Got mine today; took 5 mins to install & another 5 to figure out how to setup the max speed limit. now for a test ride!

Active Line Plus. I did not end up needing to remove the crank arm to gain access to the wiring. The placement for the connectors to the motor varied from that in the video. I ended up having to loosen the motor from the bike frame to get enough wiggle room in the wiring to remove the plugs. First ride, on the dirt track behind my house, worked great.

@SpeedBoxTuning

3 жыл бұрын

Thank you for your positive feedback.

Now you can watch our new video including the B.Tuning version: kzread.info/dash/bejne/qZaGqK-xZMrAl9Y.html&ab_channel=SpeedBoxTuning

Seriously these things work - it’s fantastic

@SpeedBoxTuning

Жыл бұрын

Thanks for your positive feedback.

I have a Speedbox 3 fitted to my Scott emtb and have now clocked up 3800Km - everything works fine. One habit you must learn - is to NEVER turn off your display (let it time out) and NEVER plug your charger into the bike until the display has gone blank via its normal time out mechanism. If you turn off the display early, then you will trigger the Bosch anti hacking software on your bike which means a dealer reset.

@darkuniverse422

2 жыл бұрын

Did you have 1.5.0 Firmware

@runef7471

2 жыл бұрын

I sometimes get 503 error, even though i never turn off computer until it countes down to 0. Now I read that you say never to plug charger to bike until its off. I never heard anything about that. Can you tell what you know about that problem?

@oddjob4877

2 жыл бұрын

@@runef7471 , the Bosch gen 4 motors have anti hacking software. If you have a speed dongle fitted and you plug in your charger or before the display has fully reset it will trigger the anti hack lockout. Unfortunately I have discovered (the hard way!) that even though the display looks like it has timed down to zero the software doesn’t agree!! Consequently the only way to be absolutely sure that the software has correctly reset after a ride is to wait for the display to time out and go blank after a ride. Since I have taken this approach I have never had a problem. We have a number of Bosch powered bikes: our Haibike, Scott and Canyon bikes all are fitted with dongles, and I can report that waiting for the system to go to sleep is foolproof. Hope this helps.

@runef7471

2 жыл бұрын

@@oddjob4877 great !! Then that might be my problem. Thanks m8 :)

@luisramos3102

2 жыл бұрын

@@oddjob4877 What if the battery runs out and I don't have time to wait to turn it off?

Excellent product,v easy to fit and worked as advertised,no more horrible drag on the gen 3 bosch,feels like how an ebike should be.

@SpeedBoxTuning

3 жыл бұрын

Thank you sir.

@xmateinc

8 ай бұрын

maybe go to a bafang motor system. Bosch is for people that still like riding their bike.

I've got mine today, installed on Cube stereo hybrid 140, kiox display, easy to install, no problems with fitting wires, easy to set up, works fine! The only issue is that actually it gives you boost up to +/- 50 km/h on turbo mode, so no way you can ride much faster than 50 km/h. Still I am happy to have it, more options and more fun than speed limited to 25 km/h.

@jackewenv1199

Жыл бұрын

Your comment just sold it for me I have a cube stereo hybrid pro 500w hoping it gives me 50 too

@geu6270

Жыл бұрын

New speedbox 3 is unlimited speedbox 1 was 50kph which is pretty fast to get around traffic and such.

@OutdoorVeteranJones

3 ай бұрын

Hey mate! I hope i works for my cube stereo hybrid 140 hpc race too..

@user-pk9gm2ql7m

Ай бұрын

How long does the battery last though I imagine it goes super fast

Got it, installed it and had some trouble with the speed indicator connection. Installed it again. Worked like a charme. Walk mode is the on/off switch, so walk mode doesn't function anymore. I ride my bike, so that doesn't bother me. I have the 2020 Bosch CX Performance 4th gen and I have driven >200 km the last 2 weeks, even in some pretty bad weather. I love it!

@NetMillionaire

4 жыл бұрын

Will this Speedbox 3.0 work for Bosch Center Motor Performance line CX Gen 4?

@SpeedBoxTuning

3 жыл бұрын

@@NetMillionaire Yes, we confirm compatibility.

@jxfcrbh6623

3 жыл бұрын

How fast does it go, have you tested? I have the same motor

@vipmaqagoo

3 жыл бұрын

@@SpeedBoxTuning hi sell? Kit set ebike link have?

