Turbo Muffler Delete available here: goo.gl/I9VdP2

@PeterFeltersnatch852

4 жыл бұрын

Available where it's not on this link or the other Link in the description.. guess I'm just going to have to buy a CTS one then from CTS... You're lost their gain!! Learn how to post your products correctly ECS!! 👏👏👏

@cutch6805

4 жыл бұрын

Simple Man idk what your talking about lol I think your browser is messed because I can see all of them from the link🤷‍♂️

@TensaDLuffy1776

8 ай бұрын

Is it best to be done when changing the oil on my audi or what?

a few revs before and after install to hear the difference would have been a nice addition to the video.

@LeeVai666

7 жыл бұрын

***** ecs is only about 40 mins from me and ive gotten tons of parts through them for 2 previous audi cars ive owned. they deff make top notch parts, its just sad their install videos dont show the benefits of the parts.

@ricardocruz6880

6 жыл бұрын

Not a nice addition. A requirement. This video wasn't even good propaganda.

@avzalali4222

2 жыл бұрын

Trust

@bencox9262

2 жыл бұрын

It has a little bit of a difference for my car at least

Thank you for the suggestions everyone. The turbo sound will vary based on modifications to the vehicle including intakes, downpipes, and changes in boost pressure. We will try to include sound clips in future DIY videos.

@eeiko321

7 жыл бұрын

regarding sound for me, I had it installed in my 2.0T Audi A4 B8.5 and it didn't really increase it much, very slightly, even with increased boost with Stage II map. percentage wise, the spool sound probably increased approx. 10% only

@iwannawatchyoutube8826

4 жыл бұрын

@@eeiko321 so not really worth the price? im just starting modding my mk6 golf r and ive got a 3" dp with decat and im de resonating with a repacement pipe and keeping the stock muffler for now and tuning the engine and dsg box to stage 2. already have a cold air intake. Im surprised at how few videos of showing the difference in actual improvement in performance there are available, im annoyed at the ratings on manufacturers sites of increase of upto 10%... doesnt affect my life in anyway and id like to know if its worth upgrading some one part while saving up for others of if im saving up for everything at once... Ive got a friend who does vag tunes so i get the tunes done for free so doesnt matter how many individual mods i do...

@eeiko321

4 жыл бұрын

Well it is pricey for what it is. It may increase the sound / or should I say; get more out of sound if you have a pod filter. I personally don’t like pods as they’re subjected to more heat soak and there’s never real Independent proof of them Giving you gains. Well the muffler delete may help spool, maybe a bit quicker. But nothing really noticeable when driving

How about a before and after huh?

Nice! Definitely the best turbo muffler install on the interwebs to date. Exactly what I needed thanks!

@ecstuning

7 жыл бұрын

Glad it was helpful for you!

Just installed this on 2016 Audi A3 2.0T Quattro; overall the install is straightforward. I found that having 5mm Allen L-Key helped with the bottom bolt for removal and reinstallation. The big time suck was the factory turbo housing O-ring. Props to ECS for including an extra with the kit I got; old one was a bit beat up. Grease that ring to get it to hold in place while lining up delete pipe; wasted a lot of time trying over and over again to place the ring and pipe just to have it slip at the last moment. Dab of grease kept it in place and let it slide when rotating pipe to line up mounting holes. After that it was smooth sailing. Turbo more woosh good. Thanks ECS!

I've bought a few ECS branded mods including the turbo muffler delete and their manifold boost tap. I have to say I'm thoroughly impressed with the quality at a great price point. Thanks ECS!

@ecstuning

7 жыл бұрын

Thanks for the feedback!

@cammgt3rs370

4 жыл бұрын

I have their Downpipe on my 2012 A4, Very nicely done.

As stated below - a few revs before and after would probably help drive sales.

Just installed the ECS Turbo Muffler Delete Pipe and ECS Silicone Connecting Tube on my 2016 Audi A3 Quattro. I actually used another KZread video as a guideline that took me through removing the intake tubing/airbox. I'm a bit surprised the ECS video omitted that important part. Removing the OEM hose clamps from the OEM connector hose on the OEM turbo muffler pipe was a PITA. Used a 7mm open end wrench on those. The bolts holding the OEM turbo muffler on are 5mm not 4mm. The T30 torx bit works fine in place of a 5mm bit. I had to chuckle when I saw the bottom 5mm bolt had already been removed. I used a 5 mm allen head wrench and several 4 letter words to remove the bottom bolt.

