze kastje en de gas hendel. Ik heb er een nodig die twee van die oxboard wielen kan aandrijven.

@maakmeneer

14 күн бұрын

Hoi Lucas, dank je! De regelaars die ik heb gebruikt zijn generieke bldc regelaars voor en elektrische step of fiets. Het aansluiten hiervan is redelijk simpel, als je wilt mag je me mailen en zal ik het uitleggen met een schema.

@lucasankone9555

12 күн бұрын

@@maakmeneer ah bedankt, graag. Wat is u mail adres?

@maakmeneer

12 күн бұрын

@@lucasankone9555 dat is wouterrusman@gmail.com

Can u tell me about controller How much watt have in every controller You used 36v 350watt or 36v 500watt controller Please tell me Thank u

@maakmeneer

9 ай бұрын

I used 4x 350w controller. You can also modify the firmware of the original controllers to re-use them with a throttle and brake. Take a look here if you are interested : github.com/EFeru/hoverboard-firmware-hack-FOC#hardware

@SkateboarderPawan77

9 ай бұрын

@@maakmeneer thank u so much for your help I'm also trying to fix my eskateboard I used 2 hoverboard hub motor nd used 350controller but when i give throttle my controller automatically stop But I'll try until i get successful You are doing great work nd you have amazing brain full of knowledge

@SkateboarderPawan77

9 ай бұрын

I have hoverboard motherboard but don't know how to use it by potentiometer

@maakmeneer

9 ай бұрын

@@SkateboarderPawan77 Do your controllers also have reverse? because I think they will not "freewheel" if they also can reverse. Not sure, but just a hunch

@maakmeneer

9 ай бұрын

Also 1 controller on 2 motors will not work, especially if you also connected the hall sensors of both wheels.

Great work. Can you pls share me the full structural design of Frame / chassis with dimensions. i am planning for my kids . Pls share

@maakmeneer

4 ай бұрын

This is a reclaimed mini quad, sorry in have no drawings

Top speed? 🤔

@maakmeneer

Жыл бұрын

The top speed was about 35 km/h