@nashk9720

2 жыл бұрын

@SpeedBox Tuning : I've not seen the performance I'd expected to gain after installing my SB3, best I've managed is low 50km/h's on a downward incline. Now I know I'm not fit enough to perform this on my own, so it IS working to some degree, but I expected the Pedal Assist to be much better than it is at lower speeds (I bought the SB becuz I am extremely unfit and required the additional assistance but it doesn't seem to be there). Do you have any thoughts about the lack of performance improvement I'm experiencing? Also, when j first purchased this bike (2nd hand), the previous owner had moved the speed sensor magnet onto the crank arm, and the sensor in a location to pick it up there. I changed this once I installed the SB and noticed - was there anything to gain from them doing this? I've ever since had troubles getting the speed sensor to pickup the magnet. I've tried a small cube length of neodymium stuck to the spoke, and also a regular bike computer screw on sensor, and neither is better than the other, I have to fiddle with the magnet and the speed sensor before each ride to get it working and prey it continues to work. I'd really appreciate some technical assistance/feedback from you guys as soon as you have the time. Cheers, Nash

I did not need to remove the crank arm on my 2020 Riese and Muller Delite. Just removed the two screws for the cover and voila simple install. First ride today and everything worked well. My bike does have the 85nm update. Thanks !!

@SpeedBoxTuning

3 жыл бұрын

Thank you very much for your positive feedback.

@Michi_L

Жыл бұрын

I also own a RM (Delite Mountain) and there was a RX Chip hidden inside the motor cover which i removed. Was it a problem to place the speedbox inside the cover? I think there is not much space...

@frankiehoosier9165

Жыл бұрын

What is the RX Chip for? To fit the SpeedBox just takes a little time to carefully pack it in the small space around the motor and secure it with a zip tie. The bike now has 9674 miles and haven’t had any problems.

@Michi_L

Жыл бұрын

@@frankiehoosier9165 the rx chip is a gps tracking device which comes with the bike

Installed mine back in January on the top of the range Trek Mountain bike. I have done at least 50 long rides with it without any problems at all, It just works every time. I don't know what the "leave on until 0 is shown" means. Sometimes I forget and turn it off straight away without waiting for 0, but it makes no difference, it still works normally every time.

@tekmekster

3 жыл бұрын

Do you remove battery for charging?

@johnkeefe55

3 жыл бұрын

@@tekmekster No just use the charging point on the bike. It all still operates perfectly now after 100 rides.

@metaljoseph

3 жыл бұрын

The reason that you should wait is that the Bosch system will know that the sea box is plugged in don’t wait. It’s a computer so it recognizes there’s something plugged in and work around from Bosch is that you wait till it says 0.0.If something happens to your motor god for bed, your warranty will be void.

Is there an english version of the program on the phone ? Also, VERY IMPORTANT can you set the % of power at each level Eco, tour, sport and turbo ???

For those of you wondering about the 504 Error, I rode my Trek Allant 2022 model for commuting and even after 700 miles of riding the error didn't occur. Don't avoid the countdown, as annoying as it is, it prevents the system from detecting the tuner for you. You can wait 5 min and it even auto shuts off. As long as you do what the speedbox organization directs you to do, you should be fine with the speedbox 3.0. Happy ebiking!!

@Ju-dn1jq

2 жыл бұрын

Hi there. Do you still are not getting the error code? Alencar here. Thanks

@nassiratti8542

2 жыл бұрын

@@Ju-dn1jq still no error, I use my Trek Allant 7s for doordashing and it’s a champ.

@len9483

2 жыл бұрын

@@nassiratti8542 Do you have to do all the steps as in the video at around 3:32? Seems a bit confusing. Thank you.

@nassiratti8542

2 жыл бұрын

@@len9483 if you have the gen 3 motor you may have to take the crank off, but with gen 4 motors there’s no need to take the crank off and you can simply take the cover off and install the chip.

@len9483

2 жыл бұрын

Thank you Nassiratta, but I was referring to scrolling through all the modes and pressing the up and down buttons to see the speeds.

Ok, nearly 50mph, downhill, on a Cannondale 26".. I was doing it every weekend.. absolute blast of fun!

@hugovuori4778

4 жыл бұрын

Destroys range?

@ingush1989

4 жыл бұрын

Is it worth to place it? I have bosch active line motor (36v-250w motor, 25km/h). My display is intuvia lcd display.

@jameswilson9011

3 жыл бұрын

dangerous af

@aryder151

3 жыл бұрын

Sorry guys, this was in 2012. It was a non-electric bike. The gears and the mountains allowed me to do that😁. Just got a cube acid hybrid 400, with Bosch motor 500w. It doesn't have gearing to go over 35mph..

