Thanks Kory! Invaluable resource and guide here. I was scratching my head on how to do it til I saw this.

Thanks man. You saved my money.

Thanks a lot! Your video helped me to change the rear breaks from the first time.

You’re awesome. Thanks.

Geat video! appreciate the instructions>>>

so cute with your kid asking what you are doing :)

@KorysRides

2 жыл бұрын

I have a video of him helping to sand down some brake pads too

What is the part # rear brake pads I have 2013 zero s use same brakes.Ty

Is there any way to check the life left in your current ones without taking them out? I’ve got about 8000 miles on the originals..

@KorysRides

Жыл бұрын

They are visible without taking anything off. It's obvious where the metal backing plate ends and the friction material starts. If it's not obvious it's time to replace them.

What did you do about the clip to keep the bass from bouncing around? Mine came out and I can’t get it back in

@DIYPhil

10 ай бұрын

Looks like he does not have it on. Take a look at other videos and you can clearly see how that clip is supposed to go in.

Is it normal for the pads to always have pressure/ constantly on the rotor even with no brake applied?

@KorysRides

Жыл бұрын

Pressure enough to cause braking to occur? No. Pressure as in the pads are not loose? Yes. It is normal for the pads to constantly ride against the disc

Bought the pads from EBC and is to thick to slide both in so now I got old and new so hopefully the new one wear down wear down😅

@KorysRides

Жыл бұрын

Push the piston back into the caliper and install two new ones

@user-ki1ys5wz1q

Жыл бұрын

@@KorysRides the piston is all the way back I don’t feel like file the pad down measure the pads 10.46 mm to 10.51 mm

@user-ki1ys5wz1q

Жыл бұрын

@@KorysRides what is your pad part #?I have 2013 Zero S my is TT2182FF Nissin and I can’t find it no where

Et le ressortir 😮

@KorysRides

3 ай бұрын

The only French I know are the lyrics to Megadeth's song 'A Tout Le Monde'