☁️Easy IPSEC Site-To-Site VPN Guide, MikroTik ROSv7☁️
Hello friends, in this video we will be discussing what IPSEC is, why it is such a useful protocol and how we can go about configuring a Site-to-Site VPN using IPSEC with IKEv2 on a MikroTik device. The setup will be done in a live lab on two MikroTiks via Winbox and CLI as well as tests will be done to verify that both networks can successfully communicate with eachother.
❗Help the channel grow by subscribing if you aren't subscribed already! A like is also very appreciated and feel free to leave a comment about what you liked or disliked in the video and what else you would like to see from me :) 👊❗
Timestamps:
📕00:00 - Introduction
📕00:50 - What is IPSEC
📕05:00 - IPSEC Security Architecture
📕06:20 - Common IPSEC Networks
📕08:00 - Lab Topology
📕09:05 - IPSEC Setup Winbox
📕17:11 - IPSEC Setup CLI
📕21:38 - Verifying Tunnel is working
📕22:21 - NAT Accept Rules
📕26:00 - Test from Site A
📕27:00 - Test from Site B
Support the Channel:
⭐Become a Patreon: / thenetworkberg
⭐Become a KZread Member: / @thenetworkberg
Social Media:
🌏 / thenetworkberg
🌏 / bergnetwork
🌏 / the-network-berg-39451...
MTCRE Playlist:
• Free MTCRE RoSv6
MTCNA Playlist:
• Free MTCNA RoSv6
Thanks again for watching
Пікірлер: 155
"Just some Random guy covering Mikrotik Configurations ....." Top 2% of Informational Videos on YT. You're not just covering but also explaining everything man GG.
Thanks for all great lessons :) You can add subscription $5 or $10, because now jumps from $1.99 to 20$ and nothing between. Cheers and keep up the excellent work!
This is by far the best ipsec guide for Mikrotik on KZread! I have had Mikrotik for years and never got the ipsec settings and firewall rules quite right. I learned alot! Thank you!
6 months ago . I was very confueed being a new bee back then. But today i revisted . And i noticed you did a very beautifule job to this . Now i understood everything clearly . Check within ,you will see my previous comment when i eas a newbee . Thanks .
You officially are my IT professor! Amazing video , amazing content. Thank you that you are doing it for free.
Thank you Very much for your video about IPSEC!
Sweet man! Thank you so much for this video!!!! You rock dude !
Thankyou very much! I've never used Mikrotik before and have a site to site IPSEC project coming up. You made this very simple to understand! Thanks again
This helped me out so much for understanding everything. With a little more research I was able to make a script with variables and couple more options for lots of remote sites.
Thank You! Easy to understand!
Thank you! Worked first try!
Extremely good!!! Thank you!
Top stuff. Thank you TNB for upload!
Just perfect. Exact what you need for site-to-site tunnel, no bull$hits. Just exlcellent! Thank you bro!
@TheNetworkBerg
Жыл бұрын
You're welcome!
Awesome..!! great content as always.!
@TheNetworkBerg
2 жыл бұрын
Appreciate that, thank you :D!
Great explanation, thank you so much 🙏🏼
IKEv2/IPSec server guide would be really good! :)
Great video, thank you
Great Tutorial
Amazing video, easy to understand, your ipsec guide is perfect. Thanks so much.
@TheNetworkBerg
4 ай бұрын
Appreciate the nice feedback
AWESOME! Thanks
Awsome video, Thanks
@TheNetworkBerg
2 жыл бұрын
Glad you liked it!
Very nice video
Thanks for such a nice and informative video, I am new to microtik but watching your videos taught me a lot thanks again
@TheNetworkBerg
2 жыл бұрын
Great to hear!
nice man , welldone.
You are Amazing. Your video is helped me. Than you so much
at the CLI for the peer @17:11 .he knew he was going to f..ked us up . and said dont worry guys ,it really not going to be that bad . and it went bad for newbies. 😂😂😂😂...nice job though my mentor 👍👍👍👍
Thank you for your series, they are amazing. I would love to see a similar IPSEC S2S tutorial with dynamic DNS endpoints on both sides.
