Much more Colorado content to come, guys! Someone just got sponsored by Rough Country! 😁🤫

@johnmascia7612

3 жыл бұрын

I cannot wait, we need more content!

Thanks for showing me cleaning engine bay

@HorsePowerObsessed

4 ай бұрын

You’re very welcome!

Thanks for this video this helps me and understand how to clean my Colorado engine bay 👍

@HorsePowerObsessed

Ай бұрын

You’re very welcome!

Good day Justin; always enjoy maintenance & detailing videos, as detailing is a passion for me; take care, and have a wonderful week.

@HorsePowerObsessed

4 жыл бұрын

Thanks, you too!

Literally doing the same to the Colorado today and your video came up after I finished

@HorsePowerObsessed

3 жыл бұрын

lol nice!

Right on Justin, looking great. I tell the wife, I use soft pressure only.🤙

@HorsePowerObsessed

4 жыл бұрын

🤣🤣🤣 Thanks, man!

+1 for the Bosch Icons

@HorsePowerObsessed

4 жыл бұрын

Always have had good luck with these blades.

Dawn power wash works great on mats

I do the exact same procedure. After my rinse, I take it for a 20-30 minute drive on the hwy to dry it off.

How has the leveling kit held up and which one are you still using? Did it void your warranty any? What's the biggest tire size you can get on it? Thanks, I'm sitting at 82,000 miles and am trying to decide which way I want to go to get bigger tires?

@HorsePowerObsessed

3 жыл бұрын

The leveling kit is great. No problems to report. It is the rough country 2" level you can find here: amzn.to/3q8SoMf. I would you could go to a 275 series tire without issue. I am on a 265/65/17 but that's because I also have 1.5" wheel spacers pushing everything out. Without the wheel spacers I'd be able to fit a taller/wider tire.

Hey Justin, for someone without that washer setup do you recommend any engine bay cleaner for use. I have a 1500 Silverado that is getting pretty dirty in the engine bay. Thanks!

@HorsePowerObsessed

4 жыл бұрын

You can really just use a garden hose. Get it wet and soapy and wipe it down with a rag.

Hey! Got a few questions sorry! If I’m cleaning the engine bay and don’t have the cover anymore due to an cold air intake. Would I have to cover it? Also would a KN intake void my warranty??

@HorsePowerObsessed

3 жыл бұрын

You shouldn't have to cover anything just don't spray directly into anything and keep it as far away from electronics as possible. These things are designed to get wet to an extent.

I would invest in some Rain-X. I don't even use my wipers anymore and I live in high hurricane traffic area.

@HorsePowerObsessed

3 жыл бұрын

I like ceramic coating. If I drive over 30mph with the XPEL ceramic on the windshield I don't even have to think about turning on the wipers.

After you pressure wash the engine bay, it makes it easier to see the "Do Not Pressure Wash" emblem on top of the electrical cover by the battery.🤣

@HorsePowerObsessed

Жыл бұрын

I never pressure washed anything. I specifically left the “pressure” part of that statement off 🤣

Yeah my terminal cover is cracked. Hasn’t broken off yet. Cracked it while changing oil filter. I have the same floor mats and fluid film the shit outta my undercarriage for the winter. I’m in NJ.

@HorsePowerObsessed

3 жыл бұрын

Yeah it's a pretty common issue, easy fix, though.

Are there any filters to change out on the No Spots Pro deionized water tank?

@HorsePowerObsessed

3 жыл бұрын

No filters. It's just DI resin that needs changed after a while.

I think you need to upgrade the pressure washer's hand-held nozzle to TWIN-TURBO'S! If one is good, two has got to be great!😉 I'll prove it to you. Come to my house, I have a Water Wheel Dyno setup! Oh yeah, bring your yellow rubber suit, you might get just a little wet during testing. Now, hold the phone, stop the music, just wait a minute! I have to comment on your washing attire. Don't you get cold feet? 🤔😊 Kind of strange where GM get their parts. That cover is from Hungary. Lastly, after you sprayed the engine and related covers down with water, I loved the "wet look." I'd be tempted to paint them shiny black. Unless, do you or Blackout Tinting know of a detail product that would make the plastic shiny, I mean really shiny. I enjoyed the upload Justin. Save the Wave🙋🏼‍♂️

@HorsePowerObsessed

4 жыл бұрын

Thanks, Peter! I did get "wet" feet doing this lol. I could coat them with some engine dressing but I don't like how it attracts dirt.