@ryanhalvorsen6497

3 жыл бұрын

I'm about to do this... Was it worth it? Is this just for the noise or is there anything gained here?

@MrAlexwhead

2 жыл бұрын

Lol! 4 years late but your comment makes no sense. He's literally working on a completely different engine so of course the fittings are different 😂😂

@whydontyouaskme

2 жыл бұрын

@@MrAlexwhead 😂 he had to watch a video on removing the air box 🤣

You’ve made it look so much easier than other accounts. Saving me so much time!

@ecstuning

Жыл бұрын

No problem!

@thomaswilkie1168

11 ай бұрын

It's easier when the hose clamps are easier to access because you aren't using the stock coupler and can change the position of the clamps to suit and the Turbo muffle delete bolts are what looks to be finger tight. Intake in the way? Not if you remove it off camera!

I just want a shop this clean.

same for a CCTA 09 2.0TSI ? Just getting back into the vdub scene.

If you came here to do this on an Audi B8 or B8.5 then take the skid plate off from under the car and it’s located on the passenger side. Very easy install. Bing bang boom and you’re done. Only thing that gave me trouble was getting the o-ring to stay in place while putting the turbo muffler delete on.

@lysias55

6 жыл бұрын

Why so Testi could’ve used a thin layer or silicon grease to hold it in place

@whysotesti3066

6 жыл бұрын

Evan Watty yea that’s what I ended up doing.

@mrpullings4490

Жыл бұрын

Is there a rise in sound noticeable? Is it worth it?

@whysotesti3066

Жыл бұрын

@@mrpullings4490 youre not going to get the sound you want. so prob not worth it. But there is small difference.

@stavrcj

5 ай бұрын

The turbo mufflers 3 5mm hex bolts are so tight I can’t get them off

i know i'm probably a small percentage, but could you make some videos covering the mqb tiguan?

Appreciate the videos, can we get them more often ?

I need a install vid for the a4 audi. Is this at the end of the air intake ? Can somebody help me?

Is there an install video for the FSI engine?

Can I put this on if I already have the diverter valve spacer? Won’t cause no problems? Cel?

Will you guys be making one for a Jetta 1.4 TSI?

Isnt it a 5 mm for the TMD bolts?

what about a 2016 jetta tsi 1.8t,will it it fit or is there a different one?

Can you Guys show this install on a gen3 1.8t tsi for Passat 2015-17.

Will this work for 2019 Jetta 1.4t ?

Does the mk6 gti have this same option? Hard to find videos about it.

Does the 2006 a4 s line 2.0t sfi have a turbo muffler?

my o ring broke. do i still need it?

What’s better ? A turbo muffler delete or a blowoff value ?

Does this part apply to a 1.4 tfsi Audi A3?

Does anyone understand how hard this shit is!!!!! I’ve been messing around with this for the past 4 hours!!!!!!Dammit!!!

Please could you let me know if the oem Turbo Muffler has a O ring? I had a Racingline turbo muffler delete which came with a oring on it for a year and I can’t remember if I needed an o ring for the original. I reinstalled the original but I just wanted to double check before I start having leaks. Thanks so much.

At least the turbo is more accessible on the Audi's. One key thing they left out is you will be doing a whole lot of swearing due to the hidden bolts you have to deal with on the way.

Does this work for the 2011 Audi Q5 2.0T?

What are the specs on those wheels? thanks

i'm pretty late here but hopefully someone sees this... if i'm gonna do the muffler delete and the turbo inlet would it be wise to do them at the same time? looks like you'd have some more clearance for the three bolts on the muffler delete without the inlet elbow there

@ecstuning

4 жыл бұрын

Might as well get it done while you are in there! Getting a silicone TIP will free up some room and make the car breathe and sound better

Someone should make a video on this for an Audi A4 b7, because I found where my delete is but it doesn’t have the 3 bolts as shown everywhere else ;(

@iangillott

5 жыл бұрын

You can't on the B7 it's sealed.

