I got through step by step how I fixed the hard starting on my dad's 2007 Yamaha Rhino 660.
Жүктеу.....
Пікірлер: 43
@Wh3nth3wick3drul311 ай бұрын
My brother took his five times to a mechanic in Blanding UT and it was a piece of crap. My 13 year old nephew tells his dad he wants to be a mechanic. So my brother says he can try with the side by side. He watched you, fixed the side by side and they had a day of fun with the side by side actually working!
@thehonestmechanic
11 ай бұрын
I'm happy I was able to help(sort of lol) these comments make me very happy and it's why I make videos! 🙏
@dustyschiewe5522
Күн бұрын
Blue tooth
@michaelrussell92939 ай бұрын
Best, easiest, affordable, effective solution of my year. Thanks for sharing.
@paulanderson388 Жыл бұрын
Great idea...Thank You. I try to remember to start it once a week to keep the float bowl full. I have a 2007 Rhino 450 (Love it) and I found that using an Iridium spark plug also helps it fire up quickly.
@danemmerich67752 ай бұрын
OMG….. yes this is exactly what I need!! Mine has had issues all the time and now it will not start because no gas to Carb. I will try this first and then try the electric fuel pump if it does not work. Thank you so much!!!
@billwolsleger4162 Жыл бұрын
Great idea, wish I had seen this easy fix before installing my electric fuel pump system and switches. Thanks.
@InTheDirtAgain Жыл бұрын
Those primer bulbs have a 1-way valve in them to act as an anti-drain feature. Swapped an old (original) bulb for new on my 69 Merc 1000 outboard and its a night/day difference in starting. Great idea on any older vacuum pump engines.
@nomadchad8243Ай бұрын
Thats a great idea, mine runs great but after a month I need to use spray start to get the fuel to the carb. I tried an electric pump and it started great but It would often overcome the float needle and flood the carb making it a fire hazard.
@20_below23 күн бұрын
i just hold my hand over the air intake on my 2005, works every time
@kellypendleton6819 Жыл бұрын
I only wish you had cleaned off the engine so we could see everything. Thanks for the tip. I just ordered the inline primer bulb.
@roberttheriault51666 ай бұрын
Super good video,
@Surfcityrealty Жыл бұрын
Lots of people also change out the fuel pumps to key on electric pumps.. I like your idea too..
@thehonestmechanic
Жыл бұрын
I wanted to keep it simple and reliable. An electric lift pump is possibly better....
@oby-1607
Жыл бұрын
@@thehonestmechanic I really doubt the electric lift pump is better because if an accident occurs and the rhino is upside down or on its side and the fuel line gets a leak, the pump will continue to pump fuel as long as it has power and can make a situation way worse than it can be. Probably why the factory uses a vacuum pump.
@kendavis81385 ай бұрын
Thanks, I'll try this.
@TexasGuitarTech8 ай бұрын
Thank you! 🙏
@tractorguy19674 ай бұрын
Hey bud , great video. I too have this problem but will follow your suggestions. I recently replaced the battery and now I have all the lights but it will not turn over. Could there be a fuse gone bad?
@thehonestmechanic
4 ай бұрын
So just starting from the top, I'm assuming that the battery is food and that it's installed properly. After that, there is a breaker for the starting circuit. It's usually located in the battery box . I would check it first. Also, thank you for watching!
@davewise2915 күн бұрын
Can you get to that squeeze ball without taking to the drivers seat? Great video
@thehonestmechanic
15 күн бұрын
Yes but it's much easier to remove the passenger seat
@alexchic507411 ай бұрын
I bought one of these for my church, the church is a 40 minute drive from my house, so I'm sorry to pesker you with a question but it'll save me a good hours drive. Did you have to buy fuel lines for this mod? If so what's the ID?