@aryder151

3 жыл бұрын

I had an idea: on this ebike Cube acid 400, with mid motor, I am thinking of adding a 1500w 48v front wheel motor. Plus, derestrict the Bosch original motor (I already ordered speedbox 3.0)

The sockets on my Haibike Trekking 3.0 with Bosch performance line CX motor look different - there are two smaller sockets with plugs in and one larger one. Question is which of the smaller sockets does the Speedbox plug in to?

This is a fantastic idea and completely legal. It just means you have a way of switching to unlocked mode when you are not on a public road/path.

@dzengerink

Жыл бұрын

Not everywhere, not in France! up to 30.000 euros fine.. be careful lads, check your laws

@krokodilen31

Жыл бұрын

​@@dzengerinkdo u have an example on a actual case someone got that penalty?

@ambiorixcastillocina2730

9 ай бұрын

Does it give me more power for hills?

Just installed the 3.0 on a 2020 CX with purion display , just awesome what a speed, no need to remove the pedal on my bike on installation. Flat out with MTB tires I reached 52km/h on a flat road. Safely shutting down the bike just takes 5-8 seconds. Totally happy! UPDATE: Drove 500km no problems. Shutting down time is longer than 5-8 seconds. More like 30-40 seconds. I notice it gets shorter when i put the setting back to max 25kmh mode for the last 300 meters of the ride. That saves 50%. Again have to say its a great ride i average 40-45 kmh can easily keep up with speedpedelecs :)

@tvaccount6211

4 жыл бұрын

How are you getting on with it now? Any error come up? have you done over 1000km yet? Interested to hear your experience

@sanderfrigolagroen5871

4 жыл бұрын

@@tvaccount6211 Check my initial comment. I made an update.

@simplyaasian7176

2 жыл бұрын

how do you avoid the 504 error thing

@hurvinekspejbl6229

Жыл бұрын

@@sanderfrigolagroen5871 how u doing?

고맙습니다.

Thnx for you quick response. Got the chip out, received the upgraded, put the chip back in. Tested it, got a new bike. Specially in ECO you can feel a much better response and longer range. Very pleased with the upgrade and the Speedbox.

@SpeedBoxTuning

3 жыл бұрын

Thanks for your positive feedback. It is appreciated.

@mohsinsheikh1961

2 жыл бұрын

@@SpeedBoxTuning Nice video I have cube touring hybrid one 500 ebike, since it is a paddle assist and due to my health requirements I would like to add throttle to my cube ebike, please advise / guide on how to go about having throttle control installed in it. Thank you

Stealth tuning that can be switched Love 💓 it

@SpeedBoxTuning

3 жыл бұрын

We appreciate your positive feedback. Thank you.

Can you do this without the crank puller? My Speedbox 3 just arrived (Amazon) but now I'm seeing the installation video and it uses the puller. Now I'm finding that Speedbox actually sells it on their website but now I would have to wait awhile for it to arrive.

so frustrating....not showing how you packed the wiring into the case. That was the whole reason I was watching.

@kennethkarso

4 жыл бұрын

Dont tell me you cant use tie ribs to pack it up men.. or did you have two left hands

@jeffellermeyer4517

4 жыл бұрын

Perhaps this mod is not for you?

@jameswilson9011

3 жыл бұрын

they show it dangling free inside at 3:32

@capelde

3 жыл бұрын

Use your imagination ffs

@Shaijn815

3 жыл бұрын

i'd suggest a little 3m vhb tape or cable ties

Installed mine 2017 scott ,bosch cx ,in minutes ,works fabulous

@rossturley7341

3 жыл бұрын

1000k,s now since i installed speedbox ,great really is an easy install, tiny cable tie for the wiring and tuck the box away ,literally done in minutes

I dont have this brand I have a Philodo H8 which alone I have 9 PAS modes, but usually use hand throttle and can hit 38 mph when freshly charged, then it drops to like 31-34 mph range when riding a little. I just want to know if theres any tune kits for that type of bike, all the computer parts are located in a bag by the battery, and a box on the bottom frame by the front tire. I just want my bike to take of quicker sometimes lol cause it has times where it peels out, or times where you have to pedal to help the motor realize I want to go lol

I have a Speedbox 2.0 that I just bought and installed although it is not going as fast as i had hoped from the Videos that i saw. My Bike is a little bit faster (It goes 25mph now and did do 20 to start). I installed my Speedbox 2.0 on my 2019 HaiBike XDuro AllMTN 2.0 with the PW-X Motor. I really need this bike to go faster. Is there any way to make my bike faster with new Speedbox 2.0 (programming or something)? And i thought watched something saying that the different power modes during the pedal assist use were adjustable with the Speedbox 2.0? Like the Torque and regen and so on. Is this true? I want to turn the Torque up to maximum, as well as speed and Regen. Is this possible?