@TheNetworkBerg
Жыл бұрын
Thanks for the idea! Will see what we can play around with using some scripting
@constantin286
Жыл бұрын
@@TheNetworkBerg Weird, looks like my earlier comment was deleted - did I post something inappropriate? I previously (and with a lot of pain) set up a IPSEC S2S with DDNS on edgerouter and I don't recommend that to anyone who values their hair or time. A lot of undocumented stuff that has to be found and implemented. However, I would love to see a DDNS VPN setup in IPSEC, Wireguard, or VPN of your choice to link two home networks together, using Mikrotik routers as the primary gateway in both sites. Think vacation home, road warrior with a dynamic home IP, etc. Thank you!
@TheNetworkBerg
Жыл бұрын
@@constantin286 the only comment I have seen from you is the one that I replied to. KZread does sometimes tend to mark comments as inappropriate the moment you use stuff like hostnames or IP addresses. Probably as a means of combating spam/phishing attacks.
Hey there, here's some of the reference material. Feel free to use it with the video to either get a better understanding of IPSEC or the different types of setups you can use this for :) As some people pointed out in the comments, you can view the IPSEC secret by exporting the configuration with the show-sensitive command. I have had never had to extract a key from a MikroTik so was not aware of it either. Thanks guys! What is IPSEC: www.cloudflare.com/learning/network-layer/what-is-ipsec/ MikroTik IPSEC Wiki: help.mikrotik.com/docs/display/ROS/IPsec Wiki Docs: en.wikipedia.org/wiki/IPsec#:~:text=In%20computing%2C%20Internet%20Protocol%20Security,virtual%20private%20networks%20(VPNs). en.wikipedia.org/wiki/Internet_Security_Association_and_Key_Management_Protocol en.wikipedia.org/wiki/Diffie%E2%80%93Hellman_key_exchange
@jeytis72
2 жыл бұрын
In which cases is worth using IPSEC over Wireguard...and the other way round? Thanks
@mikkio5371
Жыл бұрын
@jeytis72 I think wiregauard has a preferred throughput. Over ipsec .he did a video on different vpn. But both are very secure .
Hy. Your explanations are nice to hear, easy to understand. Made my day.
@TheNetworkBerg
Жыл бұрын
I am happy if my video has made things a bit easier for you. Thanks for letting me know :)!
¡Gracias!
Great video... *subscribed ... ;)
Thank you, your language accent are very clear, GG
good hack, good job man
good job
subscribed
Muchas gracias funciona perfectamente.
@TheNetworkBerg
Жыл бұрын
Awesome 😎!
Thanks
tks. save my life man!
@TheNetworkBerg
Жыл бұрын
Happy to help
very best, your a nice profesor
@TheNetworkBerg
Жыл бұрын
Thank you! 😃
Connection established, firewall rules up but no ping between routers! Only when I add new route on MK ping start
thanks for videos. do we need to do any port forwarding in modem
I Agree with Chris Wick it is the best ipsec guide I’have seen. Unfortuneatly it only shows when all goes well. In my case I got an error no proposal chosen in the log file. I checked and double checked and are problably overlooking someting. Some feed back on possible thinks that can go wrong would be appriciated. Thanks Michael
@TheNetworkBerg
Жыл бұрын
Just remember IPSEC is VERY sensitive and it takes TWO TO TANGO, even if all your configuration is correct on your side if the other end does not match correctly then the tunnel will also not come up. Your error does sound more like an issue with how the proposals were configured. I would suggest reviewing the proposals or posting your config with sensitive information hashed out on the MT forums or Reddit for further help.
@MiDiCur
Жыл бұрын
@@TheNetworkBerg The tunnel is up . I can not access any hosts on either side of the tunnel. All ping’s to either the local address of each router or any host times out. I went over your execelent video 4 time made screen prints from the configurations of both routers. Compaired all the settings for correctness. Can’t find anyting on the web that would clearify or solve the the ping/ connection issue. I could send you a dropbox link with the configurtion of both routers.
@Bidon47
6 ай бұрын
@@MiDiCur did you found any solution?
Hello TheNetworkBerg, thanks for your amazing videos. I have a question related to this configuration, is it safe enough to setup something like this on production?
Hello, did you ever tried to make two IPSEC connection between the Mikrotik devices for redundancy. I searched about this allot but didn't got the correct response as I wanted to make the setup between the Site A and Site B, my IPSEC tunnel is working fine but on the Site A there are two Mikrotik routers for redundancy, according to the requirement when one router goes down from Site A I need to achieve the connectivity via failover between two IPSEC tunnel. It will be great if you suggest something.
