Just a tip if it leaves the top two not moving it might be because the lever is placed on the side closest to the door because it does that sometimes or it only happened to me

@tomspencer4855

2 жыл бұрын

thanks that tip helped me out a ton

@randomguy-fv6tu

2 жыл бұрын

@@tomspencer4855 👍

@Darkspike780

Жыл бұрын

Me to

@greencheese4645

Жыл бұрын

I’m watching now but it will prob help

@TGHD_TTV

Жыл бұрын

how can this be solved?

For people returning to this video i suggest putting obsidian on the outside of the observers that are faceing the other observers 7:10

@mkdistrict

Жыл бұрын

It helped with stoping the blocks getting stuck

@Rocks-zo7qi

24 күн бұрын

bro you saved me I love you so freaking much 🥲

@Peeeeeeslosh

16 күн бұрын

wait can you explain a little more

i tried this on 1.20 and for some reason the pistons only retract 2 blocks instead of 3, it works but essencially it is a 4x6 door

It works still in 1.21, and that's amazing! Thank you

@elad.s.e.7592

Ай бұрын

how did you place the observer? i cant sneak mode mid air even if i use shift + space... 4:50

I just watched the 4 by 4 door by you yesterday and it was amazing so I liked this one during the intro bc ik it is going to be great also

Man, I fr thought this was gonna work. The top piston was just.. not moving. Literally felt like I broke into shards of glass.

@BarikiwaBaby-kl8bb

6 ай бұрын

Same but I just added a repeater somewhere

5:14 beautiful explanation of arrow direction based on east west north south.

I am on java and this work amazing

Thank you for making this video this door is perfect for the build I’m trying to achieve

I made this in my world and I just love the way it closes btw do you have any ideas on elevators that go really far down?

@ScottyO

2 жыл бұрын

You can make any elevator go really far up and down. I will get working on trying to make a working elevator

@deaconuniverse5710

2 жыл бұрын

I’d honestly use a magma block and soul sand elevator

@kingkelkont7418

2 жыл бұрын

@@deaconuniverse5710 it was more to give the impression of a secret layer you know

@deaconuniverse5710

2 жыл бұрын

@@kingkelkont7418 ahh makes sense

@sarahlittlewood759

2 жыл бұрын

I hate your videos

Worked for me on Bedrock 1.20+. Had some trouble with one of the sides only retracting 2 blocks, not 3. I spent a while replacing the observers, but eventually realized the problem was that I didn’t have a few of the repeaters on the correct tick. My advice for this issue: double-check every repeater, THEN start fiddling with the observers. Great video.

@Currykane you should wear a zombie onesie! :)

I am suprised it is still working even in 1.21, I usually skip over old tutorials but this one gave me hope. Love the tutorial

@Kiks-j8j

Ай бұрын

How

I’m wondering two things, One: is it possible to use a button Two: Is it possible to put a wall on both sides?

@ScottyO

2 жыл бұрын

Use a t flip flop or pulse extender and sadly no because of the redstone

Thx I did this for a Zamboni door in my hockey rink

Anyone if you have trouble at the top it might be because the Redstone doesn't have enough power btw so add a repeater at the the right beside the corner on 1 tick to give it more power😊

@DiegoPimentel-rq1dw

Жыл бұрын

❤

Love everything about this door but I was wondering if there is a way to make the last bit of the opening smooth? Looking for 2 doors opening kinda look.

I finally did it :) so happy to have a door that works in bedrock for my realm with friends

thank you so much bro ive been looking for a working door but none of them works so i am so greatful for your channel

he is the best redstoner ever!!!

OMG TYSMMMMMMMMMMMM, THIS IS SOOOOOOOOOO AMAZINGG

Thx

@Currykane how do I make this still work by covering both sides of the honey/slime blocks? Do I make the honey/slime block side one block wider to fit the door blocks in between the obsidian and honey/slime blocks? Thanks. Keep up the great work.

Sick it was great and work damn good

Thanks so much, you are literally the best person that gives tutorials.

here before 10k 😎

@ScottyO

3 жыл бұрын

My man :D

Thanks for the toutorial man! I double checked every thing for hours because the door only worked half the time. Only to find out my tick speed was off 😅

Helpful. I spent so much tume trying to make one myself but ut wasn't working out, you just earned yourself a new sub.

