EINHELL 2025 budget table saw modifications part 3
Тәжірибелік нұсқаулар және стиль
Here in my follow up video to my Einhell 2025 table saw project, I upgrade and modify the saw to suit my general wood working requirements.
DIY table saw upgrades.
Einhell tools.
Please subscribe my channel and like this video as its always appreciated. Thanks.
The saw I'm using amzn.to/3z130TN
Disclaimer: The links above are amazon affiliate links. If you use these links to make a purchase, I may earn a small commission at no additional charge to you which helps support the channel
Disclaimer; This video is for guidance only, as any project always wear the correct safety ppe and follow safety guidelines, I accept no responsibility for any injuries loss or damage occurred while following this video.
It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
Пікірлер: 14
Check out my other videos for my initial review and fence upgrade.
@richardhunter8958
10 ай бұрын
Sorry to bother you on sat last question we’re did you get clip at the end of the fence 😊
@micksmaintenanceanddiy
10 ай бұрын
@@richardhunter8958 Toggle clamp purchased via eBay.
@richardhunter8958
10 ай бұрын
@@micksmaintenanceanddiy Super stuff have a good weekend
Thanks for this video. I cant afford to buy a better table saw and every one of these entry level ones have the same problems. You've shown me how to fix literally all of them.
Just purchased the Updated Model and looks like I'll be adding some of your Mods, Especially like the Stop Extension, First thing I noticed when I used mine was how awkward it was to shut off which would be an issue if you needed to shut it off quick in an emergency. Thanks for the effort Mick 👍
*If this video was helpful please consider giving it a thumbs up like and subscribing.
Top man really help me !🎉
Thanks for these vids Mick. Just built mine last night & will mod the mitre fit, fence & kill switch just like you've done. Nice one :) What blade did you fit? Link would be useful if you have one. Cheers fella.
@micksmaintenanceanddiy
Жыл бұрын
The blade I used was a Freud table saw wood blade 40 t 250 x 30 x kerf = 2.8
We’re did you get the fence guide from please ?
@micksmaintenanceanddiy
10 ай бұрын
The rectangular steel I used for the fence build was purchased through a local steel stockist though there are many online metal stores available some will even cut to size requirements.
@richardhunter8958
10 ай бұрын
@@micksmaintenanceanddiy Thank you for getting back so quickly,the videos really helped me as I’m picking up saw today for some 50 mm beading to be cut in half, top man
Wouldn't it been better to have bought something better ftom the start?