Brother, that little trick of using a screwdriver that is thinner than the spring and the gromit just solved for me what has been a half-hour long headache. I cannot thank you enough.

@DiyRick66

4 жыл бұрын

Sometimes it's the little things in life right? 😉

@monicamalone6445

2 жыл бұрын

Genius!

@nickyjackflash

2 жыл бұрын

I’ve previously used an old pencil for the same thing and that works great as well.

The absolute best video ever… Instructions were spot on… Even for this senior citizen grandma… Was able to fix my faucet in short order… Thank you thank you thank you

Very helpful, I'm a single female and I rely on videos like this to help do my own repairs, I even installed my own dishwasher a few years ago, it's still going strong. Your video was clear and easy to understand. thank you!!!

@DiyRick66

Жыл бұрын

Thanks & good luck 🤞

Best video by far! He offered answers to questions I wouldn't have known to ask. He filled in all the blanks. Great job!

@DiyRick66

5 ай бұрын

Glad it was helpful!

This could be the best drippy faucet repair video on You Tube!💯

@DiyRick66

5 ай бұрын

Wow, thanks!

I love how you explained things like the direction of the spring and how the bottom of the cartridge covers the water inlet. I redid the left faucet that was still leaking after my earlier attempt, snugged down the nut a little better and I think you helped me solve the problem! 74-year old woman!

@DiyRick66

7 ай бұрын

Glad it helped & good luck. 🤞👍

Best overall coverage of all issues in replacing these stems. Excellent.

I've never commented on a video before but HAD to leave a comment to let you know how thankful I am for this video! After I took apart my sink the rubber cap on top of my spring had come off unbeknownst to me. Couldn't get my sink to turn off and got beyond frustrated knowing I HAD to be missing some piece from when I took it apart but had no clue what. This video saved me (and helped me fix the leak). Thank you!!!

@DiyRick66

4 ай бұрын

I'm glad I could help you with your install. 🤞👍

Thank you for sharing your knowledge. This video saved me a lot of money I would have spent on a plumber. I was able to go to my local plumbing supply store and get the replacement cartridges and fix my leak myself.

@DiyRick66

Жыл бұрын

Glad it helped

THANKS!! Just the right level of practical info for a home repair! My faucet is identical to the one you fixed, so it all applies to my repair!

Hey Rick, I have reviewed a few of the other videos on this subject and I have to say that this specific one on Delta/Perless was the Most through in comparison. It may have been longer than some of the others, but it Also covered the subject of possibly fixing or upgrading the individual Stem Cartridge which of the ones that I watched did Not review at the same time. I do not how old this video is (from my submission date), But IMHO, you did a bang-up talk and in helping all of us. A Big Thank You ! !

@markyg124

5 ай бұрын

I agree with the above. I saw two other videos which SKIPPED videoing important steps or just quickly glossed over the removal and replacement of the spring and seat without clearing showing what was being done.. Thanks for showing the details.

I liked the history it helps when they have no labels

@DiyRick66

10 ай бұрын

Thanks. Good luck. 👍🤞

Thanks! Exactly what I needed to know. 2 carts installed in no time.

Thank you for putting this together brother, appreciate you! 🙏🏼👍🏼😊

You are AWESOME!!! I fixed my faucet following your instructions 🙌🏼 rolled the dice on the part! Mine didn’t have a number identifier of any kind! I matched all areas by eyeballing the details lol! Saved some money 💰!!! I pray many blessings for you and yours!!!!❤

@DiyRick66

Жыл бұрын

Glad it worked. 🙏🤞👍

Great Teacher. This is a keeper. A thorough job well done. My new BFF.

Thank you. This video made me feel a little bit easier about doing the job

You saved me some money, thanks. My faucet was still leaking after switching out the cartridge, however it was the grommet with the spring that was causing the leak and I would have never figured it out if it weren't for your video.

@DiyRick66

2 жыл бұрын

Your welcome. 🤞👍

YES. Finally! The info you noted about the water feeding through on the side of the handle rather than centered with the handle was an especially helpful piece of info that I had not seen in any of the numerous other videos for faucet fixes. I strongly suspect that may explain the issue with my water dripping through the spicket when my cold water handle that swings a little "too far" back when turning off. After watching your video, I'm realizing the moon shaped opening on the bottom of the cartridge for the water feed like the one you've shown is probably just misaligned inside my handle and needs to be rotated or replaced. I will find out for sure shortly. Thank you for the helpful video!