Great video! I have a 2015 Haibike Xduro Hardseven with the Bosch Performance Line motor on it. Will this chip work with the older Bosch system? Cheers.

@SpeedBoxTuning

2 жыл бұрын

Hello Jim, yes of course. SpeedBox 2.0 for Bosch is fully compatible with your eBike.

It works.. But I can only set it to 25 kmh and 99 kmh. I can't set any other speeds. I'd like to set it to 32kmh.. I'm following the steps in the video, but i can't set the speed correctly.

I just ordered this system on Amazon. This better work.

@iamIncrediblehulk

2 жыл бұрын

Well, did it work?

@Wilhuff_T

Жыл бұрын

No. Allant 7 . Nothing .

Thanks for great video just got another gestapo bosch motor (Great Priced full carbon Canyon Grail On: Wished the had used wonderful Yamaha motors....) so bought another great speedbox. Correct me if I am wrong, respectfully why did you have to pull the crank arm to remove the cover ? I did the same procedure 2 years ago on that model motor and easily removed the cover by removing those two torx screws without pulling the crank. As everyone can see by this video you can easily get to them by turning the crank arm out of the way.

@SpeedBoxTuning

Жыл бұрын

Hello. We are glad that you are satisfied with the SpeedBox, even if it is not for a Yamaha motor 🙂 It is true that it is not always necessary to remove the crank from the motor. We made a video of the handle being removed to demonstrate this option as well. Plus the video is clearer and the motor cover did not obstruct the shot.

@geu6270

Жыл бұрын

@@SpeedBoxTuning Great !!! Just ordered a Speedbox 3.

@mikecarroll9000

6 ай бұрын

Can you help me please

Hey, is the speed limit setting permanent or do you have to set it every time you toggle the speedbox on? If you don't activate the speedbox on your ride do you need to wait before turning the bike off? How long do you have to wait before turning the bike off and does the wait time depend on the length of the ride or the kilometers you have put on the bike?

@SpeedBoxTuning

Жыл бұрын

Hello Vesa. Sorry for late reply. Speed limit setting is permanent until next change in settings. You do not need to wait for the countdown, if you do not activate the tuning. Yes, the countdown process depends on the length and speed of the ride - usualy takes a minute or two.

How about an updated video for 2021?

Wanna do this with my Tern GSD S10. Has anyone tried it?

Поставив спід бокс 3 огонь )

I installed Speedbox 3 B. without removing the pedal. Active Line Plus

How do I fit this into a haibike atm 5 2021. I have both but can't see to get to the wires in the motor to insert speedbox

What size crank puller do you use for a haibike?

Hello SpeedBox, this looks great and think it will work well with my Trek. Just one thing I didn't quite get. When SpeedBox is deactivated, does the motor revert back to Bosh original settings until activated again on the walk button. ie Can you flick between Bosh and SpeedBox?!

@SpeedBoxTuning

3 жыл бұрын

When SpeedBox is deactivated, bike acts like there is no SpeedBox installed = default speed limit. You can turn the SpeedBox on/off whenever during the ride.

@mohsinsheikh1961

2 жыл бұрын

@@SpeedBoxTuning Nice video! I have cube touring hybrid one 500 ebike, since it is a paddle assist and due to my health requirements I would like to add throttle to my cube ebike, please advise / guide on how to go about having throttle control installed in it. Thank you

Do you have bike models where a tuning device doesn't fit inside? I have a Carver Strict E.410 bike and the place inside that powerunit is razor thin! I don't see a device fitting there inside at all.

so how about some longer-term review on this, anyone got bricked for good by now?

@threadzz

3 жыл бұрын

I've had a Speedbox on my Bosch motor from almost new. Currently done more than 12000kms and it still feels just like new. :-)

@wesleylimbrick1073

2 жыл бұрын

Had my speed box 2 for 2 years do approx 200 miles a week off road commuting and still going strong ,brill bit of kit

just installed seedbox2 nice 👌

My (Canadian purchased) 2022 SCOTT Strike eRIDE 920 has the BOSCH Performance Line CX GEN-4 , which has 5 plugs all with wires going into them .Only 1 of the ports don't have a wire plugged into it. Is there some other product or adapter that I'd require to make this work?

@SpeedBox Tuning what you do if you stop at stoplight and countdown start? Can you pedal forward? I live in city, I stop at stop light many time , and another one and another one.. What happen if I pedal before countdown is over? What happens if you ran out of battery life?

@SpeedBoxTuning

2 жыл бұрын

We counted with situations when customer must stop on traffic lights. In this case you are allowed to interrupt the countdown. Basically, countdown might be interrupted occasionally. However, it must not be completely ignorred. Just at the end of your ride, please let it count down to the 0.

