Testing Materials with xTool F1 Laser Machine (DIY Jewelry & Other Projects)
Тәжірибелік нұсқаулар және стиль
If you are interested in the xTool F1 used in this video, you can follow the links below:
🇺🇸 US Store: www.xtool.com/products/xtool-...
(discount code $80 off $999: xToolPartner)
🇪🇺EU Store: www.xtool.eu/products/xtool-f...
🇩🇪DE Store: de.xtool.com/products/xtool-f...
🇬🇧UK Store: uk.xtool.com/products/xtool-f...
‼️ATTENTION‼️
🌟 xTool has just released an upgraded version of the F1 called xTool F1 Ultra 🌟
which is a 20w diode + 20w fiber laser combo and it's even more powerful than the original F1:
🇺🇸 US Store: www.xtool.com/products/xtool-...
🇪🇺EU Store: www.xtool.eu/products/xtool-f...
🇩🇪DE Store: de.xtool.com/products/f1-ultr...
🇬🇧UK Store: uk.xtool.com/products/xtool-f...
***Please note the above links are affiliate and I earn a small commission whenever somebody decides to purchase through them. This is at no extra cost to you, but it helps me to make more content on my channel.
So thank you for your support if you do decide to use my links to purchase.***
😎 These are the protective glasses I got from Amazon:
www.amazon.co.uk/dp/B0892426Z...
🔹MY SHOP
helenadaydreamer.com
My Socials @helenadaydreamer
KZread
Tik Tok
Instagram
Pinterest
Watch more videos on laser cutting and engraving:
• Laser Cutting & Engraving
Пікірлер: 25
What else shall I cut or engrave with the xTool F1? 😃Btw there is a sale on xTool's website atm, links to this machine are in the description under this video🌟
Cool thank you!
Man, I want a playdate with your machine! looks like so much fun engraving things! :D
@HelenaDaydreamer
6 ай бұрын
Ou yea! I’m becoming addicted 😂
I just found your channel, so fun! Does this machine need to be in a well-ventilated area? can it be used inside a home? Also, what kind of maintenance does it require? thank you
@HelenaDaydreamer
5 ай бұрын
Hi Angie, I’m happy you’re enjoying my videos ❤️ I have the xtool smoke purifier with this machine and so I can comfortably use the F1 at home without any extra ventilation. Sometimes when I don’t use the purifier, I just put the hose/ tube directly from the F1 out of the window. And that does the trick too, but I prefer the purifier for sure. You can watch my previous video on the xtool F1 for more info. In regards to the maintenance, it really depends on what material you’re cutting/engraving, but from what I have seen, you will eventually need to clean the fan, possibly wipe the lense with isopropyl alcohol if it gets messy/ sticky. And of course change filters in the air purifier if you use it. I haven’t done any of these things yet, but eventually I will. Not sure if there is anything else, these were just my first thoughts. I hope you found this useful ❤️
Awesome, what s the think you used to place the ring? Plz
@HelenaDaydreamer
2 ай бұрын
Do you mean blue tack?
@asmaarfaoui1348
2 ай бұрын
@@HelenaDaydreamer yes , from where ?
Does this laser only engraves? Can it cut plastic etc for making jewelry etc? Thanx
@HelenaDaydreamer
5 ай бұрын
it cuts as well, wood, acrylic and so much more. There is another video on the xTool F1 on my chanel if you'd like to check it out.
@nikoliniolnc
5 ай бұрын
@@HelenaDaydreamer thank you very much 🌻🎩🇨🇾
Do you think we can engrave on an empty bullet brass casing? Wondering with the rounded edge if possible.
@HelenaDaydreamer
4 ай бұрын
I’d say yes, I’ve engraved brass without a problem and rounded objects too. Just depends on how long your text is or how large the image. Or you can go for the rotary and then you can engrave all the way round it.
@user-ox8xz7du8c
4 ай бұрын
@@HelenaDaydreamer thanks is your promo code also valid on Canada’s website?
@HelenaDaydreamer
4 ай бұрын
@@user-ox8xz7du8c I’m not sure, I think the code is only for US, but give it a go. If you go to xtool through any of my links in the description box, it should redirect you to Canadian xtool automatically. But they always run sales anyway even if the code doesn’t work for Canada 🇨🇦
Will the engraving always come out black on metal? I am looking for an etched look rather than a dark black look. Thank you
@HelenaDaydreamer
4 ай бұрын
This machine and all the diode lasers that can engrave metal using blue laser or infrared laser(depending on the type of metal you are using) will only mark the metal. You will be able to feel the marking with your finger nail, but it is not a traditional deep engraving you get using a Fiber laser or engraving by hand. The black colour is an oxidisation of the metal and you'll be able to rub it off or it will rub off eventually through wear(shower, swimming pool etc) Once it does, depending on how deep the marking is, the design will still show, but it will be not as deep as standard engraving if it makes sense. I'll try to make a video on this and show examples.
@303round
Ай бұрын
It’s not super crisp mmmm
Ed McMahon, Star Search, tagline.❤
@HelenaDaydreamer
6 ай бұрын
🙂❤️
what do you mean by my line per cent? if I want deeper engarve I need more line per cent? if I want to engarve my mom's handwriting in my jewellery how can I do that I have it in pdf
@HelenaDaydreamer
6 күн бұрын
Line per centimetre is a setting in xcs: ‘The amount of line the machine is burning back and forth in actual one centimetre of an area’ this machine can mark the metal and depending on your settings you can have just a light surface mark or deeper mark, but it doesn’t engrave very deeply. If you want deep engrave consider F1 Ultra, which is an upgrade to the F1. You can use different files in xTool creative space, not sure about pdfs, but there would be ways to go about that too. Like screen shot pdf to create jpg and then trace the image in xcs for example..
Positivity is contagious. Spread it! 🌈
@HelenaDaydreamer
6 ай бұрын
Let’s do that 🙌🏻😊☀️