@DiyRick66

2 жыл бұрын

👍🤞

Wish i woulda found your video first...would have saved me an extra trip or two to the hardware store. Thank you for the extra details and tips!

@DiyRick66

3 жыл бұрын

I hope it helps. 🤞

Great job. Very thorough. And a bit of a history lesson to boot!

@DiyRick66

3 жыл бұрын

Glad you enjoyed it!

Thanks mate, only video I've seen that explained the direction of the springs and rubber cap. Saved my ass fixing a handle exploding at 1am; somehow those damn caps ended up on the window ledge instead and took hours of assembling with just the spring before finding your video to understand why the water was on full blast no matter where the handle was when I reassembled it.

@DiyRick66

Жыл бұрын

Glad I could help you out. Thanks for watching. 🤞👍

Thanks for the video. I grew up in the Philly/Jersey area and detect familiarity in your accent.

@DiyRick66

Жыл бұрын

Delaware now South Carolina 😊

Thank you so much! Your video was a big help. I followed your instructions and just now finished replacing the valve's in my bathroom faucet that had been leaking for the last couple of months. No more dripping, works like new.

@DiyRick66

3 жыл бұрын

Great job!

Thank you for the info. Before I found your video I had an order on the Delta website shopping cart for $38.64 for a Cartridges and a Seats & Springs. After seeing your video, I decided to order the repair kit using the Amazon link you provided $3.73, it worked like a champ. That was a $35 savings and it was so easy to do. Thank you!

@DiyRick66

Жыл бұрын

🤞👍

Great video!..I’m a single mother an this 100000% fixed AND helped me get this job done!...Thnk You tons Sir.,,,,,I Really hope you get to feeling better as well,,,prayers from me to yours❤️hang in there ok

@DiyRick66

3 жыл бұрын

You're welcome!

Thanks so much! I looked at others but they didn’t mention the springs and such! I was able to do it! Thanks so much you are the best!!!!

@DiyRick66

3 жыл бұрын

Appreciate the thumbs up. Glad it helped you. 🤞

Excellent video.....i found that the best way is to use the 27 inches harbor freight long socket to remove retaining nut

@DiyRick66

6 ай бұрын

Great tip! 🤞👍

Thank you so much for your help!! Bless you!! Would not have been able to do it myself without your help!

@DiyRick66

3 жыл бұрын

Thanks for the Thumbs Up.

Thank you so much. I was thinking I needed to buy a new faucet until I saw your video. It helped me a lot.

@DiyRick66

3 жыл бұрын

🤞

excellent video. and i really appreciate all the details...even the reminder to keep a rag under your tools so as not to scratch the counter.

Excellent tutorial! My cold water wasn't shutting off so i believe the cartidge is the problem. Im guuna attempt this repair & if i run into probs, hand it off to my husband 😂.

@DiyRick66

11 ай бұрын

Thanks for watching good luck. 👍🤞

glad you uploaded this man, now I know how to fix the leak in my bathroom, thank you

@DiyRick66

2 жыл бұрын

Awesome....Thanks & 🤞

Thanks for posting. I'm a pretty handy guy but have never taken one of these apart. Appreciate the video and you sir!

@DiyRick66

3 жыл бұрын

Awesome....good luck. 🤞

Thanks so much! Perfect walk through of exactly what I was looking for. Cheers!

@DiyRick66

3 жыл бұрын

You are welcome. Thanks for watching. 🤞

Excellent how to video! Nice & detailed with layman's language.👍 🔧

@DiyRick66

3 жыл бұрын

Appreciate the feedback & thumbs up. Good luck. 🤞

Thank you for sharing! You make a great teacher.

@DiyRick66

4 жыл бұрын

Appreciate it. Good luck.

You did a great job! Thank you very much! Hopefully my repair goes as well. Your video has the added benefit of taking some of the mystery and fear out of doing these types of repairs. Take care and thank you again from all of us.