No longer able to find this product.

is this specific for the gti? I've got a golf and would like to do this but not a gti

@ecstuning

7 жыл бұрын

This part fits many VW/Audi vehicles. There's more information about vehicle fitment here: goo.gl/I9VdP2 Fits: VW MK7 GTI (2015+) VW MK7 Golf R (2015+) VW MK7 Golf 1.8T Gen3 (2015+) Audi 8V A3 2014+ Audi 8V S3 2015+

They never make a anything for the jetta 1.4 tsi

hey so the gasket inside the turbo (factory o ring) fell off when i was changing mine and no longer fits where can i buy a new one??

do these fit 1.2 ltr tdi blue motion polo

this brings me a question. does that slot pull dirt in bypassing the filter? it makes sense to me...

@eden4949

Жыл бұрын

I think there intake pipe after the turbo is on top of those slots, else if wouldn't really be a muffler (as the noise would escape into the atmosphere through those holes) At least that's the way it is on my 2.0 TDI (GTD) The turbo outlet (the thing they call muffler delete here) looks a little different for the diesel engine though.

Will this work with the 2.0 tdi?

What, no sound clip?

Do y'all make videos for the fsi???

Question is this the same on the 2.0 tdi

Is gasket required or no?

Sound???

Is the stock o ring that in the turbo must be applicated cause it dropped over the engine and i just installed without it will it gonna make any boost leaks or somthing? (O ring in the TMD is installed)

@mk6_mark920

3 жыл бұрын

I never installed that o-ring either mine wouldn’t stay on

@Abdullah-ry2wq

3 жыл бұрын

@@mk6_mark920 i bought a new after a while and i installed it again, you need to put a little bit of grease to make stay in the turbo

I get a p234 overboost code, everything is installed correctly, when I clear the code it seems more responsive and have more of the turbo sound but 4 seconds later while getting on the throttle it throws the code and the Jetta seems to be going into limp mode or just not as responsive like it has no boost checked o ring 2 times and hoses and clamps 3 times still the same issue even after disconnecting the battery, I’m sure it’ll go back to normal if I put the stock turbo muffler back in but what can I do to keep the delete and make it run normal Lmaoo

@connorcavacarazy8327

2 жыл бұрын

You could have a broken diverter valve or dirty MAP Sensor. I think... get crc sensor clean take MAP out and clean let dry completely and see if that helped. If not it might be your DV.

Can this be done on a 2010 A4 1.8 tfsi?

is this only for the mk7 vehicles? or is this for the mk6 ti as well?

@ecstuning

7 жыл бұрын

This is for the MK7/MQB TSI engines, but keep your eyes open for a MK6 TSI version shortly.

Does this work for 1.4t 2019 Jetta s

My dude get some sleep you looks very sleepy 😴 but I love the product and design I will be getting one for sure

Anyone know which wheels are on the GTI in the video? Thanks

@ecstuning

5 жыл бұрын

They're these! bit.ly/2zRrfWF

Can u have this installed along with a blowoff valve or wastegate?

@micjubba709

5 жыл бұрын

Yeah but need a modified charge pipe can buy silicone ones on eBay easy to put on

which one works on the 2016 audi Q3?

@ecstuning

7 жыл бұрын

The Turbo Muffler Delete featured in the video will work on the 2.0T Audi Q3.

Hi bro, congratulations for the video and since I'm also on the subject of modifications I wanted to ask you if this kit is applicable to a 2011 Audi TT8j3 1.8 tsi Thanks in advance

Any horsepower ? Any performance or something?

will it work on my 2010 vw cc 2.0

@NovaBeatsProductions

3 жыл бұрын

if it’s a 2.0T TSI which i’m assuming it is, then yes

So what’s the difference between this and Diverter valve Spacer ?

@MercSLRFan

11 ай бұрын

They are two different parts doing completely different things.

Does this work for the 1.8t?

@bmxboy845

5 жыл бұрын

Yes

does the 2.0t Fsi have one ?