Thanks for all these great MT videos. Can we do a site-to-site between to hAP ax3 over ZeroTier? That could be a nice new video! 🙂
Hello, this really help me a lot! Thank you! But i have a problem or question, why I can't map a network drive? even though i can ping the NAS device?
hi ur videos are great help to us .thank you for ur sharing and time . i have a small question in my ipsec address to other destination B i don't have a static ip i can use cloud ddns in mikrotik as address ? thank u
Great explanation This will be my favorite channel This is what I was looking for You are a beloved teacher Is it possible that the destination address is a virtual server (VPS) Is it possible to have the router ROS in a virtual server(vps) and the destination address in another virtual server(vps) ?
Hi There, you forgot the show the part of inputting the default routes pointing to each site, good video, thanks
Any chance of doing a vid of multiple nat ipsec tunnels ? i.e. multiple offices connecting to a central office where each mikrotik sits behind a standard isp broadband router
Great tutorial. I got the site to site VPN running by following your guide. However, I dont understand why is it recomended to use NAT instead of FW rule to accept the traffic from other site? Instead of NAT i made a basic input FW rule and it does the same thing as much as I understand. There isnt a need for network address translation, or maybe I'm missing something?
Hey, Network Berg, can you make tutorial on road warrior setup for IPSec as well. Just like you did with WireGuard. Thanks
Hi, great videos. I created an IPSEC tunel via two HAP AC2 based on your video, everything works (ping, Win shares...), except Winbox over VPN tunnel. ROS 7.6 Any ideas? :) Thanks.
Nice demonstration one question is in my mind, is there we need to add any firewall rule in mikrotik top get ipsec goal ??? or in my case if A side is mikrotik and B side is Fortinet then???
Excellent guide, thank you! Question: Can 2 devices that are on the same LAN (same IP) connect on the same L2TP/IPsec vpn server at the same time?
Hello, it's not working if connecting to GCLOUD infrastucture, since the router is showing my wan address (172.x.x.x) instead of public address . My inet connection comes from another firewall, but it's natted 1:1 (wan address inet address). How can i tell the mikrotik to use the pubblic address instead of wan address?
Excellent explanation Master, thanks for the valuable tips, I applied it on an OCI server and managed to work correctly, but I have a problem, I have a vpn on RB1, when connecting via OpenVPN client I can't communicate with the Lan IP on the other side of the tunnel , I put VPN dhcp in policies sending it to my remote network, but I have no communication, do you have any idea how I could solve this?
Hello. Can I use ddns at the cloud section as the destination address?
If I add an input accept rule, UDP protocol, all ports to FW Filter Rules, and under this rule I add an input drop rule, then pinging from network A to network B does not work. Do I then need to add a rule allowing pinging...?
Dear i have a problem on one router i have configured vlans and ipsec tunnel not passing the traffic to vlans how to achive that can you please help me out?
Hi! At first very big thanks for the guide! Anyway... I made all like you, but my ping don't go throug... I checked my NAT rule and everything looks fine. Any idea?
Maybe I missed it, but is it possible to do this when only one side has a public IP address? For example, I want tunnel between my network and my parents, without them having to pay (and expose their network) for a public IP
hi sir. does this work lets say my VPN Server has Static WAN . but the 20 branches has dynamic WAN ip addresses?
In ipsec peer section do we need static ip addresses?? Like you entered 172....
I switched to wireguard but it's always nice to see your videos. Thx for the content. BTW, It is possible to export the secret with /ip ipsec/identity/export show-sensitive. Unfortunately we can't export system users' password this way.
@TheNetworkBerg
2 жыл бұрын
Yeah wireguard is also a favorite of mine for MT to MT :D, though IPSEC is still pretty handy when connecting to another vendor, especially to firewalls like a FortiGate or Palo Alto. Thanks for the tip about show-sensitive, didn't even consider doing that while making the video.
@kresimirpecar4925
2 жыл бұрын
Excellent video as always, you never let us down :D I don't know how is in other countries, but i have big trouble getting mikrotik devices... Switches, APs...
@TheNetworkBerg
2 жыл бұрын
@@kresimirpecar4925 I think the chip shortages affects all vendors. Some networking gears are on backorder for months+. These are pretty crazy times we are living in.