@DiyRick66

2 жыл бұрын

Thanks 👍🤞

@MrJimmy-ox7fq

2 жыл бұрын

@@DiyRick66 Thank you again!! Just finished my repair for $7.38 thanx to your good counsel (2 new seat/springs and a tube of silicone grease). The part of your video where you explained how to troubleshoot where the leak was coming from is what did it for me. Keep up the good work! Stay safe!

@DiyRick66

2 жыл бұрын

@@MrJimmy-ox7fq Glad I could help. Sorry sometimes my videos get long because I have a lot of information to share. 😉

Learned a lot about my faucets here, thanks!

Very informative. It looks like you did a little switcheroo on the handles at one point.

@DiyRick66

7 ай бұрын

Switched them for a better view. Glad it helped. 👍🤞

I went with the Danco 3S-8H/C cartridge replacement item number 18590B. It had everything. Cost was around $10. Thank you so much for posting this video. Like you, my hot side was leaking. You made it very easy to repair it myself. For what it is worth, that kit with 5 replacement cartridges is no longer available for some reason at Lowe’s. I went to several stores. Nobody has it

@DiyRick66

3 жыл бұрын

Good luck & Thanks for The Thumbs Up. 👍

Hey, thank you! Very concise and well explained. You covered all the little tricks that made it easy.

@DiyRick66

Жыл бұрын

Glad it helped. Thanks for watching. 🤞👍

Thank u so much! I've got some leaky faucets on a fixture very similar. This will save me a ton of money!

@DiyRick66

3 жыл бұрын

🤞

Thanks I was finally able to fix the problem with my bathroom faucet

@DiyRick66

4 жыл бұрын

You are very welcome & glad I could be some help. 😉

Thanks, this was so well explained. I have a leaky delta faucet (cold water side) and now I know what to get.

@DiyRick66

2 жыл бұрын

,👍🤞

Thanks for video, i haven't taken a faucet apart in years so those carthridge things are new to me. Now i know what to get to replace them. Thank you

@DiyRick66

2 жыл бұрын

👍🤞

Thank you! This helped me repair my faucet.

@DiyRick66

3 жыл бұрын

You are welcome. Glad it helped. 👍

Thanks. Helped a lot. Was ready to replace the faucet.

@DiyRick66

2 жыл бұрын

Glad I could help. Good luck. 🤞👍

Awesome informative video. Great tip using the awl to line up the spring/grommet. Mucho thanks amigo.👍

Thank you - this helped a lot. Got my drip fixed. This design exemplifies the triumph of engineering over common sense. Used to be we squished a rubber washer between two pieces of bronze. Clearly, that was entirely unworkable.

@Joe_Goofball

2 жыл бұрын

Now, that sounds a little sarcastic, Bud...

Thank you, I learn a lot from your instruction. OORAH!!

Very Good video, I will be working on my dripping bathroom lavatory faucet soon. this helps me a lot. Thanks I appreciate it.

@DiyRick66

3 жыл бұрын

Good luck!

The screwdriver to help with the spring and the gromit was simply brilliant. Thank you. Why did the handles change ( from chrome to white) around the 15 minute mark and then change back to chrome-nickel?

Buddy, you just saved me a bunch of money! Most appreciated!

@DiyRick66

Жыл бұрын

Nice......glad I could help you. 🤞👍

Thank you. My spring and rubber thingy was really hard to seat. The only way I could get it in there was to get it mostly in then I used a small nail while holding it down to tuck in the the little part of rubber that kept sticking out.

Great job. Description and options clear. Easy job but you made it easier

@DiyRick66

3 жыл бұрын

Thanks For The Thumbs Up & Good Luck. 🤞

Thank you so much for your video ! I was able to fix my leaking faucet !!!:):) You are the best !:)

@DiyRick66

2 жыл бұрын

Glad I could help you. 🤞

Thank you so much brother, really helped me out

@DiyRick66

3 жыл бұрын

You're welcome!

Great video. Replaced myself!

@DiyRick66

3 жыл бұрын

Glad it helped!

Thank you. I appreciate the thorough explanation of everything you were doing. I feel empowered!

Love the extra history content.😉😊

Great video. Thank you so much for all your clarity & your time.

@DiyRick66

Жыл бұрын

You are very welcome. Thanks for watching & please share & subscribe. 🤞👍

Thanks for the video! It really helped.

