What’s up guys! Hope you liked the video. In the description I have the links to most of my mods. Check it out!!

@bornjamerican52

3 жыл бұрын

Blessings primo! Man I saw a car like yours here in bklyn NY I was like sis he’s here holy crap lol. Everything looks like your car from the rims to the side skirt and license plate was from Florida too. Then I saw the front of the car and I said forget it, it’s not him 😂😂😂😂😂😂

@HorsepowerLabs

3 жыл бұрын

@@bornjamerican52 😂 you made my day bro.

@bornjamerican52

3 жыл бұрын

@@HorsepowerLabs well I’m a class clown 🤡😂😂😂😂😂😂😂😂😂

@HorsepowerLabs

3 жыл бұрын

@@bornjamerican52 nah bro I’m glad I have a friend up there

@thomaskosko1

Жыл бұрын

Just got me a 7th gen, man, just started watching this series and appreciate it man. Waiting for my black mesh grilles.

I’ve been looking for videos on how to install it and they just show the before and after. I finally found the video on how to install it and very detailed. Thanks

@HorsepowerLabs

3 ай бұрын

Glad I could help

You were doing everything right except your only mistake was not taping it rear to middle to front. What you did was rear to front to middle. That’s what caused the dip.

alright my summer project was to custom mod my dodge avenger... so far i've installed a front bumper lip, a diffuser, a rear wing and now will be installing a side skirts. It looks dope so far without the skirts on yet, bet it's gonna look even better with the side skirts.

Bout to do this on my 06 Altima. Have a good front lip and figured these would look good and eventually hold led underglows. Give it a touch of nostalgia. Lol. Sick ride too btw bro.

@HorsepowerLabs

3 жыл бұрын

Thanks bro I appreciate it. Make sure you measure correctly and use the metal things that come with it to hold it straight

@leocortez4658

Жыл бұрын

Hey, I have an 06 atlética and wanted to do this too. Which one did you buy and did it look good?

Side skirts is 🔥🔥🔥🔥🔥 on point

thanks for the video brooo

First person I've seen to get them to sit mostly straight, everyone else had them sagging and looking horrible. I got these to install on mine when the weather gets nicer

@HorsepowerLabs

2 жыл бұрын

They say a little after time tho

Just subbed, keep up the content bro you consistency will get you to the top 💯

@HorsepowerLabs

3 жыл бұрын

Thanks bro appreciate it. Get ready for next video it’s 🔥

What kind of take did u use?

Dang fam i'm just now seeing this smh so on my joint I took off all the factory body pieces, modified the mudd flap thingy and I got the solo version of the side skirt. STILLEN makes a complete kit for our models however this way is affordable and it's custom ✌😁

Are you able to put the side skirts on the car if it already has some on? Or do you have to take off the ones it comes with

@HorsepowerLabs

2 жыл бұрын

You can keep the small ones on the car

Damn the blue esr wheels🤌🔥🔥

@HorsepowerLabs

3 жыл бұрын

Thank you. I like en too lol

I have that and I put self tapping screws the whole way down

@HorsepowerLabs

3 жыл бұрын

That is not going anywhere 😆

Hey did you pre drill the side skirts and used the screws it came with or did you get self tapper screws

@HorsepowerLabs

Ай бұрын

Pre drill the skirts first but I made sure I measure correctly where to place it

I bought the exact same ones but I cant drill the screws into my car side skirts or rocker panel whatever u call it. Its a 2014 accord Lx plz help someone

@HorsepowerLabs

2 жыл бұрын

Why can’t you drill into it?

If you take off those mud flaps it should sit straighter 🤔 And look up burnt copper for the brake calipers. Something metallic would look good with those wheels

@HorsepowerLabs

3 жыл бұрын

Ima look into that. Thank you

I like it

@HorsepowerLabs

3 жыл бұрын

Thank you. It’s super glossy too

Neon green calibers

I like the car bro! I have 2014 Nissan Maxima as well and I have it fully straight piped and on some good wheels I live in the Orlando area let’s see when we can meet up and do some pulls‼️

@HorsepowerLabs

3 жыл бұрын

I’m down bro 😎 hit me up @realgmaxine_

So I got side skirts and lip on eBay where do I screw the screws into?

@HorsepowerLabs

3 жыл бұрын

Onto the body of the car. Front bumper for the lip and under side for skirts

@anthonysanders6640

2 жыл бұрын

@@HorsepowerLabs Does it screw into the pre existing screw holes from the factory skirt? Did you have to drill through the metal of the car? I haven't been under yet to see what I'm looking at. Lol Mines going on a GTI

@HorsepowerLabs

2 жыл бұрын

@@anthonysanders6640 if you have pre drilled holes that would be great. Mine I had to put screws

How hot is it there? Just ordered some and now im scared that they will bend in the sun😅 I live in Finland so its 30°c at max in the summer

@HorsepowerLabs

2 жыл бұрын

It can get around 95 degrees here. Mine are saging

How would I go about doing this for a 1.2 Renault Clio? As they pretty much don’t have a skirt for this to attach to?.

@HorsepowerLabs

3 жыл бұрын

So this is universal, meaning it can fit any car. You can cut and trim to make it fit

@looksbroken3785

3 жыл бұрын

@@HorsepowerLabs Yes I know what you mean it’s just I don’t have anything for it to connect it as my car has no side skirts as it’s a mk2 1.2litre.

@HorsepowerLabs

3 жыл бұрын

@@looksbroken3785 can you try to drill onto the side piece?

@looksbroken3785

3 жыл бұрын

@@HorsepowerLabs there are holes where a splitter could be fitted maybe I can try to use them.

@looksbroken3785

3 жыл бұрын

Skirt*

I bought the same front lip for my Audi A8 D4 and it came with red strip in the middle and I screwed it and drove on the highway and booom I heard some Weird noise and bam 💥 I saw it flew In pieces thru rear mirror lolll..

@HorsepowerLabs

3 жыл бұрын

That’s my fear everything flying off.

That looks like the same ones that I have.

@HorsepowerLabs

3 жыл бұрын

Might be

So u have to drill into your car?

@HorsepowerLabs

2 жыл бұрын

Yes I drilled into the bottom side skirt to be safe

Yellow brake calipers😈

@HorsepowerLabs

3 жыл бұрын

Might look 👀 🔥

i'm bolting mine with screws on all angles.... aint no way im relying on some damn tape lol

Blue to match the calipers I think 🤔

@HorsepowerLabs

3 жыл бұрын

Something that pops though

1.Holographic brake calipers, 2. or yellow, 3. maybe orange.

@HorsepowerLabs

Жыл бұрын

Ima look into first one

What size skirt was it bro

@HorsepowerLabs

2 жыл бұрын

I believe 78.7 inches

@jaybreezey6945

2 жыл бұрын

Thanx. I was looking at both 78.8 & 86.

@HorsepowerLabs

2 жыл бұрын

@@jaybreezey6945 you can always cut if anything

no - it looks different in places because your car curves in by the doors --- why were you so afraid to put more screws in?

I use screws and 30lb double sided gorilla glue tape

Red paint

Brake cal same color luggage nuts

Salt collector 😂

that looks really cheap material

to "low". You guys always make this very same mistake.

@HorsepowerLabs

2 жыл бұрын

Lol yeah

Bad installation try to run 120km / hr and i bet this side skirt will fly away from other car’s windshield

@HorsepowerLabs

2 жыл бұрын

I’ve run 200km/ hr no problem. They held up so far.