@kresimirpecar4925
2 жыл бұрын
@@TheNetworkBerg Yeah... Bad times indeed... On one site i have mikrotik router, ubiquiti switch and tp link AP... (Temporary setup, as eta on mikrotik gear is unknown...)
Something changes in ROS 7.7, my configs dont work after an update, looks all fine, but no data transfer.
Hey Berg, works good for me thanks, just wondering if i add 5 sites, all need to connect back to my main site and maybe still see each other, do i just add profiles on the main RB for each of them, and just add main site to them all once?
@TheNetworkBerg
Жыл бұрын
It should just be a case of updating the P2 proposals and IPSEC policies to get that done via a "Hub" this is typically referred to as a hub and spoke topology. So in theory yes you can have all remote sites communicate via the main site with some tweaking to your IPSEC
Hello The Network Berg, thanks for your amazing tutorials. I have a questions though, i have the same configuration like yours but the thing is that I have multiple IPSec tunnels HQ, site-a, site-b, site-c, i defined each site separately to HQ but i cannot ping site-a from b or c. Is there any suggestion you may give me? Thank you very much.
@TheNetworkBerg
Жыл бұрын
Most likely your issue is your IPSEC policies and what traffic gets encrypted. To run the setup as a hub and spoke you will have to update the IPSEC policies to encrypt all traffic between all site subnets per tunnel. Alternative would be to create a meshed setup where you run tunnels between the branches and just set encryption there.
I tried tunnel between ROS 6 and ROS 7 and not working for me. Connection between routers is established (sha256 with aes256) but no TX and RX flow. I guess the problem is incompatibility between 6 and 7 version. Anyone with similar problem here?
Just followed every step, connection established but cant ping gateways or any host both ways. Anyone with a clue what would be wrong? ROS 7.7
the problem, from lan under mikrotik 2 , i can ping to lan under mikrotik 1, but from lan mikrotik 1 i can't ping to lan from mikrotik 2.
i had to add a firewall filter rule to make phase 2 establish: accept, input, Protocol 17 udp, destination port 4500. idk why.
Which site is the host and which is the client , technically? And could you do a video where it is a Site-to-client?
Ping and speed test don't work between routers!!! What firewall rule enables Microtik router ping and speed test after this setup?
I don't get it why you don't create any IPIP tunnel first or GRE etc? Is it necessary?
Support Mikrotik route based ipsec tunnel?
Thank you so much for this video. Question: My tunnel says it's established, I added the Firewall rule you suggested. But I can't ping the other end LAN without adding a static route. That's not right is it?
@robertoa26
Жыл бұрын
I am using ether6 for my tunnel. I'm not using ether1 the WAN port. I guess that's what's messing me up?
Great video! Could be this be done if one of the routers don't have an ip reachable from the another router? Let's say Mikrotik A have a public IP on the wan interface and Mikrotik B just have a private IP on the wan interface.
@TheNetworkBerg
2 жыл бұрын
Yes it can be done in this manner as long as NAT-T is running you should be able to create a type of "dialup" VPN.
@douglashammes995
Жыл бұрын
@@TheNetworkBerg WONDERFUL, this was also a question of mine. Can you explain better, how to make this configuration without the reachable ip on both sides?
do we need static public ip for this lab?
Good video! Thanks - Question: what's the best way to turn off this created IPSEC tunnel, if you don't want it running all the time? Like an on/off switch.
@TheNetworkBerg
2 жыл бұрын
You could just go to the "Peer" tab and disable a peer that you do not want active, to re-activate it you simply need to enable the peer again. "On/Off Switch" ;)
@wyoung1179
2 жыл бұрын
@@TheNetworkBerg OK - Thanks
Hi Man Thank you for the video. We did the same configuration on two of Mikrotik routers, step by step mentioned in this video. The tunnel is established but traffic is not being passed through the tunnel. The PC connected to each router can also not able to ping the other PC, connected with the 2nd router. And nor ping the LAN interface on other side routers. Please help me if I am missing something. Some configurations need to be done on the interfaces or in the routes before this IPsec configuration. Regards
@TatuMihai
Жыл бұрын
i faced the same issue!
@dubanfelipemorenoayala6440
5 ай бұрын
Hi, I also have the same problem, did you manage to solve it?