I didn't see links to items in your pressure washing system. I am curious, since it looks like a great setup.

@HorsePowerObsessed

4 жыл бұрын

Sorry I knew I forgot something! I added them to the description but I'll send them here too. AR Blue Clean 630 pressure washer: amzn.to/2Xct7Ux MTM SGS28 gun and foam cannon: amzn.to/2Toyqiw MTM Hydro 100ft hose: amzn.to/3d4poio MTM Stainless quick connects: amzn.to/2LJr1WL Cox Reels 100ft hose reel: amzn.to/2YZqR5o MTM 2ft jumper hose: amzn.to/3cxubsE No Spots Pro spotless wash tank: amzn.to/3e4SDlc

I would try it but my luck sooner or later there would be a problem I don't need any issues.

Just FYI. I got my replacement wipers at my local Chevy dealer for $15 each. Just Incase neat time you want OEM GM parts . I was hoping they did just the replacements for the rubber inserts like Honda but the GM blades are just as good as any aftermarket ones in my opinion .

@HorsePowerObsessed

4 жыл бұрын

I got the Bosch wipers for around the same price after a coupon. It was easier to just do it that way for me.

@garyford516

3 жыл бұрын

Those OEM wiper blades are great, I got a 2017 Colorado and I still have the original wipers on it.

@HorsePowerObsessed

3 жыл бұрын

I liked the oem wipers too but apparently they were streaking.

@garyford516

3 жыл бұрын

@@HorsePowerObsessed yeah these ones are starting too streak so it's time to replace them. These are great trucks all around, no problems and very reliable. I'm hoping to get some stuff done to mine very soon.

Turbo nozzle . . . I've obliterated wood siding on a house (accidentally) with that thing. Gotta be careful! lol

@HorsePowerObsessed

4 жыл бұрын

Absolutely! With any of this stuff you have to be careful but when used properly, it's amazing!

What’s that cold intake you have?

@HorsePowerObsessed

Жыл бұрын

Cold air inductions. I’ve done 2 other videos on the install you can check out on the channel.

What detergent did you use

@HorsePowerObsessed

Жыл бұрын

Just this soap: amzn.to/3xOnlLL

Didn't think you could power wash a colorados engine mine has a x tru the power washer Sign thanks for the info still not comfortable doing it I guess it can get wet just not high pressure

@HorsePowerObsessed

Жыл бұрын

Yeah I didn’t have it on high pressure. It gets wet just from regular daily driving just don’t put pressurized water in that area, especially between the seals, and you’re good.

1. How does air get into that air box? 2. Can you come do my vinyl siding?

@HorsePowerObsessed

4 жыл бұрын

Lolololol. This unit is for personal use but air is pulled from the passenger side fender for this intake.

I think that engine needs some XPEL!

@HorsePowerObsessed

4 жыл бұрын

Agreed!!

Beautiful truck. But is it as reliable as Ram😁

@rafgood2452

4 жыл бұрын

Hello from Ukraine)

@HorsePowerObsessed

4 жыл бұрын

I've had no issues in my 2 years of ownership!

@HorsePowerObsessed

4 жыл бұрын

Hi there!

@rafgood2452

4 жыл бұрын

@@HorsePowerObsessed beautiful

@michaelm398

4 жыл бұрын

A ram deemed reliable.... There's news!! Lol

I clicked on the link for the positive battery cover and it pops up on amazon for $30. That’s a little more then $10.

@HorsePowerObsessed

3 жыл бұрын

It was 10 but this video was also recorded over a year ago so prices do change on Amazon unfortunately

Considering how fastidious you are with your vehicles, the garage floor could use the same

@HorsePowerObsessed

4 жыл бұрын

Absolutely agree! I'm kicking around some options. It's coming!

@michaelthomas8617

4 жыл бұрын

@@HorsePowerObsessed thanks for responding. I had a contractor grind my concrete floor to remove stains and roughen the surface. Then applied a neutralizing cleaner. Applied paint as directed and let "cure" for a week. Hot Corvette tires still pulled up small patches.

@HorsePowerObsessed

4 жыл бұрын

That's why I'm iffy on epoxy. I'm leaning more towards race deck.

@michaelthomas8617

4 жыл бұрын

HorsePower Obsessed not familiar with that product. Hope whatever you choose works for you. I ended up putting tarps over the paint job. Also no longer have corvette 😢😢😢😭😭

What's up with going into stores with no mask?