@DiyRick66

3 жыл бұрын

You're welcome!

$2.98 for the 88101 kit...replaced all seals...all set...works like new... THANK YOU

@DiyRick66

3 жыл бұрын

Glad it works. 🤞

Super easy to follow step by step. Thank you!

@DiyRick66

8 ай бұрын

Glad it helped you. 🤞👍

Thank you! Great attention to detail

@DiyRick66

9 ай бұрын

Thanks & Good luck 🤞

Absolutely great vid 👍 ty!!!!!

@DiyRick66

3 жыл бұрын

Appreciate it. Thanks for the Thumbs Up.

Thank you. Great video.

@DiyRick66

3 жыл бұрын

Glad you liked it!

This was very helpful for me, thank you so much!

@DiyRick66

5 ай бұрын

Glad it helped!

Thanks great video!

Thanks for this video! I bought the repair kit to replace the O rings but didn't know what the springs and rubber grommets were for until I watched your video. The rubber grommets ended up being the cause of the issue in my case. Great tutorial!

Excellent. Very helpful with good tips.

@DiyRick66

Жыл бұрын

Thanks. 🤞👍

Great and simple video, very easy instructions.

@DiyRick66

2 жыл бұрын

Thanks 👍

Perfect demo. Thanks.

@DiyRick66

2 жыл бұрын

Appreciate it. Thanks & good luck 🤞👍

It helps me a lot. Thank you so much.

@DiyRick66

5 ай бұрын

Glad it helped!

Great video ! Thanks !

@DiyRick66

3 жыл бұрын

🤞

Very best explanation on you tube, greatly appreciate you taking the time to explain

@DiyRick66

Жыл бұрын

Thanks & good luck 🤞👍

My first time changing the seat & spring and we're drip-free again. We used a chopstick. Thanks!

Clear and well done!

@DiyRick66

Жыл бұрын

🤞👍

Thanks 👍🏻😎 it helped me out 👍🏻

@DiyRick66

3 жыл бұрын

Glad to hear it!

Thanks, working on mine tonight. Have a double sink and they both started leaking yesterday

@DiyRick66

3 жыл бұрын

Good luck!

@paulslovacek449

3 жыл бұрын

@@DiyRick66 Got them fixed

@DiyRick66

3 жыл бұрын

@@paulslovacek449 Nice job. 👍

thank you!!

Very good. Thanks !!!

@DiyRick66

Жыл бұрын

Thank you too!

This was so so helpful. I was able to take in apart, carry the part to the hardware store, get the appropriate item and replace it in the faucet with no problems. It was so easy. Do you have one on how to install a on and off valve for under the sink? I’m a female looking for something very very simple and basic. Thanks

Fantastic tutorial..... Much appreciated.......

@DiyRick66

3 жыл бұрын

🤞

good explanation, thanks

@DiyRick66

3 жыл бұрын

Glad you liked it

Thanks!!

I’m done with Delta Peerless. Getting that Grommet on is a pain in the ass. I could use a new one anyway. I’m switching over to Price Pfister. Good job on the video though

That was a really good video my wife says. She can fix it then, I’m going back to bed.

@DiyRick66

3 жыл бұрын

Thanks. LMBO. Good luck to both of you. 🤞

Love your shirt by the way!

@DiyRick66

7 ай бұрын

Thanks 👍

Thank you so much.

@DiyRick66

2 жыл бұрын

Your welcome. 👍🤞

Thank you!

@DiyRick66

3 жыл бұрын

🤞

Thanks!

@DiyRick66

3 жыл бұрын

No problem!

I have an imitation peerless, and it is over 10yrs old. the problem is the screw is loose but will not come out of the handle. The handle would turn but not pop out. Any suggestion(s) would be appropriate.

good job

@DiyRick66

3 жыл бұрын

👍🤞

Any tips for a cartridge that snaps in half?

What if you turn off both and it is still dripping?

Why do you have to turn the handle 90 degree in order to remove it?

This was a great video!!! Very informative and easy to follow. I really liked when he said it the leak is coming from here it's this, if not it's this. I have the same leak on a Delta bath tub, wonder if it's the same size?? I'll run him down and found out. ;)

@DiyRick66

Жыл бұрын

Good luck 🤞👍

I love watching it lol I