Awesome risers and video !! I would recommend anyone using wood risers, to sand the surface of the boards to make them smooth before you paint them. Also, once it’s thoroughly dry, lightly sand between each coat of acrylic sealant to make the surface buttery smooth.

@PopCultureLivingRoom

10 ай бұрын

Thank you! And thanks for the great tips!

👏🏼👏🏼👏🏼

@PopCultureLivingRoom

10 ай бұрын

Thank you Louis!

I was gonna 3D print my risers for the lighter figurines and such, but man, this is really nice. I definitely wanna do this for anything heavier.

@PopCultureLivingRoom

10 ай бұрын

Thank you so much for watching!

Yeah!! Killer work man!! 🙌😎

@PopCultureLivingRoom

10 ай бұрын

Thank you so much!

Awesome! Will be doing this, thanks Costa!

@PopCultureLivingRoom

10 ай бұрын

Thank you for the continued support!

Another super useful tutorial, thanks Costa! 🙏

@PopCultureLivingRoom

10 ай бұрын

Thank you so much Helen!

Thank you Costa, amazing work 👏👏👏

@PopCultureLivingRoom

7 ай бұрын

Thank you!

Definitely going to try and do this

@PopCultureLivingRoom

10 ай бұрын

Awesome! Thanks for watching! If you have any questions when making the riser, please feel free to reach out to me.

Thanks man and I giggled a few times lol

@PopCultureLivingRoom

9 ай бұрын

Thanks Joe!

@JodaMoore

9 ай бұрын

@@PopCultureLivingRoom you’re welcome 👍🏻

Great project! I’ll try this out, much faster than shelves from Moducase!

@PopCultureLivingRoom

10 ай бұрын

Thank you so much! Definitely much faster and possibly cheaper than Moducase.

sorry english is not my first language, what does it mean "you need to thread one side"? is it to shave off 38mm of it? a direct translation tells me it means to insert...

@PopCultureLivingRoom

4 ай бұрын

A screw has threads. I have attached a picture: essentracomponents.bynder.com/transform/66df3c0e-1f14-43be-965b-f7b89996b5c0/EssLH-RH-Fastener_1460x500px-A For a screw to be able to be screwed into the aluminum, ridges need to be made inside the aluminum so the screw will screw into it. Inside the the hole of this nut is what threading is: i5.walmartimages.com/seo/10pcs-M4-Thread-Hammer-Head-T-slot-Nut-20-Series-Aluminum-Profile-Drop-in-T-Nuts_8b671be3-150d-4fd3-a94a-15638baad03f.dbf7b8988bec8f275856bd9211defd16.jpeg?odnHeight=768&odnWidth=768&odnBg=FFFFFF I hope it makes sense. I will add the explanation to my live stream this weekend. Thank you again for watching!!!!

I decided to make the riser. So I bought the extrusions from the American buyer but I just got an email from them saying that the smallest cuts they could do is 100mm?

@PopCultureLivingRoom

3 ай бұрын

Man, I'm sorry. I haven't ordered anything under 100mm from Open Builds so I haven't run into that issue. I was about to order aluminum from them for my new The Platform display to see the difference in cost with Ooznest. I just checked the FAQ and It's on there. I added that info to the description of each riser video. Even with the higher shipping, I mostly get my aluminum from Ooznest because of how easy it is to use their website. I know the smallest cut they do is 40mm. Thanks for the info. And again, I apologize.

@daltoncason6948

3 ай бұрын

@@PopCultureLivingRoom but in the video you said you got them cut at 38mm and treaded by them?

@daltoncason6948

3 ай бұрын

Where did you place the washers between the bolt head and the board or between the board and extrusion?

@PopCultureLivingRoom

3 ай бұрын

@@daltoncason6948 Hi Dalton. The washer goes between the bolt head and the board. So you slide the washer on the bolt and then slide the bolt into the hole in the board . Hope that helps!

Hey man where can i contact you from some advise on my muscle rack build. I dm you on IG

@PopCultureLivingRoom

7 ай бұрын

I accepted your message request on IG. Send me any questions there. Thanks so much for watching!