Cool :)

Great video! I already got mine installed on my activeline plus last year. Although having watched your video I didn't realise there was a speed setting available. I have the Bosch Purion display same as the video but the activeline plus motor. Does this have the speed setting as cannot get it to flick between speeds apart from Turbo etc. Cannot get it to say 0.3, 0.35, 0.4 etc..

@SpeedBoxTuning

3 жыл бұрын

Second half of the video is dedicated to speed limit setting. I'll be happy to help you figure it out, please just contact me on info@speedbox-tuning.com.

@evo______

3 жыл бұрын

@@SpeedBoxTuning Thanks for getting back. Just figured out what it is lol! I have the Speedbox 2

I think I have a question that could help all people having performance cx 2020. Will the 2021 85 newton update will be compatible with the speedbox 3? Or will there be a mandatory update on the speedbox 3?

@Raceeverything

3 жыл бұрын

2nd this .. hope it still works with the update ?

@artgreg2296

3 жыл бұрын

I went to one of my bike dealer he told me he does not make the 85newton upgrade because that would break the unrestriction kit... but did not know kit of which brand

Por favor active subtítulos en español, el vídeo lo entenderán millones de personas más y tendrá más visitas. Gracias! Buen vídeo!

As mentioned in the posts below, the hardest part of this install is keeping all the wires in place as you install the motor cover. I suspect this procedure wasn't shown in the video because it is very hard to do.

@DickOswald

3 жыл бұрын

@Matthew Mullins where are u stated in can?

@McStoolio

3 жыл бұрын

Please, just tape them.

@mikepotts319

2 жыл бұрын

Again, coming from someone who's done this. It's easy. Really easy. There is plenty of room. Great bit of kit.

@johnieallen6115

2 жыл бұрын

On which bike? Please.

@milanmodos2610

2 жыл бұрын

@@johnieallen6115 It doesn't matter wich bike he did this to, because it's the Bosch motor what we are talking about and not the whole bike.

If I have Shimano Steps E6100 series motor with 36V 250W 50Nm + 36 V Comfort Li-Ion battery 625Wh (17.4Ah) 40-65Nm what will be the highest max speed ? Thanks

@Edward-nz4ck

3 жыл бұрын

Whoah! You have Good battery i have E6100 its so fun with speedbox but max 50 km/h

Hi. Have the 3.0 speedbox on a Bosch performance. I just realized that I only can enable the tuning via the app. The walk button or the +-+- no longer enable the tuning. Any tips?

Hi man. Do you know if it will work with the new trek rail 9.8 2021? Because the display .. I mean the visor is diferent. Could you help with this question please? Thanks so much

@SpeedBoxTuning

3 жыл бұрын

Hello, yes we confirm compatibility with all the Trek bikes. SpeedBox 3.0 for Bosch is compatible with all the displays - Intuvia, Nyon, Purion, Kiox and Cobi.

Does this work with 2022 CX performance models?

Got the news there is a software update for the Bosch 4th gen, with some pretty great new stuff. Can we use the old chip or do we need a to buy a new chip (Which I don't mind, because I like the fun of it!)

@SpeedBoxTuning

3 жыл бұрын

SpeedBox 3.0 for Bosch is fully compatible with new 2021 Bosch update. This update is related to Gen4 only so you must have SpeedBox 3.0 for Bosch to be able to enjoy the new udpate.

@Raceeverything

3 жыл бұрын

SpeedBox Tuning can we leave the speed box plugged in whilst getting the update ?

@ericsens4355

3 жыл бұрын

@@Raceeverything If you leave the chip in, it will be found by the Bosch software during the upgrade and void your guarantee.

@scottjacobs7522

2 жыл бұрын

So if you take out speedbox when you get a service done is the bike shop able to tell if have had speedbox on there ?

@Simon-ls8xf

7 ай бұрын

Today I got 504 error after 8000 km 😮

Can this be used to calibrate a Bosch motor? I don't need to speed, just want to be able to ride 25 instead of being capped just under 23.

Can you tell me why you have to wait for countdown to finish before switching off after a ride? Thanks

@SpeedBoxTuning

4 жыл бұрын

This is our way how we deal with Bosch's tuning detection.

@brakesforsnakes757

4 жыл бұрын

@@SpeedBoxTuning What are the chances that this can be detected by a manufacturer even after being removed?

@WEF2030SLAVE

4 жыл бұрын

@@brakesforsnakes757 +1

@27Dionysis

3 жыл бұрын

SpeedBox Tuning what does “tuning detection” mean? Great product. What happens if you turn it off before the countdown ends?