Still OG worked so good ❤

Hello, so I am planning to start a smp with a few of minecraft bedrock youtubers and streamers like myself and so im messaging you to see if you may be interested. The smp is inspired after a java server called 1House SMP and it basically involves all of the players having to live and build in 1 interconnected house which would lead to alot of fun shenanigans. The smp wouldn't start until sometime in October or November because we are still looking for players as we only have 6 right now and were aiming for around 10. So if you think you may be interested or want more details let me know! :3

@bobbinagrande4790

3 жыл бұрын

How big would you have to be to join? Like follower wise? Because I don't stream or do KZread videos but it would be fun to join, I do have some friends with more followers then me I could always ask about but I was wondering if I could join? I'm on ps4

@ScottyO

3 жыл бұрын

Hey PNAPE! I’m sorry but I am going to have to decline your offer. I don’t have the time currently. Sounds like fun and wish you the best of luck with it

@batmanfan229

3 жыл бұрын

@@ScottyO a 7×7 lol

@PNAPE

3 жыл бұрын

@@ScottyO ok thanks if you ever get less busy dm me on discord and let me know bc we wont be starting this till October or November and it wouldn't require you to ne insanely active

@PNAPE

3 жыл бұрын

@@bobbinagrande4790 follower wise mostly doesnt matter, but we are only looking for some yters and mabye some streamers

I absolutely love this design! I'm trying to build it in my world, but I'm having a small issue. When I test either side, everything but the top two door blocks moves. When I checked to see what is wrong, I noticed that the redstone signal isn't reaching the final repeater at the top, but I've examined the design & haven't come across any excess redstone dust that I may have put down that would make the circuit too long. Any advice for this?

@louisquartersson4555

Жыл бұрын

Maybe put another repeater a little back?`

@britsniper3217

Жыл бұрын

@@louisquartersson4555 what you even mean man

@jerrydern595

Жыл бұрын

I had that problem I just put the red stone where he put the lever when opening up the one side of the door

Love your vids

It really worked thank you

Could you where the llama please 🙏

Thanks this rly helped me

love all of your skins

i did this 5 separate times, i followed the directions EXACTLY. 2 annoying blocks wont move :(

works on java but you should make a vid to make a t flip flop cuz i got no idea how to make one in the door after watching your pulse extender and t flip flop video.

Thanks for the tutorial it helped me so much!

Tysm!!!

U remembering this in 2023 me trying to make it before without watching this failed than making after watching vid beautiful

Thank you sir, Putting a material list helps so much. You are amazing

KING OF REDSTONE BEDROCK

@emjaypalin6986

2 жыл бұрын

does it work on bedrock

Thanks for help!!

Hey my problem is: I build 2 Of these Doors and 1 has the problem that the 2nd most lowest doesn't fully open (left side looking from the inside). The 2nd door has the problem that the last stage won't open which makes it so it has 1 side sticking out (also left side looking from the inside). I fully copied everything so I don't get what the problem is

Just an fyi, this does work on java. At least on 1.20

Thank you for this tutorial!

thank you so much your the best (and also it works the same on java)

Im making this door for our prison and im about to build it ill tell u when it worked i hope it would

@yellowradio5276

2 жыл бұрын

Did it work?

@ch0ok02

2 жыл бұрын

@@yellowradio5276 yep it worked perfectly

@yellowradio5276

2 жыл бұрын

Did you build it in Bedrock?

Any way to get this to be updated to use buttons to open and Close them instead of Levers?

I only watched half and I made it all I am so thankful for this yt channel you make the best tutorials the others yt channels make it so hard

The first 3 honey of left no not extend, what should I do

This door makes me happy

@charlie2006

2 жыл бұрын

I'm trying to build base and I couldn't find a big red stone door that would work on bedrock, this helps me SOOOOOO MUCH thank you

My friends and I are building giant bases in our survival, and I've got plenty of nether quartz ore and fortune 3, so the 7 stacks and 56 observers I'll needs for the blast doors in my Stargate compound will be no problem. Looking forward to using this tutorial!

@SumgaPi

2 жыл бұрын

You got any tips on how to get tons pf quartz without an elytra?

@timothymaddux9018

2 жыл бұрын

@@SumgaPi I'm no professional mc KZreadr, but the nether wastes seem to be the best place to mine for quarts (just mine what you can see. Strip mining is more time consuming). The trip on foot is worth it if your portal doesn't immediately spawn in a nether waste (I've yet to fly in the nether come to think of it...). I just recommend bringing a few silk touch pickaxes, because if you mine with fortune right away, your inventory will fill up too fast. Anyways, I'll usually manage to get about 25 stacks of quartz ore in an hour, which can be fortune mined back in the overworld.

@SumgaPi

2 жыл бұрын

@@timothymaddux9018 Nice, never heard of that tip, thanks. Prob gonna check out the biome and see if its in my nether area

Thank you so much bro, you disserve a subscribe and 👍

Thank you so much

This is the way of the doors

I subbed

Love You Mate

After a day of tweaking the design for it to work with a 5x6 door I finally got it

I'm on Java and the door system still works.