@ecstuning

7 жыл бұрын

Yes, the 2.0T FSI has a turbo muffler.

What is the purpose of the slots on the OEM unit?

@kapii86

6 ай бұрын

the slots disrupt air flow a little making it both a bit quieter and since it disrupts air flow it can very VERY slightly bottleneck air flow, with this mod i havent noticed any performance gain its mostly just for whooshy turbo sounds :D

what is the function of it

@Ludhuile

7 жыл бұрын

read description. yw

Why can I not find any videos for the turbo muffler delete for the FSI

@zackobrien2223

6 жыл бұрын

Mike Palmer did you find one yet?

@mikepalmer1770

6 жыл бұрын

zack obrien no I didn't I did notice the easiest way to get to it it's going through the passenger wheel well

@zackobrien2223

6 жыл бұрын

Mike Palmer Awesome, thanks for the info! I am looking to do this to my 2008 A3 (has a CAI on it already) and was wondering your opinion on if you found the turbo muffler delete to be worth the money you spent for it

Will it fit a CC?

@ecstuning

7 жыл бұрын

This particular kit will not, but we should have one for the 2.0T TSI found in the CC soon.

The standard turbo muffler will cause to loose boost then with them slots in stupid design the ecs muffler loads better

NO INCLUDED SOUND CLIP??????

At 3:44 ouch!!!! Lol great video thanks

Will it work for the 2.0 TDI (CJAA/CBEA engine codes)

@ecstuning

7 жыл бұрын

We offer a Nuespeed version which fits CJAA engine code. Here's a link: goo.gl/TahpN9 Fits: MK5 Jetta TDI, MK6 Jetta TDI, MK6 Golf TDI, and MK6 Jetta SportWagen TDI. Hope this helps!

keeping the o-ring in place...nearly impossible

@usa5046

4 жыл бұрын

You need to use a little grease to keep it in place small amount helps

@SpeedWhomp420

3 жыл бұрын

Yeah how was this just glossed over? I’ve spent an hour trying to get that stupid thing to stay. Thinking of just installing without it

@mk6_mark920

3 жыл бұрын

@@SpeedWhomp420 I installed without it no issues yet

@SpeedWhomp420

3 жыл бұрын

Mk6 _mark I ended up using a little grease to get it to stick. Super easy with that.

@Zupra95

3 жыл бұрын

Thank goodness for the comments lmao

I hate that you guys never add a sound clips before and after... cmon

do you also deliver to Germany ?

@richardburns9772

3 жыл бұрын

I’m sure they don’t deliver it, but UPS might.

is this for the diesel motor??

@eden4949

Жыл бұрын

No, however HG Motosport makes remade turbo outlets for 2.0 TDI engines. Have one mounted on my GTD the other day

Ez install

No sounds ???? Wtf

Anddddddddddd im buying it

Does the 2.0 Tiguan has this muffler in the turbo?

@ecstuning

7 жыл бұрын

Yes the Tiguan 2.0 TSI has a turbo muffler. This kit will not fit your car, but we should have one soon.

This was a well made video, glad i discovered this! There are not many videos about turbo stuff for VW. Only very smug VW owners who do a 5 second crappy sound test. Waste of space on youtube if you ask me.

You didn't use the rag to cover the intake pipe.

Couldnt you just pay a machine shop to just weld the original one smooth? Wouldnt that be cheaper?

Sooooooooo, In the unfortunate event that you lost that outer O ring were can you get another one D;

@ecstuning

6 жыл бұрын

Haha, I just had them add it to the site for individual purchase! goo.gl/MwrpL6

@MrOmar0021

6 жыл бұрын

This link says this part don't exist D;

@MrOmar0021

6 жыл бұрын

Never mind found it !!! ;D xD

Sooooo just going to do all that and not show how it sounds ? Okay.

Literally just tried to watch this video to see how they take the bottom screw out and they conveniently skipped over that part lol

All it does is make more noise. The throttle response BS is just that. Prove it make everything better. You may as well put speed holes in your car.

Won’t be bying one, because you didnt show a before and after. Get a new sales boss.

dodgy video, everything loose already? Making it look easier than it is so u can sell your product?