Boa noite, excelente vídeo,

@SpeedBoxTuning

Жыл бұрын

Olá, obrigado 🙂

Can you show a Bosh Diagnostic Tool Report on the latest Software? I can't believe that there isn't any detection or error code

Does this support topstone neo carbon 4 for Japan spec?

Oh cool I think I’ll have to get one for my new 22 Trek Rail 9GX that’s coming in April. I assume you do for this.

@SpeedBoxTuning

2 жыл бұрын

Yes, soon, we'll start working on the new SpeedBox for 2022 Bosch Smart System.

I've got a COBI smartphone adapter (came with the Bike). Will it work with the smartphone display? If I get the installation wrong is there some sort of assistance from Speed box? I take it more control via the SpeedBox App

@SpeedBoxTuning

2 жыл бұрын

Yes, SpeedBox is fully compatible with COBI. You can reach us on many phone numbers that are situated on our website. You can reach us on Facebook, Instagram, email, etc.

hello it is ok for eride scott 930 for motor bosh cx generation 4 ? where i can buy it ?

@SpeedBoxTuning

3 жыл бұрын

Yes, we confirm compatibility. Link is situated in the video description.

Wait, so how fast does the Bike go when the SpeedBox is deactivated? nvm. its on the Website. Sets it back to 25km/h

Will the "Park Tool CWP-7" work to remove the crank arm on a trek rail?

Nice video and it's a nice bike too but since it is a paddle assist but due to my health I would like add throttle in my cube bike, please advise in detail on how to go about it ?

@SpeedBoxTuning

2 жыл бұрын

I regret to inform you that we are not producing these.

Hello, i wonder if my performance line samedi xroad line can break the limits with speedbox 3? thank you for your help!

@SpeedBoxTuning

Жыл бұрын

If your eBike is equipped with Bosch motor, then definitely yes.

Will this work with the new update just came out recently? And does it effect the EMTB mode that ensures even better control on the trail since the new update?

@artgreg2296

3 жыл бұрын

+1

@SpeedBoxTuning

3 жыл бұрын

Yes, it is compatible with new update that increases torque. It does not affect any of riding modes. EMTB mode still will be EMTB mode.

@yabonney

3 жыл бұрын

@@SpeedBoxTuning That's great to know i will be buying. Appreciated

@artgreg2296

3 жыл бұрын

The user James MacFarlane says it does not work. I wait for his explanation

@yabonney

3 жыл бұрын

@@artgreg2296 I've just bought mine but not opened the box. However, I've had mixed reviews. Some people say it work's with the latest update I believe that you need to make sure that when updating the latest bosch software that you remove the speedbox and always make sure you let it run-down the clock before switching off and before connecting your charger. It should work that what I've been told. I'll wait for the someone from the speedbox box team to answer us. But checking their the Facebook page they inform us that it works with the current version!

Gen4 cx with latest software done, has this affected the usability of speedbox 3, are all the functions and options still available and is it detectable for warrenty work

@SpeedBoxTuning

3 жыл бұрын

Hi Alan, updating is recommended. SpeedBox has no negative effect. Warranty won't be voided because SpeedBox is untraceable.

Are there bike shops that can instal this for you, as I don't have the tools to do it? I have a gen4 15.5mph, but I will be moving to USA later this year where 20mph is the limit.

@SpeedBoxTuning

3 жыл бұрын

There is many of them. Depends, where are you from. Only special tool is crank puller though.

Hello, I have a cube reaction pro 2020 bike with performance line cx motor and it has the unit software 1.0.2.0, is it compatible with this version? Has anyone had problems with this software? Thank you.

@stevepots

4 жыл бұрын

@SpeedBox Tuning can you reply to this message as very interested in getting one of your chips

@SpeedBoxTuning

3 жыл бұрын

We confirm compatibility with this software version. Feel free to download it.

@kw971

3 жыл бұрын

@@SpeedBoxTuning how can I check my unit software version please?

Will it work with the bosch 4 Gen "cargo" motor? Before software update or after update will be good to install? Thank you

@SpeedBoxTuning

2 жыл бұрын

Hello Paul, we recommend to update your system and then install the SpeedBox. SpeedBox 3.0 for Bosch is fully compatible with your eBike.

I need to add photo one wire is loose on my will a bike mechanic do this properly for me obviously not bocsh

I have a Gen4 2020 motor on my E-bike, does anyone has experience with the Bosch Display Intuvia?

Took the bike to get it serviced. It came back and now speedbox has made it have 503 errors. Is this the latest firmware change?

I have a performanceline cx gen 3, and i have a speedbox 3.0 with BT. I have a EMTB but not the EMTB program installed? Normaly the emtb is on e mtb in stead of the SPORT program. when i do the update does the speedbox still work?