I have made 6x6 5x5 from watching your videos so I want get a video on a 7x7 piston door tutorial if you can make a tutorial on it I will watch it learn a lot redstone fro you

"the arrows do not matter" 2 seconds later: "the arrows should be pointing in-"

Make a...........Mustache onesie

love this content making bank valt would be different

Can verify working on bedrock 1.19.51. In the video he puts the innermost repeater down and on the first one says no ticks then the next two he says 1 tick- 1 tick = 0 clicks. Do all three no “click”/1tick. So from closest to the door out is repeater no click, 2 repeaters 3 clicks, repeater 2 clicks, repeater no click. Then on the top layer put a repeater next to the glass block to strengthen the signal for the last repeater.

I love your videos smash sub

I used an other redstone connection tho but it’s so it stays open when I click a button and when I click a other button on the other side it closes

@legitscaryturtle7379

2 жыл бұрын

Yeah i also used another connection becayse for some reason the redstone doesnt power the repeater

I like your video and I did everything correctly but It doesn't work in my bedrock edition on my Xbox one but on the bright side I got inspired to do my own sliding doors I mean it was fun building your design and had fun watching your video and have a good day 👍😁😎

dude your awesome because i was trying to do a 7x7 some type of like a circle but i always got that wrong so i was like ik you would be better because i never missed up on your vids but after i try the thing and it didn't work like there was 2 block there and i when you said there are supposed to be 4 red torch and i realize that i only put 3

Works Great, keep up the good work :)

i finished building someone elses 5x5 door with the triple piston extender and screamed when i saw this

i did everything correct but when i flip lever none of the slime or honey blocks ever get pulled back does this work in 1.18?(edit) it pulls the entire 3x6 structure towards the pistons 1 block

@ScottyO

2 жыл бұрын

Are you on bedrock edition? Is your obsidian all in the correct spots? And are you building out of solid blocks where you need to build out of solid blocks?

this does also work on java 1.19!

The slime blocks and honey blocks aren’t sticking together for me what do I do?

hey Great Tutorial I Tested It On Java And It Works! Just To Let You Know Great Video

glazed terracotta can be moved by pistons though no? oh maybe its a difference in java and bedrock

Am I able to make this work with pressure plates instead? I would be very happy to know I could

Cool

Br[poopoo I love your videos😁

It works some times others 1 part only moves 1 block I've spent hours trying EVERYTHING it still has that bug does it work in experiments for wild

@vidkid7508

2 жыл бұрын

Please I don't want to give up on this really cool door

@ScottyO

2 жыл бұрын

Are you sure the repeater timings are the same for all?

@BlizzardFox19

2 жыл бұрын

@@ScottyO thanks the repeater was not timed I have lots of respect for you you reply comments on your amazing videos and you should do a fox skin some time

@ScottyO

2 жыл бұрын

Thank you, I appreciate it. Happy I could help :)

Cow onesie

mine only works for two blocks and i don't know what i did wrong. it could be something about the observers or maybe i got the measurements wrong, but this is frustrating me. do you have any solutions?

The left side of the door wont close fully I did everything right

For a onesie animal: I would do a pig, in honour of Tecnoblade.

Bro I made this castle and it’s needs a big door it’s a 12x7 but this 6x6 looks way better then what I been trying to make

just gonna throw it out there before i build, it's not chunk dependant? and will work on bedrock 1.18?

Thx for the door kinda breaks tho in 1.19

Bro can you build 8*8 piston door in MCPE 1.18. (FROM INDONESIA)

Mine doesn’t work but my repeaters only go to three tics is that why?

Scottyo Is The best for bedrock edition minecraft redstone

I used the structure block to copy that one said and paste it to the other side!

Time to flex on my friends

Just so you know your creations do work on java you only need a few simple adjustments that even a baby can see

Love this design! Is there any way I could increase the size of it or does the design only fit a 6x6?

@spiritironplayz4245

Жыл бұрын

nice question

i cant find the ending so both levers can shut and open but i dont know how

Day 4 of waiting for rainbow axolotl suit

creeper onesie would be cool

@notkingkevin1057

3 жыл бұрын

CREEPER AWWW MAN

@ScottyO

3 жыл бұрын

AWWWWWW MAN

this does work on java i just tried it and its perfect.

Could This is work in Minecraft bedrock...???

@ScottyO

3 жыл бұрын

All my tutorial are for Minecraft Bedrock… so yes :)