@thehonestmechanic
11 ай бұрын
I did have to buy some fuel line and adapters. I used whatever size the current fuel system was which if memory serves it's 3/16 and adapted it to the smallest primer bulb I could find which I think was 1/4. Unless of course you can find a primer bulb that is the correct size and simply splice it in. 😉
@alexchic5074
11 ай бұрын
@@thehonestmechanic that was my original thought process, splicing it in. I've bought 4 different sizes just in case. But as a precautionary, I'll spend a little more for fuel lines too. Thank you for the quick reply and info. Much appreciated, and I've subscribed.
@edgarguzman2071 Жыл бұрын
Where can you get part . Link.,? part #.?
@thehonestmechanic
Жыл бұрын
I purchased this one from my local boat/marine store. Here is a link from Amazon www.amazon.ca/Rubber-Transfer-Vacuum-Gasoline-Accessories/dp/B06X3R9YBN/ref=mp_s_a_1_3?crid=3IKHL4BGU097K&keywords=primer+bulb+boat&qid=1682217766&sprefix=primer+b%2Caps%2C308&sr=8-3
@keithnichols1951 Жыл бұрын
Will this work on a 2009 rhino that is fuel injected?
@thehonestmechanic
Жыл бұрын
This modification is intended for carburated models. Fuel injection already has a higher pressure fuel pump
@johnbauer2565Ай бұрын
Where did you get your primmer ball?
@thehonestmechanic
Ай бұрын
I picked up my from my local boat dealer. I thick I added a link in the description box for one on Amazon
@kendavis81385 ай бұрын
Did you use 1/4" or 5/16" hose?
@thehonestmechanic
5 ай бұрын
Pretty sure the primer bulb was 5/16 and the regular fuel line was 1/4. I ended up using a reducer to make everything work together
@robertoalvarez86272 ай бұрын
👏👏👍
@WyldeTymes70 Жыл бұрын
Do you bypass the fuel pump all together or are you still going into it ? Thanks
@thehonestmechanic
Жыл бұрын
Still using the fuel pump.
@keagonhuff2493
Жыл бұрын
@@thehonestmechanichat is the size of the hose for the pump
@keagonhuff2493
Жыл бұрын
@@thehonestmechanicwhat
@thehonestmechanic
Жыл бұрын
@keagonhuff2493 I can't remember exactly but I think it is 1/2 inch
@davewise29
10 ай бұрын
Great idea mine is hard to start after sitting How can you get the primer if the passenger seat is in place??
@richardthomas1743 Жыл бұрын
I bought an electric fuel pump for mine , I just have not installed it yet.
@charlietaylor4020Ай бұрын
This is mine it Will run the battery down
@justinperry2392 Жыл бұрын
Or just get a fuel pump, we got rid of the vacuum pump.
Пікірлер: 43
My brother took his five times to a mechanic in Blanding UT and it was a piece of crap. My 13 year old nephew tells his dad he wants to be a mechanic. So my brother says he can try with the side by side. He watched you, fixed the side by side and they had a day of fun with the side by side actually working!
@thehonestmechanic
11 ай бұрын
I'm happy I was able to help(sort of lol) these comments make me very happy and it's why I make videos! 🙏
@dustyschiewe5522
Күн бұрын
Blue tooth
Best, easiest, affordable, effective solution of my year. Thanks for sharing.
Great idea...Thank You. I try to remember to start it once a week to keep the float bowl full. I have a 2007 Rhino 450 (Love it) and I found that using an Iridium spark plug also helps it fire up quickly.
OMG….. yes this is exactly what I need!! Mine has had issues all the time and now it will not start because no gas to Carb. I will try this first and then try the electric fuel pump if it does not work. Thank you so much!!!
Great idea, wish I had seen this easy fix before installing my electric fuel pump system and switches. Thanks.
Those primer bulbs have a 1-way valve in them to act as an anti-drain feature. Swapped an old (original) bulb for new on my 69 Merc 1000 outboard and its a night/day difference in starting. Great idea on any older vacuum pump engines.