@SpeedBoxTuning

Жыл бұрын

Yes, SpeedBox is fully compatible with this update. Feel free to download it.

Is it worth to place it? I have bosch active line motor (36v-250w motor, 25km/h). My display is intuvia lcd display.

@ingush1989

3 жыл бұрын

@william gillan installed it already almost a year, works fine ;)

The count down doesn't work on my gen 4 3.0 should I be concerned about errors?

Nice, How long does it take to go down to 0 before turning Off on a 750 smart model ?

@SpeedBoxTuning

Жыл бұрын

Hello. It depends how long have you been riding. Let´s say one and half minute.

cant you just go into manufacturer setting and change the settings.also does this work on wheel motors or is it just crank motors also did you leave your part hooked up and try to find room inside or do you remove it once you put codes in then put back together and once its done does it effect battery i would imagine it drains battery faster thank you

@SpeedBoxTuning

2 жыл бұрын

Speed can not be unlocked anywhere in the settings. SpeedBox is compatible with mid drives only. Ebike tuning drains battery a bit faster. However, it is just one of many factors that have impact on discharging of the battery.

Per my last post - What I mean is - when I turn on using top button do I then each time have to go to the walk button to select 6.1 or whatever the Speedbox is set to please - Or does it remember and pick up from the previous mode I. E either normal or speedbox?

@SpeedBoxTuning

9 ай бұрын

Hi. After switching the e-bike off and on, it is necessary to activate the tuning again. The display shows a value of 9.9 kmh or 6.2 mph. But if you set a maximum speed of, for example, 30 mph, it will stay in memory and you won't have to set it again every time 🙂

Does it work with Kiox display?

@SpeedBoxTuning

4 жыл бұрын

Yes, all the SpeedBoxes for Bosch are compatible with Kiox display and all the other displays too (Intuvia, Nyon, Purion, Cobi).

Will this work on the performance line 2017 motor.....not CX

@SpeedBoxTuning

3 жыл бұрын

For 2017 Bosch bikes, you can use any of our SpeedBoxes for Bosch. All of them are compatible.

Does the speedbox works with the kiox controller? If yes, can you share instructions?

@rayl2354

3 жыл бұрын

Did you get a response I would like to know the same thing as I have a kiox

@robertomariscal

2 жыл бұрын

same here need to know

Hi, if the Speedbox 3.0 is removed from the bike before any warranty claim, will they be able to detect that it was plugged in, and then invalidate the warranty?

@jeromeawake3283

Жыл бұрын

Yes ones the "computer" of the bike is conntected to the dealer/sellers laptop etc for service etc. History of the bike will show that in its "lifespan" it has provided more KW's at higher speed which leads to the proof the engine has been messed with.

do you have to remove the battery during installation?

@SpeedBoxTuning

2 жыл бұрын

It's recommended but not necessary.

Do you make a Speedbox 3.0 for the Yamaha PW-X Motors?

@SpeedBoxTuning

3 жыл бұрын

Yes we do. SpeedBox 2.0 for Yamaha is fully compatible with PW-X motors.

I read on the Bosch website that the motors can detect that it's going faster than it should and goes into a low run mode that can only be reset by a Bosch technician with a code. Is that true?

@SpeedBoxTuning

3 жыл бұрын

Basically, it's true. However, there are ways how to overcome that. SpeedBox 3.0 for Bosch is the way. It's fully compatible with the newest Bosch motors.

@xmateinc

8 ай бұрын

@@SpeedBoxTuning so you're basically admitting to tricking the bosch software, then telling people this won't void the warranty. Very nice.

wich diameter in mm for torx scrwdriver plz ?

Will the Speedbox-3 work for Bosch Cargo line? About to order a cargo bike but need that extra assist. Thank you.

@SpeedBoxTuning

Жыл бұрын

Hello, yes of course. SpeedBox 3.0 for Bosch is fully compatible with Bosch Cargo line.

I wonder what this tunning does to your motor in the long run.. Yes, it drains the battery much, much quicker, that's obvious. Can the bosh gen 3 handle that sort of extra 'stress' 'assistance' ?

@SpeedBoxTuning

Жыл бұрын

We've been producing SpeedBox products for Bosch motors for seven years now. I mean there is many customers who use our products for seven years. Battery is not being drained so much quicker. Depends on your speed and plenty of other things such as riding mode, terrain, your weight, etc.

Hi! If I use the speedbox during a ride then turn off the tuning but continue riding on normal power (speedbox off) do I still need to wait and do the countdown process?