The only thing I dislike about MikroTik IPSec tunnels, is that they don’t create a interface in which to easily create static or dynamic routes over. Currently have to use L2TP/IPsec tunnels or GRE/IPsec tunnels.
@TheNetworkBerg
2 жыл бұрын
Yeah that is definitely a drawback, and another reason why so many people are prefering something like Wireguard on Mikrotik. It is strange because other vendors do tend to add a tunnel interface. It also makes understanding how traffic routes a bit more difficult since traffic being encrypted over the IPSEC tunnel does not show up in the routing table.
How can I use DDns to configure the remote site public adresse? Did you have some exemple? Tank you. Great vidéo!
@martinmcnamee4362
2 жыл бұрын
Great question.... I know there must be a way to use a name...
How do I build a virtual lab like yours. please do a video tutorial
can i use internet from site "b" ?
why didn't you specify the local address(is it supposed to write local wan IP) in the new IPsec peer section?
Hi good work, I have followed these steps on a newly reset mikrotiks, But I am not able to ping the other side of the tunnel. The tunnel is established but no data through. Are there other firewall rules to be added?
@Bidon47
6 ай бұрын
Did You found a solution for that?
Do we need static public address for peers on both sides?? Router is establishing peer with it self not with that of other router I'm confused 😭
@wettmarley
Жыл бұрын
public ip is needed to establish site to site. dynamic ips always hv issues with NATTING
Hello from Bulgaria, very good video, thanks Network Berg. I have a question, is it possible for a mobile device to connect to one of these two devices A or B and the condition is to freely reach the local networks of both devices A and B?
@TheNetworkBerg
2 жыл бұрын
Yes, although I think I might have a better solution with Wireguard. Video on that will be live later today :)
@Codename_47
2 жыл бұрын
@@TheNetworkBerg I look forward to the video ! There is no adequate video on this topic in KZread. I managed to connect my android phone with router A on IKEv2, but unfortunately I can't tell him to reach the hosts connected to router B. With wireguard I achieve the same result, I see only the hosts in router A. :( Thanks a lot for the quick response !
Thanks for this great explanation, I have established an IPsec tunnel to my AWS using v6.47.7 and it worked ok, but using v7.5 it didn't. is there any reason why?
@user-eb8ch2fr5b
Жыл бұрын
Me too. On v7.5 not work.
@dubanfelipemorenoayala6440
5 ай бұрын
Hi, I also have the same problem, did you manage to solve it?
IPsec site to site , can config site A public ip and site private ip ?
Hello! Is there a way to setup the VPN with only one peer having a static IP?
@TheNetworkBerg
Жыл бұрын
Yes, this can be done by using the NAT-Traversal option between peers. This will allow something like a NATTED connection to establish an IPSEC tunnel and based off of that session create the tunnel.
pls show how to setup mikrotik to edgerouter ipsec
Hello Sir, Does these settings work on two mikrotik routers in different geographical locations? Because mine have failed to connect
@TheNetworkBerg
Жыл бұрын
Yes these settings will work even in different geographies. Unless either ISP is blocking the tunneling protocol.
Hi as jy weer terug van verlog is kan jy asb help ek het tunnel configure en hy se established maar ek sien geen data flow nie
Can layer 2 vpn be performed using ipsec? if so can there be a part two to this video?
@TheNetworkBerg
2 жыл бұрын
IPSEC itself cannot do L2VPN, however, you could use another protocol inside of an IPSEC tunnel to do that like VxLAN, though be forewarned that the overhead may be a bit much.
can we use the same setting for road warrior vpn? if not can you make a video about setting mikrotik as road warrior ipsec vpn server?
@TheNetworkBerg
2 жыл бұрын
Sort of, though there are some tweaks so I definitely will create another video on a Road Warrior setups
i've added the NAT rules so the 2 netwroks connected by IPsec can communicate, even with this i get "no phase 2" unless i disable "drop all not coming from LAN" in the firewall, as far as i'm aware this is a big no-no but i cannot get IPsec to work without disabling this rule
@alexhawes6690
Жыл бұрын
I created a firewall rule to allow from my public IP but still stuck on no phase 2
@alexhawes6690
Жыл бұрын
For anyone with the same issue i fixed this by creating a firewall rule, accept input (src.address as remote lan) (dst. address as local lan) then i moved "drop all not coming from lan" to the bottom of the firewall list
please create a video for azure site to site