Thats a great idea, mine runs great but after a month I need to use spray start to get the fuel to the carb. I tried an electric pump and it started great but It would often overcome the float needle and flood the carb making it a fire hazard.
i just hold my hand over the air intake on my 2005, works every time
I only wish you had cleaned off the engine so we could see everything. Thanks for the tip. I just ordered the inline primer bulb.
Super good video,
Lots of people also change out the fuel pumps to key on electric pumps.. I like your idea too..
@thehonestmechanic
Жыл бұрын
I wanted to keep it simple and reliable. An electric lift pump is possibly better....
@oby-1607
Жыл бұрын
@@thehonestmechanic I really doubt the electric lift pump is better because if an accident occurs and the rhino is upside down or on its side and the fuel line gets a leak, the pump will continue to pump fuel as long as it has power and can make a situation way worse than it can be. Probably why the factory uses a vacuum pump.
Thanks, I'll try this.
Thank you! 🙏
Hey bud , great video. I too have this problem but will follow your suggestions. I recently replaced the battery and now I have all the lights but it will not turn over. Could there be a fuse gone bad?
@thehonestmechanic
4 ай бұрын
So just starting from the top, I'm assuming that the battery is food and that it's installed properly. After that, there is a breaker for the starting circuit. It's usually located in the battery box . I would check it first. Also, thank you for watching!
Can you get to that squeeze ball without taking to the drivers seat? Great video
@thehonestmechanic
15 күн бұрын
Yes but it's much easier to remove the passenger seat
I bought one of these for my church, the church is a 40 minute drive from my house, so I'm sorry to pesker you with a question but it'll save me a good hours drive. Did you have to buy fuel lines for this mod? If so what's the ID?
@thehonestmechanic
11 ай бұрын
I did have to buy some fuel line and adapters. I used whatever size the current fuel system was which if memory serves it's 3/16 and adapted it to the smallest primer bulb I could find which I think was 1/4. Unless of course you can find a primer bulb that is the correct size and simply splice it in. 😉
@alexchic5074
11 ай бұрын
@@thehonestmechanic that was my original thought process, splicing it in. I've bought 4 different sizes just in case. But as a precautionary, I'll spend a little more for fuel lines too. Thank you for the quick reply and info. Much appreciated, and I've subscribed.
Where can you get part . Link.,? part #.?
@thehonestmechanic
Жыл бұрын
I purchased this one from my local boat/marine store. Here is a link from Amazon www.amazon.ca/Rubber-Transfer-Vacuum-Gasoline-Accessories/dp/B06X3R9YBN/ref=mp_s_a_1_3?crid=3IKHL4BGU097K&keywords=primer+bulb+boat&qid=1682217766&sprefix=primer+b%2Caps%2C308&sr=8-3
Will this work on a 2009 rhino that is fuel injected?
@thehonestmechanic
Жыл бұрын
This modification is intended for carburated models. Fuel injection already has a higher pressure fuel pump
Where did you get your primmer ball?
@thehonestmechanic
Ай бұрын
I picked up my from my local boat dealer. I thick I added a link in the description box for one on Amazon
Did you use 1/4" or 5/16" hose?
@thehonestmechanic
5 ай бұрын
Pretty sure the primer bulb was 5/16 and the regular fuel line was 1/4. I ended up using a reducer to make everything work together
👏👏👍
Do you bypass the fuel pump all together or are you still going into it ? Thanks
@thehonestmechanic
Жыл бұрын
Still using the fuel pump.
@keagonhuff2493
Жыл бұрын
@@thehonestmechanichat is the size of the hose for the pump
@keagonhuff2493
Жыл бұрын
@@thehonestmechanicwhat
@thehonestmechanic
Жыл бұрын
@keagonhuff2493 I can't remember exactly but I think it is 1/2 inch
@davewise29
10 ай бұрын
Great idea mine is hard to start after sitting How can you get the primer if the passenger seat is in place??
I bought an electric fuel pump for mine , I just have not installed it yet.
This is mine it Will run the battery down
Or just get a fuel pump, we got rid of the vacuum pump.