@SpeedBoxTuning

Жыл бұрын

Hi, Sam. If you don't drive many kilometers with the tuning on, the countdown process can be quite fast. It will probably happen faster than the e-bike turns itself off.

What’s happens when I unplug the speedbox 3.0? Is it just a normal e bike and is everything working still the same for example the walk button? And do I really need the latest update on the Bosch software to run the speedbox 3.0?

@niblet112

2 жыл бұрын

Yeah it’s the same if you turn the speed box off. The bike will go back to default.

Why Speedbox 3.0 for bosch is nor working in my Trek Powerfly 5? Help me please

@royhoek1590

4 жыл бұрын

Santeri do you have a fourth gen moter ?

@TheCallOfDutyFreak

4 жыл бұрын

@@royhoek1590 works with 4th gen right?

@TheCallOfDutyFreak

3 жыл бұрын

@Federico P. i know

Will the speed box work on a Bosch performance line ?

@SpeedBoxTuning

3 жыл бұрын

Yes, it is fully compatible with Performance line motor.

Will this Speedbox 3.0 work for Bosch Center Motor Performance line CX Gen 4?

@SebGruch

3 жыл бұрын

He says this pretty much on the beginning of the movie.

@artgreg2296

3 жыл бұрын

@@SebGruch actually it is more complicated than that because if you do the 85 newton upgrade and so will be the 2021 models by default it seems it will not mork anymore as someone commented here

Will this work with my Hitachi massager?

@francisiceberg907

3 жыл бұрын

Only the children's model.

I‘ve read that the Bosch software detect the modification and deactivates the motor completely after some minutes of usage. To unlock it you have to visit the bike dealer. Is that true?

@cocojombo7975

2 жыл бұрын

Good question i want to modify my bosch motor as well. I think i have to wait a little till i got more details about this

@borislorenz9585

2 жыл бұрын

Can only speak for a 2019 Bosch Performance Line CX. Works fine with mine. Can't tell about the Gen4.

@SpeedBoxTuning

2 жыл бұрын

SpeedBox 3.0 for Bosch overcomes this. We stay behind our products. Furthermore, if Bosch accidentaly detects tuning, motor is still usable, just the motor support is decreased for a while. To resolve this, you don't have to visit the bike dealer. Visit the bike dealer is just one of the options.

@SevenCuriosities

2 жыл бұрын

yes bosch software will detect it, but only after few hundreds km.., probably something in the statistics of usage doesn't sum up and it will trigger a tunning detection, happened to me on cx perfomance Gen4, was all good the first rides but after ~300km it started to show random speeds while riding, then error 504, limp mode, and had to take the speedbox 3 out, will not use it again

@pinopino1086

2 жыл бұрын

@@SevenCuriosities ....pffffff. Horrible. I would like to go a few miles faster but not with all the hassle you had. So what now?

when is the speedbox 4 out ? the version 3 is putting a lot of Bosh Gen 4 and older Gens with the firmware updates into Limp mode after so many miles. WHEN WILL THIS BE FIXED ? and why are the speedbox makers all quiet about this like its not happening..

@frankiecain6976

3 жыл бұрын

My speed box goes to 2.1 instead of 6.5 for some reason now and it cuts out at 22 mph do you know why it’s a 4th gen

@artgreg2296

3 жыл бұрын

Same here, i have started to buy a 2021 cube cx to my dealer but will finally ask for a refund till there is a real tested working product

bonjour.sur un moteur bosch performance line cx MY15 BDU2xxCX "generation2" sorti en 2015,quelle speedbox faut-il que j'achete....merci pour la reponse

@SpeedBoxTuning

9 ай бұрын

Bonne journée. Nous recommandons la SpeedBox 3.0 pour Bosch. Il est compatible avec les générations 2, 3 et 4 🙂

Beautiful instructions on how to destroy the motor and battery

@SpeedBoxTuning

Ай бұрын

Dobrý den. Instalace tuningu je neinvazivní, pouze se napojí na stávající konektory. Není důvod, aby tuning ničil motor nebo baterii.

For “limit”, what if your bike does not have EMTB mode. Can you still do this?

@SpeedBoxTuning

Жыл бұрын

Hello Stir. Sorry for late reply. Yes, you can set the speed limit without EMTB mode.

And what speed box for Bosch CX 4 Gen 85nm. ?

Hi there, I’m having problems with the 3.0 speed box. Bike won’t start after installing the device. Help

@artgreg2296

3 жыл бұрын

Thats a big one

@SpeedBoxTuning

3 жыл бұрын

Hello, please just contact us on info@speedbox-tuning.com. There might be jut loosen contact between your display and SpeedBox (for example).